NXP Semiconductors

TJA1052IT/2518 - Isolated High-Speed CAN Transceiver | NXP

MPN: TJA1052IT/2518 ✓ פעיל
16 pins Package
כמות הזמנה מינימלית: 1 |

TJA1052IT/2518 סקירה

NXP Semiconductors TJA1052IT/2518 is a galvanically isolated, high-speed Controller Area Network transceiver in a 16-pin SO package. It provides the physical-layer interface between a CAN protocol controller and the two-wire CAN bus, with isolation intended to separate high-voltage and low-voltage portions of electric-vehicle and hybrid-electric-vehicle systems.

A CAN transceiver is an interface IC within the broader controller-area network communication hierarchy. A CAN protocol controller generates and interprets CAN frames, while the transceiver converts that digital information into electrical signaling on the physical bus. Galvanic isolation adds a barrier between the controller side and bus side, helping protect low-voltage electronics when the two domains operate at different potentials.

The TJA1052i family is specifically designed around automotive isolation requirements. Its principal attributes include high-speed CAN operation, galvanic isolation, a two-wire physical bus interface, and a 16-pin SOIC package. The exact bus data rate, isolation withstand rating, supply-voltage range, loop delay, propagation delay, and temperature limits should be confirmed in the NXP manufacturer datasheet before final qualification.

The isolated architecture is especially useful in electric vehicles and hybrid electric vehicles, where a traction or auxiliary subsystem may be separated from a low-voltage controller by hundreds of volts. Isolation can reduce the need for a separate high-voltage CAN interface and allows a controller operating from a low-voltage rail to communicate with a high-voltage CAN bus. PCB creepage, clearance, capacitor ratings, and isolation-barrier construction remain the dominant layout considerations.

Typical applications include battery-management communications, inverter and motor-control interfaces, vehicle body and comfort controllers, industrial isolation links, and other CAN networks where the controller and bus may sit at substantially different ground potentials. The TJA1052IT/2518 is particularly relevant when an existing design requires a high-speed isolated CAN physical layer in the 16-pin SO footprint.

For implementation, use the manufacturer datasheet pin-description table and isolation-layout guidance rather than inferring connections from package position. Place isolation-barrier components directly across the designated isolation pins, maintain the required creepage and clearance distances, and keep the CAN bus and isolation-side return paths separated from sensitive circuitry.

This product page combines the manufacturer's function description and datasheet link with lifecycle status, engineering application guidance, pinout availability, and drop-in replacement information. It helps engineers distinguish the TJA1052i from non-isolated CAN transceivers and from isolation-oriented alternatives that require different pin or qualification decisions.

חלופות תחליף ישיר עבור TJA1052IT/2518 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם TJA1052IT/2518 (אותו גורם צורה וטביעת רגל) — שונים ב Product Type.

Texas Instruments
Product Type: Galvanically isolated CAN FD transceiver

TJA1052IT/5Y

✅ Drop-In
📦 16-SO
Same 16-SO footprint and isolated high-speed CAN function; automotive-grade order-code suffix differs by 0% in package geometry

📋 חלופה להתייחסות (לא בקטלוג)

TJA1052IT/2Y

✅ Drop-In
📦 16-SO
Same 16-SO footprint and isolated high-speed CAN function; qualification order-code suffix differs by 0% in package geometry

📋 חלופה להתייחסות (לא בקטלוג)

ISO1042DW

✅ Drop-In
Texas Instruments
📦 16-SO
Galvanically isolated CAN FD transceiver · 5 Mbps · 1 Mbps · ISO 11898-2:2016 · ±70 V DC · ±30 V · 152 ns · 1.8 V to 5.5 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

ISO1042-Q1

✅ Drop-In
📦 16-SO
Same 16-pin package geometry but multiple pin functions differ and automotive qualification differs, affecting pinout review across up to 4 of 16 pins

📋 חלופה להתייחסות (לא בקטלוג)

TJA1052IT1

✅ Drop-In
📦 16-SO
Same TJA1052IT family and 16-SO isolated CAN transceiver format; order-code suffix differs by 0% in package geometry

📋 חלופה להתייחסות (לא בקטלוג)

TJA1052IT/2518 מפרטים

Product Type Galvanically isolated high-speed CAN transceiver, 1 device
Supported Network Controller Area Network, 1 CAN bus
Physical Bus Two-wire CAN bus, 2 conductors
Isolation Function Galvanic isolation between controller and bus sides, 1 isolation barrier
Package Pin Count 16 pins
Package Type SOIC, 16 pins
סוג הרכבה Surface mount
Target Application Segment Electric and hybrid electric vehicles, 2 vehicle architectures
Manufacturer Order Code TJA1052IT/2518, 1 order code

מדריך תצורת פינים של TJA1052IT/2518 soic, 16 pins

תצורת פינים עבור TJA1052IT/2518 (מארזת soic, 16 pins). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת soic, 16 pins עבור TJA1052IT/2518

אין נתוני פריסת פינים מפורטים עבור TJA1052IT/2518.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

TJA1052IT/2518 מתאים עבור 6 יישוםs: Electric-Vehicle Battery Management CAN, Hybrid Vehicle Inverter Communication, Traction and Motor-Control CAN Interface, Automotive Body and Comfort Network, Industrial High- and Low-Voltage CAN Link, Charging and Auxiliary Power CAN Network.

🚗

Electric-Vehicle Battery Management CAN

The TJA1052IT/2518 fits a battery-management CAN connection where the low-voltage control electronics must communicate across a high-voltage isolation boundary. Its 16-pin SO package contains a galvanically isolated, high-speed CAN physical-layer interface for the two-wire vehicle bus. Placing the device between the controller and the traction-side bus helps isolate the domains without replacing the CAN frame architecture. The main engineering check is that the isolation voltage, supply requirements, timing limits, and automotive qualification meet the battery system's constraints. PCB design must preserve the datasheet's creepage, clearance, capacitor, and copper-barrier requirements.

🚗

Hybrid Vehicle Inverter Communication

The TJA1052IT/2518 is suitable for a hybrid-electric inverter or power-conversion module that communicates through CAN while operating at a potential separated from the vehicle controller. The device provides a galvanically isolated, high-speed interface to a two-wire CAN bus in a 16-pin SO package. This allows the inverter controller and vehicle network to retain a defined isolation boundary. Design verification should compare the module's bus rate, supply domains, common-mode environment, and fault requirements with the NXP TJA1052I datasheet. The layout must also keep high-voltage and low-voltage copper within the prescribed isolation boundary.

⚡

Traction and Motor-Control CAN Interface

The TJA1052IT/2518 can serve as the isolated physical-layer interface for a traction inverter, motor controller, or gate-driver supervisory channel that communicates over CAN. Its high-speed isolated CAN function bridges a digital controller and the two-wire vehicle network while separating their electrical domains. The 16-pin SO package is particularly useful when an existing vehicle PCB reserves that footprint. Engineers should confirm maximum bus rate, propagation delay, loop delay, supply tolerance, and isolation rating against the motor-control timing budget. External bus protection and correct end-of-network termination remain necessary for reliable operation.

🚗

Automotive Body and Comfort Network

The TJA1052IT/2518 can be evaluated for body, comfort, and auxiliary CAN networks that require isolation from a high-voltage subsystem. The isolated interface retains the physical two-wire CAN architecture while providing a 16-pin surface-mount device suitable for compact automotive electronics. Compared with a non-isolated transceiver, its key design value is the separation between controller-side and bus-side domains. Qualification must include the exact vehicle environmental requirements, wake/sleep behavior, bus fault handling, and protection strategy. The component is most appropriate where the isolation barrier has already been incorporated into the system architecture rather than added only as a layout afterthought.

🏭

Industrial High- and Low-Voltage CAN Link

The TJA1052IT/2518 can bridge a high-speed CAN controller and a physical two-wire CAN bus in industrial equipment where the bus and controller operate at different ground potentials. Although NXP targets EV and HEV systems, the galvanically isolated interface can support industrial isolation applications after its electrical and environmental limits are verified. The 16-pin SO package simplifies integration into compact controller boards. Designers should review isolation withstand voltage, transient immunity, bus common-mode limits, supply sequencing, and temperature range. The PCB isolation zone must be based on the manufacturer layout guidance rather than visual separation alone.

⚡

Charging and Auxiliary Power CAN Network

The TJA1052IT/2518 can support CAN communication in charging equipment or an auxiliary power domain where a low-voltage controller must remain separated from a high-voltage or externally exposed bus. The high-speed, galvanically isolated physical layer works with a two-wire CAN network and fits a 16-pin SO footprint. Its use can simplify system partitioning by allowing the communication controller to operate from its own supply domain. Before implementation, verify the charging system's bus rate, isolation lifetime, fault-energy exposure, and protection component requirements. Maintain the prescribed clearance and creepage across the barrier and use appropriately rated barrier capacitors.

סיכום מוצרים מומלצים

TJA1052IT/5Y Same-family 16-SO isolated CAN transceiver בשימוש ב-: Electric-Vehicle Battery Management CAN, Traction and Motor-Control CAN Interface, Charging and Auxiliary Power CAN Network TCAN330DCNR Texas Instruments בשימוש ב-: Electric-Vehicle Battery Management CAN, Charging and Auxiliary Power CAN Network ISO1042DW Texas Instruments בשימוש ב-: Hybrid Vehicle Inverter Communication, Industrial High- and Low-Voltage CAN Link TJA1052IT/2Y Same-family isolated CAN transceiver for qualification review בשימוש ב-: Hybrid Vehicle Inverter Communication, Automotive Body and Comfort Network TJA1052IT1 TJA1052IT family ordering variant בשימוש ב-: Traction and Motor-Control CAN Interface ISO1042-Q1 Automotive-grade isolated CAN transceiver alternative בשימוש ב-: Automotive Body and Comfort Network TCAN334DCNT Texas Instruments בשימוש ב-: Industrial High- and Low-Voltage CAN Link
What is the TJA1052IT/2518?
The TJA1052IT/2518 is a galvanically isolated, high-speed CAN transceiver from NXP Semiconductors for connecting a CAN controller to a physical two-wire CAN bus. According to the NXP TJA1052I manufacturer datasheet, the device is specifically targeted at electric-vehicle and hybrid-electric-vehicle systems where an isolation barrier is needed between high-voltage and low-voltage portions of the system.
What type of package does the TJA1052IT/2518 use?
The TJA1052IT/2518 is a 16-pin surface-mount SOIC device. The related TJA1052IT/5Y listing identifies the family as a 16-SO transceiver, and the NXP product page groups TJA1052IT under the TJA1052i family. Use the manufacturer pin-description table when assigning signals because isolated transceiver pins must be connected according to their isolation-domain functions rather than by signal-name assumptions.
TJA1052IT/2518 datasheet PDF and pinout location
The official TJA1052i manufacturer datasheet is available at the NXP document link on this page, and it contains the authoritative pin-description and application information. The TJA1052IT/2518 is the orderable designation for the 16-pin TJA1052i variant. Use the pin table in that datasheet to identify controller-side, bus-side, supply, ground, and isolation-barrier connections before laying out the PCB.
What is the difference between TJA1052IT/2518 and a non-isolated CAN transceiver?
The TJA1052IT/2518 includes galvanic isolation between the CAN-controller side and the physical CAN-bus side, while a conventional non-isolated transceiver connects those domains through a common ground. According to the NXP TJA1052I manufacturer datasheet, this isolated arrangement is intended for EV and HEV systems where high- and low-voltage sections require a separation barrier.
Is TJA1052IT/2518 suitable for electric-vehicle CAN networks?
Yes, the TJA1052IT/2518 is specifically suited to EV and HEV networks requiring galvanic isolation between high-voltage and low-voltage systems. The NXP TJA1052I manufacturer datasheet identifies electric and hybrid electric vehicles as the principal target applications. Suitability for a particular bus still depends on meeting the device's specified supply, timing, isolation, and environmental requirements.
What can replace the TJA1052IT/2518?
The TJA1052IT/5Y and TJA1052IT/2Y are the closest same-family NXP options listed with the identical 16-SO package and isolated high-speed CAN function. The TJA1052IT/2518 can also be evaluated against ISO1042DW and ISO1042-Q1, but compatibility must be checked at the pin and qualification level. The TI E2E discussion notes that ISO1042 uses different pin functions for several positions, so physical fit alone does not prove an unqualified drop-in replacement.
Is ISO1042DW a drop-in replacement for TJA1052IT/2518?
ISO1042DW is a candidate for a TJA1052IT/2518 redesign, but it should not be treated as automatically equivalent without pin-by-pin review. The TI E2E compatibility discussion states that the 16-pin packages are compatible and that an ISO1042 standby-related position is instead a no-connect, while another discussion identifies additional pin differences. Verify isolation ratings, bus timing, electrical levels, and unused-pin handling before substitution.
When should I choose TJA1052IT/2518 over TJA1052IT/5Y?
Choose TJA1052IT/2518 when it matches the exact qualified order code and environmental requirements established for the vehicle platform. Choose TJA1052IT/5Y when its grade, qualification, and ordering documentation satisfy the system requirements and the existing BOM can be updated to that exact MPN. Both retain the 16-SO isolated CAN-transceiver format, but the order-code suffixes must be reviewed rather than treated as interchangeable by default.
Is TJA1052IT/2518 the same as ISO1042-Q1?
No, the TJA1052IT/2518 and ISO1042-Q1 are different manufacturer products even though both are associated with isolated CAN physical-layer designs and may use related 16-pin packages. The TI E2E compatibility thread specifically discusses TJA1052IT/5 compatibility with ISO1042-Q1 and identifies pin differences. Confirm the manufacturer pin tables and qualification requirements before considering either device as the replacement.
What are the key specifications of TJA1052IT/2518 that engineers should know?
The key confirmed characteristics are galvanic isolation, high-speed CAN operation, a two-wire physical bus interface, an intended EV/HEV application focus, and a 16-pin SOIC package. The NXP TJA1052I manufacturer datasheet is the controlling document for maximum data rate, supply range, timing, isolation withstand, temperature range, and detailed electrical limits. Those numeric limits should be captured during design qualification.
Where can I request a quote for TJA1052IT/2518?
Use the Request a Quote form on this page to request the current TJA1052IT/2518 price, stock position, lead time, and minimum order quantity. The manufacturer lists the TJA1052IT family as active, but current commercial conditions can change independently of lifecycle status. State the exact order code, quantity, and required delivery date when submitting the request.
Is TJA1052IT/2518 in stock and what is its lead time?
Stock and lead time should be confirmed through the Request a Quote form on this page. The NXP product page identifies TJA1052IT as active, which indicates current product-family availability but does not guarantee inventory for every package or order code. For production planning, request the exact TJA1052IT/2518 quantity, date code requirements, and shipment destination with the quotation.
How should the isolation barrier be laid out around TJA1052IT/2518?
Place the isolation-barrier components directly across the designated isolation pins and preserve the minimum creepage and clearance distances stated in the NXP manufacturer datasheet. Keep the bus-side copper, isolation return connections, and protective components away from sensitive controller-side circuitry. Do not route copper beneath the isolation barrier unless the manufacturer guidance expressly permits it.
Can TJA1052IT/2518 communicate with a standard non-isolated CAN controller?
The controller-side interface of the TJA1052IT/2518 can connect to a suitable CAN controller, while the bus side remains galvanically isolated from that controller domain. Interface voltage levels, supply domains, timing, standby behavior, and bus termination must all match the controller and CAN network design. The isolation does not alter the basic two-wire CAN frame protocol.
Why is the CAN bus termination important with TJA1052IT/2518?
A CAN physical bus requires correct termination at both ends to establish the intended signal levels and suppress reflections. The TJA1052IT/2518 connects to the physical two-wire bus but does not remove the need for board-level termination. Use the bus topology, termination values, stub-length limits, and protection recommendations from the NXP manufacturer datasheet and the applicable CAN system design guidance.

נתוני עזר הנדסיים עבור TJA1052IT/2518 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose TJA1052IT/2518 when the existing vehicle or industrial design already uses this exact NXP order code and its qualification, isolation, and environmental requirements remain valid. Prefer TJA1052IT/5Y or TJA1052IT/2Y when the 16-SO footprint and TJA1052i function fit but a different automotive grade or ordering designation is required. Consider ISO1042DW for a controlled redesign because its 16-pin geometry is attractive, but review the changed standby or no-connect behavior and verify every electrical parameter. ISO1042-Q1 is relevant when automotive qualification is important, but the documented pin differences require a full schematic and layout review. TJA1052IT1 is useful when a TJA1052IT family variant is acceptable. No alternative should be approved from package appearance alone; isolation voltage, timing, supply, bus behavior, qualification, and PCB constraints govern the final choice.

השוואה עם חלופות

פרמטר מוצר זה TJA1052IT/5Y TJA1052IT/2Y ISO1042DW ISO1042-Q1 TJA1052IT1
Package 16-SO 16-SO 16-SO 16-pin SO package 16-pin SO package 16-SO
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors Texas Instruments Texas Instruments NXP Semiconductors
Primary Function Galvanically isolated high-speed CAN transceiver Isolated half CAN transceiver High-speed CAN transceiver Isolated CAN transceiver Isolated CAN transceiver TJA1052IT family CAN transceiver
Isolation Galvanic isolation Galvanic isolation Galvanic isolation Galvanic isolation Galvanic isolation Galvanic isolation
Pin-Function Compatibility NXP TJA1052i 16-pin assignment Same family and package assignment Same family and package assignment Standby-related pin becomes no-connect Multiple pin differences require review Same family and package assignment
Target Application Electric and hybrid electric vehicles Automotive isolated CAN application Automotive isolated CAN application Isolated CAN applications Automotive isolated CAN applications TJA1052IT family automotive application

מבדילים עיקריים

  • Same-family replacement preserves the NXP isolation architecture (לעומתISO1042DW)
  • Automotive-grade option remains in the same NXP footprint (לעומתTJA1052IT/2Y)
  • Direct TJA1052IT family continuity (לעומתISO1042-Q1)

הערות תכנון

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The manufacturer datasheet and product page establish the device function and automotive isolation use, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not available for extraction. The related ISO1042-Q1 name does not establish qualification status for the NXP target.

הנתונים אומתו בתאריך: 2026-11-14 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

tja1052it 5y nxp tja1052it 5y datasheet tja1052it datasheet nxp tja1052it TJA1052IT/2518 datasheet pdf TJA1052IT/2518 pinout TJA1052IT/2518 equivalent TJA1052IT/2518 replacement TJA1052IT/2518 cross reference TJA1052IT/2518 vs ISO1042DW TJA1052IT/2518 16-SO footprint TJA1052IT/2518 price TJA1052IT/2518 stock NXP TJA1052IT/2518 isolated CAN

רכיבים ומונחים קשורים

NXP Semiconductors TJA1052IT/2518 TJA1052IT TJA1052IT/5Y TJA1052IT/2Y TJA1052IT1 ISO1042DW ISO1042-Q1 Texas Instruments CAN transceiver Controller Area Network physical-layer interface galvanic isolation high-speed CAN two-wire CAN bus electric vehicle hybrid electric vehicle battery management system traction inverter automotive electronics SOIC 16-SO surface mount isolation barrier CAN protocol controller
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר