Texas Instruments

TLV2252IP - Dual Rail-to-Rail Low-Power Op Amp | Texas Instruments

MPN: TLV2252IP ✓ 啟用中
Low-voltage, low-power Vdss 34 µA typical Id PDIP (P), 8 pins Package
MOQ: 1 |

TLV2252IP 概覽

Texas Instruments TLV2252IP is a dual, rail-to-rail, low-voltage, low-power operational amplifier in an 8-pin PDIP package. The device provides two amplifier channels, rail-to-rail output swing, a typical supply current of 34 µA per channel, input bias current of 1 pA, and input voltage noise density of 19 nV/√Hz at 1 kHz. Its specified operating temperature range is -40°C to +125°C.

An operational amplifier is an analog signal-conditioning semiconductor that amplifies the voltage difference between its non-inverting and inverting inputs. The TLV2252 belongs to the operational-amplifier, analog-IC, and signal-conditioning hierarchy. It is designed for low-voltage circuits where low supply current, low input bias current, and output operation close to the supply rails are useful.

The TLV2252 family's key features include output swing that includes both supply rails, low noise, and very low input bias current. According to the TLV2252 product documentation, the 19 nV/√Hz typical input noise density at 1 kHz is suitable for low-level analog signal conditioning. The 1 pA typical input bias current is especially relevant to sensors and transducers whose output impedance is high.

The TLV2252IP combines two amplifiers in one PDIP package, allowing a differential or noninverting amplifier, an instrumentation-style signal chain, or two independent analog channels. Its low-power operating current supports battery-powered and portable equipment, while the -40°C to +125°C temperature range allows use in industrial and automotive-temperature environments when the complete system meets its applicable qualification requirements.

Typical uses include sensor-interface amplification, low-frequency filter stages, portable instrumentation, audio input conditioning, and general-purpose analog signal processing. Two independent channels can also implement differential gain, active filtering, or gain stages where board area is constrained. The rail-to-rail output can improve dynamic range in low-voltage systems by allowing the output to approach the supply limits more closely than a conventional non-rail-to-rail amplifier.

When laying out a board, use the manufacturer pin-description table to assign inputs, outputs, and supply pins, and place the decoupling capacitor close to the positive and negative supply terminals. Verify the required output swing against the load and input common-mode range before selecting resistor values or relying on full-scale operation. Stable operation with capacitive loads should be confirmed using the guidance in the manufacturer datasheet.

This product record combines manufacturer ordering information, temperature and package details, low-noise and low-bias-current characteristics, practical application guidance, and a package-conscious comparison with potential replacements. These engineering details help distinguish a true pin-compatible substitution from a merely similar low-power operational amplifier.

直接替換替代品,適用於 TLV2252IP — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

TLV2252AIP

✅ 直接替換
📦 PDIP (P), 8 pins
Revised A-version family member; key electrical limits must be checked because the revision may change specifications by up to 10%

📋 參考替代品(不在目錄中)

TLV2452IP

✅ 直接替換
📦 PDIP (P), 8 pins
Related dual rail-to-rail family with potentially different bandwidth and slew-rate limits; low-power behavior may differ by up to 30%

📋 參考替代品(不在目錄中)

TLV2452AIP

✅ 直接替換
📦 PDIP (P), 8 pins
A-version of the related TLV2452 family; speed-related characteristics may differ by up to 30% from the TLV2252IP

📋 參考替代品(不在目錄中)

TLV2462AIP

✅ 直接替換
📦 PDIP (P), 8 pins
Related dual rail-to-rail family with different speed and static-power characteristics; differences may reach 30%

📋 參考替代品(不在目錄中)

TLC2252AIP

✅ 直接替換
📦 PDIP (P), 8 pins
Closely related dual CMOS operational amplifier; supply current, bandwidth, and offset limits can differ by up to 30%

📋 參考替代品(不在目錄中)

TLV2252IP 最大額定值與電氣特性

Amplifier Type Dual operational amplifier
Number of Channels 2 channels
Output Topology Rail-to-rail output
Supply Class Low-voltage, low-power
Supply Current per Channel 34 µA typical
Input Bias Current 1 pA typical
Input Voltage Noise Density 19 nV/√Hz typical at 1 kHz
工作溫度範圍 -40°C to +125°C
封裝 PDIP (P), 8 pins
安裝類型 Through-hole

TLV2252IP pdip (p), 8 pins 腳位配置指南

TLV2252IP(pdip (p), 8 pins 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

TLV2252IP 的 pdip (p), 8 pins 封裝腳位圖

無詳細腳位定義資料: TLV2252IP.

請參閱 資料表 以查看完整腳位配置。

典型應用

TLV2252IP 適用於 6 應用s: Portable Sensor Signal Conditioning, Industrial Process Measurement, Low-Power Audio Input Stage, Precision Filter and Gain Stage, Battery-Powered Data Acquisition, General-Purpose Analog Interface.

📱

Portable Sensor Signal Conditioning

The TLV2252IP is appropriate for battery-powered sensor interfaces because the dual amplifier consumes 34 µA per channel typically and offers 1 pA typical input bias current. That low bias current limits the error introduced by high-source-impedance sensors, while the 19 nV/√Hz typical input noise density at 1 kHz supports weak-signal conditioning. A practical implementation uses one channel for amplification and the second for filtering or buffering. The rail-to-rail output improves available signal range in low-voltage systems, although the amplifier's input common-mode limits must be respected during startup and sensor transitions.

🏭

Industrial Process Measurement

The TLV2252IP can condition low-level industrial process signals when low power and input bias current are more important than high bandwidth. Its 1 pA typical input bias current reduces loading on high-impedance probes, and the 19 nV/√Hz typical noise density at 1 kHz helps preserve small measurement signals. The -40°C to +125°C operating range supports equipment deployed across wide ambient conditions. Place both amplifier channels close to their signal sources or use one for differential gain and one for active filtering. Verify input common-mode behavior, output swing, and capacitive-load stability in the completed analog path.

🎧

Low-Power Audio Input Stage

The TLV2252IP can serve as a low-power audio preamplifier or line-stage amplifier where the source impedance is relatively high. The 19 nV/√Hz typical input noise density at 1 kHz and 1 pA typical input bias current are useful for preserving weak audio information, while rail-to-rail output swing can provide greater headroom in single-supply equipment. Gain can be set with conventional feedback resistors, with the second channel available for an output buffer or active filter. The design should account for the amplifier's exact bandwidth, slew rate, output swing, and capacitive-load behavior before targeting the required audio bandwidth.

🔧

Precision Filter and Gain Stage

Both channels in the TLV2252IP can implement active filters or cascaded gain sections in compact analog modules. A 34 µA typical supply current per channel helps limit total power when both sections are active, and the low-noise input stage is beneficial when the filter processes signals close to the measurement floor. Use stable resistor and capacitor values and keep the summing node compact to minimize parasitic feedback. Because the available family members differ in bandwidth and slew rate, verify that the selected amplifier remains stable at the intended gain, operating frequency, and capacitive loading of the filter.

🖥️

Battery-Powered Data Acquisition

The TLV2252IP is suitable for low-power data-acquisition front ends that amplify sensor or transducer outputs before conversion. The dual-channel configuration provides two conditioned outputs from one 8-pin PDIP package, reducing board area, while 34 µA typical current per channel supports longer operating time in portable instruments. Its 1 pA typical input bias current minimizes disturbance of high-impedance sources, and rail-to-rail output helps maximize the range of a low-voltage converter input. The system designer should confirm input common-mode range at startup, output settling, and ADC acquisition timing.

🔧

General-Purpose Analog Interface

The TLV2252IP provides a practical dual-amplifier building block for instrumentation, interface boards, and educational or industrial control modules. Rail-to-rail output operation is useful when the signal must span much of a low-voltage supply range, while low supply current supports compact systems with limited thermal budgets. One channel can serve as a noninverting amplifier and the other as a voltage follower, or the channels can form a differential stage. The engineer should use the manufacturer pin configuration and complete electrical limits to establish polarity, gain, common-mode range, and output loading before releasing the PCB design.

What is the TLV2252IP?
The TLV2252IP is a dual, low-voltage, low-power operational amplifier from Texas Instruments. It uses an 8-pin PDIP package, provides rail-to-rail output swing, consumes 34 µA per channel typically, and has a 1 pA typical input bias current. According to the Texas Instruments TLV2252 product page, it is intended for general-purpose, low-voltage analog signal-conditioning applications.
What are the key specifications of TLV2252IP that engineers should know?
The TLV2252IP combines two amplifier channels in an 8-pin PDIP package with rail-to-rail output swing. Its headline characteristics are 34 µA typical supply current per channel, 1 pA typical input bias current, and 19 nV/√Hz typical input voltage noise density at 1 kHz. The manufacturer specifies an operating temperature range of -40°C to +125°C, making the device suitable for low-power analog designs across industrial temperature grades.
What is the supply current of TLV2252IP?
The TLV2252 family consumes 34 µA of supply current per channel typically, as stated in the Texas Instruments TLV2252 family documentation. Because the TLV2252IP contains two amplifier channels, the total supply current depends on the operating mode of both channels. This low-power characteristic makes the device useful in portable instrumentation, battery-operated measurement systems, and other low-voltage analog products.
What is the input noise of TLV2252IP?
The TLV2252IP has a typical input voltage noise density of 19 nV/√Hz at 1 kHz. According to the TLV2252 family description, low noise is combined with a 1 pA typical input bias current and rail-to-rail output performance. These characteristics make the amplifier suitable for conditioning weak sensor signals where excessive input noise or bias-current error would degrade the useful measurement.
Is TLV2252IP suitable for sensor and high-impedance signal conditioning?
The TLV2252IP is well suited to high-impedance signal conditioning because its typical input bias current is only 1 pA. Combined with 19 nV/√Hz typical input noise density at 1 kHz and rail-to-rail output swing, it can process low-level sensor signals in low-voltage systems. The exact input common-mode range and bias-current limits should still be checked against the operating conditions of the selected amplifier grade.
What is the difference between TLV2252IP and TLV2252AIP?
The TLV2252IP and TLV2252AIP are closely related dual low-power operational amplifiers, and both can be ordered in the 8-pin PDIP format. The A designation indicates a revised device generation, so a production substitution should be checked for changes in electrical limits, test conditions, and ordering status. The TLV2252AIP is the more relevant candidate for a direct replacement review because it shares the target package.
TLV2252IP vs TLV2452IP - which is better for a low-power design?
The TLV2252IP is the better starting choice when low supply current is the primary requirement, because the manufacturer specifies 34 µA per channel typically and describes the device as low power. The TLV2452IP is a related rail-to-rail family that may offer different speed and electrical characteristics. Choose between them by comparing the complete datasheet limits, gain-bandwidth product, slew rate, and stability requirements for the intended circuit.
When should I choose TLV2252IP over TLV2452IP?
Choose TLV2252IP when your design prioritizes low power and low input bias current rather than maximum bandwidth. Its 34 µA typical supply current per channel and 1 pA typical input bias current are the decisive attributes for portable or high-impedance systems. Choose the TLV2452IP only when its higher-speed or other family-specific characteristics are needed and its operating conditions still satisfy the system requirements.
Is TLV2252IP suitable for single-supply and split-supply operation?
The TLV2252 family is fully specified for both single-supply and split-supply operation, according to the family description. Its rail-to-rail output can increase usable signal range in single-supply systems, while split-supply operation permits a centered zero-volt signal. Confirm the exact common-mode and output-swing limits for the operating conditions before designing the feedback network.
What can replace TLV2252IP?
The strongest same-manufacturer replacement candidate is TLV2252AIP because it retains the dual-amplifier, low-power, rail-to-rail design in the 8-pin PDIP format. TLV2452IP and TLV2462AIP are additional same-family candidates for evaluation. A replacement should be approved only after confirming pin assignment, supply range, common-mode range, output swing, noise, bias current, bandwidth, slew rate, and operating temperature.
What is the best STMicroelectronics equivalent for TLV2252IP?
The cross-reference search identifies a compatible STMicroelectronics alternative, but its exact manufacturer part number is not exposed in the available listing. A valid selection must therefore be matched to the TLV2252IP's 8-pin PDIP footprint and checked for pin compatibility, rail-to-rail operation, supply current, input bias current, noise, bandwidth, and temperature limits. Use the Texas Instruments cross-reference search or the Request a Quote form to obtain a production-ready candidate list.
Where can I download the TLV2252IP datasheet PDF?
The official Texas Instruments TLV2252 product page is the primary source for the TLV2252 family datasheet, ordering information, and quality documentation. The TLV2252IP ordering page identifies the device as an 8-pin PDIP variant rated from -40°C to +125°C. Use the manufacturer's Documents and Downloads section for the revision-controlled PDF, and consult the Request a Quote form on this page for availability and lead-time confirmation.
Where can I find the TLV2252IP pinout?
The TLV2252IP pin assignment is published in the pin-configuration section of the Texas Instruments TLV2252 family datasheet. The TLV2252IP uses an 8-pin PDIP package containing two operational amplifiers, so the drawing includes both amplifier channels, supply pins, and the exposed package orientation. Use that manufacturer drawing when assigning PCB nets and when validating a substitute rather than relying on a generic operational-amplifier footprint.
How should I decouple and lay out a TLV2252IP circuit?
Place the supply bypass capacitor physically close to the positive and negative supply pins, and keep the feedback components close to their corresponding amplifier pins. Route the inverting input as a short, low-impedance node to reduce parasitic feedback and oscillation risk. The TLV2252IP is intended for low-noise applications, so long input traces and nearby high-current switching paths should also be avoided.
Where to buy TLV2252IP online and what is its lead time?
Use the Request a Quote form on this page to request current TLV2252IP availability, lead time, and order handling for the exact 8-pin PDIP manufacturer part number. The TLV2252IP is shown by Texas Instruments as an orderable P-package variant with an operating range of -40°C to +125°C. Current stock, minimum order quantity, and production allocation should be confirmed at the time of quotation.

工程參考資料,適用於 TLV2252IP — 比較、設計指引及合規資訊。

選型指南

Choose the TLV2252IP when a dual, low-voltage amplifier is needed for battery-powered or portable signal conditioning and low input bias current is important. Its 34 µA typical supply current per channel, 1 pA typical input bias current, and 19 nV/√Hz typical noise density at 1 kHz make it a sensible fit for high-impedance sensors and low-level analog signals. Choose TLV2252AIP first for a revised same-family candidate in the same 8-pin PDIP format, but verify revised electrical limits before substitution. Consider TLV2452IP, TLV2452AIP, or TLV2462AIP when their speed-related characteristics better match the required bandwidth and settling behavior. TLC2252AIP is another dual CMOS option, although its supply current, offset, and noise must be checked against the target circuit. Confirm pinout, common-mode range, output swing, capacitive-load stability, and temperature requirements before production approval.

與替代品比較

參數 本產品 TLV2252AIP TLV2452IP TLV2452AIP TLV2462AIP TLC2252AIP
Package PDIP (P), 8 pins PDIP (P), 8 pins PDIP (P), 8 pins PDIP (P), 8 pins PDIP (P), 8 pins PDIP (P), 8 pins
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Amplifier Configuration Dual operational amplifier Dual operational amplifier Dual operational amplifier Dual operational amplifier Dual operational amplifier Dual operational amplifier
Number of Pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins
Mounting Type Through-hole PDIP Through-hole PDIP Through-hole PDIP Through-hole PDIP Through-hole PDIP Through-hole PDIP

主要差異化特點

  • Low supply-current characteristic within a dual amplifier (對比TLV2452IP)
  • Very low input bias current for high-impedance sources (對比TLC2252AIP)
  • Low-noise dual-channel integration in an 8-pin PDIP (對比TLV2462AIP)

設計說明

Assign the two channels from the manufacturer pin-configuration diagram and keep each inverting-input feedback loop compact. A long trace around the inverting node adds parasitic capacitance that can affect frequency response and stability. Place the supply bypass capacitor close to the device supply terminals, and route sensitive input traces away from switching nodes and high-current return paths to preserve the benefit of the low 19 nV/√Hz typical input noise density.

Do not assume that rail-to-rail output guarantees the amplifier can process every input voltage. Check the input common-mode range, output-swing limits, and load current across the intended supply range. The TLV2252IP is also fully specified for single-supply and split-supply operation, but startup transients can move a signal outside the normal input range. Use the manufacturer limits to define input and output clamping requirements for the complete circuit.

Estimated: with two channels operating at the typical 34 µA per-channel current and a 3.3 V supply, the amplifier's supply current contribution is approximately 68 µA and its calculated supply power is approximately 0.224 mW. Actual device power also depends on the input common-mode voltage, output stage activity, load, and leakage. Use this calculation for battery-budget estimation, then confirm the operating current under the real signal and load conditions.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The available manufacturer ordering information does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for the PDIP package. AEC-Q100 is not applicable to the standard TLV2252IP ordering code.

相關搜尋

TLV2252IP datasheet TLV2252IP datasheet pdf TLV2252IP pinout TLV2252IP specifications TLV2252IP equivalent TLV2252IP replacement TLV2252IP vs TLV2252AIP TLV2252IP vs TLV2452IP TLV2252IP PDIP-8 TLV2252IP application circuit Texas Instruments TLV2252IP TLV2252IP price TLV2252IP stock dual rail-to-rail op amp 34 uA

相關元件與詞彙

Texas Instruments TLV2252IP TLV2252 TLV2252AIP TLV2452IP TLV2452AIP TLV2462AIP TLC2252AIP operational amplifier dual operational amplifier analog integrated circuit signal-conditioning IC rail-to-rail output low-dropout operation low-voltage amplifier low-power amplifier CMOS LinCMOS input bias current input voltage noise density PDIP-8 through-hole package portable instrumentation high-impedance sensor interface single-supply operation
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情