Texas Instruments

TLV2341ID - Programmable Low-Voltage Op Amp | Texas Instruments

MPN: TLV2341ID ✓ 啟用中
2 V to 8 V Vdss 17 µA Id 8-pin SOIC Package
MOQ: 1 |

TLV2341ID 概覽

Texas Instruments TLV2341ID is a programmable, low-voltage operational amplifier designed for single-supply systems operating from 2 V to 8 V. Its 8-pin SOIC package contains one amplifier circuit, and its LinCMOS process supports low-voltage operation while maintaining low power consumption. The manufacturer characterizes the device at both 3 V and 5 V supplies, making it suitable for portable instruments, battery-powered systems, sensor interfaces, and low-voltage signal-conditioning circuits.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its differential inputs while providing high input impedance and low output impedance. The TLV2341 belongs to the broader hierarchy of operational amplifier, analog amplifier, signal-conditioning IC, and semiconductor. Its common-mode input range extends below the negative supply rail and toward the positive rail at 25°C, giving it useful flexibility in systems whose signals operate close to 0 V. Its output-voltage range also includes negative values under suitable supply and loading conditions.

The TLV2341's principal system feature is programmable supply current. Texas Instruments specifies selectable supply-current settings of 17 µA, 250 µA, and 1.5 mA. These settings correspond to slew-rate specifications from 0.02 V/µs to 2.1 V/µs at a 3 V supply. A low-current setting favors power-sensitive operation, while a higher-current setting provides greater dynamic capability. The maximum supply voltage is 8 V, and the device is expressly characterized at 3 V and 5 V, allowing designers to optimize speed and consumption for each operating condition.

The amplifier is particularly well suited to low-voltage single-supply designs because its input and output capabilities support signal levels near the supply rails. These characteristics are useful in portable measurement systems, low-cost sensor interfaces, battery monitoring, and control loops where a larger operating range would add unnecessary power or cost. Input bias current, offset voltage, bandwidth, noise density, output-current capability, and temperature-range details should be confirmed against the manufacturer datasheet for the exact operating conditions.

Because the TLV2341 can operate from a single positive supply while accepting signals near ground, its output and input common-mode behavior must be checked with the chosen supply voltage, load, and temperature. The programmable supply-current pin should be driven only with valid logic levels, and unused inputs should be terminated according to the datasheet guidance. Decoupling capacitors should be placed close to the supply pins, with the exact capacitance and stability requirements taken from the manufacturer's recommended application circuit.

This page combines manufacturer specifications, a parameter-by-parameter comparison, application guidance, and same-footprint replacement guidance. It is designed to help engineers distinguish genuine drop-in options from devices that merely share the SOIC outline but differ in supply-current programming, bandwidth, common-mode behavior, or electrical limits.

直接替換替代品,適用於 TLV2341ID — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

TLV2316ID

✅ 直接替換
📦 8-pin SOIC
Rail-to-rail input and output architecture replaces the TLV2341's three programmable supply-current settings; same 8-pin SOIC footprint

📋 參考替代品(不在目錄中)

TLV2317ID

✅ 直接替換 ⚠️ 規格未經驗證
📦 8-pin SOIC
Rail-to-rail input and output architecture replaces programmable supply current; voltage and dynamic-performance limits must be verified

📋 參考替代品(不在目錄中)

TLV2318ID

✅ 直接替換 ⚠️ 規格未經驗證
📦 8-pin SOIC
Same-package single-amplifier alternative with different rail-to-rail and bias-current characteristics; programmable-current feature is absent

📋 參考替代品(不在目錄中)

TLV2319ID

✅ 直接替換 ⚠️ 規格未經驗證
📦 8-pin SOIC
Same-package single-amplifier alternative with different input/output rail behavior and no three-level supply-current programming

📋 參考替代品(不在目錄中)

TLV9101ID

✅ 直接替換
📦 8-pin SOIC
1.1 MHz gain-bandwidth product and 16 V maximum supply versus the TLV2341's programmable-current operation; SOIC footprint retained

📋 參考替代品(不在目錄中)

TLV2341ID 最大額定值與電氣特性

Amplifier Type Programmable low-voltage operational amplifier
Number of Channels 1 channel
Supply Voltage Range 2 V to 8 V
Fully Characterized Supply Voltage 3 V and 5 V
Maximum Supply Voltage 8 V
Programmable Supply Current Setting 1 17 µA
Programmable Supply Current Setting 2 250 µA
Programmable Supply Current Setting 3 1.5 mA
Slew Rate at 3 V, Low-Current Setting 0.02 V/µs
Slew Rate at 3 V, High-Current Setting 2.1 V/µs
Common-Mode Input Range Extends below the negative rail and up to VDD at 25°C
輸出電壓範圍 Includes negative output voltage
Process Technology Silicon-gate LinCMOS
封裝 8-pin SOIC
安裝類型 Surface mount

TLV2341ID 8-pin soic 腳位配置指南

TLV2341ID(8-pin soic 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

TLV2341ID 的 8-pin soic 封裝腳位圖

無詳細腳位定義資料: TLV2341ID.

請參閱 資料表 以查看完整腳位配置。

典型應用

TLV2341ID 適用於 6 應用s: Battery-Powered Sensor Interface, Portable Measurement Front End, Low-Voltage Current Sensing, Industrial Control and Sensor Conditioning, Low-Power Audio and Communication Buffering, Programmable Low-Power Analog System.

🔋

Battery-Powered Sensor Interface

The TLV2341ID fits low-energy sensor interfaces because it operates from 2 V to 8 V and lets the designer select 17 µA, 250 µA, or 1.5 mA supply current. Place it in a noninverting or inverting amplifier stage ahead of an ADC, using the 17 µA setting when battery life is critical. Its input common-mode range extending below the negative rail and toward VDD at 25°C is useful when the sensor signal sits close to ground. Confirm input bias current and offset voltage against the sensor source impedance, and verify output swing for the selected supply and load.

📱

Portable Measurement Front End

Portable measurement systems benefit from the TLV2341ID's selectable supply-current levels, which allow a direct tradeoff between response speed and energy use. A 3 V system can operate at 0.02 V/µs for minimum consumption or up to 2.1 V/µs when faster transitions are needed. Use the amplifier to condition a low-level transducer signal before conversion or transmission. Its single-supply orientation simplifies portable instrumentation, while the common-mode range helps preserve signals near ground; output loading, input bias error, and noise must still be checked for the selected operating point.

⚡

Low-Voltage Current Sensing

The TLV2341ID can amplify a small shunt-derived voltage in a low-voltage current-sense circuit while preserving operation close to ground. The selectable 17 µA to 1.5 mA supply-current range permits power tuning after the required signal bandwidth is known. Configure the amplifier for the required gain, keep trace resistance low around the sense node, and verify common-mode limits over the full measured-current range. The manufacturer data characterizes operation at 3 V and 5 V, making these rails convenient baselines for design calculations.

🏭

Industrial Control and Sensor Conditioning

For a 5 V industrial control node, the TLV2341ID provides a single-supply amplifier with three supply-current choices for adapting to channel loading and update rate. A 250 µA setting offers a middle ground between the 17 µA low-power mode and the 1.5 mA high-drive mode. Use it to buffer a controller input, amplify a bridge or resistive sensor, or drive a feedback network. Its extended common-mode capability is valuable near the lower rail, but designers should verify input and output behavior at the actual temperature, supply tolerance, and load.

🎧

Low-Power Audio and Communication Buffering

The TLV2341ID can serve as a low-voltage buffer or gain stage in compact audio and communication equipment where supply consumption must be controlled. The 17 µA operating mode reduces system power, while the 250 µA and 1.5 mA modes provide greater slew capability for changing signal levels. Because this is a general-purpose low-voltage amplifier rather than an audio-specific device, verify output swing, distortion, noise, and stability for the actual load impedance and signal bandwidth. Grounding and decoupling layout are especially important when small signals pass through a common mixed-signal board.

🔧

Programmable Low-Power Analog System

The TLV2341ID is especially useful when one analog channel must adapt to multiple operating modes. The supply-current program can be raised for faster settling during measurement or lowered during standby, reducing the need for multiple amplifier variants. Set the programming pin only after checking its valid logic thresholds in the manufacturer datasheet. Provide local supply bypassing and avoid long high-impedance routes at the input. If the system needs greater fixed bandwidth, the TLV9101 family's 1.1 MHz gain-bandwidth product may be considered after a full stability and power comparison.

推薦產品摘要

TLV2316ID Low-voltage amplifier alternative with rail-to-rail input and output 用於: Battery-Powered Sensor Interface, Low-Power Audio and Communication Buffering TLV2341ID Texas Instruments 用於: Battery-Powered Sensor Interface, Low-Voltage Current Sensing, Programmable Low-Power Analog System TLV9101ID Higher-bandwidth low-voltage amplifier alternative 用於: Portable Measurement Front End, Industrial Control and Sensor Conditioning, Programmable Low-Power Analog System TLV2317ID Rail-to-rail single-supply amplifier alternative 用於: Portable Measurement Front End, Low-Power Audio and Communication Buffering TLV2318ID Single-supply amplifier candidate for rail-to-rail sensing 用於: Low-Voltage Current Sensing TLV2319ID Single-supply amplifier alternative for control and sensing stages 用於: Industrial Control and Sensor Conditioning
What is the TLV2341ID?
The TLV2341ID is a single-channel, programmable low-voltage operational amplifier from Texas Instruments, supplied in an 8-pin SOIC package. According to the TLV2341 manufacturer product page, it is optimized for low-voltage single-supply operation over 2 V to 8 V and is fully specified and characterized at 3 V and 5 V. Its selectable supply-current settings make it useful where designers must trade dynamic performance against power consumption.
What is the operating voltage of TLV2341ID?
The TLV2341ID operates from 2 V to 8 V, with a maximum supply voltage of 8 V. Texas Instruments states that the amplifier is especially suited to single-supply applications and is fully characterized at 3 V and 5 V. Designers should use those characterized supply voltages when the circuit depends on guaranteed common-mode, output-range, slew-rate, or stability behavior rather than merely operating within the wider allowable voltage range.
What are the key specifications of TLV2341ID that engineers should know?
The TLV2341ID combines a 2 V to 8 V supply range with three programmable supply-current settings of 17 µA, 250 µA, and 1.5 mA. According to the Texas Instruments TLV2341 product page, the corresponding slew-rate range at 3 V is 0.02 V/µs to 2.1 V/µs. The device also uses silicon-gate LinCMOS technology and is packaged as a single amplifier in an 8-pin SOIC.
How do I select the supply current on the TLV2341ID?
The TLV2341ID provides three programmable supply-current levels: 17 µA, 250 µA, and 1.5 mA. Texas Instruments identifies these settings as producing slew rates from 0.02 V/µs to 2.1 V/µs at a 3 V supply. Use the manufacturer pin-description table and logic-level table to determine the required programming state, and verify the resulting performance with the selected supply voltage and load.
Is TLV2341ID suitable for battery-powered sensor interfaces?
Yes, the TLV2341ID is suitable for battery-powered sensor interfaces when low-voltage and low-power operation are priorities. Its 2 V to 8 V supply range covers many single-cell systems, while the 17 µA programmable setting minimizes supply-current demand. The common-mode input range extends below the negative rail and up to VDD at 25°C, which is valuable when the sensor output lies close to ground.
Where can I download the TLV2341ID datasheet PDF?
The TLV2341ID datasheet PDF is available from the Texas Instruments product-support link for the TLV2341 family, with the manufacturer PDF linked from this page. Use the datasheet to verify the pin description, supply-current logic states, electrical characteristics, common-mode limits, output swing, package drawing, and recommended application circuit. The TLV2341ID suffix identifies the 8-pin SOIC orderable device.
Where can I find the TLV2341ID pinout?
The authoritative TLV2341ID pin assignment appears in the pin-configuration section of the Texas Instruments TLV2341 datasheet. Use that drawing when numbering the 8-pin SOIC footprint and assigning input, output, supply, and supply-current-programming functions. This page does not reproduce a separate pin table, so consult the manufacturer document before laying out tracks or assigning test points.
What is the best drop-in replacement for TLV2341ID?
The best drop-in replacement must match the 8-pin SOIC footprint, pin functions, supply-voltage range, and programmable-current behavior of the TLV2341ID. TLV2316ID and TLV9101 are identified as related replacement choices in the available cross-reference information, but each has a different electrical feature set. Confirm the exact suffix, pinout, supply limits, and programmable logic levels before approving any substitution for production.
Can TLV2316ID replace TLV2341ID?
The TLV2316ID is a close same-package replacement candidate for the TLV2341ID, but compatibility depends on the circuit requirements. Both are offered in an 8-pin SOIC configuration and appear in direct comparison resources. Their rail-to-rail input and output characteristics differ from the TLV2341's programmable-supply-current architecture, so verify bandwidth, noise, offset, supply limits, stability, and pin-level behavior before substitution.
When should I choose TLV2341ID over TLV2316ID?
Choose the TLV2341ID when the design benefits from three selectable supply-current settings and the associated range of 0.02 V/µs to 2.1 V/µs slew rate at 3 V. Choose the TLV2316ID when its rail-to-rail input and output characteristics better match the signal chain. The final decision should also consider current consumption, bandwidth, noise, offset voltage, and output-drive requirements.
TLV2341ID vs TLV2316ID - which is better for a low-voltage sensor interface?
The TLV2341ID is generally better when adjustable supply current is central to the design because it offers 17 µA, 250 µA, and 1.5 mA settings. The TLV2316ID is generally better when rail-to-rail input and output behavior is the priority. Both support low-voltage single-supply architectures, so compare the actual sensor output range, required gain-bandwidth, noise, offset, and load-driving demand.
Is TLV2341ID the same as TLV9101?
No. The TLV2341ID is a programmable low-voltage LinCMOS amplifier with selectable 17 µA, 250 µA, and 1.5 mA supply currents, while the TLV9101 is identified as a 1.1 MHz, 16 V, low-power operational amplifier. They may serve similar signal-conditioning roles, but they are not electrically identical and require full pin, voltage, bandwidth, noise, and stability comparison.
Where can I buy TLV2341ID online?
Use the Request a Quote form on this page to request current availability, lead time, and ordering details for the TLV2341ID. The manufacturer identifies TLV2341 as an active device, but project-specific stock and delivery schedules can change. Include your required quantity, target date, and acceptable shipment configuration so the request can be handled efficiently.
What is the price of TLV2341ID?
Current TLV2341ID commercial terms are presented through the Request a Quote form on this page rather than as a static price. Submit the required quantity and project details to obtain a current quotation and lead-time response. The page also distinguishes the exact TLV2341ID from related family members so the quotation is based on the intended orderable part.
What is the lead time for TLV2341ID?
The current lead time for TLV2341ID should be requested through the Request a Quote form on this page. Texas Instruments lists the TLV2341 family as active, but manufacturing availability and component allocation can vary by order quantity and date. Include a required delivery date and annual usage forecast so the supplier can respond with an actionable schedule.
Is TLV2341ID in stock?
The TLV2341ID is identified as an active Texas Instruments device, but live stock for a specific order quantity should be confirmed through the Request a Quote form on this page. Provide the quantity, packaging preference, target date, and shipping destination. This avoids relying on an outdated inventory indication when planning production or prototype procurement.

工程參考資料,適用於 TLV2341ID — 比較、設計指引及合規資訊。

選型指南

Choose the TLV2341ID when the system operates from 2 V to 8 V and the design needs the same amplifier to support multiple power-versus-speed modes. Its 17 µA, 250 µA, and 1.5 mA settings are especially useful in portable instrumentation, sensor interfaces, and adjustable-current control circuits. Choose the TLV2316ID when rail-to-rail input and output behavior is more important than programmable supply current. Consider the TLV2317ID, TLV2318ID, or TLV2319ID when their individual input, output, bias-current, and noise characteristics better match the signal chain. The TLV9101ID is appropriate when fixed bandwidth is the priority, since the family is identified as a 1.1 MHz, 16 V low-power amplifier. Before substituting any device, verify the exact SOIC pin assignment, supply limits, common-mode range, output swing, stability with the selected feedback network, and temperature-grade requirements.

與替代品比較

參數 本產品 TLV2316ID TLV2317ID TLV2318ID TLV2319ID TLV9101ID
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments

主要差異化特點

  • Three selectable supply-current modes (對比TLV2316ID)
  • Higher fixed gain-bandwidth product in the TLV9101 family (對比TLV9101ID)
  • Single-supply characterization at both 3 V and 5 V (對比TLV2317ID)

設計說明

Choose the TLV2341ID supply-current mode from the required settling speed and system power budget rather than treating all three settings as interchangeable. The manufacturer lists 17 µA, 250 µA, and 1.5 mA modes, corresponding to 0.02 V/µs through 2.1 V/µs slew rate at 3 V. Confirm the programming-pin voltage, valid logic state, load current, and minimum pulse width in the datasheet before using the control signal. State changes should occur while the amplifier is in a controlled operating condition.

Place the supply-bypass capacitor close to the positive and ground pins, and keep the amplifier input, feedback components, and sensitive source nodes away from switching paths. For low-current operation, long PCB traces can add leakage and resistance that disturb the intended power budget; for high-current operation, inadequate trace width can cause voltage loss and heating. Follow the manufacturer recommended layout and use the documented capacitance and ESR considerations when configuring the output feedback network.

Do not assume that the full 2 V to 8 V input range provides identical behavior at every supply voltage. The device is fully characterized at 3 V and 5 V, and input common-mode and output swing can vary with supply, temperature, load, and current setting. Check the exact operating point against the datasheet limits, especially when signals approach the negative rail or the positive supply rail. Avoid substituting a fixed-current amplifier without reassessing the programming pin.

For very low-frequency or high-impedance sensor interfaces, evaluate input bias-current error across temperature rather than relying only on nominal offset voltage. The input impedance seen from the source and any feedback-network resistance can create gain errors, and capacitive loading can affect settling. Keep the input path short, use practical resistor values, and verify the complete gain-versus-frequency response at the selected 17 µA, 250 µA, or 1.5 mA setting.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

Compliance status was not stated in the product-page, datasheet-index, distributor, or cross-reference information. AEC-Q100 qualification is not inferred from the industrial or general-purpose description.

相關搜尋

TLV2341ID datasheet TLV2341ID pinout TLV2341ID datasheet pdf TLV2341ID equivalent TLV2341ID replacement TLV2341ID cross reference TLV2341ID price TLV2341ID stock Texas Instruments TLV2341ID TLV2341ID 2V 8V op amp TLV2341ID 8-SOIC TLV2341ID programmable supply current TLV2341ID vs TLV2316ID TLV2341ID sensor interface TLV2341 application circuit

相關元件與詞彙

Texas Instruments TLV2341ID TLV2316ID TLV2317ID TLV2318ID TLV2319ID TLV9101ID Operational Amplifier Op Amp Analog Amplifier Signal-Conditioning IC Single-Supply Amplifier Programmable Supply Current LinCMOS Silicon-Gate CMOS 8-pin SOIC SOIC Family Surface Mount SMD Common-Mode Input Voltage Slew Rate Supply Voltage Low-Voltage Instrumentation Battery-Powered Sensor Interface Industrial Control
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情