TS3V340D - Quad SPDT 3.3V Video Switch | Texas Instruments
MPN: TS3V340D ✓ 啟用中TS3V340D 概覽
An analog video switch is an interface IC that routes high-frequency baseband video signals between a common output and one of two selectable inputs. Its switching architecture allows a source to be connected to a display, processing chain, test point, or other destination without duplicating the upstream signal source. The TS3V340 family combines video-signal switching with a 3.3 V supply, making it appropriate for modern low-voltage display and video-processing equipment.
The principal features of the TS3V340D include four switch channels, a 2:1 SPDT configuration per channel, low and flat on-state resistance, and high-bandwidth operation. The flat resistance characteristic helps reduce signal-level variation as the switch state changes. Its 16-pin SOIC package supports conventional surface-mount assembly while keeping the four-channel routing function in a relatively compact footprint.
Each independently controlled SPDT channel can connect its common terminal to either of two input terminals. This arrangement is useful for source selection, signal-path isolation, video test points, and routing between primary and backup signal paths. The manufacturer describes the TS3V340 as a 3.3 V, four-channel video switch with flat on-state resistance, while the TS3V340D ordering option is associated with the 16-pin SOIC package.
Typical uses include projector input selection, video observation systems, industrial inspection equipment, broadcast and presentation infrastructure, test and measurement systems, and consumer displays. Multiple switch channels can support several connections within one compact assembly, reducing the number of discrete routing components required on a video-oriented circuit board.
For implementation, route high-speed video traces as short and directly connected as practical, maintain a continuous ground reference beneath the signal path, and place the device close to the switching point. Control inputs should be driven from compatible 3.3 V logic, and unused inputs should be configured according to the manufacturer pin-description table. Verify timing, signal levels, and channel isolation in the final board environment.
This product summary combines the manufacturer device description with application-oriented guidance, package information, engineering cautions, and transparent sourcing information. It is intended to help designers evaluate the TS3V340D for 3.3 V video-routing tasks while separately checking the authoritative datasheet for complete electrical limits, timing, and pin assignments.
直接替換替代品,適用於 TS3V340D — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
TS3V340DR
✅ 直接替換📋 參考替代品(不在目錄中)
TS3V340DE4
✅ 直接替換📋 參考替代品(不在目錄中)
TS3V340DRE4
✅ 直接替換📋 參考替代品(不在目錄中)
TS3V340D 最大額定值與電氣特性
| 供應電壓 | 3.3 V |
| Number of Channels | 4 channels |
| Switch Configuration | 2:1 SPDT per channel |
| Total Switch Functions | 4 SPDT functions |
| On-State Resistance | Low and flat |
| Signal Bandwidth | High bandwidth |
| Product Type | Video switch IC |
| 工作溫度範圍 | -40 °C to +85 °C |
| 封裝 | 16-pin SOIC |
| 安裝類型 | Surface mount |
TS3V340D 16-pin soic 腳位配置指南
TS3V340D(16-pin soic 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: TS3V340D.
請參閱 資料表 以查看完整腳位配置。
典型應用
TS3V340D 適用於 6 應用s: Projector Video Source Selection, Industrial Inspection Video Routing, Test and Measurement Signal Selection, Presentation and Display Input Routing, Video Observation and Surveillance Routing, Broadcast and Studio Video Patch Routing.
Projector Video Source Selection
The TS3V340D fits projector and large-display designs that must route several 3.3 V video sources to a common processing or display path. Each of its four 2:1 SPDT channels can select between two inputs, reducing the number of discrete routing devices needed on the board. The family is characterized by low and flat on-state resistance, which helps limit level-dependent attenuation as the selected channel changes. Keep the switched traces short, provide a continuous ground reference, and place the IC close to the source-selection point. Because the package is 16-pin SOIC, the design must also account for normal analog-video routing constraints, including controlled return paths and avoidance of unnecessary stubs.
推薦
Industrial Inspection Video Routing
Machine-vision and inspection systems can use the TS3V340D to route live camera signals, test patterns, or alternate inputs into a common processing chain. Four independently selectable SPDT paths allow several signals to be managed in one compact 3.3 V interface IC. The high-bandwidth, low and flat on-state-resistance characteristics make the device appropriate for baseband video routing where consistent signal attenuation is important. Place the switch near the video connector or processor input, route ground as a continuous reference, and verify the complete signal path for crosstalk and reflections. The designer should also confirm the manufacturer timing and isolation limits against the inspection system’s line rate and switching requirements.
推薦
Test and Measurement Signal Selection
The TS3V340D can provide multiple signal-selection paths in test and measurement equipment that alternates between an operating signal and a reference or diagnostic source. Four 2:1 SPDT functions support compact routing arrangements around video test points, while the 3.3 V supply aligns with modern mixed-signal test platforms. Low and flat on-state resistance helps maintain a consistent signal level across switch states, although the final bandwidth and insertion-loss budget must be verified from the manufacturer datasheet. Locate the device near the measurement entry point, keep switch traces short, and avoid sharing sensitive video returns with unrelated high-current paths.
推薦
Presentation and Display Input Routing
Presentation systems, conference-room displays, and digital signage controllers can use the TS3V340D to select among primary and backup video inputs. The four-channel architecture provides several routing points without requiring four separate single-channel switch packages. Its low and flat on-state resistance is useful for maintaining predictable video levels, while the 16-pin SOIC package supports conventional surface-mount assembly. Place each switched net close to the destination connector or downstream receiver, maintain a low-impedance ground plane, and keep unused inputs configured as required by the manufacturer. Board-level validation should include source transitions, cable loading, and compatibility with the downstream video receiver.
推薦
Video Observation and Surveillance Routing
The TS3V340D is suitable for surveillance and observation equipment that must select between live camera outputs, recorded-video paths, or diagnostic signals. Four 2:1 SPDT channels can provide distributed routing in a compact 3.3 V design, helping reduce the component count compared with multiple discrete switches. The high-bandwidth video-switch positioning and flat on-state resistance support consistent signal transfer, but actual channel isolation and insertion loss must be checked against the camera format and cable length. Keep sensitive analog paths away from switching power nodes, use a continuous ground reference, and place decoupling close to the device according to the manufacturer recommendations.
推薦
Broadcast and Studio Video Patch Routing
Compact broadcast, studio, and production-monitoring systems can use the TS3V340D to route video feeds between primary and alternate paths. Its four independent SPDT channels support multiple selections within one package, while the 3.3 V operating voltage suits modern digital video infrastructure. The low and flat on-state-resistance characteristic helps reduce state-dependent level changes in baseband video routes. For professional installations, engineers should still validate bandwidth, isolation, insertion loss, and switching behavior against the actual video standard and cable network. The PCB should use short high-speed routing, a solid ground reference, and controlled return paths to preserve signal integrity.
推薦
工程參考資料,適用於 TS3V340D — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Brand | Texas Instruments |
| Package | 16-pin SOIC |
| Supply Voltage | 3.3 V |
| Number of Channels | 4 channels |
| Switch Configuration | 2:1 SPDT per channel |
| On-State Resistance | Low and flat |
| Signal Bandwidth | High bandwidth |
| Operating Temperature Range | -40 °C to +85 °C |
主要差異化特點
- Four independent SPDT routes in one package (對比Generic single-channel SPDT switch)
- Designed for high-bandwidth baseband video routing (對比General-purpose low-speed analog switch)
- Low and flat on-state resistance (對比Switch with resistance variation across states)
設計說明
Place the TS3V340D close to the video connector, source-selection point, or downstream receiver receiving the routed signals. Keep switched traces short and avoid adding test pads or stubs on sensitive video nets unless their effects have been evaluated. Route a continuous ground reference directly beneath the signal path and return connector grounds to the board ground plane rather than through the switch traces.
Use the manufacturer pin-description table to assign every terminal and preserve specified no-connect conditions. Control signals must be compatible with the device’s 3.3 V logic environment. For high-speed video routes, verify insertion loss, return loss, channel isolation, and crosstalk in the assembled board because package parasitics, connector geometry, and ground discontinuities can affect performance beyond the device specifications.
Do not treat a generic four-channel SPDT switch as a drop-in substitute without checking its pinout and electrical limits. Confirm supply voltage, control thresholds, bandwidth, on-state resistance, insertion loss, isolation, and switching timing against the TS3V340D requirements. Also validate unused-input states and control sequencing in hardware because incorrect static conditions can create unintended signal paths or excess current.
Keep the switched video paths separated from switching-regulator power nodes, high-speed clocks, and other noisy nets. Provide local supply bypassing and a low-impedance ground connection close to the IC. When the board includes both analog video and digital control circuitry, establish return-current paths so switching and control currents do not share the sensitive video reference segments.
合規資訊
Compliance status must be confirmed from the manufacturer product documentation and current declarations.