Texas Instruments

TS3V340D - Quad SPDT 3.3V Video Switch | Texas Instruments

MPN: TS3V340D ✓ فعال
3.3 V Vdss Low and flat Rds(on) 16-pin SOIC Package
حداقل سفارش: 1 |

TS3V340D نمای کلی

The Texas Instruments TS3V340D is a 3.3 V, four-channel video switch with four independent 2:1 SPDT switch functions, low and flat on-state resistance, and high-bandwidth signal routing in a 16-pin SOIC package. It is designed for compact systems that require controlled selection between two video signals for each of four channels.

An analog video switch is an interface IC that routes high-frequency baseband video signals between a common output and one of two selectable inputs. Its switching architecture allows a source to be connected to a display, processing chain, test point, or other destination without duplicating the upstream signal source. The TS3V340 family combines video-signal switching with a 3.3 V supply, making it appropriate for modern low-voltage display and video-processing equipment.

The principal features of the TS3V340D include four switch channels, a 2:1 SPDT configuration per channel, low and flat on-state resistance, and high-bandwidth operation. The flat resistance characteristic helps reduce signal-level variation as the switch state changes. Its 16-pin SOIC package supports conventional surface-mount assembly while keeping the four-channel routing function in a relatively compact footprint.

Each independently controlled SPDT channel can connect its common terminal to either of two input terminals. This arrangement is useful for source selection, signal-path isolation, video test points, and routing between primary and backup signal paths. The manufacturer describes the TS3V340 as a 3.3 V, four-channel video switch with flat on-state resistance, while the TS3V340D ordering option is associated with the 16-pin SOIC package.

Typical uses include projector input selection, video observation systems, industrial inspection equipment, broadcast and presentation infrastructure, test and measurement systems, and consumer displays. Multiple switch channels can support several connections within one compact assembly, reducing the number of discrete routing components required on a video-oriented circuit board.

For implementation, route high-speed video traces as short and directly connected as practical, maintain a continuous ground reference beneath the signal path, and place the device close to the switching point. Control inputs should be driven from compatible 3.3 V logic, and unused inputs should be configured according to the manufacturer pin-description table. Verify timing, signal levels, and channel isolation in the final board environment.

This product summary combines the manufacturer device description with application-oriented guidance, package information, engineering cautions, and transparent sourcing information. It is intended to help designers evaluate the TS3V340D for 3.3 V video-routing tasks while separately checking the authoritative datasheet for complete electrical limits, timing, and pin assignments.

جایگزین‌های drop-in برای TS3V340D — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

TS3V340DR

✅ جایگزین مستقیم
📦 16-pin SOIC (D)
Same quad-SPDT function and 16-pin SOIC (D) footprint; DR identifies the tape-and-reel packing configuration rather than a different electrical rating

📋 جایگزین مرجع (خارج از کاتالوگ)

TS3V340DE4

✅ جایگزین مستقیم
📦 16-pin SOIC (D)
Same 16-pin SOIC (D) terminals and quad-SPDT characteristics; E4 identifies the lead-free termination option while key ratings remain unchanged

📋 جایگزین مرجع (خارج از کاتالوگ)

TS3V340DRE4

✅ جایگزین مستقیم
📦 16-pin SOIC (D)
Same quad-SPDT function and 16-pin SOIC (D) footprint; combines the DR reel packing designation with the E4 lead-free termination option

📋 جایگزین مرجع (خارج از کاتالوگ)

TS3V340D حداکثر مقادیر مجاز و مشخصات الکتریکی

ولتاژ تغذیه 3.3 V
Number of Channels 4 channels
Switch Configuration 2:1 SPDT per channel
Total Switch Functions 4 SPDT functions
On-State Resistance Low and flat
Signal Bandwidth High bandwidth
Product Type Video switch IC
محدوده دمای کاری -40 °C to +85 °C
بسته‌بندی 16-pin SOIC
نوع نصب Surface mount

راهنمای پیکربندی پین TS3V340D 16-pin soic

پیکربندی پین برای TS3V340D (پکیج 16-pin soic). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 16-pin soic برای TS3V340D

داده پین‌آوت تفصیلی موجود نیست برای TS3V340D.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

TS3V340D مناسب است برای 6 کاربردs: Projector Video Source Selection, Industrial Inspection Video Routing, Test and Measurement Signal Selection, Presentation and Display Input Routing, Video Observation and Surveillance Routing, Broadcast and Studio Video Patch Routing.

📺

Projector Video Source Selection

The TS3V340D fits projector and large-display designs that must route several 3.3 V video sources to a common processing or display path. Each of its four 2:1 SPDT channels can select between two inputs, reducing the number of discrete routing devices needed on the board. The family is characterized by low and flat on-state resistance, which helps limit level-dependent attenuation as the selected channel changes. Keep the switched traces short, provide a continuous ground reference, and place the IC close to the source-selection point. Because the package is 16-pin SOIC, the design must also account for normal analog-video routing constraints, including controlled return paths and avoidance of unnecessary stubs.

🏭

Industrial Inspection Video Routing

Machine-vision and inspection systems can use the TS3V340D to route live camera signals, test patterns, or alternate inputs into a common processing chain. Four independently selectable SPDT paths allow several signals to be managed in one compact 3.3 V interface IC. The high-bandwidth, low and flat on-state-resistance characteristics make the device appropriate for baseband video routing where consistent signal attenuation is important. Place the switch near the video connector or processor input, route ground as a continuous reference, and verify the complete signal path for crosstalk and reflections. The designer should also confirm the manufacturer timing and isolation limits against the inspection system’s line rate and switching requirements.

🖥️

Test and Measurement Signal Selection

The TS3V340D can provide multiple signal-selection paths in test and measurement equipment that alternates between an operating signal and a reference or diagnostic source. Four 2:1 SPDT functions support compact routing arrangements around video test points, while the 3.3 V supply aligns with modern mixed-signal test platforms. Low and flat on-state resistance helps maintain a consistent signal level across switch states, although the final bandwidth and insertion-loss budget must be verified from the manufacturer datasheet. Locate the device near the measurement entry point, keep switch traces short, and avoid sharing sensitive video returns with unrelated high-current paths.

📺

Presentation and Display Input Routing

Presentation systems, conference-room displays, and digital signage controllers can use the TS3V340D to select among primary and backup video inputs. The four-channel architecture provides several routing points without requiring four separate single-channel switch packages. Its low and flat on-state resistance is useful for maintaining predictable video levels, while the 16-pin SOIC package supports conventional surface-mount assembly. Place each switched net close to the destination connector or downstream receiver, maintain a low-impedance ground plane, and keep unused inputs configured as required by the manufacturer. Board-level validation should include source transitions, cable loading, and compatibility with the downstream video receiver.

🎥

Video Observation and Surveillance Routing

The TS3V340D is suitable for surveillance and observation equipment that must select between live camera outputs, recorded-video paths, or diagnostic signals. Four 2:1 SPDT channels can provide distributed routing in a compact 3.3 V design, helping reduce the component count compared with multiple discrete switches. The high-bandwidth video-switch positioning and flat on-state resistance support consistent signal transfer, but actual channel isolation and insertion loss must be checked against the camera format and cable length. Keep sensitive analog paths away from switching power nodes, use a continuous ground reference, and place decoupling close to the device according to the manufacturer recommendations.

🎥

Broadcast and Studio Video Patch Routing

Compact broadcast, studio, and production-monitoring systems can use the TS3V340D to route video feeds between primary and alternate paths. Its four independent SPDT channels support multiple selections within one package, while the 3.3 V operating voltage suits modern digital video infrastructure. The low and flat on-state-resistance characteristic helps reduce state-dependent level changes in baseband video routes. For professional installations, engineers should still validate bandwidth, isolation, insertion loss, and switching behavior against the actual video standard and cable network. The PCB should use short high-speed routing, a solid ground reference, and controlled return paths to preserve signal integrity.

What is the Texas Instruments TS3V340D?
The Texas Instruments TS3V340D is a 3.3 V analog video switch containing four independent 2:1 SPDT channels in a 16-pin SOIC package. According to the manufacturer product page, the TS3V340 family provides high-bandwidth video switching with low and flat on-state resistance. It is intended for routing one of two signals into each common video path without using four separate discrete switch packages.
How many video channels does the TS3V340D provide?
The TS3V340D provides four video channels, and every channel has a 2:1 SPDT configuration. The manufacturer describes the device as a four-channel video switch, allowing one common signal path in each channel to be routed to either of two selectable inputs. This makes the device suitable for multi-source selection and primary-to-backup video-routing arrangements.
What package does the TS3V340D use?
The TS3V340D uses a 16-pin SOIC package. The Texas Instruments ordering information identifies the TS3V340D as the D-package option for the TS3V340 family, while distributor listings describe it as a 16-SOIC video switch. Use the manufacturer pin-description table and package drawing for the authoritative footprint and terminal assignments.
What is the operating temperature range of TS3V340D?
The TS3V340D is specified for an operating temperature range of -40 °C to +85 °C. This range appears in the product listing data for the device. When applying the component in industrial equipment, verify the complete system temperature, the recommended PCB layout, and all electrical limits against the manufacturer datasheet before releasing the design.
Why does the TS3V340D have a flat on-state resistance?
The TS3V340D uses a low and flat on-state resistance to reduce attenuation variation as its switch state changes. For high-speed video paths, resistance consistency helps limit level-dependent insertion loss and signal distortion. The exact resistance value, test voltage, and frequency conditions are not stated on the product page and should be taken from the manufacturer datasheet.
Where can I download the TS3V340D datasheet PDF?
The TS3V340D datasheet is available through the Texas Instruments TS3V340 product page at https://www.ti.com/product/TS3V340. Open the datasheet link on that page to obtain the authoritative PDF containing the electrical characteristics, timing information, pin descriptions, and application details. A direct manufacturer PDF URL is not listed in the available product references.
Where can I find the TS3V340D pinout?
The TS3V340D pinout is found in the pin-configuration section of the Texas Instruments manufacturer datasheet for the TS3V340 family. The component has 16 terminals in the SOIC package, but the complete terminal names cannot be reproduced reliably without that pin-description table. Use the datasheet table when assigning PCB nets and preserving no-connect conditions.
Can the TS3V340D switch between two video sources per channel?
Yes, the TS3V340D can select between two sources in each 2:1 SPDT channel. Its four common paths can each connect to one of two selectable inputs, making it useful for source selection, isolation, or test-point routing. Control sequencing and the valid state of each control input must follow the manufacturer datasheet.
When should I choose the TS3V340D for a video-routing design?
Choose the TS3V340D when a design needs four independent SPDT routes operating from a 3.3 V supply and benefit from a compact 16-pin SOIC implementation. It is especially relevant to high-bandwidth baseband video paths that require low and flat on-state resistance. A different switch family may be preferable if the signal type, supply voltage, bandwidth, or control interface differs.
What is the best drop-in replacement for the TS3V340D?
No verified drop-in replacement can be recommended for the TS3V340D from the available manufacturer and cross-reference information. A valid replacement must match the 16-pin SOIC footprint, pin assignments, 3.3 V supply, control logic, four-channel SPDT topology, bandwidth, and on-state resistance. Generic cross-reference search pages do not establish those conditions, so they are not treated as verified substitutes.
Is TS3V340D the same as a generic four-channel SPDT video switch?
The TS3V340D is not automatically interchangeable with a generic four-channel SPDT switch. Although the topology may appear similar, functional equivalence requires matching pin assignments, logic levels, supply voltage, bandwidth, resistance, isolation, and switching timing. Compare the proposed part against the complete Texas Instruments datasheet rather than relying only on the number of channels.
Where can I buy the TS3V340D online?
Use the Request a Quote form on this page to request the TS3V340D, current availability, order quantity, and lead time from XAIPART. The product is identified as a Texas Instruments 3.3 V, four-channel, 2:1 SPDT video switch in the 16-pin SOIC package. A current firm quotation should be used for purchasing decisions because market conditions and component availability change.
What is the price of the TS3V340D?
The current TS3V340D quotation is available through the Request a Quote form on this page. Pricing can depend on order quantity, sourcing condition, and market movement, so engineers should request the quantity and delivery schedule they need. The page does not publish a static unit-price figure that should be treated as a permanent quotation.
What is the lead time for TS3V340D availability?
The current TS3V340D lead time should be requested through the Request a Quote form on this page. Submit the required quantity, target delivery date, and permitted assembly condition to receive a current commitment. A lead time should not be inferred from the presence of catalog listings because inventory levels vary by region and order volume.
Is the TS3V340D currently in stock?
Current TS3V340D stock status should be confirmed through the Request a Quote form on this page. The manufacturer product page establishes device availability and ordering information, but it does not establish a live XAIPART inventory quantity. Include your required quantity and production schedule so the quotation can reflect the appropriate supply condition.

داده‌های مرجع مهندسی برای TS3V340D — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the TS3V340D when the design requires four independent 2:1 SPDT routing paths, a 3.3 V supply, and a 16-pin SOIC footprint for baseband video applications. Its low and flat on-state resistance is valuable when source changes should produce predictable signal levels. Consider a different device when the required video bandwidth exceeds the TS3V340D limits, the logic interface differs, or the routing topology requires more than two inputs per channel. Do not select a generic SPDT switch solely by channel count; verify pin assignments, control levels, isolation, insertion loss, and timing. For an existing PCB, a valid drop-in replacement must reproduce the full 16-pin interface and all critical electrical characteristics. Because no verified substitute meeting those conditions was identified, existing TS3V340D boards should be reviewed directly against the manufacturer datasheet before changing suppliers.

مقایسه با جایگزین‌ها

پارامتر این محصول
Brand Texas Instruments
Package 16-pin SOIC
Supply Voltage 3.3 V
Number of Channels 4 channels
Switch Configuration 2:1 SPDT per channel
On-State Resistance Low and flat
Signal Bandwidth High bandwidth
Operating Temperature Range -40 °C to +85 °C

تفاوت‌های کلیدی

  • Four independent SPDT routes in one package (در مقابلGeneric single-channel SPDT switch)
  • Designed for high-bandwidth baseband video routing (در مقابلGeneral-purpose low-speed analog switch)
  • Low and flat on-state resistance (در مقابلSwitch with resistance variation across states)

یادداشت‌های طراحی

Place the TS3V340D close to the video connector, source-selection point, or downstream receiver receiving the routed signals. Keep switched traces short and avoid adding test pads or stubs on sensitive video nets unless their effects have been evaluated. Route a continuous ground reference directly beneath the signal path and return connector grounds to the board ground plane rather than through the switch traces.

Use the manufacturer pin-description table to assign every terminal and preserve specified no-connect conditions. Control signals must be compatible with the device’s 3.3 V logic environment. For high-speed video routes, verify insertion loss, return loss, channel isolation, and crosstalk in the assembled board because package parasitics, connector geometry, and ground discontinuities can affect performance beyond the device specifications.

Do not treat a generic four-channel SPDT switch as a drop-in substitute without checking its pinout and electrical limits. Confirm supply voltage, control thresholds, bandwidth, on-state resistance, insertion loss, isolation, and switching timing against the TS3V340D requirements. Also validate unused-input states and control sequencing in hardware because incorrect static conditions can create unintended signal paths or excess current.

Keep the switched video paths separated from switching-regulator power nodes, high-speed clocks, and other noisy nets. Provide local supply bypassing and a low-impedance ground connection close to the IC. When the board includes both analog video and digital control circuitry, establish return-current paths so switching and control currents do not share the sensitive video reference segments.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

Compliance status must be confirmed from the manufacturer product documentation and current declarations.

تاریخ تأیید داده‌ها: 2026-11-10 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

TS3V340D datasheet TS3V340D pinout TS3V340D datasheet pdf TS3V340D specifications Texas Instruments TS3V340D TS3V340D 16-SOIC TS3V340D video switch TS3V340D 3.3V SPDT TS3V340D replacement TS3V340D equivalent TS3V340D application circuit TS3V340D buy

قطعات و اصطلاحات مرتبط

Texas Instruments TS3V340D TS3V340 analog video switch video switch IC SPDT switch 2:1 multiplexer interface IC semiconductor 3.3 V low on-state resistance flat on-state resistance high-bandwidth video 16-pin SOIC SOIC family surface mount SMD package baseband video signal routing source selection video switching signal integrity channel isolation insertion loss RoHS REACH AEC-Q100
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ