Texas Instruments

TUSB1310AZAY - 5 Gbps USB 3.0 Transceiver | Texas Instruments

MPN: TUSB1310AZAY ✓ 啟用中
175-NFBGA, 12 x 12 mm Package 20, 25, 30, and 40 MHz Speed
MOQ: 1 |

TUSB1310AZAY 概覽

Texas Instruments TUSB1310AZAY is a single-port SuperSpeed USB 3.0 physical-layer transceiver with a 5.0 Gbps data rate, PIPE and ULPI interfaces, and a 175-NFBGA package measuring 12 x 12 mm. It operates from one selectable reference clock at 20, 25, 30, or 40 MHz and can provide that clock to a USB controller.

A USB 3.0 transceiver is an interface IC that connects a USB controller or host to a SuperSpeed data link. It forms part of the hierarchy USB interface device, transceiver, interface IC, and semiconductor. Unlike a passive connector, the transceiver converts parallel controller data into high-speed differential signaling and receives differential signal information for the controller. The TUSB1310A also supports PIPE and ULPI interfaces, allowing it to connect with controllers that use either interface style.

Principal features include one USB 3.0 port, a 5.0 Gbps maximum data rate, four selectable reference-clock frequencies, and integrated USB power-state handling. The USB 3.0 power states named in the manufacturer documentation are U0, U1, U2, and U3. The PIPE specification defines P0, P1, P2, and P3, while the POWER_DOWN pin is mapped to LTSSM states as described in the manufacturer datasheet.

The device operates from a single reference clock supplied by either a crystal or an external clock source. The manufacturer describes the 20, 25, 30, and 40 MHz selection as enabling a cost-effective USB 3.0 implementation with few external components. Because the transceiver can provide the reference clock to the USB controller, the design can reduce the number of independent clock sources required on the board.

Typical uses include USB 3.0 host-controller systems, USB device controllers, external data-transfer equipment, test and measurement products, and embedded computing platforms that require a SuperSpeed interface. The PIPE and ULPI choices are particularly useful when a system already has a controller designed around one of those interfaces. The 175-NFBGA package also supports compact layouts where the electrical and thermal design can be controlled carefully.

When implementing the TUSB1310AZAY, follow the manufacturer datasheet for high-speed differential routing, reference-clock configuration, supply decoupling, ball assignment, and test-point access. Its 12 x 12 mm BGA footprint requires careful escape routing and multilayer PCB planning. Confirm that the selected controller supports the intended PIPE or ULPI mode and verify the complete USB link-training sequence during hardware validation.

This page consolidates the exact ordering information, interface capabilities, clock choices, package details, replacement information, and engineering design considerations for engineers evaluating a USB 3.0 SuperSpeed physical-layer implementation.

直接替換替代品,適用於 TUSB1310AZAY — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: TUSB1310AZAY (相同外形與佔位) — 差異在於 Clock Source, Product Type.

Texas Instruments
Clock Source: Single crystal or external reference clock
Product Type: USB 3.0 SuperSpeed physical-layer transceiver
比較對象 TUSB1310AZAY →

TUSB1310ZAY

✅ 直接替換
Texas Instruments
📦 175-NFBGA (12x12)
USB 3.0 SuperSpeed physical-layer transceiver · 1 transceiver port · 5.0 Gbps · USB 3.0 · PIPE3 and ULPI · Single crystal or external reference clock · 20, 25, 30, and 40 MHz · Supported

聯絡詢價

查看資料表 →

TUSB1310AZAY 規格

Product Type Single-port SuperSpeed USB 3.0 physical-layer transceiver
USB Generation USB 3.0
Maximum Data Rate 5.0 Gbps
Port Count 1 port
Controller Interface Options PIPE and ULPI
Reference Clock Frequencies 20, 25, 30, and 40 MHz
Clock Source Crystal or external reference clock
Reference Clock Output Provided to the USB controller
USB Power States U0, U1, U2, and U3
PIPE Power States P0, P1, P2, and P3
POWER_DOWN Function Mapped to LTSSM states
工作溫度範圍 -40 °C to +85 °C
封裝 175-NFBGA, 12 x 12 mm
安裝類型 Surface mount

TUSB1310AZAY 175-nfbga, 12 x 12 mm 腳位配置指南

TUSB1310AZAY(175-nfbga, 12 x 12 mm 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

TUSB1310AZAY 的 175-nfbga, 12 x 12 mm 封裝腳位圖

無詳細腳位定義資料: TUSB1310AZAY.

請參閱 資料表 以查看完整腳位配置。

典型應用

TUSB1310AZAY 適用於 6 應用s: USB 3.0 Host Controller Systems, External Data Transfer Equipment, Industrial USB Data Acquisition, USB Test and Measurement Equipment, Embedded Computing Platforms, Network Adapter and Bridge Products.

🖥️

USB 3.0 Host Controller Systems

The TUSB1310AZAY fits a USB 3.0 host-controller design requiring a 5.0 Gbps SuperSpeed physical layer with PIPE or ULPI connectivity. It uses one 20, 25, 30, or 40 MHz reference clock and can provide that clock to the controller, reducing the need for separate clock sources. In this topology, the transceiver sits between the host controller and the external SuperSpeed connection, while the USB controller manages protocol traffic and LTSSM operation. The design advantage is a compact 175-NFBGA, 12 x 12 mm implementation with a manufacturer-described low external-component count. Board designers should still reserve short differential routes, clean reference-clock connections, and suitable power decoupling according to the manufacturer layout guidance.

🖥️

External Data Transfer Equipment

The TUSB1310AZAY is appropriate for external storage, docking, and data-transfer products that need a 5.0 Gbps USB 3.0 connection. The single-port transceiver accepts either PIPE or ULPI signaling from the controller, allowing firmware and board architecture to remain compatible with more than one controller interface. A shared reference clock at 20, 25, 30, or 40 MHz simplifies the physical implementation and can lower the number of oscillators required around the controller. For a compact enclosure, the 12 x 12 mm 175-NFBGA package is useful, but its dense ball pattern requires multilayer routing and careful assembly-process control. Signal-integrity validation should include compliance margin, hot-plug behavior, and link-training performance.

🏭

Industrial USB Data Acquisition

The TUSB1310AZAY can serve as the SuperSpeed interface in industrial data-acquisition equipment that transfers measurement data to a host at rates up to 5.0 Gbps. Its selectable reference-clock frequencies of 20, 25, 30, or 40 MHz allow the physical layer to align with the selected controller and clock architecture. The PIPE interface supports controller arrangements built around that protocol, while ULPI provides an alternative for compatible USB controllers. Using one reference clock for the transceiver and controller may reduce board area and clock-distribution complexity. In an industrial environment, enclosure temperature, power-supply integrity, and connector launch geometry remain important system-level constraints. Prototype testing should confirm recovery behavior, clock jitter tolerance, and sustained-transfer stability.

🔧

USB Test and Measurement Equipment

The TUSB1310AZAY is suitable for USB-based test and measurement instruments that need a fast, deterministic host connection for transferring waveforms, configuration data, or captured samples. The 5.0 Gbps SuperSpeed capability reduces transfer time compared with lower-speed USB links, while PIPE and ULPI support gives designers two controller-interface options. The selectable 20, 25, 30, or 40 MHz reference clock can be shared with the controller to simplify synchronization. For instruments with sensitive internal analog sections, the physical-layer device should be kept away from sensitive routes, and clock and supply references must follow the manufacturer layout guidance. Bring-up should exercise repeated enumeration, suspend and resume, error recovery, and sustained transfers to verify link stability.

🧩

Embedded Computing Platforms

The TUSB1310AZAY supports embedded computing platforms that expose a SuperSpeed USB port to an external display, storage device, dock, or network adapter. A 5.0 Gbps physical layer provides the link bandwidth expected from USB 3.0 while offering both PIPE and ULPI controller choices. Because the transceiver can operate from one crystal or external clock and supply the controller reference, a platform designer can consolidate clock resources and reduce board complexity. The 175-NFBGA package helps achieve a compact result, although multilayer escape routing and assembly inspection must be planned from the outset. Firmware should validate link-speed negotiation and fall back to lower USB speeds when cable or connector conditions prevent reliable SuperSpeed operation.

🌐

Network Adapter and Bridge Products

The TUSB1310AZAY can be used in a USB-to-network adapter or protocol-bridge product where an external USB 3.0 host connects to an embedded processing subsystem. The physical-layer transceiver operates at up to 5.0 Gbps and communicates with the local controller through PIPE or ULPI, while the controller manages USB protocol behavior and the bridge function. Its selectable clock options of 20, 25, 30, or 40 MHz support flexible platform clock plans, and the shared reference-clock capability can reduce oscillator count. The dense 175-NFBGA package requires a multilayer PCB with careful length matching and reference-plane continuity. Production validation should include enumeration across host operating systems, thermal testing at sustained data rates, and recovery tests after cable disturbance.

What is the TUSB1310AZAY?
The TUSB1310AZAY is a single-port, 5.0 Gbps SuperSpeed USB 3.0 physical-layer transceiver from Texas Instruments. According to the manufacturer product page, it supports PIPE and ULPI controller interfaces and operates from one selectable 20, 25, 30, or 40 MHz reference clock. The device is supplied in a 175-NFBGA package measuring 12 x 12 mm.
What USB data rate does TUSB1310AZAY support?
The TUSB1310AZAY supports a maximum SuperSpeed data rate of 5.0 Gbps. The Texas Instruments TUSB1310A product page identifies the device as a single-port USB 3.0 physical-layer transceiver with PIPE and ULPI interfaces. This rate describes the USB 3.0 SuperSpeed link implemented by the transceiver rather than the rate of the parallel controller interface.
Which controller interfaces can use TUSB1310AZAY?
The TUSB1310AZAY can operate with either a PIPE or ULPI controller interface. According to the Texas Instruments product page, both interface options are provided by this SuperSpeed USB 3.0 transceiver. The USB 3.0 specification defines the U0, U1, U2, and U3 power states, while the PIPE interface uses the P0, P1, P2, and P3 state naming described in the manufacturer documentation.
What reference clock frequencies does TUSB1310AZAY support?
The TUSB1310AZAY supports selectable reference clocks of 20, 25, 30, and 40 MHz. According to the Texas Instruments TUSB1310A documentation, the clock may come from a crystal or an external reference source. The transceiver can provide the selected clock to the USB controller, helping reduce the number of separate clock sources required in the system.
Where can I download the TUSB1310AZAY datasheet PDF?
The official TUSB1310A datasheet and product-support material are available through the Texas Instruments TUSB1310A product page and its linked datasheet document. The manufacturer page describes the 5.0 Gbps SuperSpeed USB 3.0 transceiver, selectable clock frequencies, PIPE and ULPI interfaces, USB power states, and POWER_DOWN mapping. Use the pin-description table in that datasheet when assigning the 175-NFBGA balls.
Where is the TUSB1310AZAY pinout located?
The TUSB1310AZAY pinout is located in the pin-description table and package drawing in the Texas Instruments TUSB1310A manufacturer datasheet. The component uses a 175-NFBGA package measuring 12 x 12 mm, so a simple two- or three-pin diagram would not represent its complete land pattern. Use the complete 175-ball assignment and recommended footprint shown by the manufacturer.
What is the best drop-in replacement for TUSB1310AZAY?
TUSB1310ZAY is the documented pin-compatible drop-in alternative to the TUSB1310AZAY. The cross-reference information identifies the two devices as functionally equivalent and pin-compatible, with no significant electrical or timing differences. Firmware handshaking and link-training behavior should still be checked under marginal signal conditions, but the two parts use the same 175-NFBGA package and function.
Can TUSB1310ZAY replace TUSB1310AZAY on an existing PCB?
Yes, TUSB1310ZAY can replace TUSB1310AZAY on an existing PCB because the documented comparison identifies them as functionally equivalent and pin-compatible. Both devices use the 175-NFBGA package, and the source describes no significant electrical or timing differences. Validate firmware handshaking and link training after substitution, especially when signal integrity margins are limited.
What can replace TUSB1310AZAY?
TUSB1310ZAY is the supported drop-in choice for replacing the TUSB1310AZAY. It is listed as functionally equivalent and pin-compatible, with no significant electrical or timing differences, and both parts use the same 175-NFBGA package. No other cross-manufacturer substitute was established with sufficient package and pinout evidence, so PCB-specific alternatives should not be treated as drop-in replacements.
Is TUSB1310AZAY the same as TUSB1310ZAY?
The TUSB1310AZAY and TUSB1310ZAY are functionally equivalent and pin-compatible according to the published comparison. The reported electrical and timing differences are not significant, and both are USB 3.0 transceivers in the 175-NFBGA package. The substitution is suitable for existing designs, although link-training and firmware handshaking should be reconfirmed after implementation.
TUSB1310AZAY vs TUSB1310ZAY, which is better for a new design?
The TUSB1310AZAY and TUSB1310ZAY have equivalent USB 3.0 transceiver functionality, electrical timing, package, and pin compatibility. Neither has a documented performance advantage over the other in the available comparison. Choose according to availability and the exact ordering suffix, then verify the selected part's ball map, clock configuration, and controller interface in the manufacturer documentation.
When should I choose TUSB1310AZAY over an alternative?
Choose the TUSB1310AZAY when the design requires a 5.0 Gbps single-port USB 3.0 transceiver with PIPE and ULPI support and a 175-NFBGA, 12 x 12 mm package. It is suitable when a single 20, 25, 30, or 40 MHz reference clock can serve both the transceiver and USB controller. TUSB1310ZAY is the practical alternative when the same pin-compatible implementation is needed.
Is TUSB1310AZAY suitable for USB host-controller and embedded systems?
Yes, the TUSB1310AZAY is suitable for systems requiring a USB 3.0 SuperSpeed physical layer at up to 5.0 Gbps. Its PIPE and ULPI interfaces support controller integration, while the selectable reference clock can be shared with the controller. It can support host-controller, embedded-computing, external-storage, and data-acquisition designs whose USB controller uses one of the supported interfaces.
Where can I buy TUSB1310AZAY and check its lead time?
Use the Request a Quote form on this page to request TUSB1310AZAY pricing, stock confirmation, and current lead time. The part is a catalog USB 3.0 transceiver with a 175-NFBGA package, but current commercial availability should be confirmed for the exact suffix and required quantity. Packaging, reel quantity, and delivery timing should be specified with the request.
How should the TUSB1310AZAY reference clock be implemented?
The TUSB1310AZAY should use either a crystal or an external reference clock operating at one supported frequency: 20, 25, 30, or 40 MHz. According to the Texas Instruments documentation, the device can provide the reference clock to the USB controller, reducing the implementation's external-component count. Follow the manufacturer reference design for clock components, layout, and supported drive arrangements.

工程參考資料,適用於 TUSB1310AZAY — 比較、設計指引及合規資訊。

選型指南

Select the TUSB1310AZAY for a new design that needs a single-port, 5.0 Gbps USB 3.0 physical layer with PIPE or ULPI controller connectivity and a 175-NFBGA, 12 x 12 mm package. Its selectable 20, 25, 30, and 40 MHz reference clock and ability to provide the clock to the controller simplify synchronization around the USB subsystem. Choose TUSB1310ZAY when it offers better commercial availability or when preserving an existing TUSB1310AZAY-based PCB is the priority: the two are documented as functionally equivalent and pin-compatible, with no significant electrical or timing differences. No cross-manufacturer alternative was established with sufficient evidence of identical ball mapping, electrical characteristics, and controller handshaking. Do not choose a generic USB 3.0 transceiver based only on its 5 Gbps headline rate. Confirm supply requirements, interface mode, clock configuration, package footprint, layout guidance, and link-training behavior in the manufacturer documentation before releasing production hardware.

與替代品比較

參數 本產品 TUSB1310ZAY
Brand Texas Instruments Texas Instruments
Package 175-NFBGA (12x12) 175-NFBGA (12x12), pin-compatible
Product Type Single-port USB 3.0 physical-layer transceiver Single-port USB 3.0 physical-layer transceiver
Maximum Data Rate 5.0 Gbps 5.0 Gbps
Controller Interfaces PIPE and ULPI PIPE and ULPI
Reference Clock Frequencies 20, 25, 30, and 40 MHz 20, 25, 30, and 40 MHz
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C
Electrical and Timing Difference Reference configuration No significant difference reported

主要差異化特點

  • Documented pin-compatible replacement path (對比TUSB1310ZAY)
  • Flexible controller-interface selection (對比TUSB1310ZAY)
  • Shared reference-clock architecture (對比TUSB1310ZAY)

設計說明

Plan the 175-NFBGA layout as a multilayer high-speed design rather than treating it as a conventional perimeter package. Escape the SuperSpeed differential pairs directly from the transceiver to the connector or next stage with the shortest practical path, preserve continuous reference planes, and follow the manufacturer's recommended ball pattern and layer stack. Confirm assembly capability for the dense 12 x 12 mm land pattern before releasing the board.

Validate the reference clock and high-speed links with the actual controller, PCB, connector, and cable configuration. The transceiver supports 20, 25, 30, and 40 MHz reference-clock frequencies, so configuration errors can affect the entire USB link. Check differential impedance, return loss, insertion loss, clock jitter, and margin across SuperSpeed operation, then repeat tests during repeated enumeration and suspend-resume cycles.

Follow the manufacturer power-supply and decoupling recommendations before calculating additional board-level power headroom. The USB power states U0, U1, U2, and U3 and the mapped POWER_DOWN behavior make low-power transitions part of normal operation. Place recommended capacitors close to their designated supply balls, keep supply and return paths short, and verify startup and shutdown behavior with the selected reference-clock configuration.

Do not substitute a USB controller interface without confirming the PIPE or ULPI mode supported by the TUSB1310AZAY and the chosen controller. Also avoid treating a different USB transceiver as a drop-in part merely because it supports USB 3.0: footprint, ball functions, voltage requirements, clocking, and controller handshaking must all match. Use the complete manufacturer ball map and interface timing documentation during schematic and PCB review.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The manufacturer product page and datasheet links were identified, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was established for this exact ordering suffix. Check the current manufacturer product and quality documentation before making a compliance claim.

資料驗證日期: 2026-11-16 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

TUSB1310AZAY datasheet TUSB1310AZAY pinout TUSB1310AZAY datasheet pdf TUSB1310AZAY equivalent TUSB1310AZAY replacement TUSB1310AZAY cross reference TUSB1310AZAY vs TUSB1310ZAY TUSB1310AZAY 175 NFBGA footprint TUSB1310AZAY 5 Gbps USB 3.0 TUSB1310AZAY PIPE ULPI TUSB1310AZAY reference clock Texas Instruments TUSB1310AZAY TUSB1310AZAY price TUSB1310AZAY stock

相關元件與詞彙

Texas Instruments TUSB1310AZAY TUSB1310A TUSB1310ZAY USB 3.0 SuperSpeed USB physical-layer transceiver USB interface IC PIPE interface ULPI interface 5.0 Gbps 175-NFBGA 12 x 12 mm package reference clock 20 MHz 25 MHz 30 MHz 40 MHz USB power states U0 U1 U2 U3 LTSSM USB host controller
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情