Texas Instruments

TUSB544RNQT - 8.1-Gbps 4-Channel USB-C Redriver | Texas Instruments

MPN: TUSB544RNQT ✓ 啟用中
3.3 V Vdss 40-pin WQFN (RNQ) Package
MOQ: 1 |

TUSB544RNQT 概覽

Texas Instruments TUSB544RNQT is a USB Type-C multi-protocol linear redriver with four channels, a maximum data rate of 8.1 Gbps, and a 40-pin WQFN (RNQ) package. It supports USB Type-C applications that include DisplayPort Alt Mode and other protocol-agnostic high-speed links, helping recover signal integrity after losses introduced by connectors, cables, and PCB traces.

A linear redriver is a signal-conditioning semiconductor that receives a high-speed differential signal, applies selectable receive equalization, and resends the signal through an output driver. The TUSB544RNQT sits between a transmitter and a lossy interconnect rather than changing the underlying protocol or endpoint logic. Its protocol-agnostic architecture allows it to support multiple link types while operating from a single 3.3 V supply.

The device provides four redriver channels, input equalization, output de-emphasis, a maximum data rate of 8.1 Gbps, and a stated propagation delay of 10.0 ns. These features make it useful for improving eye opening and reducing intersymbol interference on links affected by channel loss. The manufacturer classifies the device as an active, four-channel buffer and redriver intended for USB Type-C input and output signal paths.

As a linear redriver, the TUSB544RNQT preserves the incoming data stream rather than converting it into another protocol. Its receive-side equalization compensates for low-frequency and high-frequency attenuation, while output de-emphasis can improve the transmitted signal shape. Signal-integrity tuning requires coordinated control of the host or peripheral source, cable and connector losses, trace geometry, and the redriver settings rather than treating equalization as a universal fix.

Typical uses include USB-C docking systems, DisplayPort Alt Mode links, laptop and tablet accessories, high-speed external storage, and multi-protocol Type-C equipment. The four-channel arrangement can support a compact implementation that conditions multiple high-speed lanes, while the 6 mm by 4 mm WQFN package helps limit board area in space-constrained designs.

Place the TUSB544RNQT close to the connector or the electrically weaker side of the link, and keep high-speed differential traces short and impedance controlled. Decoupling, return-path continuity, ESD protection, and thermal performance require careful PCB planning. Configuration resistors and test points should follow the manufacturer layout guidance because incorrect equalization or de-emphasis can reduce usable eye height.

This product page combines the exact ordering information, 8.1-Gbps four-channel capability, 10.0 ns delay, 3.3 V operation, WQFN-40 physical details, application guidance, and verified sourcing links for engineers evaluating a USB Type-C redriver design.

直接替換替代品,適用於 TUSB544RNQT — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此產品無可直接替換的替代品。

申請替代品

TUSB544RNQT 規格

Product Type USB Type-C multi-protocol linear redriver
Maximum Data Rate 8.1 Gbps
Number of Channels 4 channels
供應電壓 3.3 V
Propagation Delay 10.0 ns
封裝 40-pin WQFN (RNQ)
Package Dimensions 6 mm x 4 mm
安裝類型 Surface mount
Signal Conditioning Input equalization and output de-emphasis
Supported Protocol USB Type-C multi-protocol
DisplayPort Support VESA DisplayPort Alt Mode
工作溫度範圍 -40 C to +85 C
生命週期狀態 Active
Packaging Type Tape and reel

TUSB544RNQT 6 mm x 4 mm 腳位配置指南

TUSB544RNQT(6 mm x 4 mm 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

TUSB544RNQT 的 6 mm x 4 mm 封裝腳位圖

無詳細腳位定義資料: TUSB544RNQT.

請參閱 資料表 以查看完整腳位配置。

典型應用

TUSB544RNQT 適用於 6 應用s: USB-C Docking Stations, DisplayPort Alt Mode Systems, Laptop and Tablet Accessories, High-Speed External Storage, Multi-Protocol Type-C Equipment, High-Speed Test and Measurement Instruments.

🖥️

USB-C Docking Stations

The TUSB544RNQT fits docking stations where USB-C connector launches, internal cables, and PCB routing can reduce the margin of high-speed lanes. Its four-channel architecture conditions multiple links up to 8.1 Gbps, while receive equalization and output de-emphasis help compensate for the losses encountered between a source and peripheral. Position the redriver near the connector or the more heavily impaired channel section, then tune the settings against the eye measured with the intended dock, cables, and peripheral. The 3.3 V single-supply operation simplifies rail planning, although each lane still requires continuous reference-plane transitions and careful return-path routing.

📺

DisplayPort Alt Mode Systems

The TUSB544RNQT is suitable for USB Type-C DisplayPort Alt Mode links that operate over long connectors, internal cable assemblies, or multilayer PCB routes. Its 8.1-Gbps capability supports the high-speed lanes used by compatible DisplayPort configurations, and its linear signal path preserves the source-to-sink data stream without changing DisplayPort protocol handling. Input equalization can counter attenuation, while output de-emphasis can improve the shape of the redriven differential signal. Because each physical link has a unique loss profile, engineers should evaluate lane-by-lane eye margin and test multiple cable lengths rather than applying one universal compensation setting.

📱

Laptop and Tablet Accessories

Compact USB-C accessories can use the TUSB544RNQT to recover high-speed signal integrity across connector and cable losses. The device's four channels support several compatible lanes within one 40-pin WQFN package, while its 3.3 V supply and maximum 8.1-Gbps operation suit modern Type-C equipment. In a space-constrained design, short differential traces, uninterrupted ground planes, and low-inductance decoupling are essential. Use the redriver where it can most effectively compensate the lossy section, and verify operation across the required cable length, host or sink family, and environmental temperature range. The linear architecture avoids adding protocol conversion to the accessory data path.

🖥️

High-Speed External Storage

The TUSB544RNQT can condition compatible high-speed lanes used by external storage accessories connected through USB Type-C. Storage systems often combine a connector, cable transition, protection components, and several PCB layers, creating insertion loss that may reduce the available eye. Four-channel redrive capability allows multiple lanes to be conditioned when the link architecture requires it. Input equalization addresses attenuation before the signal is retransmitted, and output de-emphasis provides an additional source-side control. Validate the complete link because file-transfer performance depends on stable eye margin at the receiver, not only successful enumeration. Maintain symmetric high-speed routing and preserve continuous ground references beneath every differential pair.

🧩

Multi-Protocol Type-C Equipment

The protocol-agnostic architecture of the TUSB544RNQT makes it appropriate for multi-protocol Type-C equipment that must support more than one high-speed link mode. At data rates up to 8.1 Gbps, the four-channel device can provide consistent signal conditioning without implementing a separate redriver for every supported lane type. Its single 3.3 V operating supply simplifies the power architecture, while the 6 mm by 4 mm WQFN footprint supports compact boards. The source and sink still control protocol negotiation, and the system designer must confirm that each requested mode is electrically compatible with the redriver and channel-loss budget. Bench testing across each supported mode is essential.

🔧

High-Speed Test and Measurement Instruments

The TUSB544RNQT can be used in USB Type-C test equipment, analyzer fixtures, and measurement systems where channel loss threatens high-speed signal integrity. Its four channels and 8.1-Gbps maximum data rate allow the instrument or fixture to present a more reliable electrical interface to a device under test. Receive equalization and output de-emphasis can compensate for fixture launches, cable adapters, and long interconnects, improving the probability that measurements reflect device behavior rather than an impaired channel. Use controlled impedance routing and short fixture connections, and document each equalization setting so test results remain repeatable across cable and sample changes. The redriver conditions signals without taking ownership of the protocol.

What is the TUSB544RNQT?
The TUSB544RNQT is a four-channel USB Type-C multi-protocol linear redriver from Texas Instruments. According to the manufacturer product page, it supports data rates up to 8.1 Gbps, operates from a single 3.3 V supply, and applies receive equalization and output de-emphasis. It is packaged in a 40-pin WQFN (RNQ) package.
What does the Texas Instruments TUSB544RNQT do?
The TUSB544RNQT conditions high-speed differential signals by applying selectable input equalization and output de-emphasis before retransmitting them. According to Texas Instruments, the device is protocol-agnostic and supports USB Type-C Alt Mode interfaces, including VESA DisplayPort. This makes it suitable for links degraded by connector, cable, or PCB-trace loss.
How fast can TUSB544RNQT operate?
The TUSB544RNQT supports a maximum data rate of 8.1 Gbps. Texas Instruments describes it as an 8.1-Gbps USB Type-C multi-protocol linear redriver with four channels. Its 10.0 ns propagation delay identifies it as a signal-conditioning device intended for high-speed USB Type-C and compatible Alt Mode links.
What package and pin count does TUSB544RNQT use?
The TUSB544RNQT uses a 40-pin WQFN package identified by TI as RNQ. The manufacturer part-details listing specifies a 6 mm by 4 mm surface-mount package. Use the pin-description table and package drawing in the manufacturer datasheet when assigning connector, supply, ground, configuration, and test connections.
Where can I download the TUSB544RNQT datasheet?
The official TUSB544 product page is the primary document entry point for the TUSB544RNQT datasheet and support materials. According to Texas Instruments, the device is an 8.1-Gbps USB Type-C multi-protocol linear redriver. Open the product page's datasheet link to obtain the manufacturer PDF and use its pin, electrical, and application sections for design sign-off.
Where can I find the TUSB544RNQT pinout?
The TUSB544RNQT pinout is published in the manufacturer datasheet under the pin-configuration and package-information sections. The exact ordering code uses a 40-pin WQFN (RNQ) package. Assign PCB connections from the official pin table rather than inferring signals from package dimensions or neighboring connector assignments.
When should I choose the TUSB544RNQT for a USB-C design?
Choose the TUSB544RNQT when a USB Type-C high-speed link shows loss-related eye closure and the design requires four channels of linear equalization. Its 8.1-Gbps capability, input equalization, and output de-emphasis are useful for DisplayPort Alt Mode and other compatible links. It is less appropriate when signal integrity is already adequate or a protocol conversion function is required.
Is the TUSB544RNQT suitable for DisplayPort Alt Mode?
Yes, the TUSB544RNQT is suitable for USB Type-C DisplayPort Alt Mode signal conditioning. Texas Instruments identifies VESA DisplayPort among the supported Alt Mode interfaces and describes the redriver as protocol-agnostic. Its 8.1-Gbps maximum data rate and adjustable signal-conditioning functions can help recover high-speed lanes affected by interconnect loss.
What is the difference between a redriver and a repeater in a USB-C link?
The TUSB544RNQT is a linear redriver that compensates high-speed signal loss while preserving the transmitted data stream. A repeater may provide a more specialized regeneration function or operate within a defined protocol ecosystem, whereas this device applies receive equalization and output de-emphasis. The interface must remain suitable for transparent high-speed signal conditioning.
Does the TUSB544RNQT convert USB or DisplayPort protocols?
No, the TUSB544RNQT does not perform protocol conversion. It is a protocol-agnostic linear redriver that conditions compatible high-speed differential lanes. According to the manufacturer product page, it supports USB Type-C Alt Mode interfaces, including VESA DisplayPort, but endpoint control and link management remain the responsibility of the connected source and sink devices.
What is the best drop-in replacement for TUSB544RNQT?
No verified drop-in replacement can be identified from the available manufacturer and cross-reference information. TUSB544RNQR appears in comparison information, but it is an alternate orderable representation of the same device rather than a distinct drop-in alternative. For PCB substitution, require the same RNQ 40-pin footprint, pin functions, 3.3 V supply, 8.1-Gbps capability, equalization settings, and electrical limits.
Can TUSB544RNQR replace TUSB544RNQT?
TUSB544RNQR may represent another orderable configuration of the TUSB544 device, but it should not be treated as an engineering drop-in alternative solely from a cross-reference result. Verify its exact orderable status, reel configuration, and lot-related documentation with Texas Instruments. A true replacement must preserve the RNQ footprint, pinout, electrical behavior, and configuration interface.
What is the best TI equivalent for the TUSB544RNQT?
The closest Texas Instruments device identified by manufacturer naming is TUSB544RNQR, which shares the TUSB544 family name. However, it is not presented as a distinct substitute with independently verified electrical advantages. The safest approach is to use the TUSB544 family and confirm the exact suffix, mechanical drawing, ordering information, and qualification details before releasing a production order.
How should receive equalization and output de-emphasis be configured?
Configure the TUSB544RNQT by measuring the link eye and modeling the connector, cable, and PCB channel, then selecting the receive equalization and output de-emphasis combination that restores usable eye margin. The device provides input equalization and output de-emphasis, but settings must be matched to the actual channel. Validate the result with the intended source, sink, cable, and connector population.
Where can I buy TUSB544RNQT and request a current quote?
Use the Request a Quote form on this page to request the current TUSB544RNQT price, stock status, lead time, and order quantity. Texas Instruments identifies TUSB544RNQT as an active part in a 40-pin WQFN (RNQ) package. A quote request allows the order configuration and delivery requirements to be checked against current channel availability.

工程參考資料,適用於 TUSB544RNQT — 比較、設計指引及合規資訊。

選型指南

Choose the TUSB544RNQT for a four-lane USB Type-C or compatible Alt Mode link where connector, cable, or PCB loss causes inadequate eye margin and linear signal conditioning is appropriate. Its 8.1-Gbps capability, input equalization, output de-emphasis, and single 3.3 V supply make it a focused solution for high-speed redrive functions. Do not choose it when the requirement is protocol conversion, regeneration of a nontransparent link, or operation at a rate above its stated maximum. No distinct drop-in alternative is established here, so PCB replacement should not be based on family naming alone. Validate any proposed substitute against the exact RNQ 40-pin footprint, pin assignments, supply requirements, propagation delay, equalization interface, and AC electrical characteristics. If design flexibility allows adding a redriver, compare the channel-loss budget and test coverage rather than selecting solely by nominal data rate.

與替代品比較

參數 本產品
Product Type USB Type-C multi-protocol linear redriver
Manufacturer Texas Instruments
Package 40-pin WQFN (RNQ)
Maximum Data Rate 8.1 Gbps
Number of Channels 4 channels
Supply Voltage 3.3 V
Propagation Delay 10.0 ns
Signal Conditioning Input equalization and output de-emphasis
Operating Temperature Range -40 C to +85 C
Lifecycle Status Active

主要差異化特點

  • Four-channel high-speed signal conditioning (對比No verified drop-in alternative was identified)
  • Protocol-agnostic architecture (對比No verified drop-in alternative was identified)
  • Single 3.3 V operation (對比No verified drop-in alternative was identified)

設計說明

Place the TUSB544RNQT near the connector or the most lossy part of the high-speed channel so that equalization acts before additional degradation. Use controlled-impedance, length-matched differential routing and preserve a continuous ground reference beneath each pair. Compare eye diagrams at the receiver before and after redrive, and tune receive equalization and output de-emphasis for the actual cable and connector population.

Keep the 3.3 V supply and ground connections short, place local decoupling at the device pins, and avoid routing high-speed signals beneath unrelated noisy circuitry. The 40-pin WQFN package requires careful land-pattern and thermal-pad assembly design. Follow the manufacturer's package drawing for exposed-pad geometry, solder mask, and paste because hand-soldering a fine-pitch QFN footprint can create hidden electrical shorts.

Do not treat the TUSB544RNQT as a protocol converter or guarantee that equalization repairs every failed link. Its 8.1-Gbps rating does not guarantee that every cable, connector, and PCB route has sufficient margin. Confirm source and sink compatibility, verify the configured equalization and de-emphasis levels, test the longest supported cable, and inspect eye height and jitter rather than relying only on a successful link enumeration.

A redriver can radiate energy if its output settings create excessive edge activity or if supply and ground connections are noisy. Start with the manufacturer's recommended configuration, compare conducted and radiated behavior before and after installation, and ensure that the 3.3 V reference supply is quiet. Avoid abrupt impedance discontinuities and unnecessary stubs because reflections can increase emissions and reduce the margin gained from equalization.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The manufacturer information identifies the part as active and specifies a -40 C to +85 C operating range, but no explicit environmental or material-compliance declarations are available for extraction.

資料驗證日期: 2026-11-10 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

TUSB544RNQT datasheet TUSB544RNQT datasheet pdf TUSB544RNQT pinout TUSB544RNQT 40-WQFN TUSB544RNQT 8.1 Gbps TUSB544RNQT USB-C redriver TUSB544RNQT DisplayPort Alt Mode TUSB544RNQT equalization TUSB544RNQT drop-in replacement TUSB544RNQT price and stock

相關元件與詞彙

Texas Instruments TUSB544RNQT TUSB544 USB Type-C linear redriver signal buffer high-speed interface IC DisplayPort Alt Mode VESA DisplayPort 8.1 Gbps four-channel redriver input equalization output de-emphasis intersymbol interference 3.3 V supply 10.0 ns propagation delay WQFN-40 RNQ package surface-mount package USB-C docking station external storage accessory signal integrity eye margin differential pair TUSB551RWBR
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情