TUSB544RNQT - 8.1-Gbps 4-Channel USB-C Redriver | Texas Instruments
MPN: TUSB544RNQT ✓ نشطTUSB544RNQT نظرة عامة
A linear redriver is a signal-conditioning semiconductor that receives a high-speed differential signal, applies selectable receive equalization, and resends the signal through an output driver. The TUSB544RNQT sits between a transmitter and a lossy interconnect rather than changing the underlying protocol or endpoint logic. Its protocol-agnostic architecture allows it to support multiple link types while operating from a single 3.3 V supply.
The device provides four redriver channels, input equalization, output de-emphasis, a maximum data rate of 8.1 Gbps, and a stated propagation delay of 10.0 ns. These features make it useful for improving eye opening and reducing intersymbol interference on links affected by channel loss. The manufacturer classifies the device as an active, four-channel buffer and redriver intended for USB Type-C input and output signal paths.
As a linear redriver, the TUSB544RNQT preserves the incoming data stream rather than converting it into another protocol. Its receive-side equalization compensates for low-frequency and high-frequency attenuation, while output de-emphasis can improve the transmitted signal shape. Signal-integrity tuning requires coordinated control of the host or peripheral source, cable and connector losses, trace geometry, and the redriver settings rather than treating equalization as a universal fix.
Typical uses include USB-C docking systems, DisplayPort Alt Mode links, laptop and tablet accessories, high-speed external storage, and multi-protocol Type-C equipment. The four-channel arrangement can support a compact implementation that conditions multiple high-speed lanes, while the 6 mm by 4 mm WQFN package helps limit board area in space-constrained designs.
Place the TUSB544RNQT close to the connector or the electrically weaker side of the link, and keep high-speed differential traces short and impedance controlled. Decoupling, return-path continuity, ESD protection, and thermal performance require careful PCB planning. Configuration resistors and test points should follow the manufacturer layout guidance because incorrect equalization or de-emphasis can reduce usable eye height.
This product page combines the exact ordering information, 8.1-Gbps four-channel capability, 10.0 ns delay, 3.3 V operation, WQFN-40 physical details, application guidance, and verified sourcing links for engineers evaluating a USB Type-C redriver design.
بدائل مباشرة لـ TUSB544RNQT — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
لا تتوفر بدائل متوافقة تمامًا لهذا المنتج.
اطلب بدائلTUSB544RNQT المواصفات
| Product Type | USB Type-C multi-protocol linear redriver |
| Maximum Data Rate | 8.1 Gbps |
| Number of Channels | 4 channels |
| جهد التغذية | 3.3 V |
| Propagation Delay | 10.0 ns |
| العلبة | 40-pin WQFN (RNQ) |
| Package Dimensions | 6 mm x 4 mm |
| نوع التركيب | Surface mount |
| Signal Conditioning | Input equalization and output de-emphasis |
| Supported Protocol | USB Type-C multi-protocol |
| DisplayPort Support | VESA DisplayPort Alt Mode |
| نطاق درجة حرارة التشغيل | -40 C to +85 C |
| حالة دورة الحياة | Active |
| Packaging Type | Tape and reel |
دليل تكوين أطراف TUSB544RNQT 6 mm x 4 mm
تكوين الأطراف لـ TUSB544RNQT (حزمة 6 mm x 4 mm). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ TUSB544RNQT.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
TUSB544RNQT مناسب لـ 6 التطبيقs: USB-C Docking Stations, DisplayPort Alt Mode Systems, Laptop and Tablet Accessories, High-Speed External Storage, Multi-Protocol Type-C Equipment, High-Speed Test and Measurement Instruments.
USB-C Docking Stations
The TUSB544RNQT fits docking stations where USB-C connector launches, internal cables, and PCB routing can reduce the margin of high-speed lanes. Its four-channel architecture conditions multiple links up to 8.1 Gbps, while receive equalization and output de-emphasis help compensate for the losses encountered between a source and peripheral. Position the redriver near the connector or the more heavily impaired channel section, then tune the settings against the eye measured with the intended dock, cables, and peripheral. The 3.3 V single-supply operation simplifies rail planning, although each lane still requires continuous reference-plane transitions and careful return-path routing.
موصى به
DisplayPort Alt Mode Systems
The TUSB544RNQT is suitable for USB Type-C DisplayPort Alt Mode links that operate over long connectors, internal cable assemblies, or multilayer PCB routes. Its 8.1-Gbps capability supports the high-speed lanes used by compatible DisplayPort configurations, and its linear signal path preserves the source-to-sink data stream without changing DisplayPort protocol handling. Input equalization can counter attenuation, while output de-emphasis can improve the shape of the redriven differential signal. Because each physical link has a unique loss profile, engineers should evaluate lane-by-lane eye margin and test multiple cable lengths rather than applying one universal compensation setting.
موصى به
Laptop and Tablet Accessories
Compact USB-C accessories can use the TUSB544RNQT to recover high-speed signal integrity across connector and cable losses. The device's four channels support several compatible lanes within one 40-pin WQFN package, while its 3.3 V supply and maximum 8.1-Gbps operation suit modern Type-C equipment. In a space-constrained design, short differential traces, uninterrupted ground planes, and low-inductance decoupling are essential. Use the redriver where it can most effectively compensate the lossy section, and verify operation across the required cable length, host or sink family, and environmental temperature range. The linear architecture avoids adding protocol conversion to the accessory data path.
موصى به
High-Speed External Storage
The TUSB544RNQT can condition compatible high-speed lanes used by external storage accessories connected through USB Type-C. Storage systems often combine a connector, cable transition, protection components, and several PCB layers, creating insertion loss that may reduce the available eye. Four-channel redrive capability allows multiple lanes to be conditioned when the link architecture requires it. Input equalization addresses attenuation before the signal is retransmitted, and output de-emphasis provides an additional source-side control. Validate the complete link because file-transfer performance depends on stable eye margin at the receiver, not only successful enumeration. Maintain symmetric high-speed routing and preserve continuous ground references beneath every differential pair.
موصى به
Multi-Protocol Type-C Equipment
The protocol-agnostic architecture of the TUSB544RNQT makes it appropriate for multi-protocol Type-C equipment that must support more than one high-speed link mode. At data rates up to 8.1 Gbps, the four-channel device can provide consistent signal conditioning without implementing a separate redriver for every supported lane type. Its single 3.3 V operating supply simplifies the power architecture, while the 6 mm by 4 mm WQFN footprint supports compact boards. The source and sink still control protocol negotiation, and the system designer must confirm that each requested mode is electrically compatible with the redriver and channel-loss budget. Bench testing across each supported mode is essential.
موصى به
High-Speed Test and Measurement Instruments
The TUSB544RNQT can be used in USB Type-C test equipment, analyzer fixtures, and measurement systems where channel loss threatens high-speed signal integrity. Its four channels and 8.1-Gbps maximum data rate allow the instrument or fixture to present a more reliable electrical interface to a device under test. Receive equalization and output de-emphasis can compensate for fixture launches, cable adapters, and long interconnects, improving the probability that measurements reflect device behavior rather than an impaired channel. Use controlled impedance routing and short fixture connections, and document each equalization setting so test results remain repeatable across cable and sample changes. The redriver conditions signals without taking ownership of the protocol.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ TUSB544RNQT — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج |
|---|---|
| Product Type | USB Type-C multi-protocol linear redriver |
| Manufacturer | Texas Instruments |
| Package | 40-pin WQFN (RNQ) |
| Maximum Data Rate | 8.1 Gbps |
| Number of Channels | 4 channels |
| Supply Voltage | 3.3 V |
| Propagation Delay | 10.0 ns |
| Signal Conditioning | Input equalization and output de-emphasis |
| Operating Temperature Range | -40 C to +85 C |
| Lifecycle Status | Active |
أبرز الفروقات
- Four-channel high-speed signal conditioning (مقابلNo verified drop-in alternative was identified)
- Protocol-agnostic architecture (مقابلNo verified drop-in alternative was identified)
- Single 3.3 V operation (مقابلNo verified drop-in alternative was identified)
ملاحظات التصميم
Place the TUSB544RNQT near the connector or the most lossy part of the high-speed channel so that equalization acts before additional degradation. Use controlled-impedance, length-matched differential routing and preserve a continuous ground reference beneath each pair. Compare eye diagrams at the receiver before and after redrive, and tune receive equalization and output de-emphasis for the actual cable and connector population.
Keep the 3.3 V supply and ground connections short, place local decoupling at the device pins, and avoid routing high-speed signals beneath unrelated noisy circuitry. The 40-pin WQFN package requires careful land-pattern and thermal-pad assembly design. Follow the manufacturer's package drawing for exposed-pad geometry, solder mask, and paste because hand-soldering a fine-pitch QFN footprint can create hidden electrical shorts.
Do not treat the TUSB544RNQT as a protocol converter or guarantee that equalization repairs every failed link. Its 8.1-Gbps rating does not guarantee that every cable, connector, and PCB route has sufficient margin. Confirm source and sink compatibility, verify the configured equalization and de-emphasis levels, test the longest supported cable, and inspect eye height and jitter rather than relying only on a successful link enumeration.
A redriver can radiate energy if its output settings create excessive edge activity or if supply and ground connections are noisy. Start with the manufacturer's recommended configuration, compare conducted and radiated behavior before and after installation, and ensure that the 3.3 V reference supply is quiet. Avoid abrupt impedance discontinuities and unnecessary stubs because reflections can increase emissions and reduce the margin gained from equalization.
معلومات الامتثال
The manufacturer information identifies the part as active and specifies a -40 C to +85 C operating range, but no explicit environmental or material-compliance declarations are available for extraction.