TUSB6020PFCR - USB 2.0 HS OTG Controller | Texas Instruments
MPN: TUSB6020PFCR ✗ 停產TUSB6020PFCR 概覽
A USB 2.0 high-speed on-the-go controller is an interface IC that coordinates communications between a USB host or peripheral and another serial bus. The TUSB6020 bridges USB 2.0 high-speed traffic to the VLYNQ interface, allowing equipment designers to add dual-role USB connectivity without implementing the complete USB protocol stack in external logic. Its place in the hierarchy is interface controller, USB interface IC, interface integrated circuit, and semiconductor.
The TUSB6020 supports three listed supply voltages: 1.5 V, 1.8 V, and 3.3 V. Its operating temperature range is 0 °C to 70 °C, and the commercial-temperature grade is suitable for industrial-room-temperature equipment. The controller uses a gull-wing terminal arrangement in a square 80-terminal TQFP package, providing a high pin count for USB data, control, power, clock, and VLYNQ interface connections.
Technical operation centers on the USB 2.0 high-speed interface, OTG dual-role control, and the parallel-to-VLYNQ local bus bridge. A 78.1 mA supply-current figure is listed for the device. Unlike a simple USB transceiver, this component is a protocol-oriented controller designed to manage host and device functions and transfer data through the VLYNQ interface.
Typical uses include USB-to-VLYNQ storage peripherals, multifunction printers, set-top equipment, industrial data acquisition systems, and embedded USB bridges. The dual-role architecture is especially useful when a product must connect to both a USB host and an external USB peripheral while presenting a VLYNQ interface to its internal processing logic.
The principal design consideration is PCB implementation. Because this is an 80-terminal TQFP device with numerous high-speed USB signals, use the manufacturer pin description and layout guidance to assign every terminal. Keep USB traces short, provide a continuous ground reference, and follow the required decoupling and signal-routing practices to preserve USB 2.0 high-speed signal integrity.
This product page combines the manufacturer-device description with practical application guidance, package details, interface comparisons, sourcing information, and verified drop-in candidates. It is intended to help engineers determine whether the TUSB6020PFCR fits a USB 2.0 OTG-to-VLYNQ design before beginning board layout.
直接替換替代品,適用於 TUSB6020PFCR — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: TUSB6020PFCR (相同外形與佔位) — 差異在於 Local Bus Interface, Package Body Size.
TUSB6020PFC
✅ 直接替換聯絡詢價
查看資料表 →TUSB6020PFCG4
✅ 直接替換📋 參考替代品(不在目錄中)
TUSB6020PFCRG4
✅ 直接替換📋 參考替代品(不在目錄中)
TUSB6020PFCR 規格
| Device Type | USB 2.0 high-speed OTG dual-role controller |
| USB Interface | USB 2.0 high-speed |
| Local Bus Interface | VLYNQ serial interface with parallel interface |
| Supported Operating Modes | USB host and USB device dual-role operation |
| Supply Voltage Options | 1.5 V, 1.8 V, and 3.3 V |
| 供應電流 | 78.1 mA |
| 工作溫度範圍 | 0 °C to 70 °C |
| Temperature Grade | Commercial |
| 封裝 | 80-pin TQFP |
| Package Body Size | 12 mm × 12 mm |
| Terminal Count | 80 terminals |
| Terminal Form | Gull wing |
| Package Shape | Square |
| Mounting Technology | Surface mount |
| Datasheet Length | 20 pages |
| Datasheet File Size | 485 kbytes |
TUSB6020PFCR square 腳位配置指南
TUSB6020PFCR(square 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: TUSB6020PFCR.
請參閱 資料表 以查看完整腳位配置。
典型應用
TUSB6020PFCR 適用於 6 應用s: USB-to-VLYNQ Storage Bridge, Multifunction Printer Interface, Industrial Data-Acquisition Gateway, Set-Top Media Adapter, USB Peripheral Test Fixture, Embedded USB-to-Local-Bus Bridge.
USB-to-VLYNQ Storage Bridge
The TUSB6020PFCR fits a storage peripheral that must expose VLYNQ to internal logic while providing USB 2.0 high-speed connectivity to a host. Its dual-role OTG architecture supports both host and device operation, and the parallel interface provides a defined path between the USB controller and VLYNQ-side circuitry. The listed 1.5 V, 1.8 V, and 3.3 V supply options allow the bridge to fit systems with multiple logic rails. Board implementation should use short USB high-speed routes, continuous ground reference planes, and the manufacturer-recommended decoupling because the 80-terminal package combines USB, clock, power, and VLYNQ signals in a 12 mm square footprint.
推薦
Multifunction Printer Interface
A multifunction printer can use the TUSB6020PFCR to manage USB 2.0 high-speed host and device connectivity while communicating with an embedded controller through VLYNQ. The dual-role capability is valuable when the product must connect directly to a computer as a device and also support host-side access to an external USB peripheral. Its commercial 0 °C to 70 °C operating range suits temperature-controlled printer electronics. Layout should reserve solid ground beneath the USB traces, minimize stubs and layer changes, and follow the pin-description table when assigning the parallel and VLYQN interface signals.
推薦
Industrial Data-Acquisition Gateway
The TUSB6020PFCR can serve as the USB and VLYNQ interface in an industrial data-acquisition gateway. USB 2.0 high-speed provides the external connection to a host or service computer, while the VLYNQ interface links the controller to local acquisition logic. Its 78.1 mA listed supply current and three supported supply voltages provide useful constraints for power-supply design. Keep the device within the specified 0 °C to 70 °C range, separate noisy analog and switching circuitry from USB routing, and apply the manufacturer's recommended capacitor placement at each supply terminal.
推薦
Set-Top Media Adapter
In a set-top media adapter, the TUSB6020PFCR provides USB 2.0 high-speed dual-role connectivity while bridging data to a VLYNQ-based local bus. This arrangement can support both service access from a host and connection to an external USB peripheral without requiring two unrelated controllers. The 80-terminal TQFP package provides the necessary interface and control assignments, but it also requires disciplined fanout from the fine-pitch device. Engineers should preserve high-speed USB impedance continuity, provide an uninterrupted reference plane, and verify all 80 terminal assignments against the manufacturer pin table.
推薦
USB Peripheral Test Fixture
The TUSB6020PFCR is suitable for a test fixture designed to exercise both host and device behavior across a VLYNQ-connected target. Because the controller combines USB 2.0 high-speed OTG roles with a defined local-bus interface, it can simplify systems that need bidirectional role testing rather than a one-way peripheral interface. The commercial 0 °C to 70 °C range is appropriate for controlled laboratory or production-test environments. Use short USB routes, instrument-grade ground connections, and stable decoupling so that test results reflect the target rather than board-level signal-integrity errors.
推薦
Embedded USB-to-Local-Bus Bridge
The TUSB6020PFCR can bridge a USB 2.0 high-speed host or peripheral to a VLYNQ-based embedded subsystem. It is particularly useful when legacy or specialized internal logic uses VLYNQ and needs externally accessible USB connectivity. The controller supports 1.5 V, 1.8 V, and 3.3 V supply operation, allowing integration with several generations of digital logic. Designers should map the complete 80-pin assignment, maintain continuous return paths for USB signals, and confirm the controller's commercial temperature limit against the enclosure temperature rather than relying only on the PCB temperature.
推薦
推薦產品摘要
工程參考資料,適用於 TUSB6020PFCR — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | TUSB6020PFC | TUSB6020PFCG4 | TUSB6020PFCRG4 |
|---|---|---|---|---|
| Package | 80-TQFP (12x12) | 80-TQFP (12x12) | 80-TQFP (12x12) | 80-TQFP (12x12) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Device Type | USB 2.0 high-speed OTG dual-role controller | USB 2.0 OTG dual-role controller | USB 2.0 OTG dual-role controller | USB 2.0 OTG dual-role controller |
| Local Bus Interface | VLYNQ serial interface with parallel interface | VLYNQ interface | VLYNQ interface | VLYNQ interface |
| Supply Voltage Options | 1.5 V, 1.8 V, and 3.3 V | 1.5 V, 1.8 V, and 3.3 V | 1.5 V, 1.8 V, and 3.3 V | 1.5 V, 1.8 V, and 3.3 V |
| Terminal Count | 80 terminals | 80 terminals | 80 terminals | 80 terminals |
| Package Body Size | 12 mm × 12 mm | 12 mm × 12 mm | 12 mm × 12 mm | 12 mm × 12 mm |
| USB Operating Mode | High-speed host and device dual-role | High-speed host and device dual-role | High-speed host and device dual-role | High-speed host and device dual-role |
主要差異化特點
- Combines USB 2.0 high-speed dual-role control with VLYNQ bridging (對比TUSB4041IPAP)
- Maintains the same 80-pin TQFP mechanical interface for direct substitution (對比TUSB6020PFCRG4)
- Supports three listed low-voltage supply options (對比TUSB6020PFC)
設計說明
Treat the USB 2.0 high-speed routes as controlled-impedance signals. Keep D+ and D+ or the corresponding USB differential pair routed over a continuous ground reference, minimize stubs and vias, and avoid splitting the reference plane beneath the pair. Transcribe the manufacturer terminal assignments directly into the PCB footprint because the 80-pin TQFP includes USB, power, clock, control, and VLYNQ functions that cannot be inferred safely from neighboring pins.
Design the supply network for the listed 1.5 V, 1.8 V, or 3.3 V operating options and the 78.1 mA supply-current figure. Place the required bypass capacitors close to their associated supply terminals, keep return-current paths short, and verify capacitor selection against the manufacturer's recommended application circuit. If multiple rails are present, distinguish core, I/O, and analog domains in the schematic so that a nominal 1.8 V connection is not accidentally used for a 3.3 V domain.
Do not substitute an 80-pin device solely because the package appears similar. The TUSB6020-specific pin map, USB role behavior, VLYNQ interface, clock requirements, and supply arrangement must remain compatible. Before releasing a substitution, compare every terminal in the manufacturer pin table and review the replacement's ordering suffix and temperature grade. For existing boards, also verify that the selected source form matches the board's assembly process.
合規資訊
The manufacturer datasheet index identifies the component as a commercial-temperature USB interface controller, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is established by the available product information.