Texas Instruments

TUSB6020PFCR - USB 2.0 HS OTG Controller | Texas Instruments

부품 번호: TUSB6020PFCR ✗ 단종
1.5 V, 1.8 V, and 3.3 V Vdss 78.1 mA Id 80-pin TQFP Package
MOQ: 1 |

TUSB6020PFCR 개요

Texas Instruments TUSB6020PFCR is a USB 2.0 high-speed on-the-go dual-role controller with a 1.5 V, 1.8 V, and 3.3 V supply range, supplied in an 80-pin TQFP package measuring 12 mm by 12 mm. The device provides a parallel interface to a VLYNQ serial interface, supporting USB host and USB device roles in one controller.

A USB 2.0 high-speed on-the-go controller is an interface IC that coordinates communications between a USB host or peripheral and another serial bus. The TUSB6020 bridges USB 2.0 high-speed traffic to the VLYNQ interface, allowing equipment designers to add dual-role USB connectivity without implementing the complete USB protocol stack in external logic. Its place in the hierarchy is interface controller, USB interface IC, interface integrated circuit, and semiconductor.

The TUSB6020 supports three listed supply voltages: 1.5 V, 1.8 V, and 3.3 V. Its operating temperature range is 0 °C to 70 °C, and the commercial-temperature grade is suitable for industrial-room-temperature equipment. The controller uses a gull-wing terminal arrangement in a square 80-terminal TQFP package, providing a high pin count for USB data, control, power, clock, and VLYNQ interface connections.

Technical operation centers on the USB 2.0 high-speed interface, OTG dual-role control, and the parallel-to-VLYNQ local bus bridge. A 78.1 mA supply-current figure is listed for the device. Unlike a simple USB transceiver, this component is a protocol-oriented controller designed to manage host and device functions and transfer data through the VLYNQ interface.

Typical uses include USB-to-VLYNQ storage peripherals, multifunction printers, set-top equipment, industrial data acquisition systems, and embedded USB bridges. The dual-role architecture is especially useful when a product must connect to both a USB host and an external USB peripheral while presenting a VLYNQ interface to its internal processing logic.

The principal design consideration is PCB implementation. Because this is an 80-terminal TQFP device with numerous high-speed USB signals, use the manufacturer pin description and layout guidance to assign every terminal. Keep USB traces short, provide a continuous ground reference, and follow the required decoupling and signal-routing practices to preserve USB 2.0 high-speed signal integrity.

This product page combines the manufacturer-device description with practical application guidance, package details, interface comparisons, sourcing information, and verified drop-in candidates. It is intended to help engineers determine whether the TUSB6020PFCR fits a USB 2.0 OTG-to-VLYNQ design before beginning board layout.

드롭인 대체품: TUSB6020PFCR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: TUSB6020PFCR (동일 폼 팩터 및 풋프린트) — 차이점: Local Bus Interface, Package Body Size.

Texas Instruments
Local Bus Interface: VLYNQ serial interface
Package Body Size: 12 mm x 12 mm
비교 대상: TUSB6020PFCR →

TUSB6020PFC

✅ 드롭인
Texas Instruments
📦 80-TQFP (12x12)
USB 2.0 high-speed OTG dual-role controller · VLYNQ serial interface · 1.5 Mb/s · 12 Mb/s · 480 Mb/s · Parallel interface · 3.3 V · USB 2.0 PHY

가격 문의

데이터시트 보기 →

TUSB6020PFCG4

✅ 드롭인
📦 80-TQFP (12x12)
Same 80-terminal TQFP footprint, terminals, and principal performance characteristics; documented electrical parameter difference is 0%.

📋 참조 대체품 (카탈로그에 없음)

TUSB6020PFCRG4

✅ 드롭인
📦 80-TQFP (12x12)
Same 80-terminal TQFP footprint, terminals, and principal performance characteristics; documented electrical parameter difference is 0%.

📋 참조 대체품 (카탈로그에 없음)

TUSB6020PFCR 사양

Device Type USB 2.0 high-speed OTG dual-role controller
USB Interface USB 2.0 high-speed
Local Bus Interface VLYNQ serial interface with parallel interface
Supported Operating Modes USB host and USB device dual-role operation
Supply Voltage Options 1.5 V, 1.8 V, and 3.3 V
공급 전류 78.1 mA
동작 온도 범위 0 °C to 70 °C
Temperature Grade Commercial
패키지 80-pin TQFP
Package Body Size 12 mm × 12 mm
Terminal Count 80 terminals
Terminal Form Gull wing
Package Shape Square
Mounting Technology Surface mount
Datasheet Length 20 pages
Datasheet File Size 485 kbytes

TUSB6020PFCR square 핀 구성 가이드

TUSB6020PFCR(square 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

TUSB6020PFCR의 square 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: TUSB6020PFCR.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

TUSB6020PFCR 적합 용도: 6 애플리케이션s: USB-to-VLYNQ Storage Bridge, Multifunction Printer Interface, Industrial Data-Acquisition Gateway, Set-Top Media Adapter, USB Peripheral Test Fixture, Embedded USB-to-Local-Bus Bridge.

💾

USB-to-VLYNQ Storage Bridge

The TUSB6020PFCR fits a storage peripheral that must expose VLYNQ to internal logic while providing USB 2.0 high-speed connectivity to a host. Its dual-role OTG architecture supports both host and device operation, and the parallel interface provides a defined path between the USB controller and VLYNQ-side circuitry. The listed 1.5 V, 1.8 V, and 3.3 V supply options allow the bridge to fit systems with multiple logic rails. Board implementation should use short USB high-speed routes, continuous ground reference planes, and the manufacturer-recommended decoupling because the 80-terminal package combines USB, clock, power, and VLYNQ signals in a 12 mm square footprint.

🖨️

Multifunction Printer Interface

A multifunction printer can use the TUSB6020PFCR to manage USB 2.0 high-speed host and device connectivity while communicating with an embedded controller through VLYNQ. The dual-role capability is valuable when the product must connect directly to a computer as a device and also support host-side access to an external USB peripheral. Its commercial 0 °C to 70 °C operating range suits temperature-controlled printer electronics. Layout should reserve solid ground beneath the USB traces, minimize stubs and layer changes, and follow the pin-description table when assigning the parallel and VLYQN interface signals.

🏭

Industrial Data-Acquisition Gateway

The TUSB6020PFCR can serve as the USB and VLYNQ interface in an industrial data-acquisition gateway. USB 2.0 high-speed provides the external connection to a host or service computer, while the VLYNQ interface links the controller to local acquisition logic. Its 78.1 mA listed supply current and three supported supply voltages provide useful constraints for power-supply design. Keep the device within the specified 0 °C to 70 °C range, separate noisy analog and switching circuitry from USB routing, and apply the manufacturer's recommended capacitor placement at each supply terminal.

📺

Set-Top Media Adapter

In a set-top media adapter, the TUSB6020PFCR provides USB 2.0 high-speed dual-role connectivity while bridging data to a VLYNQ-based local bus. This arrangement can support both service access from a host and connection to an external USB peripheral without requiring two unrelated controllers. The 80-terminal TQFP package provides the necessary interface and control assignments, but it also requires disciplined fanout from the fine-pitch device. Engineers should preserve high-speed USB impedance continuity, provide an uninterrupted reference plane, and verify all 80 terminal assignments against the manufacturer pin table.

🔧

USB Peripheral Test Fixture

The TUSB6020PFCR is suitable for a test fixture designed to exercise both host and device behavior across a VLYNQ-connected target. Because the controller combines USB 2.0 high-speed OTG roles with a defined local-bus interface, it can simplify systems that need bidirectional role testing rather than a one-way peripheral interface. The commercial 0 °C to 70 °C range is appropriate for controlled laboratory or production-test environments. Use short USB routes, instrument-grade ground connections, and stable decoupling so that test results reflect the target rather than board-level signal-integrity errors.

🧩

Embedded USB-to-Local-Bus Bridge

The TUSB6020PFCR can bridge a USB 2.0 high-speed host or peripheral to a VLYNQ-based embedded subsystem. It is particularly useful when legacy or specialized internal logic uses VLYNQ and needs externally accessible USB connectivity. The controller supports 1.5 V, 1.8 V, and 3.3 V supply operation, allowing integration with several generations of digital logic. Designers should map the complete 80-pin assignment, maintain continuous return paths for USB signals, and confirm the controller's commercial temperature limit against the enclosure temperature rather than relying only on the PCB temperature.

What is the TUSB6020PFCR?
The TUSB6020PFCR is a Texas Instruments USB 2.0 high-speed on-the-go dual-role controller packaged in an 80-pin TQFP. It provides a parallel interface to the VLYNQ serial interface and can operate in USB host or USB device roles. According to the manufacturer datasheet, this dual-role operation is intended to provide a seamless interface between USB and VLYNQ-connected system logic.
What are the key specifications of TUSB6020PFCR that engineers should know?
The TUSB6020PFCR supports USB 2.0 high-speed, VLYNQ local-bus bridging, 1.5 V, 1.8 V, and 3.3 V supply operation, and a 0 °C to 70 °C commercial temperature range. It has 80 gull-wing terminals in a 12 mm by 12 mm square TQFP package, with a listed supply current of 78.1 mA. These specifications define its core role as a USB interface controller rather than a basic transceiver.
Where can I download the TUSB6020PFCR datasheet PDF?
The TUSB6020PFCR datasheet PDF can be obtained through the Texas Instruments product documentation link on this page. The manufacturer document describes the USB 2.0 high-speed OTG dual-role controller, VLYNQ interface, electrical characteristics, terminal descriptions, and recommended implementation. Use that document to confirm pin assignments, supply sequencing, and PCB layout requirements before releasing a design.
Where can I find the TUSB6020PFCR pinout?
Use the pin-description table in the TUSB6020PFCR manufacturer datasheet to locate every terminal in the 80-pin TQFP package. The device combines high-speed USB signals, VLYNQ interface signals, clocks, control functions, and supply connections across 80 gull-wing terminals. A published pin table should be transcribed directly into the PCB library and checked against the package drawing before fabrication.
Which supply voltages can the TUSB6020PFCR use?
The TUSB6020PFCR can operate from 1.5 V, 1.8 V, or 3.3 V, as stated in the manufacturer datasheet information. The appropriate rail must match the voltage requirements of the associated system interface and the decoupling values specified for the operating condition. Do not infer permissible rail combinations or sequencing rules without checking the electrical-characteristics and power-sequencing sections.
What is the operating temperature range of TUSB6020PFCR?
The TUSB6020PFCR is specified for operation from 0 °C to 70 °C. This is a commercial-temperature-grade component intended for systems operating within that range. For equipment exposed to temperatures below 0 °C or above 70 °C, select a controller grade explicitly specified for the required ambient and junction temperatures.
What is the difference between TUSB6020PFC and TUSB6020PFCR?
TUSB6020PFC and TUSB6020PFCR use the same 80-pin TQFP device and are identified as completely interchangeable in the available cross-reference information. Their principal documented distinction is the ordering suffix associated with the shipping format, while the electrical characteristics and terminal assignments remain consistent. Confirm the reel-versus-tray requirement and current manufacturer availability before substitution.
Can TUSB6020PFCRG4 replace TUSB6020PFCR?
Yes, the available cross-reference information identifies TUSB6020PFCRG4 as a direct TQFP replacement with consistent terminals, package, and principal performance characteristics. Both devices use the 80-pin 12 mm by 12 mm TQFP package. Verify the orderable suffix, temperature grade, lifecycle status, and any marking requirements before using it as a production substitute.
When should I choose TUSB6020PFCR over another USB interface controller?
Choose the TUSB6020PFCR when the design specifically requires USB 2.0 high-speed OTG host and device roles together with a VLYNQ local-bus interface. It is less appropriate when the system needs only a basic USB transceiver, a USB Type-C port controller, or another local bus. The decisive selection criteria are dual-role USB 2.0 support, VLYNQ interoperability, package compatibility, and power-rail compatibility.
Is the TUSB6020PFCR suitable for industrial USB-to-VLYNQ equipment?
The TUSB6020PFCR is suitable for industrial equipment expected to remain within its specified 0 °C to 70 °C operating range. Its USB 2.0 high-speed OTG dual-role operation and VLYNQ interface suit embedded bridges, data-acquisition equipment, and storage peripherals. For wider environmental ranges, tighter USB compliance requirements, or extended qualification programs, choose a device explicitly specified for those conditions.
What is the best drop-in replacement for TUSB6020PFCR?
The strongest documented drop-in candidate is TUSB6020PFCRG4 because it retains the 80-pin TQFP package, terminal arrangement, and principal performance characteristics. TUSB6020PFC and TUSB6020PFCG4 are also identified as compatible TQFP alternatives with consistent electrical and functional characteristics. Validate procurement status, package shipping format, and temperature requirements before approving a substitution.
What can replace TUSB6020PFCR?
Compatible replacements for the TUSB6020PFCR include TUSB6020PFC, TUSB6020PFCG4, and TUSB6020PFCRG4. Cross-reference information identifies these parts as TQFP devices with consistent terminals and principal performance characteristics. Because the available information does not establish many additional electrically verified equivalents, use the manufacturer pin table and operating limits to confirm every proposed substitution.
Where can I buy TUSB6020PFCR and check its lead time?
Use the Request a Quote form on this page to request current TUSB6020PFCR availability, lead time, and order handling. Because the device is identified as obsolete in available sourcing information, its lifecycle and allocation status should be checked before a new production commitment. The form is the appropriate route for a quote tied to the exact 80-pin TQFP ordering suffix.
What is the current price of TUSB6020PFCR?
Use the Request a Quote form on this page to obtain the current unit cost and available quantity tiers for TUSB6020PFCR. The structured offer data is refreshed separately from the technical description because component pricing and legacy availability can change independently of the datasheet. Include the required package, quantity, and target date in the quote request.
Is TUSB6020PFCR in stock?
Current stock should be confirmed through the Request a Quote form on this page for the exact TUSB6020PFCR suffix. Available sourcing information identifies the part as obsolete, so inventory may consist of remaining legacy stock rather than production allocation. Do not base a production schedule on a generic product-page availability statement; request a quantity-confirmed response for the required shipment date.

엔지니어링 참조 데이터: TUSB6020PFCR — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the TUSB6020PFCR when a new or existing design specifically requires USB 2.0 high-speed OTG operation with both host and device roles plus a VLYNQ local-bus interface. Its 80-pin TQFP package, 1.5 V through 3.3 V supply options, and 0 °C to 70 °C commercial range define the principal design boundaries. TUSB6020PFC, TUSB6020PFCG4, and TUSB6020PFCRG4 are the documented direct alternatives because they retain the same package and stated principal characteristics. Select the suffix that matches the required shipping format and procurement plan. Do not choose a USB transceiver, hub controller, or USB-C bridge controller as a substitute unless the product can replace the VLYNQ and dual-role functions. For new production designs, confirm lifecycle availability and environmental requirements before committing to this legacy controller family.

대체품과의 비교

파라미터 이 제품 TUSB6020PFC TUSB6020PFCG4 TUSB6020PFCRG4
Package 80-TQFP (12x12) 80-TQFP (12x12) 80-TQFP (12x12) 80-TQFP (12x12)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Device Type USB 2.0 high-speed OTG dual-role controller USB 2.0 OTG dual-role controller USB 2.0 OTG dual-role controller USB 2.0 OTG dual-role controller
Local Bus Interface VLYNQ serial interface with parallel interface VLYNQ interface VLYNQ interface VLYNQ interface
Supply Voltage Options 1.5 V, 1.8 V, and 3.3 V 1.5 V, 1.8 V, and 3.3 V 1.5 V, 1.8 V, and 3.3 V 1.5 V, 1.8 V, and 3.3 V
Terminal Count 80 terminals 80 terminals 80 terminals 80 terminals
Package Body Size 12 mm × 12 mm 12 mm × 12 mm 12 mm × 12 mm 12 mm × 12 mm
USB Operating Mode High-speed host and device dual-role High-speed host and device dual-role High-speed host and device dual-role High-speed host and device dual-role

주요 차별점

  • Combines USB 2.0 high-speed dual-role control with VLYNQ bridging (vs TUSB4041IPAP)
  • Maintains the same 80-pin TQFP mechanical interface for direct substitution (vs TUSB6020PFCRG4)
  • Supports three listed low-voltage supply options (vs TUSB6020PFC)

설계 노트

Treat the USB 2.0 high-speed routes as controlled-impedance signals. Keep D+ and D+ or the corresponding USB differential pair routed over a continuous ground reference, minimize stubs and vias, and avoid splitting the reference plane beneath the pair. Transcribe the manufacturer terminal assignments directly into the PCB footprint because the 80-pin TQFP includes USB, power, clock, control, and VLYNQ functions that cannot be inferred safely from neighboring pins.

Design the supply network for the listed 1.5 V, 1.8 V, or 3.3 V operating options and the 78.1 mA supply-current figure. Place the required bypass capacitors close to their associated supply terminals, keep return-current paths short, and verify capacitor selection against the manufacturer's recommended application circuit. If multiple rails are present, distinguish core, I/O, and analog domains in the schematic so that a nominal 1.8 V connection is not accidentally used for a 3.3 V domain.

Do not substitute an 80-pin device solely because the package appears similar. The TUSB6020-specific pin map, USB role behavior, VLYNQ interface, clock requirements, and supply arrangement must remain compatible. Before releasing a substitution, compare every terminal in the manufacturer pin table and review the replacement's ordering suffix and temperature grade. For existing boards, also verify that the selected source form matches the board's assembly process.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The manufacturer datasheet index identifies the component as a commercial-temperature USB interface controller, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is established by the available product information.

데이터 검증일: 2026-11-16 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

TUSB6020PFCR datasheet TUSB6020PFCR pinout TUSB6020PFCR datasheet pdf TUSB6020PFCR schematic TUSB6020PFCR equivalent TUSB6020PFCR replacement TUSB6020PFCR cross reference TUSB6020PFCR vs TUSB6020PFC TUSB6020PFCR footprint Texas Instruments TUSB6020PFCR TUSB6020PFCR price TUSB6020PFCR stock TUSB6020PFCR application circuit

관련 부품 & 용어

Texas Instruments TUSB6020PFCR TUSB6020PFC TUSB6020PFCG4 TUSB6020PFCRG4 USB 2.0 USB high-speed USB On-The-Go OTG dual-role controller VLYNQ serial interface parallel interface USB interface IC interface controller integrated circuit semiconductor 80-TQFP TQFP package family gull-wing terminal surface-mount device USB-to-VLYNQ bridge dual-role host and device 0 °C to 70 °C commercial grade 78.1 mA supply current 1.5 V, 1.8 V, and 3.3 V supply rails
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기