VSC7156XYT-03 - 24-PHY 1.5/3.0Gbps SAS Expander | Analog Devices
MPN: VSC7156XYT-03 ✓ 啟用中VSC7156XYT-03 概覽
A Serial Attached SCSI expander is a semiconductor controller that consolidates multiple SAS links behind a wider SAS interface. In the technology hierarchy, the VSC7156XYT-03 is a SAS interface controller, an interface IC, and ultimately an integrated circuit used to expand storage connectivity. Its 24 physical-layer channels allow one expander device to manage more drive-facing links than a direct-attachment controller alone, reducing the number of expander functions required in larger storage architectures.
The principal documented features are 24 SAS PHYs, support for 1.5 Gbps and 3.0 Gbps operation, and compatibility with edge and fanout expander configurations. These capabilities suit storage systems that need multiple serial channels for disk or SSD access while presenting a scalable interface to a host-side SAS controller. The device targets embedded storage rather than general-purpose computing, where deterministic link management and support for established SAS expansion topologies are more important than general processor performance.
The VSC7156 architecture separates physical-layer signaling from higher-level storage management. Each PHY provides the electrical connection required by SAS links, while the expander coordinates port expansion and discovery across multiple physical connections. At 3.0 Gbps, the supported line rate provides substantially greater theoretical bandwidth than 1.5 Gbps operation, allowing systems to use faster SAS media when the complete storage path supports that rate. Actual end-to-end performance still depends on the attached controller, drives, cabling, backplane, firmware, and workload.
Typical applications include blade servers, JBOD enclosures, RAID systems, and embedded midrange or enterprise storage equipment. In each case, the VSC7156XYT-03 can provide the fanout needed to connect multiple SAS endpoints while preserving a structured expansion architecture. System designers should confirm compatibility among the host SAS controller, expander firmware, drive qualification, connector and cable implementation, and power-delivery design before production deployment.
For a new layout, preserve the recommended high-speed return paths and bypass-capacitor placement from the manufacturer datasheet. Confirm the exact package drawing, exposed-pad or thermal requirements, pin assignments, and maximum operating conditions for the XYT-03 ordering code before fabrication. Treat the board as a multi-gigabit signal-integrity design in which connector transitions, reference planes, power impedance, and grounding influence whether the advertised SAS rates are reached reliably.
This product page consolidates the documented SAS capabilities, intended storage applications, package-related uncertainties, and sourcing information for VSC7156XYT-03. It also provides practical guidance for comparing storage-interface options while avoiding unsupported assumptions about electrical or lifecycle details that require direct confirmation from the manufacturer documentation.
直接替換替代品,適用於 VSC7156XYT-03 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: VSC7156XYT-03 (相同外形與佔位).
此產品無可直接替換的替代品。
申請替代品VSC7156XYT-03 規格
| Product Type | SAS edge/fanout expander |
| Physical Layer Count | 24 PHYs |
| Minimum Documented SAS Rate | 1.5 Gbps |
| Maximum Documented SAS Rate | 3.0 Gbps |
| SAS Standard Support | ANSI T10 Serial Attached SCSI 1.0 and 1.1 |
| Supported Expander Modes | Edge and fanout |
| Target Storage Domain | Midrange and enterprise storage |
| Host Interface | Serial Attached SCSI |
VSC7156XYT-03 standard 腳位配置指南
VSC7156XYT-03(standard 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: VSC7156XYT-03.
請參閱 資料表 以查看完整腳位配置。
典型應用
VSC7156XYT-03 適用於 6 應用s: Blade Server Storage Expansion, JBOD Enclosure, RAID Storage System, Enterprise Storage Enclosure, Embedded SAS Storage Platform, SAS Storage Fanout Backplane.
Blade Server Storage Expansion
The VSC7156XYT-03 fits blade-server storage subsystems that need multiple SAS links behind a scalable internal architecture. Its 24 PHYs provide a large pool of physical connections, while support for 1.5 Gbps and 3.0 Gbps allows the system to accommodate both documented SAS operating rates. The edge and fanout functions are useful when storage drawers, drives, and expanders must be organized under a common SAS topology. Before deployment, validate the host controller, expander firmware, blade backplane, connector path, and power architecture as one complete system.
推薦
JBOD Enclosure
A JBOD enclosure can use the VSC7156XYT-03 to consolidate numerous drive-facing SAS connections into an organized expanded storage fabric. The device's 24 physical layers are suited to high-density enclosures where many disk or SSD endpoints need attachment through an expander rather than separate direct connections to one host port. Its documented 1.5 Gbps and 3.0 Gbps rates support two storage-generation speeds. The enclosure designer must still verify hot-plug behavior, drive qualification, cable reach, failover behavior, and thermal requirements.
推薦
RAID Storage System
The VSC7156XYT-03 is appropriate for RAID systems requiring multiple physical SAS connections for disks, SSDs, and downstream expanders. Twenty-four PHYs provide substantial fanout potential, while edge and fanout operation lets system architects organize storage paths more flexibly than a point-to-point topology. Support for 1.5 Gbps and 3.0 Gbps accommodates different attached-device capabilities. Production deployment requires validation of the RAID controller, expander firmware, enclosure management interface, device identifiers, path redundancy, and behavior during link and drive failures.
推薦
Enterprise Storage Enclosure
The VSC7156XYT-03 can serve in embedded enterprise storage enclosures that need high-port-count SAS expansion at 1.5 Gbps or 3.0 Gbps. Its 24-PHY architecture consolidates numerous serial links behind the expander function, helping designers construct scalable blade, JBOD, or RAID configurations. The device is aimed at established ANSI T10 SAS 1.0 and 1.1 environments, making it most suitable for systems whose software, drive vendors, cabling, and controllers already support these expansion topologies. Confirm system-level qualification before incorporating the device into new hardware.
推薦
Embedded SAS Storage Platform
Embedded storage platforms can use the VSC7156XYT-03 when a fixed 24-PHY expansion architecture is preferable to a collection of independent links. The controller supports the documented 1.5 Gbps and 3.0 Gbps SAS rates and provides both edge and fanout expansion roles, allowing it to participate in structured multi-tier storage designs. Integration still requires careful review of clocking, initialization, firmware, power sequencing, connector assignments, and signal integrity. The expander should be qualified together with the intended controller, media, backplane, and management software.
推薦
SAS Storage Fanout Backplane
The VSC7156XYT-03 is relevant to backplanes that distribute many drive-facing SAS connections through a central expander. Twenty-four PHYs create a practical base for high-density fanout designs, and the documented 3.0 Gbps rate can be selected when every component in the signal path supports that speed. Designers must preserve continuous reference planes, control connector and via discontinuities, and provide suitable power delivery at the operating rate. System qualification should include worst-case reach, insertion loss, crosstalk, connector retention, and fault isolation.
推薦
推薦產品摘要
工程參考資料,適用於 VSC7156XYT-03 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Brand | Analog Devices |
| Physical Layer Count | 24 PHYs |
| Supported SAS Rate | 1.5 Gbps and 3.0 Gbps |
| SAS Standard Support | ANSI T10 SAS 1.0 and 1.1 |
| Expander Modes | Edge and fanout |
| Primary Applications | Blade servers, JBODs, and RAID systems |
| Target Segment | Embedded midrange and enterprise storage |
主要差異化特點
- High physical-layer count for embedded SAS expansion (對比VSC7156)
- Support for two documented SAS operating rates (對比VSC7156)
- Combined edge and fanout expander operation (對比VSC7156)
設計說明
Design the VSC7156XYT-03 interconnect as a controlled-impedance, multi-gigabit SAS system. Follow the manufacturer's reference-plane and layer-transition guidance, minimize vias and stubs, and avoid discontinuities between the controller and external SAS devices. Validate insertion loss, return loss, crosstalk, and connector performance across the complete backplane rather than evaluating only the IC package. The documented 3.0 Gbps capability is a device characteristic only when the complete signal path supports that rate.
Confirm the exact supply rails, tolerance, sequencing, and decoupling requirements from the VSC7156 datasheet before schematic release. Place required bypass capacitors close to their assigned supply pins and provide low-impedance power and ground planes. Because this is a high-speed interface device, power-delivery impedance can affect signal integrity as well as logic stability. Validate startup, shutdown, load transient, and fault-recovery behavior with the intended SAS controller, expander configuration, and connected storage devices.
Assign every VSC7156XYT-03 signal from the exact XYT-03 package drawing and pin-description table. Pay particular attention to clocking, reset, configuration, serial links, supply rails, and ground connections, and maintain the recommended keepout and via patterns around clock and high-speed nets. Do not infer exposed-pad or thermal-pad connections from a generic package family. Review the final assembly drawing against the ordered MPN so that pad geometry, paste, solder mask, and assembly orientation remain mutually consistent.
合規資訊
The exact package, temperature grade, and ordering-code documentation must be checked before assigning environmental or automotive compliance. The -03 suffix alone does not establish AEC-Q100 qualification, RoHS status, REACH status, lead-free status, or halogen-free status.