Microchip Technology

VSC7424XJG-12 - 10-Port Gigabit Ethernet Switch | Microchip

부품 번호: VSC7424XJG-12 ✓ 활성
672-HSBGA, 27 mm x 27 mm Package Gigabit Ethernet Speed
MOQ: 1 |

VSC7424XJG-12 개요

The Microchip VSC7424XJG-12 is a 10-port managed Layer 2 Gigabit Ethernet switch with eight integrated copper PHYs, supplied in a 672-ball HSBGA package measuring 27 mm by 27 mm. The device is based on the SparX-III-10 family and uses Microchip's 65 nm SimpliPHY technology to integrate copper Ethernet connectivity and switching functions in one package. A serial host interface provides configuration and control access for managed network equipment.

A Gigabit Ethernet switch is a network-semiconductor device that receives Ethernet frames on multiple ports and forwards them according to Layer 2 addresses. An integrated copper PHY combines digital Ethernet framing with the physical-layer circuitry required to communicate over twisted-pair cabling. By integrating eight copper PHYs into the switching device, the VSC7424XJG-12 reduces the number of separate physical-layer components required in a multiport network design while retaining centralized packet forwarding and management.

The VSC7424 family's defining features include its 10-port configuration, eight integrated copper PHYs, and 65 nm SimpliPHY implementation. Microchip describes the device as a highly integrated and power-conscious option for managed Ethernet switching. The SparX-III-10 designation identifies the switching platform used in the part, while the 672-HSBGA package supports the substantial ball count required for integrated high-speed Ethernet I/O, power delivery, ground connections, and control signals.

The device is positioned for equipment that requires several copper Gigabit Ethernet connections in a limited board area. Relevant implementation considerations include careful high-speed layer-transition routing, controlled-length Ethernet differential pairs, solid return-path construction, decoupling close to supply pins, and compliance testing across all ten ports. Because the package is not a standard small-outline package, PCB designers should use the manufacturer's land pattern and pin-assignment documentation rather than infer dimensions from a generic HSBGA drawing.

Typical end uses include industrial Ethernet switches, network-interface appliances, embedded communications equipment, access systems, and other managed infrastructure products requiring multiple Gigabit Ethernet ports. For these systems, the integrated copper PHYs can simplify board partitioning, while the serial management interface supports configuration by an embedded host. The trade-off is a large, high-pin-count BGA package whose assembly, inspection, and prototype rework demands are greater than those of a leaded or small-outline switch.

This product page consolidates the manufacturer-defined port count, PHY integration, process technology, package, interface, and compliance attributes with application guidance and a clearly scoped replacement analysis. It also distinguishes orderable variants by the electrical details that must be confirmed in the hardware design rather than treating package similarity alone as proof of pin-compatible interchangeability.

드롭인 대체품: VSC7424XJG-12 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

VSC7424XJG-02

✅ 드롭인
📦 672-HSBGA (27x27)
Uses the same 672-HSBGA package and SparX-III-10 platform, but suffix-specific electrical limits and revision details may differ; the -12 order code must be checked against the -02 family document before substitution

📋 참조 대체품 (카탈로그에 없음)

VSC7424XJG-12 최대 정격 & 전기적 특성

Product Type Managed Layer 2 Gigabit Ethernet switch
Total Port Count 10 ports
Integrated Copper PHY Count 8 PHYs
Copper Ethernet Speed Gigabit Ethernet
Switching Architecture SparX-III-10
Host Control Interface Serial interface
Process Technology 65 nm SimpliPHY
패키지 672-HSBGA, 27 mm x 27 mm
실장 유형 Surface mount
RoHS Classification RoHS3
Moisture Sensitivity Level MSL1
Number of I/O Balls 672 balls

VSC7424XJG-12 672-hsbga, 27 mm x 27 mm 핀 구성 가이드

VSC7424XJG-12(672-hsbga, 27 mm x 27 mm 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

VSC7424XJG-12의 672-hsbga, 27 mm x 27 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: VSC7424XJG-12.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

VSC7424XJG-12 적합 용도: 6 애플리케이션s: Industrial Managed Ethernet Switching, Network Interface Appliances, Embedded Communications Equipment, Access and Edge Network Equipment, Gigabit Ethernet Test and Measurement, Secure Network Appliances.

🏭

Industrial Managed Ethernet Switching

The VSC7424XJG-12 fits managed industrial Ethernet equipment that needs ten switch ports and eight integrated copper PHYs within one device. Its SparX-III-10 architecture provides a concentrated Layer 2 switching function, while the serial interface allows an embedded controller to configure the network equipment. The 27 mm by 27 mm 672-HSBGA can reduce the number of separate PHY packages, although it requires a high-density PCB, controlled BGA assembly, and careful Ethernet signal routing. Industrial qualification should be confirmed from the exact order-code temperature and reliability specifications.

🌐

Network Interface Appliances

The VSC7424XJG-12 is suitable for network-interface appliances that aggregate multiple copper Gigabit Ethernet links into a managed switching platform. Eight integrated PHYs directly support twisted-pair port implementations, while the 10-port SparX-III-10 configuration provides additional switching resources within a single package. A serial management connection allows an embedded processor to handle configuration and monitoring. The principal board-level constraint is the 672-ball HSBGA, which demands a registered PCB stack-up, fine-pitch assembly capability, and careful separation of high-speed differential routing from noisy power paths.

🔧

Embedded Communications Equipment

The VSC7424XJG-12 can serve as the central Ethernet switching element in embedded communications equipment requiring multiple Gigabit connections and host-managed Layer 2 forwarding. Integrating eight copper PHYs with the SparX-III-10 switch reduces external PHY count and simplifies physical-port assignment in a multi-interface product. The serial control interface provides a path for embedded configuration software. Designers should reserve clean power and ground distribution for the 672-HSBGA and route each copper Ethernet differential pair as a controlled-impedance structure according to the manufacturer reference design.

🖥️

Access and Edge Network Equipment

The VSC7424XJG-12 supports access and edge equipment requiring ten managed switch ports in a single high-density package. The eight integrated copper PHYs are particularly useful where the enclosure provides several RJ45-based Gigabit Ethernet connections, and the SparX-III-10 platform centralizes Layer 2 forwarding. An embedded host can use the serial interface for configuration, status monitoring, and controlled startup. Board implementation must account for connector placement, chassis or enclosure heat dissipation, and the assembly yield associated with a 672-ball BGA.

📡

Gigabit Ethernet Test and Measurement

The VSC7424XJG-12 can be used in network test or measurement equipment that requires a high-density managed switching block. Ten ports allow multiple copper links to be routed through a common Layer 2 fabric, while eight integrated PHYs reduce the number of external copper transceiver devices required. The serial interface can connect the switch to an instrument controller for configuration and status collection. For accurate measurements, designers should keep Ethernet traces short, provide stable references and supplies, and follow the manufacturer's recommended BGA pad and via layout to minimize insertion loss.

🛡️

Secure Network Appliances

The VSC7424XJG-12 is applicable to secure network appliances that combine multiple wired Gigabit Ethernet interfaces with centralized Layer 2 management. The eight integrated copper PHYs provide a compact foundation for firewall, gateway, and secure-access products, while the 10-port SparX-III-10 platform supports multiport traffic forwarding. A host processor can control the device through the serial interface. In a security-oriented design, isolate management access, validate all external Ethernet paths for compliance, and keep high-speed routing and power distribution separate from sensitive auxiliary circuitry.

What is the Microchip VSC7424XJG-12?
The VSC7424XJG-12 is a 10-port managed Layer 2 Gigabit Ethernet switch with eight integrated copper PHYs. According to the Microchip product page, the device belongs to the SparX-III-10 switching family and uses 65 nm SimpliPHY technology. It is packaged in a 672-HSBGA measuring 27 mm by 27 mm and is intended for network equipment requiring multiple Gigabit Ethernet ports in one highly integrated component.
How many Ethernet ports does VSC7424XJG-12 provide?
The VSC7424XJG-12 provides 10 ports in total and integrates eight copper PHYs. According to the Microchip VSC7424 product page, the integrated PHYs support copper Gigabit Ethernet connectivity within the switching device. Because the package has 672 balls, engineers should consult the manufacturer pin-assignment table to identify the exact signal assigned to each external interface rather than assuming all ten ports have identical physical connections.
What technology and switching platform are used in VSC7424XJG-12?
The VSC7424XJG-12 uses Microchip's 65 nm SimpliPHY process technology and the SparX-III-10 switching platform. The Microchip product page identifies SimpliPHY as the basis for the highly integrated implementation and describes the device as an integrated 10-port Gigabit Ethernet switch with eight copper PHYs. This combination supports high port density while keeping the Ethernet physical-layer circuitry in the same package as the switching functions.
What package does the VSC7424XJG-12 use?
The VSC7424XJG-12 uses a 672-HSBGA package measuring 27 mm by 27 mm. The manufacturer product listing identifies the package as 672-HSBGA, and a distributor technical listing independently associates the part with a 672-HSBGA. This high-ball-count BGA requires a manufacturer-approved PCB land pattern, X-ray inspection, and assembly process controls appropriate for large-array BGAs.
Where can I download the VSC7424XJG-12 datasheet PDF?
The VSC7424XJG-12 datasheet can be obtained from the linked Microchip documentation and the official VSC7424 product page. The available Microchip family document is titled VMDS-10393 and covers VSC7424-02, VSC7425-02, VSC7426-02, and VSC7427-02 revisions. Before using that document for the exact VSC7424XJG-12 order code, confirm its ordering-information section and the latest revision status against the product page.
Where is the VSC7424XJG-12 pinout and land pattern?
The VSC7424XJG-12 pinout and land pattern must be taken from Microchip's device documentation because the device uses a 672-ball HSBGA rather than a standard small-outline package. The manufacturer datasheet provides the authoritative ball assignments, while the package drawing and PCB design guidance provide the land pattern. Do not infer the pinout from a generic 672-ball BGA symbol or from another switch with a different port arrangement.
Is the VSC7424XJG-12 suitable for industrial Ethernet equipment?
The VSC7424XJG-12 is functionally suitable for managed equipment requiring several Gigabit Ethernet copper ports, but the exact industrial suitability depends on temperature grade and qualification. The manufacturer identifies a 10-port switch with eight integrated copper PHYs, while a distributor listing records RoHS3 and MSL1 classifications. Confirm the operating-temperature limits and any industrial qualification in the exact order-code documentation before release.
What is the difference between VSC7424XJG-12 and VSC7424XJG-02?
Both are associated with the VSC7424 family and the 672-HSBGA package, but their suffix-defined electrical specifications must be checked before substitution. The Microchip family datasheet expressly covers the -02 revision alongside VSC7425-02, VSC7426-02, and VSC7427-02, whereas the exact -12 order code is identified by the Microchip product and distributor listings. Both use the SparX-III-10 platform, but equivalent package size and switch family do not by themselves guarantee identical pin compatibility.
When should I choose VSC7424XJG-12 over another managed Ethernet switch?
Choose the VSC7424XJG-12 when a design needs 10 Gigabit Ethernet switch ports, eight integrated copper PHYs, and a serial management interface in a single SparX-III-10 device. Its 672-HSBGA is appropriate for manufacturing infrastructure that can support large-array BGA assembly. For a smaller board, fewer ports, or a different management interface, a less densely integrated switch may reduce package and assembly complexity.
What is the best drop-in replacement for VSC7424XJG-12?
No drop-in replacement can be confirmed solely from the available part listings. VSC7424XJG-02 uses the same 672-HSBGA family package and SparX-III-10 platform, making it the closest documented candidate for engineering review, but matching package and platform do not establish identical ball functions, timing, electrical limits, or firmware requirements. Use the Request a Quote form on this page to discuss an exact-match sourcing request.
Can VSC7424XJG-12 replace a VSC7428XJG-12?
The VSC7424XJG-12 should not be treated as a drop-in replacement for the VSC7428XJG-12 without a complete pin, protocol, and feature comparison. The available comparison result identifies both parts as related VSC switch options, while the VSC7424 is specifically described as a 10-port device with eight integrated copper PHYs. A different VSC7428 configuration may use a different port arrangement, SerDes arrangement, clocking scheme, or management interface.
Where can I buy VSC7424XJG-12 online?
Use the Request a Quote form on this page to request the VSC7424XJG-12, current availability, lead time, and minimum order quantity. The manufacturer page and distributor search results identify the exact part, but a live quote is the appropriate way to establish the current commercial terms for this large-array BGA device. Quote requests should state the required quantity, target date, and whether reel, tray, or another approved packing method is needed.
What is the price of VSC7424XJG-12?
Current commercial pricing for the VSC7424XJG-12 should be obtained through the Request a Quote form on this page. The available search results list the component and reference distributor inventory, but they do not provide a qualifying quantity-break price for the exact MPN. Request the quotation with your required quantity, packing preference, target date, and shipping destination so the response reflects the actual order configuration.
What is the lead time and stock status for VSC7424XJG-12?
Current stock and lead time for the VSC7424XJG-12 should be confirmed through the Request a Quote form on this page. One distributor search result reports inventory, but inventory can change without notice and should not be treated as a guaranteed allocation. Include the required quantity and target production date in the request to obtain a usable delivery commitment and any package or traceability requirements.
What are the key specifications engineers should know about VSC7424XJG-12?
The essential VSC7424XJG-12 specifications are its 10-port managed Layer 2 configuration, eight integrated copper PHYs, Gigabit Ethernet operation, SparX-III-10 platform, 65 nm SimpliPHY technology, and 672-HSBGA package. The Microchip product page establishes the port, PHY, process, and platform details, while distributor listings identify the serial interface, RoHS3 status, and MSL1 classification. Supply voltage, temperature range, and detailed timing limits require confirmation from the exact order-code datasheet.

엔지니어링 참조 데이터: VSC7424XJG-12 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the VSC7424XJG-12 when the product needs a 10-port managed Layer 2 Gigabit Ethernet switch with eight integrated copper PHYs and can support a 672-HSBGA assembly. Its serial management interface and SparX-III-10 platform are appropriate for network appliances, access equipment, and embedded communications products where central control of multiple copper links is required. Review VSC7424XJG-02 only as an engineering substitution candidate: it shares the package and switching family, but the -02 suffix has separate family-documentation coverage, so electrical limits, timing, ball functions, and qualification must be compared. Parts such as VSC7428XJG-12 should be considered only for a different port architecture, because a shared VSC product family does not establish drop-in compatibility. If the primary constraint is PCB area, assembly complexity, or the number of physical ports, a switch with fewer balls and a different feature set may be a better system-level choice.

대체품과의 비교

파라미터 이 제품 VSC7424XJG-02
Package 672-HSBGA (27x27) 672-HSBGA (27x27)
Brand Microchip Technology Microchip Technology
Product Type Managed Layer 2 Gigabit Ethernet switch Managed Layer 2 Gigabit Ethernet switch
Switching Platform SparX-III-10 SparX-III-10
Process Technology 65 nm SimpliPHY 65 nm SimpliPHY family

주요 차별점

  • Combines ten switch ports with eight integrated copper PHYs (vs VSC7424XJG-02)
  • High port integration in a single switching package (vs VSC7424XJG-02)
  • Exact order-code identification for procurement (vs VSC7424XJG-02)

설계 노트

Use Microchip's 672-HSBGA land pattern and reference layout rather than a generic large-array BGA footprint. Route each copper Gigabit Ethernet pair as a controlled-impedance differential structure, keep the two conductors closely coupled, minimize vias, and provide a continuous reference plane beneath the pair. Confirm layer transitions and connector escape geometry with the manufacturer reference design before releasing the PCB stack-up.

Partition the BGA power balls according to the manufacturer's supply and ground recommendations, and place the required decoupling capacitors as close to their assigned device balls as the land pattern permits. Avoid sharing narrow copper necks between high-current and quiet circuits. Validate the final rail sequence, ripple, and startup behavior at the connector, switch core, and integrated PHY supply domains.

The 672-HSBGA concentrates many high-speed signals and supply connections into a 27 mm by 27 mm area, so thermal design must consider the complete Ethernet switching load rather than a single nominal condition. Follow the manufacturer's layer-stacking and via-array recommendations, provide uninterrupted ground planes beneath the device where permitted, and evaluate junction temperature with realistic port activity and enclosure conditions.

Do not treat VSC7424XJG-12 and VSC7424XJG-02 as interchangeable merely because both use the 672-HSBGA package and SparX-III-10 platform. Compare ordering information, ball assignments, electrical limits, timing, clocking, firmware support, and qualification. Likewise, verify whether a proposed VSC7428 or competing switch exposes the same signal functions and external interfaces before calling it a drop-in replacement.

규정 준수 정보

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The product listing records RoHS3 compliance and MSL1. The available product information does not establish REACH, halogen-free, conflict-minerals, or automotive qualification status for this exact order code.

데이터 검증일: 2026-11-16 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

VSC7424XJG-12 datasheet VSC7424XJG-12 pinout VSC7424XJG-12 datasheet pdf VSC7424XJG-12 672-HSBGA VSC7424XJG-12 10 port VSC7424XJG-12 8 copper PHYs VSC7424XJG-12 equivalent VSC7424XJG-12 replacement VSC7424XJG-12 vs VSC7424XJG-02 VSC7424XJG-12 footprint VSC7424XJG-12 application circuit VSC7424XJG-12 price VSC7424XJG-12 stock Microchip VSC7424XJG-12

관련 부품 & 용어

Microchip Technology VSC7424XJG-12 VSC7424XJG-02 VSC7424 SparX-III-10 Managed Layer 2 switch Gigabit Ethernet switch Ethernet interface IC Integrated copper PHY SimpliPHY 65 nm process technology Serial interface 672-HSBGA 27 mm by 27 mm package Surface-mount BGA Industrial Ethernet Network access equipment Gigabit Ethernet Copper Ethernet Layer 2 forwarding RoHS3 MSL1 Managed network equipment Embedded communications
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기