VSC8531XMW-03 - 1G Ethernet PHY | Microchip | 48-QFN
MPN: VSC8531XMW-03 ✓ 啟用中VSC8531XMW-03 概覽
A copper Ethernet PHY is a physical-layer interface IC that converts digital data into signals suitable for twisted-pair cabling and converts received cable signals back into digital data. Within the network architecture, it sits between a MAC or Ethernet controller and a network transformer or integrated copper interface. The VSC8531 combines that physical-layer function with energy-management and clocking features intended to reduce power use and support synchronization in network systems.
The principal feature set includes one 10/100/1000BASE-T Ethernet channel, IEEE 802.3az EEE, Wake-on-LAN, synchronous Ethernet support, and broad LVCMOS I/O compatibility. These capabilities suit access equipment, industrial Ethernet endpoints, embedded gateways, and network infrastructure where board area is constrained. The 48-QFN package measures 6 mm on each side and includes an exposed pad according to the product description.
The device separates digital and analog supply domains, with the listing identifying 0.95 V and 2.38 V operating voltages. That arrangement allows a PHY to operate alongside modern digital logic while using a dedicated supply for its analog circuitry. Its RGMII and RMII options let the same PHY family address processors with different parallel Ethernet interfaces, while SyncE support benefits designs that require deterministic timing across the network.
Typical deployments include compact network switches, industrial controllers, telecom access equipment, and embedded communications systems. In these systems, the PHY connects a digital MAC or processor to the copper network medium, allowing standard 10/100/1000-Mbps Ethernet connectivity without requiring a larger discrete transceiver arrangement.
Designers should use the manufacturer datasheet pin-description table when assigning every signal, especially the exposed pad, clock interface, power rails, and high-speed copper-side connections. Layout should follow the manufacturer’s recommended decoupling and magnetics-coupling guidance, with controlled differential routing and short return paths on the copper Ethernet side.
This page organizes the verified product identity, interface capabilities, package details, sourcing information, drop-in alternatives, and engineering guidance into one procurement-oriented reference for engineers evaluating the VSC8531XMW-03.
直接替換替代品,適用於 VSC8531XMW-03 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: VSC8531XMW-03 (相同外形與佔位) — 差異在於 Package, Product Type, MAC Interface, Number of Ports, Wake-on-LAN.
VSC8531XMW-05
✅ 直接替換聯絡詢價
查看資料表 →VSC8531XMW
✅ 直接替換聯絡詢價
查看資料表 →VSC8531XMW-03 規格
| Product Type | Single-port copper Ethernet PHY |
| Ethernet Data Rates | 10 Mbps, 100 Mbps, and 1 Gbps |
| Number of Ports | 1 port |
| Host Interface | RGMII or RMII |
| Operating Voltage | 0.95 V and 2.38 V |
| Energy Efficient Ethernet | IEEE 802.3az supported |
| Wake-on-LAN | Supported |
| Synchronous Ethernet | SyncE supported |
| I/O Logic Compatibility | LVCMOS |
| 封裝 | 48-pin QFN, 6 mm × 6 mm |
| Exposed Pad | Present |
| 安裝類型 | Surface mount |
| Maximum Data Rate | 1 Gbps |
| Carrier Type | Copper Ethernet |
VSC8531XMW-03 48-pin qfn, 6 mm × 6 mm 腳位配置指南
VSC8531XMW-03(48-pin qfn, 6 mm × 6 mm 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: VSC8531XMW-03.
請參閱 資料表 以查看完整腳位配置。
典型應用
VSC8531XMW-03 適用於 6 應用s: Compact Network Switch, Industrial Ethernet Gateway, Telecom Access Equipment, Embedded Communications Controller, Wake-on-LAN Network Endpoint, Synchronized Ethernet Equipment.
Compact Network Switch
The VSC8531XMW-03 is well suited to a compact copper Ethernet switch because it provides one 10/100/1000-Mbps port in a 6 mm × 6 mm QFN package. RGMII or RMII connectivity allows the PHY to interface with a suitable switching controller, while SyncE support benefits equipment that needs deterministic timing. IEEE 802.3az Energy Efficient Ethernet can reduce power use on lightly loaded links. The main engineering consideration is routing the high-speed copper-side signals according to the manufacturer layout guidance and coupling them to the appropriate network transformer or magnetics arrangement.
推薦
Industrial Ethernet Gateway
The VSC8531XMW-03 can add 1 Gbps copper connectivity to an industrial gateway without the footprint of a larger multi-port transceiver. Its selectable RGMII or RMII host interface accommodates different embedded processors, and the broad LVCMOS support helps simplify digital integration. Wake-on-LAN is useful in equipment that must remain remotely accessible, while EEE can improve power efficiency when traffic is intermittent. Final industrial suitability depends on confirming the device’s specified operating-temperature and qualification requirements in the manufacturer documentation.
推薦
Telecom Access Equipment
The VSC8531XMW-03 targets space-constrained telecom access equipment requiring one copper Ethernet data rate option from 10 Mbps through 1 Gbps. Its small 48-QFN package preserves board area for line-card processing and interface circuitry, while SyncE provides a synchronization-oriented option for systems with timing requirements. The exposed-pad package also demands careful thermal and return-path layout. Use the manufacturer’s reference layout and power-supply recommendations to preserve signal integrity between the PHY, magnetics, and copper network connection.
推薦
Embedded Communications Controller
The VSC8531XMW-03 provides a dedicated physical-layer endpoint for embedded processors that lack an integrated copper Ethernet transceiver. RMII can reduce host-side pin requirements in cost-sensitive designs, while RGMII offers a higher-bandwidth parallel interface when the processor supports it. Operating rails of 0.95 V and 2.38 V permit integration with modern digital and analog supply domains. The design should include separate decoupling close to the device and carefully controlled clock and data routing to maintain interface timing and signal integrity.
推薦
Wake-on-LAN Network Endpoint
The VSC8531XMW-03 supports Wake-on-LAN, making it applicable to network endpoints that must be remotely awakened for maintenance, imaging, or telemetry collection. Combining this function with IEEE 802.3az EEE allows a system to retain remote-access behavior while reducing power consumption during periods of low link activity. The one-port architecture is appropriate for embedded appliances and controllers with a single copper uplink. Firmware, network-infrastructure support, and low-power behavior must be validated as a complete system rather than inferred from the PHY feature set alone.
推薦
Synchronized Ethernet Equipment
The VSC8531XMW-03 is suitable for network equipment that requires synchronous Ethernet capability alongside a compact 1 Gbps copper interface. SyncE can support networks in which timing information is distributed through Ethernet infrastructure, while the RGMII and RMII options provide flexibility for different controller architectures. The PHY’s 6 mm × 6 mm package helps reduce board area in line cards and access equipment. Clock-source topology, jitter performance, reset sequencing, and magnetics selection must be designed according to the manufacturer’s application guidance.
推薦
推薦產品摘要
工程參考資料,適用於 VSC8531XMW-03 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | VSC8531XMW-05 | VSC8531XMW |
|---|---|---|---|
| Package | 48-QFN (6 mm × 6 mm) | 48-QFN (6 mm × 6 mm) | 48-QFN (6 mm × 6 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Product Series | VSC8531 | VSC8531 | VSC8531 |
| Ethernet Port Count | 1 port | 1 port | 1 port |
| Maximum Data Rate | 1 Gbps | 1 Gbps | 1 Gbps |
| Host Interface | RGMII or RMII | RGMII or RMII | RGMII or RMII |
| Energy Efficient Ethernet | IEEE 802.3az supported | IEEE 802.3az supported | IEEE 802.3az supported |
| Wake-on-LAN | Supported | Supported | Supported |
| Synchronous Ethernet | SyncE supported | SyncE supported | SyncE supported |
主要差異化特點
- Compact single-port integration (對比VSC8531XMW)
- Flexible host connectivity (對比VSC8531XMW-05)
- Network power-management feature set (對比VSC8531XMW)
設計說明
Follow the manufacturer’s reference layout for the 48-QFN footprint and exposed pad. Place power-decoupling capacitors close to their associated supply pins, provide an uninterrupted ground reference beneath the device, and connect the exposed pad according to the datasheet. Avoid placing disruptive switching nodes or high-current return paths beneath the PHY, because both can degrade copper-side signal integrity.
Use controlled-impedance, tightly coupled differential routing for the copper Ethernet side and keep the PHY-to-magnetics path short. Follow the manufacturer’s interface timing layout for RGMII or RMII clock and data lines, and confirm the selected interface mode before layout release. Incorrect clock topology, unmatched pair geometry, or excessive trace length can cause data errors even when the nominal data-rate setting is correct.
Design the 0.95 V and 2.38 V rails independently and verify their sequencing, noise, and load-current requirements against the manufacturer datasheet. Use dedicated filtering for the analog supply domain and place the associated capacitors close to the PHY pins. The exact capacitor values and stability requirements must be taken from the recommended application circuit rather than generalized power-layout rules.
Do not approve an ordering-code substitution solely because both devices use a 48-QFN package. Compare the complete ordering tables, pin functions, temperature grade, qualification status, interface configuration, and exposed-pad requirements for VSC8531XMW-03 and the proposed replacement. A footprint match is necessary but does not by itself prove that a device is a production-safe drop-in replacement.
合規資訊
No definitive compliance declarations or AEC-Q100 qualification statement were identified for the exact ordering code. A cross-reference page mentions RoHS and REACH comparisons, but it does not establish the compliance status of VSC8531XMW-03.