Microchip Technology

VSC8531XMW-03 - 1G Ethernet PHY | Microchip | 48-QFN

MPN: VSC8531XMW-03 ✓ فعال
0.95 V and 2.38 V Vdss 48-pin QFN, 6 mm × 6 mm Package
حداقل سفارش: 1 |

VSC8531XMW-03 نمای کلی

The Microchip Technology VSC8531XMW-03 is a single-port copper Ethernet PHY supporting 10 Mbps, 100 Mbps, and 1 Gbps operation, with 0.95 V and 2.38 V operating rails, in a 48-pin 6 mm × 6 mm QFN package. It is designed for compact network equipment and provides IEEE 802.3az Energy Efficient Ethernet, Wake-on-LAN, SyncE, and RGMII/RMII interface support.

A copper Ethernet PHY is a physical-layer interface IC that converts digital data into signals suitable for twisted-pair cabling and converts received cable signals back into digital data. Within the network architecture, it sits between a MAC or Ethernet controller and a network transformer or integrated copper interface. The VSC8531 combines that physical-layer function with energy-management and clocking features intended to reduce power use and support synchronization in network systems.

The principal feature set includes one 10/100/1000BASE-T Ethernet channel, IEEE 802.3az EEE, Wake-on-LAN, synchronous Ethernet support, and broad LVCMOS I/O compatibility. These capabilities suit access equipment, industrial Ethernet endpoints, embedded gateways, and network infrastructure where board area is constrained. The 48-QFN package measures 6 mm on each side and includes an exposed pad according to the product description.

The device separates digital and analog supply domains, with the listing identifying 0.95 V and 2.38 V operating voltages. That arrangement allows a PHY to operate alongside modern digital logic while using a dedicated supply for its analog circuitry. Its RGMII and RMII options let the same PHY family address processors with different parallel Ethernet interfaces, while SyncE support benefits designs that require deterministic timing across the network.

Typical deployments include compact network switches, industrial controllers, telecom access equipment, and embedded communications systems. In these systems, the PHY connects a digital MAC or processor to the copper network medium, allowing standard 10/100/1000-Mbps Ethernet connectivity without requiring a larger discrete transceiver arrangement.

Designers should use the manufacturer datasheet pin-description table when assigning every signal, especially the exposed pad, clock interface, power rails, and high-speed copper-side connections. Layout should follow the manufacturer’s recommended decoupling and magnetics-coupling guidance, with controlled differential routing and short return paths on the copper Ethernet side.

This page organizes the verified product identity, interface capabilities, package details, sourcing information, drop-in alternatives, and engineering guidance into one procurement-oriented reference for engineers evaluating the VSC8531XMW-03.

جایگزین‌های drop-in برای VSC8531XMW-03 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای VSC8531XMW-03 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Product Type, MAC Interface, Number of Ports, Wake-on-LAN.

Microchip Technology
Package: 48-QFN, 6 mm x 6 mm, single-row
Product Type: Single-port Gigabit Ethernet copper PHY
MAC Interface: RGMII and RMII
مقایسه با VSC8531XMW-03 →
Microchip Technology
Package: 48-QFN (6 mm x 6 mm)
Product Type: Ethernet PHY (10/100/1000BASE-T)
MAC Interface: RGMII / RMII
مقایسه با VSC8531XMW-03 →

VSC8531XMW-05

✅ جایگزین مستقیم
Microchip Technology
📦 48-QFN (6 mm × 6 mm)
Ethernet PHY (10/100/1000BASE-T) · 1 · RGMII / RMII · 10/100/1000 Mbps · Copper (Cat 5e/6) · 3.3 V (single) · 1.0 V and 1.2 V LDO on-chip · -40 C to +85 C (Industrial)

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

VSC8531XMW

✅ جایگزین مستقیم
Microchip Technology
📦 48-QFN (6 mm × 6 mm)
Single-port Gigabit Ethernet copper PHY · 10/100/1000BASE-T · RGMII and RMII · 1 port · 48-QFN, 6 mm x 6 mm, single-row · Yes · RGMII version 2.0 standard timing compliant compensation · Eliminated by integrated RGMII timing compensation

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

VSC8531XMW-03 مشخصات

Product Type Single-port copper Ethernet PHY
Ethernet Data Rates 10 Mbps, 100 Mbps, and 1 Gbps
Number of Ports 1 port
Host Interface RGMII or RMII
Operating Voltage 0.95 V and 2.38 V
Energy Efficient Ethernet IEEE 802.3az supported
Wake-on-LAN Supported
Synchronous Ethernet SyncE supported
I/O Logic Compatibility LVCMOS
بسته‌بندی 48-pin QFN, 6 mm × 6 mm
Exposed Pad Present
نوع نصب Surface mount
Maximum Data Rate 1 Gbps
Carrier Type Copper Ethernet

راهنمای پیکربندی پین VSC8531XMW-03 48-pin qfn, 6 mm × 6 mm

پیکربندی پین برای VSC8531XMW-03 (پکیج 48-pin qfn, 6 mm × 6 mm). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 48-pin qfn, 6 mm × 6 mm برای VSC8531XMW-03

داده پین‌آوت تفصیلی موجود نیست برای VSC8531XMW-03.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

VSC8531XMW-03 مناسب است برای 6 کاربردs: Compact Network Switch, Industrial Ethernet Gateway, Telecom Access Equipment, Embedded Communications Controller, Wake-on-LAN Network Endpoint, Synchronized Ethernet Equipment.

🌐

Compact Network Switch

The VSC8531XMW-03 is well suited to a compact copper Ethernet switch because it provides one 10/100/1000-Mbps port in a 6 mm × 6 mm QFN package. RGMII or RMII connectivity allows the PHY to interface with a suitable switching controller, while SyncE support benefits equipment that needs deterministic timing. IEEE 802.3az Energy Efficient Ethernet can reduce power use on lightly loaded links. The main engineering consideration is routing the high-speed copper-side signals according to the manufacturer layout guidance and coupling them to the appropriate network transformer or magnetics arrangement.

🏭

Industrial Ethernet Gateway

The VSC8531XMW-03 can add 1 Gbps copper connectivity to an industrial gateway without the footprint of a larger multi-port transceiver. Its selectable RGMII or RMII host interface accommodates different embedded processors, and the broad LVCMOS support helps simplify digital integration. Wake-on-LAN is useful in equipment that must remain remotely accessible, while EEE can improve power efficiency when traffic is intermittent. Final industrial suitability depends on confirming the device’s specified operating-temperature and qualification requirements in the manufacturer documentation.

🌐

Telecom Access Equipment

The VSC8531XMW-03 targets space-constrained telecom access equipment requiring one copper Ethernet data rate option from 10 Mbps through 1 Gbps. Its small 48-QFN package preserves board area for line-card processing and interface circuitry, while SyncE provides a synchronization-oriented option for systems with timing requirements. The exposed-pad package also demands careful thermal and return-path layout. Use the manufacturer’s reference layout and power-supply recommendations to preserve signal integrity between the PHY, magnetics, and copper network connection.

🔧

Embedded Communications Controller

The VSC8531XMW-03 provides a dedicated physical-layer endpoint for embedded processors that lack an integrated copper Ethernet transceiver. RMII can reduce host-side pin requirements in cost-sensitive designs, while RGMII offers a higher-bandwidth parallel interface when the processor supports it. Operating rails of 0.95 V and 2.38 V permit integration with modern digital and analog supply domains. The design should include separate decoupling close to the device and carefully controlled clock and data routing to maintain interface timing and signal integrity.

🧩

Wake-on-LAN Network Endpoint

The VSC8531XMW-03 supports Wake-on-LAN, making it applicable to network endpoints that must be remotely awakened for maintenance, imaging, or telemetry collection. Combining this function with IEEE 802.3az EEE allows a system to retain remote-access behavior while reducing power consumption during periods of low link activity. The one-port architecture is appropriate for embedded appliances and controllers with a single copper uplink. Firmware, network-infrastructure support, and low-power behavior must be validated as a complete system rather than inferred from the PHY feature set alone.

🖥️

Synchronized Ethernet Equipment

The VSC8531XMW-03 is suitable for network equipment that requires synchronous Ethernet capability alongside a compact 1 Gbps copper interface. SyncE can support networks in which timing information is distributed through Ethernet infrastructure, while the RGMII and RMII options provide flexibility for different controller architectures. The PHY’s 6 mm × 6 mm package helps reduce board area in line cards and access equipment. Clock-source topology, jitter performance, reset sequencing, and magnetics selection must be designed according to the manufacturer’s application guidance.

What is the VSC8531XMW-03?
The VSC8531XMW-03 is a Microchip Technology single-port copper Ethernet PHY supporting 10 Mbps, 100 Mbps, and 1 Gbps operation. According to the Microchip VSC8531 product page, the device includes IEEE 802.3az Energy Efficient Ethernet, Wake-on-LAN, SyncE, broad LVCMOS I/O support, and RGMII/RMII connectivity in a 6 mm × 6 mm QFN package.
What are the key specifications of VSC8531XMW-03 that engineers should know?
The VSC8531XMW-03 provides one copper Ethernet channel at 10 Mbps, 100 Mbps, or 1 Gbps, with 0.95 V and 2.38 V operating rails. The Microchip product description identifies IEEE 802.3az EEE, Wake-on-LAN, synchronous Ethernet, RGMII/RMII interfaces, and wide LVCMOS support. It is packaged in a 48-QFN measuring 6 mm × 6 mm with an exposed pad.
What is the operating voltage of VSC8531XMW-03?
The VSC8531XMW-03 operates at 0.95 V and 2.38 V. These two operating rails reflect the separation commonly required between low-voltage digital interfaces and the PHY’s analog supply domain. Use the manufacturer’s power-supply, decoupling, and sequencing instructions from the VSC8531 datasheet when connecting the rails and exposed thermal pad.
Which Ethernet speeds does VSC8531XMW-03 support?
The VSC8531XMW-03 supports 10 Mbps, 100 Mbps, and 1 Gbps Ethernet operation on one copper port. The product listing identifies the device as a one-channel Ethernet PHY, while the Microchip product page describes it as a low-power copper PHY for space-constrained designs. Its RGMII and RMII host interfaces support different digital Ethernet-controller architectures.
Where can I download the VSC8531XMW datasheet?
The official VSC8531 documentation is available from the Microchip product page at https://www.microchip.com/en-us/product/VSC8531. A separate datasheet view is also listed through Octopart. For implementation, use the manufacturer document because it defines the authoritative electrical limits, pin functions, exposed-pad connection, interface timing, and recommended layout.
Where can I find the VSC8531XMW-03 pinout?
The VSC8531XMW-03 uses a 48-pin QFN package, and its complete pin assignments are defined in the manufacturer’s VSC8531 datasheet rather than the distributor summaries. Assign PCB tracks using the pin-description table and land pattern in that document. Treat the exposed pad as a separate connection and follow Microchip’s grounding and thermal-layout instructions.
Does VSC8531XMW-03 support Energy Efficient Ethernet and Wake-on-LAN?
Yes, the VSC8531XMW-03 supports IEEE 802.3az Energy Efficient Ethernet and Wake-on-LAN. The Microchip product page identifies both capabilities as core features of the VSC8531 family. EEE can reduce copper-port power consumption during low-traffic periods, while Wake-on-LAN supports remote activation through compatible network infrastructure.
When should I choose the VSC8531XMW-03 over another single-port Ethernet PHY?
Choose the VSC8531XMW-03 when the design needs a compact 1 Gbps copper PHY with both RGMII and RMII support, IEEE 802.3az EEE, Wake-on-LAN, and SyncE. Its 48-QFN package is appropriate for space-constrained equipment, while the wide LVCMOS compatibility simplifies connections to processors using conventional CMOS I/O levels.
Is VSC8531XMW-03 suitable for industrial Ethernet equipment?
The VSC8531XMW-03 is functionally suitable for compact Ethernet equipment requiring 10/100/1000-Mbps copper connectivity, EEE, and flexible host-interface selection. Final suitability for industrial environments depends on the device’s specified operating-temperature range and qualification status, which should be confirmed in the manufacturer datasheet before release.
What is the difference between VSC8531XMW and VSC8531XMW-03?
Both identifiers belong to the Microchip VSC8531 family, and the -03 suffix identifies the specific ordered configuration. The available product records identify the family as a 48-QFN single-port copper PHY with RGMII/RMII, EEE, WoL, and SyncE. Confirm the exact ordering-code distinctions and temperature grade in the manufacturer ordering information before substitution.
What is the difference between VSC8531XMW-03 and VSC8531XMW-05?
The VSC8531XMW-03 and VSC8531XMW-05 are ordering variants in the same VSC8531 series, and both are listed in 48-QFN packages. Their published product summaries identify the same copper Ethernet PHY family and host-interface capabilities, but the suffix represents an ordering-code difference that may affect grade or qualification. Verify the exact suffix meaning and temperature specification before interchange.
Can VSC8531XMW-05 replace VSC8531XMW-03?
The VSC8531XMW-05 is a same-series, same-package candidate for review, but substitution should not be approved solely from the shared VSC8531 name. Compare the complete manufacturer ordering tables, temperature range, qualification status, and exposed-pad requirements for both suffixes. The listed summaries establish the shared 48-QFN format but do not expose every suffix-specific parameter.
What is the best drop-in replacement for VSC8531XMW-03?
The VSC8531XMW-05 is the closest same-package replacement candidate identified for the VSC8531XMW-03, while VSC8531XMW represents the corresponding base-family ordering configuration. A true drop-in decision still requires confirmation of every pin, supply rail, interface mode, temperature grade, and qualification requirement against the manufacturer datasheets before PCB substitution.
What can replace VSC8531XMW-03?
The VSC8531XMW-05 is the principal same-family replacement candidate identified for the VSC8531XMW-03 because both use the 48-QFN format. It should be treated as a conditional drop-in until the manufacturer ordering information confirms compatible pinout, temperature range, qualification, and operating conditions. Do not assume that matching package dimensions alone guarantees functional equivalence.
Where can I buy VSC8531XMW-03 and check its lead time?
Use the Request a Quote form on this page to request the VSC8531XMW-03, current lead time, stock status, and package quantity. The manufacturer product page identifies the device as a low-power, small-form-factor copper PHY, while distributor records identify the exact 48-QFN ordering code. The commercial team can confirm sourcing without relying on a static price.
Is VSC8531XMW-03 in stock?
Current stock for the exact VSC8531XMW-03 should be confirmed through the Request a Quote form on this page. The product is listed by Microchip Technology as a 48-QFN Ethernet PHY, and distributor search results show the exact ordering code, but those records do not establish a dependable inventory commitment. Submit the required quantity and packaging details for a current allocation response.

داده‌های مرجع مهندسی برای VSC8531XMW-03 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the VSC8531XMW-03 for a space-constrained design requiring a single 10/100/1000-Mbps copper Ethernet port, RGMII or RMII host connectivity, EEE, Wake-on-LAN, and SyncE. Select VSC8531XMW-05 when its specific ordering, temperature, or qualification configuration matches the production requirement better, but verify the manufacturer ordering table before treating it as a drop-in replacement. Select VSC8531XMW for the base ordering configuration when the suffix-specific requirements permit it. All three identifiers belong to the same Microchip VSC8531 family and use the 48-QFN format, making them the most practical same-package candidates for review. Do not select them solely on package dimensions: confirm pin functions, supply requirements, temperature grade, qualification, exposed-pad treatment, and interface configuration before approving a substitution.

مقایسه با جایگزین‌ها

پارامتر این محصول VSC8531XMW-05 VSC8531XMW
Package 48-QFN (6 mm × 6 mm) 48-QFN (6 mm × 6 mm) 48-QFN (6 mm × 6 mm)
Brand Microchip Technology Microchip Technology Microchip Technology
Product Series VSC8531 VSC8531 VSC8531
Ethernet Port Count 1 port 1 port 1 port
Maximum Data Rate 1 Gbps 1 Gbps 1 Gbps
Host Interface RGMII or RMII RGMII or RMII RGMII or RMII
Energy Efficient Ethernet IEEE 802.3az supported IEEE 802.3az supported IEEE 802.3az supported
Wake-on-LAN Supported Supported Supported
Synchronous Ethernet SyncE supported SyncE supported SyncE supported

تفاوت‌های کلیدی

  • Compact single-port integration (در مقابلVSC8531XMW)
  • Flexible host connectivity (در مقابلVSC8531XMW-05)
  • Network power-management feature set (در مقابلVSC8531XMW)

یادداشت‌های طراحی

Follow the manufacturer’s reference layout for the 48-QFN footprint and exposed pad. Place power-decoupling capacitors close to their associated supply pins, provide an uninterrupted ground reference beneath the device, and connect the exposed pad according to the datasheet. Avoid placing disruptive switching nodes or high-current return paths beneath the PHY, because both can degrade copper-side signal integrity.

Use controlled-impedance, tightly coupled differential routing for the copper Ethernet side and keep the PHY-to-magnetics path short. Follow the manufacturer’s interface timing layout for RGMII or RMII clock and data lines, and confirm the selected interface mode before layout release. Incorrect clock topology, unmatched pair geometry, or excessive trace length can cause data errors even when the nominal data-rate setting is correct.

Design the 0.95 V and 2.38 V rails independently and verify their sequencing, noise, and load-current requirements against the manufacturer datasheet. Use dedicated filtering for the analog supply domain and place the associated capacitors close to the PHY pins. The exact capacitor values and stability requirements must be taken from the recommended application circuit rather than generalized power-layout rules.

Do not approve an ordering-code substitution solely because both devices use a 48-QFN package. Compare the complete ordering tables, pin functions, temperature grade, qualification status, interface configuration, and exposed-pad requirements for VSC8531XMW-03 and the proposed replacement. A footprint match is necessary but does not by itself prove that a device is a production-safe drop-in replacement.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

No definitive compliance declarations or AEC-Q100 qualification statement were identified for the exact ordering code. A cross-reference page mentions RoHS and REACH comparisons, but it does not establish the compliance status of VSC8531XMW-03.

تاریخ تأیید داده‌ها: 2026-11-16 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

vsc8531xmw 05 datasheet VSC8531XMW-03 datasheet VSC8531XMW-03 datasheet pdf VSC8531XMW-03 pinout VSC8531XMW-03 equivalent VSC8531XMW-03 replacement VSC8531XMW-03 cross reference VSC8531XMW-03 vs VSC8531XMW-05 VSC8531XMW-03 footprint VSC8531XMW-03 price VSC8531XMW-03 stock Microchip VSC8531XMW-03 VSC8531XMW 48 QFN pinout VSC8531XMW application circuit

قطعات و اصطلاحات مرتبط

Microchip Technology VSC8531XMW-03 VSC8531XMW-05 VSC8531XMW VSC8531 Ethernet PHY physical-layer interface copper Ethernet single-port Ethernet 10BASE-T 100BASE-TX 1000BASE-T RGMII RMII IEEE 802.3az Energy Efficient Ethernet Wake-on-LAN Synchronous Ethernet SyncE LVCMOS 48-QFN QFN package family surface-mount technology embedded pad industrial Ethernet
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ