WM8510GEDS/RV - Mono 24-Bit Audio Codec | Cirrus Logic
MPN: WM8510GEDS/RV ✗ 停產WM8510GEDS/RV 概覽
An audio codec is an interface IC that converts digital audio data into an analog output and, where supported, manages the electrical interface to an audio transducer. The WM8510 belongs to the broader codec, audio interface, signal-conversion, and semiconductor hierarchy. Integrating a mono codec and speaker driver into one package reduces the component count in portable equipment while keeping the analog output path close to the digital audio source.
The WM8510GEDS/RV provides a 24-bit serial audio path, mono signal processing, and an integrated speaker-driver function in a 28-SSOP package. Its 2.5 V to 3.6 V supply range is suitable for low-voltage portable systems, while its surface-mount SSOP construction supports automated assembly. The manufacturer identifies the part as RoHS compliant, supporting use in modern electronics manufacturing where restricted-substance requirements apply to the bill of materials.
The codec uses a sigma-delta architecture, a design commonly used to implement high-resolution audio conversion with integrated digital filtering. Serial audio data is transferred through a compact digital interface before being converted for the analog audio output. The integrated speaker driver allows the device to serve as the central audio-output block in products where a dedicated external speaker amplifier would add cost, board area, or complexity. Exact clock, conversion-rate, output-level, and speaker-load limits should be confirmed in the manufacturer datasheet before final circuit design.
Typical applications include portable media players, personal audio equipment, compact consumer appliances, voice-accessory systems, and other products with a mono audio-speaker requirement. Its 28-pin SSOP package is especially relevant where the available PCB area is limited but a through-hole solution would be undesirable. The -40 °C to +85 °C range covers industrial-temperature consumer and embedded product environments when all associated system requirements are met.
Designers should confirm the supported sample rate, master-clock requirement, digital audio format, speaker impedance, power-supply sequencing, and decoupling network against the manufacturer datasheet. PCB layout should keep analog output and speaker-driver connections away from digital clock and data traces, while preserving a direct ground-return path from the device to its supply system. This page combines package, interface, environmental, and application details with replacement guidance and practical design considerations.
直接替換替代品,適用於 WM8510GEDS/RV — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: WM8510GEDS/RV (相同外形與佔位) — 差異在於 Operating Temperature Range.
WM8510GEDS/V
✅ 直接替換聯絡詢價
查看資料表 →WM8510GEFL/RV
✅ 直接替換📋 參考替代品(不在目錄中)
WM8510GEDS/RV 最大額定值與電氣特性
| Product Type | Mono audio codec with integrated speaker driver |
| Audio Interface Resolution | 24 bit |
| 介面類型 | Serial audio interface |
| Channel Configuration | Mono |
| Architecture | Sigma-delta |
| Supply Voltage Range | 2.5 V to 3.6 V |
| 工作溫度範圍 | -40 °C to +85 °C |
| 封裝 | 28-pin SSOP |
| 安裝類型 | Surface mount |
| RoHS 狀態 | Compliant |
| Number of Audio Channels | 1 channel |
| Speaker Driver | Integrated |
WM8510GEDS/RV 28-pin ssop 腳位配置指南
WM8510GEDS/RV(28-pin ssop 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: WM8510GEDS/RV.
請參閱 資料表 以查看完整腳位配置。
典型應用
WM8510GEDS/RV 適用於 6 應用s: Portable Media Player Audio, Personal Audio Speaker, Voice Accessory, Compact Consumer Appliance, Industrial Audio Control Terminal, IoT Feedback Device.
Portable Media Player Audio
The WM8510GEDS/RV fits portable media-player designs that need one audio channel rather than a multi-channel codec. Its 24-bit serial interface provides a digital-audio connection to a host processor, while the integrated speaker driver consolidates the mono output stage in a 28-pin SSOP. The 2.5 V to 3.6 V supply range aligns with many low-voltage portable platforms. Before layout release, verify the host’s clocking format, required sample rate, speaker impedance, and startup sequence against the manufacturer datasheet.
推薦
Personal Audio Speaker
A personal-audio product can use the WM8510GEDS/RV as its mono digital-to-analog and speaker-output block. Integrating the codec and speaker driver reduces the number of external audio-path components compared with a discrete converter and output stage. The 28-pin SSOP is useful where a small PCB footprint is required, although it is larger than the smallest QFN alternatives. Confirm the permitted speaker load, maximum output level, and thermal behavior for the selected 2.5 V to 3.6 V operating point before finalizing the enclosure and speaker choice.
推薦
Voice Accessory
The WM8510GEDS/RV can serve as the playback path in a compact voice accessory or personal audio accessory that accepts digital audio from a host and drives a single speaker. Its mono architecture matches the typical one-speaker enclosure, while the integrated driver simplifies the analog output section. A controller such as the STM8S103 family can manage buttons, status indications, and serial-audio control. The design must verify signal latency, supported master clock, wake-up behavior, and speaker compatibility rather than assuming that every mono codec interface is interchangeable.
推薦
Compact Consumer Appliance
In a compact household appliance with a status speaker, the WM8510GEDS/RV provides a focused mono audio-output solution without requiring a stereo codec. The serial 24-bit interface connects to a control processor, and the integrated speaker driver reduces the external analog component count. Its -40 °C to +85 °C operating range supports a broad range of product environments. Engineers should account for the SSOP footprint, verify the supported supply range during power transitions, and confirm whether the acoustic output requires filtering or additional amplification beyond the integrated driver.
推薦
Industrial Audio Control Terminal
The WM8510GEDS/RV can be used in an industrial audio terminal that requires a mono confirmation speaker, voice prompt, or status annunciator. Its -40 °C to +85 °C specification range covers industrial-temperature applications, while the integrated speaker driver consolidates the audio output function. An STM8 or ATXMEGA controller can handle command processing and audio-format configuration. The terminal designer should still validate electromagnetic robustness, speaker grounding, enclosure acoustics, and supply behavior under industrial transients using the manufacturer’s application and layout guidance.
推薦
IoT Feedback Device
The WM8510GEDS/RV can provide audible feedback in an IoT appliance that requires a simple confirmation tone or voice prompt from a single speaker. The 24-bit serial audio interface allows digital audio to be generated by a host processor, and the integrated driver reduces the component count for a compact feedback path. An ATXMEGA or STM8 controller can trigger prompts while managing connectivity. Before implementation, confirm that the host can provide the required serial format and clock, and check the speaker load against the datasheet’s electrical limits.
推薦
推薦產品摘要
工程參考資料,適用於 WM8510GEDS/RV — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | WM8510GEDS/V | WM8510GEFL/RV |
|---|---|---|---|
| Brand | Cirrus Logic Inc. | Cirrus Logic Inc. | Cirrus Logic Inc. |
| Package | 28-SSOP | 28-SSOP | 28-SSOP |
| Product Type | Mono codec with speaker driver | Mono codec with speaker driver | WM8510-series audio codec |
主要差異化特點
- Combines mono conversion and speaker output (對比WM8510GEFL/RV)
- Documented 24-bit serial interface (對比WM8510GEFL/RV)
- Low-voltage operating range (對比WM8510GEDS/V)
設計說明
Assign every net from the manufacturer’s WM8510GEDS/RV pin-description table rather than from the mechanical outline. The indexed product information confirms a 28-SSOP package but does not reproduce terminal names, so schematic capture should begin with the datasheet pin table. Keep the serial clock and data traces away from the analog output and speaker-driver nets, and preserve the manufacturer’s recommended component placement around the codec.
Use only the supply rails and decoupling arrangement specified for the 2.5 V to 3.6 V operating range. Place each required bypass capacitor close to its intended supply pin, with a short and low-impedance return to the device ground. Verify startup and shutdown behavior, especially where the speaker can produce transient load, before connecting a host processor that controls codec power sequencing.
Do not select the integrated speaker driver without checking the connected speaker’s impedance, power rating, and DC resistance against the manufacturer’s limits. A speaker outside the operating region can load the output stage excessively even if the logic supply remains within range. Confirm the master clock, serial-audio format, supported sample rate, and output configuration in the datasheet before PCB release.
Route the analog output and speaker connections as a compact output channel, and provide a direct return path for speaker current that does not share long segments with sensitive analog ground paths. This reduces potential ground-potential differences and radiated audio-channel noise. Where a connector or speaker is physically distant from the IC, assess the complete analog path and include the required output filtering in the board design.
合規資訊
The exact WM8510GEDS/RV listing identifies the component as RoHS compliant. No manufacturer statement establishing REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified.