WM8510GEDS/V - 24-Bit Mono Audio Codec | Cirrus Logic
MPN: WM8510GEDS/V ✗ 停產WM8510GEDS/V 概覽
An audio codec is an interface IC that converts digital audio data into an analog signal and manages the associated input, output, filtering, and gain functions. The WM8510GEDS/V belongs to the mono-codec family within the broader audio IC hierarchy, combining a digital audio interface, analog conversion functions, and speaker-drive capability. This integration is especially useful in compact voice terminals where board area, power consumption, and external component count are important design constraints.
The WM8510GEDS/V uses a 24-bit serial interface and provides a mono codec with a speaker driver. Its -40°C to +85°C operating-temperature range supports industrial, communications, and temperature-controlled consumer equipment. The low-power design is intended for portable and always-connected voice products, while the integrated speaker driver can reduce the footprint required for a basic voice-output stage compared with a codec that requires a separate output amplifier.
The device is intended primarily for VoIP telephones, digital telephones, and related voice-communication terminals. In these systems, the digital audio processor receives voice data through its serial interface, processes and converts the signal, and provides an analog output suitable for driving an audio transducer through the integrated speaker-driver section. This integration can simplify signal routing and reduce component count compared with a discrete codec-and-amplifier implementation.
The 28-pin SSOP package provides a practical option for compact, cost-sensitive voice products. Because it is a relatively small-outline package, careful PCB layout is needed to provide adequate copper for power delivery and thermal dissipation. Decoupling capacitors should be placed close to the supply and ground pins, while output and interface routing should be kept separate from sensitive analog sections where practical.
Designers should confirm the exact clocking, digital-interface voltage, analog supply arrangement, output-load limits, and external-component requirements in the manufacturer datasheet before releasing a PCB. The device is listed as obsolete, so new production designs should include a documented lifecycle review and an approved sourcing or redesign plan rather than assuming long-term availability.
This product page combines the verified device identity, package information, lifecycle status, technical-search references, and practical integration considerations in one engineering-focused summary. It also separates true drop-in candidates from parts that are merely functionally similar, helping designers make a safer replacement decision.
直接替換替代品,適用於 WM8510GEDS/V — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: WM8510GEDS/V (相同外形與佔位) — 差異在於 Operating Temperature Range.
WM8510GEDS/RV
✅ 直接替換聯絡詢價
查看資料表 →WM8510GEDS/V 最大額定值與電氣特性
| Device Type | Mono audio codec with speaker driver |
| Serial Audio Interface | 24-bit serial |
| Number of Audio Channels | 1 channel |
| Output Stage | Integrated speaker driver |
| 封裝 | 28-pin SSOP |
| 安裝類型 | Surface mount |
| 工作溫度範圍 | -40°C to +85°C |
| Primary Application | Voice over Internet Protocol equipment |
| Secondary Application | Digital telephones |
| Power Class | Low-power device |
| Audio Quality Class | High-quality mono audio |
| RoHS 狀態 | Compliant |
| REACH Status | REACH unaffected |
| Moisture Sensitivity Level | MSL 3, 168 hours |
| ECCN | EAR99 |
WM8510GEDS/V 28-pin ssop 腳位配置指南
WM8510GEDS/V(28-pin ssop 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: WM8510GEDS/V.
請參閱 資料表 以查看完整腳位配置。
典型應用
WM8510GEDS/V 適用於 6 應用s: VoIP Telephone Handset, Digital Telephony Terminal, Industrial Intercom Endpoint, Compact Voice Recorder, Network Voice Access Terminal, Temperature-Controlled Communications Equipment.
VoIP Telephone Handset
The WM8510GEDS/V fits a compact VoIP handset because it combines a 24-bit serial mono-codec path with an integrated speaker driver for voice playback. The manufacturer identifies VoIP equipment as a primary application, so the architecture matches the needs of a single-channel telephony endpoint rather than a full multimedia audio system. Its low-power design is useful in handsets that remain connected to network power or operate intermittently, while the -40°C to +85°C range supports temperature-controlled industrial desk phones. During design-in, verify clocking, microphone and speaker signal levels, output loading, and the exact pin assignments in the 28-pin SSOP footprint.
推薦
Digital Telephony Terminal
The WM8510GEDS/V is directly suited to digital telephones because the manufacturer lists digital telephones as a target use for this low-power mono codec. The 24-bit serial interface provides a defined digital-audio path, while the integrated speaker driver reduces the component count needed for a basic voice-output stage. This is beneficial in compact desk phones, SIP terminals, and voice-access products where only one conversational audio channel is required. Before layout release, confirm the supported sample rate, interface voltage, microphone configuration, speaker impedance, and any application-specific bypass or filtering requirements.
推薦
Industrial Intercom Endpoint
The WM8510GEDS/V can serve as the mono voice-audio codec in an industrial intercom or call-box endpoint when one-way or conversational audio is sufficient. Its stated operating range of -40°C to +85°C allows operation across widely separated indoor and temperature-controlled industrial environments, and the integrated speaker driver can simplify the output stage. The low-power architecture is advantageous in powered or network-connected endpoints. Engineering validation should include speaker loading, acoustic feedback margins, line-level microphone interfacing, surge exposure at the enclosure boundary, and thermal verification for the selected SSOP layout.
推薦
Compact Voice Recorder
The WM8510GEDS/V is applicable to a compact one-channel voice recorder because it combines digital audio processing, analog conversion, and a mono speaker-drive function in one 28-pin SSOP device. The 24-bit serial interface allows a system controller to capture or reproduce voice data while the integrated output section supports local monitoring. Its low-power construction suits portable instruments where board area is constrained. Designers should confirm whether the microphone path, automatic gain-control behavior, sample-rate support, and output topology meet the recording specification before selecting this obsolete codec for a new platform.
推薦
Network Voice Access Terminal
The WM8510GEDS/V can be used in a network voice-access terminal that requires a mono audio path, digital voice-data transfer, and local speaker playback. The 24-bit serial interface supports integration with a communications processor, while the integrated speaker driver reduces the number of discrete output components. This arrangement is well suited to compact access panels, desk accessories, and single-user voice endpoints. Check the manufacturer timing diagrams and electrical characteristics for the system clock, serial format, digital input levels, analog biasing, and supply sequencing. The obsolete lifecycle status requires an explicit availability plan before new deployment.
推薦
Temperature-Controlled Communications Equipment
The WM8510GEDS/V is suitable for communications equipment operating across its stated -40°C to +85°C temperature range. A mono codec with integrated speaker drive is useful in control-room phones, industrial paging endpoints, and specialized voice panels where one audio channel satisfies the requirement and low power is desirable. The 28-pin SSOP package supports compact board layouts, although adequate decoupling and copper access remain necessary. Because the part is obsolete, use should be limited to designs with a controlled supply plan, an approved alternate, or an existing-platform maintenance requirement.
推薦
推薦產品摘要
工程參考資料,適用於 WM8510GEDS/V — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | WM8510GEDS/RV |
|---|---|---|
| Brand | Wolfson Microelectronics plc | Wolfson Microelectronics plc |
| Package | 28-pin SSOP | 28-pin SSOP - same package |
| Device Type | Mono codec with speaker driver | Mono codec with speaker driver |
| Serial Interface | 24-bit serial | 24-bit serial |
| Number of Audio Channels | 1 mono channel | 1 mono channel |
| Integrated Speaker Driver | Yes | Yes |
| Target Applications | VoIP equipment and digital telephones | VoIP mono codec |
主要差異化特點
- Closest identified same-footprint replacement (對比WM8510GEDS/RV)
- Integrated voice-output stage (對比Generic external-amplifier design)
- Purpose-built serial voice interface (對比Discrete audio path implementation)
設計說明
Place the required input, output, and reference decoupling capacitors directly beside their associated WM8510GEDS/V pins, using the exact values and connection points in the manufacturer datasheet. Keep the SSOP power and ground paths short, and provide a low-impedance ground return beneath or adjacent to the device. The 28-pin SSOP has limited thermal and electrical contact area, so pad geometry and via placement should be reviewed as part of the complete land-pattern design.
Separate the digital serial interface from the analog microphone and speaker paths when routing the PCB. Use a continuous ground reference for both domains, avoid routing clock and data lines beneath sensitive analog inputs, and keep the speaker output away from microphone and reference nodes. Confirm the exact pin functions in the package drawing because the complete pin descriptions were not included in the cited search record.
Do not treat a functionally similar mono codec as a drop-in replacement merely because it uses a comparable package. WM8510GEDS/RV is the only same-package candidate identified in the cross-reference results, and its ordering suffix should still be checked against the manufacturer part-number scheme. For new designs, account for the obsolete lifecycle status by defining a second source, an approved last-time-buy quantity, or a planned PCB redesign before production release.
合規資訊
The product listing identifies RoHS compliance and REACH-unaffected status. No qualifying automotive-grade designation, lead-free statement, halogen-free statement, or conflict-minerals declaration was identified for the exact MPN.