WM8731CSEFL/R - 24-Bit Stereo Audio Codec | Cirrus Logic
MPN: WM8731CSEFL/R ✗ 停產WM8731CSEFL/R 概覽
A stereo audio codec is a mixed-signal interface IC that converts analog microphone or line-level signals into digital PCM audio and reconstructs digital audio into an analog headphone output. In the product hierarchy, the WM8731 belongs to the audio codec class, interface IC family, and power-management-adjacent signal-chain category. Its integrated headphone driver reduces the need for separate output amplification in portable audio products.
The WM8731CSEFL/R provides 24-bit conversion resolution, a 24-bit serial interface, programmable sample-rate operation, and a 28-QFN 5 mm by 5 mm package. The 2.7 V minimum operating voltage suits low-voltage portable systems, while the 3.6 V maximum operating voltage defines the upper end of its specified analog supply range. Programmable sampling enables the host processor to select the digital audio rate required by its playback or recording path.
This codec architecture places microphone or stereo line inputs, sigma-delta conversion stages, digital filtering, volume control, and headphone-drive functions into a single package. Digital control is performed through a serial interface, allowing a host processor to configure conversion, playback, and input parameters. The 28-QFN footprint is compact, but its exposed thermal and electrical requirements must be handled with careful PCB layout and stable supply bypassing.
Typical uses include portable Internet audio devices, digital music players, portable recorders, communications equipment, and compact embedded audio systems. In a portable player, the codec can accept line or microphone inputs and drive stereo headphones while the host exchanges PCM audio over the serial bus. In a recording product, the same device can support stereo capture and headphone monitoring while avoiding a separate monitor-output converter.
Place the device close to the analog audio connectors and keep digital return paths away from microphone and line inputs. Follow the manufacturer datasheet for decoupling, exposed-pad connection, analog grounding, and supported interface modes. Correct layout is particularly important because mixed-signal codecs combine high-gain analog inputs with fast serial control and clock signals on the same compact package.
This product page consolidates the exact orderable MPN, package information, interface classification, supply limits, and verified replacement findings. It also provides application guidance, comparison fields, and design cautions that help engineers evaluate the codec before beginning schematic capture, PCB layout, or firmware integration.
直接替換替代品,適用於 WM8731CSEFL/R — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此產品無可直接替換的替代品。
申請替代品WM8731CSEFL/R 最大額定值與電氣特性
| Product Type | Stereo audio codec with headphone driver |
| Converter Resolution | 24 bit |
| Serial Audio Interface Resolution | 24 bit |
| Minimum Analog Supply Voltage | 2.7 V |
| Maximum Analog Supply Voltage | 3.6 V |
| Operating Supply Voltage Range | 2.7 V to 3.6 V |
| Sample Rate | Programmable |
| Package Type | 28-QFN |
| Package Dimensions | 5 mm x 5 mm |
| 安裝類型 | Surface Mount |
| Audio Channel Configuration | Stereo |
| Headphone Output | Integrated headphone driver |
| Analog Input Support | Microphone and line-level inputs |
WM8731CSEFL/R 5 mm x 5 mm 腳位配置指南
WM8731CSEFL/R(5 mm x 5 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: WM8731CSEFL/R.
請參閱 資料表 以查看完整腳位配置。
典型應用
WM8731CSEFL/R 適用於 6 應用s: Portable Internet Audio Device, Digital Music Player, Portable Stereo Recorder, Communication and Conferencing Equipment, Industrial Audio Control Panel, Embedded Audio Test and Measurement.
Portable Internet Audio Device
The WM8731CSEFL/R fits portable Internet audio equipment because it combines a 24-bit stereo codec, programmable sample rates, and an integrated headphone driver in a 28-QFN 5 mm by 5 mm package. Its 2.7 V to 3.6 V analog operating range supports low-voltage portable products where board area is limited. A host processor can configure the codec, exchange digital audio data, and drive stereo headphones without requiring a separate headphone-output amplifier. The principal design consideration is separating the sensitive analog input and headphone-output paths from the serial digital interface while maintaining short, stable supply connections around the compact QFN footprint.
推薦
Digital Music Player
A digital music player can use the WM8731CSEFL/R as the central audio interface for 24-bit playback and headphone output. Programmable sample rates allow the application processor to select an appropriate digital audio rate, while the integrated headphone driver reduces the component count needed beside the codec. The 5 mm by 5 mm 28-QFN package is useful in compact portable media products, and the specified 2.7 V to 3.6 V supply range supports low-voltage system architectures. Designers should verify the required digital supply, audio clocking scheme, output impedance, and bypass-capacitor arrangement against the manufacturer datasheet before finalizing the schematic and PCB.
推薦
Portable Stereo Recorder
The WM8731CSEFL/R suits portable stereo recording equipment that needs microphone or line-level capture, 24-bit conversion, and headphone monitoring. The stereo codec architecture can support two analog recording paths while providing digital PCM data to a host processor. Its integrated headphone driver enables monitoring without adding a separate output stage in space-constrained products. The 2.7 V to 3.6 V operating range fits many portable platforms, but analog input gain, microphone bias, input impedance, clock accuracy, and digital-output format must be confirmed. PCB layout should keep analog connectors and input traces away from serial control and clock signals.
推薦
Communication and Conferencing Equipment
The WM8731CSEFL/R can serve compact communications equipment requiring a stereo audio interface and local headphone monitoring. A host processor can configure the 24-bit codec, route capture or playback data through the serial interface, and use programmable sample rates to match the communications pipeline. The integrated headphone driver helps produce a local monitoring output without an additional amplifier in a space-constrained design. Operation from a 2.7 V to 3.6 V supply supports portable and embedded systems. Practical implementation requires checking microphone or line-input requirements, echo-control partitioning, clocking, and whether the system needs full-duplex headroom for simultaneous recording and playback.
推薦
Industrial Audio Control Panel
The WM8731CSEFL/R can be used in a compact industrial audio panel that plays status tones, voice prompts, or local monitoring audio through headphones or a small speaker network. Its 24-bit stereo conversion and programmable sample rates provide a flexible digital audio endpoint controlled by an embedded processor. The 28-QFN 5 mm by 5 mm package limits board area, while the specified 2.7 V to 3.6 V analog supply can suit embedded equipment built around low-voltage rails. Industrial implementation should account for EMI from relays and switching converters, maintain clean analog grounding, and verify that the available output power and load impedance meet the system requirement.
推薦
Embedded Audio Test and Measurement
The WM8731CSEFL/R is suitable for compact test equipment that needs a programmable stereo audio input and headphone-monitor output. The 24-bit conversion and programmable sampling support repeatable digital capture or playback, while the integrated headphone driver provides a convenient monitoring stage. Its 5 mm by 5 mm 28-QFN package allows the converter to be placed close to input and output connectors, reducing sensitive analog trace lengths. The 2.7 V to 3.6 V supply range fits embedded test systems. For laboratory accuracy, engineers should evaluate reference-clock jitter, input bandwidth, clock synchronization, grounding, and the complete signal chain rather than relying on converter resolution alone.
推薦
推薦產品摘要
工程參考資料,適用於 WM8731CSEFL/R — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Package | 28-QFN (5 mm x 5 mm) |
| Brand | Cirrus Logic |
| Product Type | Stereo audio codec with headphone driver |
| Converter Resolution | 24 bit |
| Minimum Supply Voltage | 2.7 V |
| Maximum Supply Voltage | 3.6 V |
| Sample Rate | Programmable |
| Headphone Driver | Integrated |
| Mounting Type | Surface Mount |
| Orderable MPN | WM8731CSEFL/R |
主要差異化特點
- Combines 24-bit conversion with an integrated headphone driver (對比WM8731CLSEFL/R)
- Uses the exact 28-QFN 5 mm by 5 mm production configuration (對比WM8731SEDS/V)
- Supports programmable sample rates for host-controlled audio paths (對比WM8731CSEFL)
設計說明
Place the WM8731CSEFL/R close to the audio connectors and route microphone or line inputs directly to the assigned pins with minimal trace length. Keep the serial audio, control, and clock traces away from the analog input region, especially around the exposed pad and supply connections. Use a continuous analog ground reference beneath the codec where the manufacturer layout guidance permits, and connect the exposed pad to the specified ground plane with adequate thermal and electrical vias.
Decouple each supply rail at the WM8731CSEFL/R with the capacitance and placement specified in the manufacturer datasheet. The analog operating range is 2.7 V to 3.6 V, so verify startup, load transients, and host rail tolerance across the complete operating range. Headphone playback can produce changing analog output demand; stable local bypassing helps prevent supply disturbance from coupling into the converter and digital interface.
Route the serial digital audio interface as a short, controlled-impedance group and keep clock activity separated from microphone and line-level inputs. Confirm the master-clock and sample-rate relationship in firmware because the WM8731 supports programmable sample rates. Avoid routing digital return currents beneath sensitive analog input paths, and use quiet supply sections where switching converters or digital processors are physically close to the codec.
Do not assume that a related WM8731 suffix is automatically interchangeable. The WM8731CSEFL/R must be checked against the 28-QFN package drawing, the 2.7 V minimum supply requirement, exposed-pad construction, register behavior, and production packing details. In particular, SSOP-28 variants require a different footprint, and lower-supply family members require complete rail-by-rail validation before substitution.
合規資訊
No definitive compliance declaration was identified for the exact WM8731CSEFL/R orderable MPN. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-mineral status with the manufacturer using the ordering code and requested shipment destination.