WM8731CSEFL/R - 24-Bit Stereo Audio Codec | Cirrus Logic
MPN: WM8731CSEFL/R ✗ Tapus ng BuhayWM8731CSEFL/R Ulas
A stereo audio codec is a mixed-signal interface IC that converts analog microphone or line-level signals into digital PCM audio and reconstructs digital audio into an analog headphone output. In the product hierarchy, the WM8731 belongs to the audio codec class, interface IC family, and power-management-adjacent signal-chain category. Its integrated headphone driver reduces the need for separate output amplification in portable audio products.
The WM8731CSEFL/R provides 24-bit conversion resolution, a 24-bit serial interface, programmable sample-rate operation, and a 28-QFN 5 mm by 5 mm package. The 2.7 V minimum operating voltage suits low-voltage portable systems, while the 3.6 V maximum operating voltage defines the upper end of its specified analog supply range. Programmable sampling enables the host processor to select the digital audio rate required by its playback or recording path.
This codec architecture places microphone or stereo line inputs, sigma-delta conversion stages, digital filtering, volume control, and headphone-drive functions into a single package. Digital control is performed through a serial interface, allowing a host processor to configure conversion, playback, and input parameters. The 28-QFN footprint is compact, but its exposed thermal and electrical requirements must be handled with careful PCB layout and stable supply bypassing.
Typical uses include portable Internet audio devices, digital music players, portable recorders, communications equipment, and compact embedded audio systems. In a portable player, the codec can accept line or microphone inputs and drive stereo headphones while the host exchanges PCM audio over the serial bus. In a recording product, the same device can support stereo capture and headphone monitoring while avoiding a separate monitor-output converter.
Place the device close to the analog audio connectors and keep digital return paths away from microphone and line inputs. Follow the manufacturer datasheet for decoupling, exposed-pad connection, analog grounding, and supported interface modes. Correct layout is particularly important because mixed-signal codecs combine high-gain analog inputs with fast serial control and clock signals on the same compact package.
This product page consolidates the exact orderable MPN, package information, interface classification, supply limits, and verified replacement findings. It also provides application guidance, comparison fields, and design cautions that help engineers evaluate the codec before beginning schematic capture, PCB layout, or firmware integration.
Mga alternatibo na pwedeng ilagay na WM8731CSEFL/R — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Wala ng magagamit na drop-in alternatibo para sa produkto na ito.
Hilingin ang AlternatiboWM8731CSEFL/R Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | Stereo audio codec with headphone driver |
| Converter Resolution | 24 bit |
| Serial Audio Interface Resolution | 24 bit |
| Minimum Analog Supply Voltage | 2.7 V |
| Maximum Analog Supply Voltage | 3.6 V |
| Operating Supply Voltage Range | 2.7 V to 3.6 V |
| Sample Rate | Programmable |
| Package Type | 28-QFN |
| Package Dimensions | 5 mm x 5 mm |
| Uri ng Pagpapasok | Surface Mount |
| Audio Channel Configuration | Stereo |
| Headphone Output | Integrated headphone driver |
| Analog Input Support | Microphone and line-level inputs |
Gabay sa Pin Configuration ng WM8731CSEFL/R 5 mm x 5 mm
Pin configuration para sa WM8731CSEFL/R (5 mm x 5 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa WM8731CSEFL/R.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
WM8731CSEFL/R ay nararapat para sa 6 aplikasyons: Portable Internet Audio Device, Digital Music Player, Portable Stereo Recorder, Communication and Conferencing Equipment, Industrial Audio Control Panel, Embedded Audio Test and Measurement.
Portable Internet Audio Device
The WM8731CSEFL/R fits portable Internet audio equipment because it combines a 24-bit stereo codec, programmable sample rates, and an integrated headphone driver in a 28-QFN 5 mm by 5 mm package. Its 2.7 V to 3.6 V analog operating range supports low-voltage portable products where board area is limited. A host processor can configure the codec, exchange digital audio data, and drive stereo headphones without requiring a separate headphone-output amplifier. The principal design consideration is separating the sensitive analog input and headphone-output paths from the serial digital interface while maintaining short, stable supply connections around the compact QFN footprint.
Inirekomenda
Digital Music Player
A digital music player can use the WM8731CSEFL/R as the central audio interface for 24-bit playback and headphone output. Programmable sample rates allow the application processor to select an appropriate digital audio rate, while the integrated headphone driver reduces the component count needed beside the codec. The 5 mm by 5 mm 28-QFN package is useful in compact portable media products, and the specified 2.7 V to 3.6 V supply range supports low-voltage system architectures. Designers should verify the required digital supply, audio clocking scheme, output impedance, and bypass-capacitor arrangement against the manufacturer datasheet before finalizing the schematic and PCB.
Inirekomenda
Portable Stereo Recorder
The WM8731CSEFL/R suits portable stereo recording equipment that needs microphone or line-level capture, 24-bit conversion, and headphone monitoring. The stereo codec architecture can support two analog recording paths while providing digital PCM data to a host processor. Its integrated headphone driver enables monitoring without adding a separate output stage in space-constrained products. The 2.7 V to 3.6 V operating range fits many portable platforms, but analog input gain, microphone bias, input impedance, clock accuracy, and digital-output format must be confirmed. PCB layout should keep analog connectors and input traces away from serial control and clock signals.
Inirekomenda
Communication and Conferencing Equipment
The WM8731CSEFL/R can serve compact communications equipment requiring a stereo audio interface and local headphone monitoring. A host processor can configure the 24-bit codec, route capture or playback data through the serial interface, and use programmable sample rates to match the communications pipeline. The integrated headphone driver helps produce a local monitoring output without an additional amplifier in a space-constrained design. Operation from a 2.7 V to 3.6 V supply supports portable and embedded systems. Practical implementation requires checking microphone or line-input requirements, echo-control partitioning, clocking, and whether the system needs full-duplex headroom for simultaneous recording and playback.
Inirekomenda
Industrial Audio Control Panel
The WM8731CSEFL/R can be used in a compact industrial audio panel that plays status tones, voice prompts, or local monitoring audio through headphones or a small speaker network. Its 24-bit stereo conversion and programmable sample rates provide a flexible digital audio endpoint controlled by an embedded processor. The 28-QFN 5 mm by 5 mm package limits board area, while the specified 2.7 V to 3.6 V analog supply can suit embedded equipment built around low-voltage rails. Industrial implementation should account for EMI from relays and switching converters, maintain clean analog grounding, and verify that the available output power and load impedance meet the system requirement.
Inirekomenda
Embedded Audio Test and Measurement
The WM8731CSEFL/R is suitable for compact test equipment that needs a programmable stereo audio input and headphone-monitor output. The 24-bit conversion and programmable sampling support repeatable digital capture or playback, while the integrated headphone driver provides a convenient monitoring stage. Its 5 mm by 5 mm 28-QFN package allows the converter to be placed close to input and output connectors, reducing sensitive analog trace lengths. The 2.7 V to 3.6 V supply range fits embedded test systems. For laboratory accuracy, engineers should evaluate reference-clock jitter, input bandwidth, clock synchronization, grounding, and the complete signal chain rather than relying on converter resolution alone.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for WM8731CSEFL/R — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto |
|---|---|
| Package | 28-QFN (5 mm x 5 mm) |
| Brand | Cirrus Logic |
| Product Type | Stereo audio codec with headphone driver |
| Converter Resolution | 24 bit |
| Minimum Supply Voltage | 2.7 V |
| Maximum Supply Voltage | 3.6 V |
| Sample Rate | Programmable |
| Headphone Driver | Integrated |
| Mounting Type | Surface Mount |
| Orderable MPN | WM8731CSEFL/R |
Pangunahing mga Pagkakaiba
- Combines 24-bit conversion with an integrated headphone driver (kumpara saWM8731CLSEFL/R)
- Uses the exact 28-QFN 5 mm by 5 mm production configuration (kumpara saWM8731SEDS/V)
- Supports programmable sample rates for host-controlled audio paths (kumpara saWM8731CSEFL)
Talaan ng Disenyo
Place the WM8731CSEFL/R close to the audio connectors and route microphone or line inputs directly to the assigned pins with minimal trace length. Keep the serial audio, control, and clock traces away from the analog input region, especially around the exposed pad and supply connections. Use a continuous analog ground reference beneath the codec where the manufacturer layout guidance permits, and connect the exposed pad to the specified ground plane with adequate thermal and electrical vias.
Decouple each supply rail at the WM8731CSEFL/R with the capacitance and placement specified in the manufacturer datasheet. The analog operating range is 2.7 V to 3.6 V, so verify startup, load transients, and host rail tolerance across the complete operating range. Headphone playback can produce changing analog output demand; stable local bypassing helps prevent supply disturbance from coupling into the converter and digital interface.
Route the serial digital audio interface as a short, controlled-impedance group and keep clock activity separated from microphone and line-level inputs. Confirm the master-clock and sample-rate relationship in firmware because the WM8731 supports programmable sample rates. Avoid routing digital return currents beneath sensitive analog input paths, and use quiet supply sections where switching converters or digital processors are physically close to the codec.
Do not assume that a related WM8731 suffix is automatically interchangeable. The WM8731CSEFL/R must be checked against the 28-QFN package drawing, the 2.7 V minimum supply requirement, exposed-pad construction, register behavior, and production packing details. In particular, SSOP-28 variants require a different footprint, and lower-supply family members require complete rail-by-rail validation before substitution.
Impormasyon ng Pagsunod sa Kautusan
No definitive compliance declaration was identified for the exact WM8731CSEFL/R orderable MPN. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-mineral status with the manufacturer using the ordering code and requested shipment destination.