XC5VLX110-1FF676C - 110K-Cell Virtex-5 LX FPGA | AMD
MPN: XC5VLX110-1FF676C ✗ 停產XC5VLX110-1FF676C 概覽
An FPGA is a programmable digital semiconductor whose configurable logic blocks, block RAM, programmable input/output resources, and dedicated fabric connect arbitrary digital systems on one device. The Virtex-5 LX product family occupies the FPGA and CPLD hierarchy and is commonly used where high logic density, parallel processing, flexible interfaces, or hardware acceleration are required. Its fabric allows design changes to be implemented through configuration rather than a new ASIC or fixed-function chip.
The XC5VLX110 provides 110,592 logic cells and 4,608 Kb of block RAM in the 676-ball FF676 package. The package measures 27 mm by 27 mm and uses a 1 V core voltage. These resources allow implementation of substantial control logic, packet-processing functions, embedded processor systems, data acquisition pipelines, and high-speed interface bridges. The 65 nm fabrication process belongs to the generation of FPGAs that combined large programmable arrays with high-speed serial transceivers and dedicated hardware blocks.
The part's resource mix makes it useful for telecommunications equipment, industrial automation, test and measurement, video processing, embedded networking, and defense or aerospace prototypes. In these systems, the FPGA can execute parallel algorithms, buffer captured data, arbitrate multiple interfaces, and adapt to evolving protocol requirements. Commercial temperature qualification supports designs in environments where junction temperature remains within the stated 0 °C to 85 °C range.
A primary design consideration is that the FCBGA package requires careful PCB escape routing, controlled power and ground distribution, and adequate thermal design. Decoupling networks must be placed close to the device's supply pins, while high-speed routing requires a low-loss PCB stack-up and disciplined return-path continuity. The package pinout and board footprint should be checked against AMD's Virtex-5 package documentation before layout release.
This product page consolidates the verified device identity, package information, speed-grade details, resource counts, source links, drop-in family variants, and engineering guidance into a design-focused reference for engineers evaluating a high-density Virtex-5 LX FPGA.
直接替換替代品,適用於 XC5VLX110-1FF676C — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC5VLX110-1FF676C (相同外形與佔位) — 差異在於 Device Type, Package Type, Performance Grade, Process Technology, Temperature Grade.
XC5VLX110-1FFG676C
✅ 直接替換📋 參考替代品(不在目錄中)
XC5VLX110-1FFG676I
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC5VLX110-2FF676I
✅ 直接替換聯絡詢價
查看資料表 →XC5VLX110-1FF676I
✅ 直接替換聯絡詢價
查看資料表 →XC5VLX110-2FFG676C
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC5VLX110-1FF676C 最大額定值與電氣特性
| Device Type | Virtex-5 LX field-programmable gate array |
| Logic Cells | 110,592 cells |
| Block RAM | 4,608 Kb |
| Process Technology | 65 nm |
| Core Supply Voltage | 1 V |
| Speed Grade | -1 |
| Temperature Grade | Commercial |
| 工作接面溫度 | 0 °C to 85 °C |
| Package Type | 676-FCBGA |
| Package Designation | FF676 |
| Package Body Size | 27 mm × 27 mm |
| Ball Count | 676 balls |
| 安裝類型 | Surface mount |
XC5VLX110-1FF676C 27 mm × 27 mm 腳位配置指南
XC5VLX110-1FF676C(27 mm × 27 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC5VLX110-1FF676C.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC5VLX110-1FF676C 適用於 6 應用s: Industrial Automation and Control, Telecommunications Packet Processing, Test and Measurement Instrumentation, Video and Image Processing, Embedded Networking and Data Storage, Aerospace and Defense Prototypes.
Industrial Automation and Control
The XC5VLX110-1FF676C fits industrial controllers that combine motion sequencing, sensor conditioning, communications, and safety logic in one programmable device. Its 110,592 logic cells allow parallel control tasks and state machines to coexist, while 4,608 Kb of block RAM provides local buffering for sampled and processed data. The 1 V core supply and 65 nm Virtex-5 LX architecture support high logic density without the complexity of a custom ASIC. The commercial ordering code should be used only when the complete assembly remains within its 0 °C to 85 °C junction-temperature range; wider environmental requirements call for an industrial-qualified ordering code and fresh timing validation.
推薦
Telecommunications Packet Processing
The XC5VLX110-1FF676C is suitable for telecommunications packet-processing, traffic aggregation, and protocol-conversion modules where parallel logic throughput is valuable. The 110,592-cell fabric can implement multiple concurrent packet paths, framing logic, lookup engines, and interface control functions. Its 4,608 Kb of block RAM is useful for buffering packet headers, descriptor queues, and intermediate results, reducing dependence on external memory for short bursts. The -1 speed grade provides a defined timing class for legacy designs, while the 676-FCBGA footprint supports dense high-speed routing when the PCB has suitable microvia, power, and thermal provisions.
推薦
Test and Measurement Instrumentation
The XC5VLX110-1FF676C can serve as the programmable fabric in a high-channel-count acquisition or instrumentation system. Its 110,592 logic cells support parallel counters, trigger logic, digital filtering, and control sequencing, while 4,608 Kb of block RAM allows captured data to be buffered before transfer. The device is useful when timing must be coordinated across many channels and conventional processors would create unnecessary data-movement bottlenecks. Designers should use the Virtex-5 pin-description tables for every I/O assignment and validate acquisition clocks, clock-to-data relationships, and power sequencing against the selected -1 speed-grade timing model.
推薦
Video and Image Processing
The XC5VLX110-1FF676C is appropriate for pixel pipelines, image enhancement, frame analysis, and video interface conversion because programmable logic can process several pixels or lanes in parallel. The 110,592 logic cells accommodate pipeline stages, color-space conversion, filtering, and control logic, while 4,608 Kb of block RAM can hold line buffers and short video segments. The 1 V core supply and 676-ball package allow power and high-speed signals to be distributed through a multilayer PCB. Practical implementations must constrain timing for pixel clocks, preserve continuous return paths, and keep data-converter and memory interfaces away from power-distribution transitions.
推薦
Embedded Networking and Data Storage
The XC5VLX110-1FF676C can implement embedded network gateways, storage controllers, protocol bridges, and data-movement engines with deterministic hardware behavior. Its large programmable fabric can run checksum engines, packet classifiers, descriptor processing, and storage command logic concurrently, while 4,608 Kb of block RAM supplies queues and local data buffers. This architecture is useful when offloading repetitive or latency-sensitive tasks from an embedded processor. A production design should treat the FPGA configuration path as critical, provide reliable core and auxiliary supplies, and validate memory timing, SerDes usage, and interrupt latency under full operating conditions.
推薦
Aerospace and Defense Prototypes
The XC5VLX110-1FF676C can support legacy aerospace, defense, and rugged embedded prototypes that benefit from reconfigurable logic and extensive parallel processing. The 110,592 logic cells can host navigation logic, sensor fusion pipelines, communication framing, and real-time control functions, while 4,608 Kb of block RAM supports local buffering. The commercial temperature suffix does not by itself establish aerospace or defense qualification, so qualification requirements, radiation effects, operating-temperature limits, and configuration-security policies must be assessed separately. For deployed programs, the selected ordering code and its documented qualification status must be verified against the system requirements before release.
推薦
推薦產品摘要
工程參考資料,適用於 XC5VLX110-1FF676C — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC5VLX110-1FFG676C | XC5VLX110-1FFG676I | XC5VLX110-2FF676I | XC5VLX110-1FF676I | XC5VLX110-2FFG676C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-FCBGA (FF676) | 676-FCBGA (FF676) | 676-FCBGA (FF676) | 676-FCBGA (FF676) | 676-FCBGA (FF676) | 676-FCBGA (FF676) |
| Device Family | Virtex-5 LX | Virtex-5 LX | Virtex-5 LX | Virtex-5 LX | Virtex-5 LX | Virtex-5 LX |
| Logic Cells | 110,592 cells | 110,592 cells | 110,592 cells | 110,592 cells | 110,592 cells | 110,592 cells |
| Block RAM | 4,608 Kb | 4,608 Kb | 4,608 Kb | 4,608 Kb | 4,608 Kb | 4,608 Kb |
| Speed Grade | -1 | -1 | -1 | -2 | -1 | -2 |
| Temperature Grade | Commercial, 0 °C to 85 °C junction | Commercial, 0 °C to 85 °C junction | Industrial | Industrial | Industrial | Commercial, 0 °C to 85 °C junction |
| Package Finish Identifier | No G identifier | G lead-free identifier | G lead-free identifier | No G identifier | No G identifier | G lead-free identifier |
| Core Supply Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
| Process Technology | 65 nm | 65 nm | 65 nm | 65 nm | 65 nm | 65 nm |
主要差異化特點
- Direct commercial-temperature ordering code (對比XC5VLX110-1FF676I)
- Original -1 timing class (對比XC5VLX110-2FF676I)
- Full 110,592-cell resource density in the FF676 footprint (對比XC5VLX110-1FFG1153C)
設計說明
Design the FF676 escape routing from the exact AMD package pinout rather than from a generic BGA template. Confirm every ball location, package dimension, solder-mask definition, and land pattern before fabrication. A 676-ball FCBGA generally requires dense via-in-pad or microvia structures, and layer-transition return paths must remain continuous beneath high-speed signals. Stack-up changes alter escape-routing capacitance and can affect timing, so the PCB stack-up should be fixed before detailed routing.
Partition the FPGA's power rails according to the manufacturer pin-description table and place the required bypass network directly at each supply connection. Keep the 1 V core rail distribution symmetrical and isolate noisy supply paths from sensitive configuration or reference circuitry. Validate voltage droop, startup sequencing, and current margin with the selected device speed and temperature grade. Do not infer decoupling values from generic FPGA guidance when the exact family documentation specifies different requirements.
The FCBGA's exposed thermal behavior and the board's copper planes must be evaluated together because heat removal depends on the package substrate, solder joints, via array, and inner-layer copper. Use AMD's thermal or power-estimation guidance for the selected device and build the PCB with a continuous thermal-via field beneath the device where the package design permits. The commercial suffix specifies a 0 °C to 85 °C junction range, so thermal analysis must include worst-case ambient, airflow, activity factor, and neighboring heat sources.
Do not treat every FF676 ordering code as an unconditional substitute. Confirm the speed-grade suffix, C-versus-I temperature class, G lead-free identifier, device revision, and package documentation. When changing from -1 to -2, regenerate timing constraints and validate the bitstream against the new timing model. When changing from commercial to industrial, confirm all environmental and qualification requirements. Also verify that a reused configuration supports the exact replacement part before production release.
合規資訊
The G ordering-code identifier denotes a lead-free package option for the corresponding G-listed variants, but separate compliance status for the exact target and every alternative was not established. The commercial C suffix is a temperature-grade designation and is not itself an AEC-Q100 qualification statement.