XC5VLX50-3FFG676C - 46,080 Logic Cells FPGA | AMD
MPN: XC5VLX50-3FFG676C ✗ 停產XC5VLX50-3FFG676C 概覽
A field-programmable gate array is a programmable digital integrated circuit containing configurable logic blocks, programmable interconnect, block RAM, digital signal-processing resources, and input/output resources. The FPGA category sits above programmable logic and below programmable digital semiconductors. Virtex-5 LX devices combine a general-purpose fabric with embedded memory, DSP48 slices, clock-management resources, and high-speed serial transceivers, making the architecture suitable for demanding parallel-processing, signal-processing, communications, and embedded-control systems.
Key resources include 46,080 logic cells organized across 3,600 configurable logic blocks or logic array blocks, 440 user I/O, and 1,769,472 total RAM bits. The 676-pin FCBGA package provides a high-density interconnect for designs requiring substantial parallel I/O. Its 65 nm CMOS process and Virtex-5 architecture established a mature platform for high-performance logic implementation, prototype development, and embedded systems.
The FPGA architecture supports parallel datapaths, state machines, protocol handling, and hardware-accelerated processing. Block RAM provides dedicated on-chip storage, while the large I/O count allows multiple buses, high-speed interfaces, memory interfaces, and external control connections to coexist. Because this is a configurable device, final performance depends on the implemented architecture, clocking, I/O standards, memory organization, and routing congestion rather than on logic-cell count alone.
Typical applications include telecommunications equipment, industrial automation, test and measurement, high-speed networking, embedded control, signal processing, and aerospace or defense systems. The XC5VLX50-3FFG676C is particularly appropriate when a design needs substantially more parallel fabric and I/O than smaller FPGAs while retaining the established Virtex-5 design flow and 676-pin footprint.
Designers should use the AMD Virtex-5 package pinout files when assigning power, ground, configuration, clock, and user I/O connections. The 676-pin FCBGA requires a controlled PCB stack-up, escape routing, via-in-pad or via-landing practices where appropriate, and careful power-plane distribution. Configuration, decoupling, thermal management, and high-speed I/O constraints must be validated in the selected FPGA design toolchain.
This page consolidates the device identity, resource specifications, compatible speed-grade options, and practical PCB guidance into a concise engineering reference. The comparison material distinguishes the available -1 and -2 variants from the target -3 grade and supports faster sourcing, replacement assessment, and design-footprint verification.
直接替換替代品,適用於 XC5VLX50-3FFG676C — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC5VLX50-3FFG676C (相同外形與佔位) — 差異在於 Device Type, Package, Programmable Logic Type, Speed Grade.
XC5VLX50-1FFG676C
✅ 直接替換聯絡詢價
查看資料表 →XC5VLX50-1FFG676I
✅ 直接替換聯絡詢價
查看資料表 →XC5VLX50-2FFG676I
✅ 直接替換聯絡詢價
查看資料表 →XC5VLX50-2FF676I
✅ 直接替換聯絡詢價
查看資料表 →XC5VLX50-3FFG676C 最大額定值與電氣特性
| Device Type | Virtex-5 LX field-programmable gate array |
| Logic Cells | 46,080 cells |
| Configurable Logic Blocks / Logic Array Blocks | 3,600 blocks |
| User I/O | 440 I/O |
| Total RAM Bits | 1,769,472 bits |
| Process Technology | 65 nm CMOS |
| Core Supply Voltage | 1 V |
| Performance Grade | -3 |
| 封裝 | 676-pin FCBGA |
| 安裝類型 | Surface mount |
| Junction Temperature Range | 0°C to 85°C |
| Programmable Logic Type | FPGA |
| Device Family | Virtex-5 LX |
XC5VLX50-3FFG676C 676-pin fcbga 腳位配置指南
XC5VLX50-3FFG676C(676-pin fcbga 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC5VLX50-3FFG676C.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC5VLX50-3FFG676C 適用於 6 應用s: Telecommunications Equipment, Industrial Automation and Control, Test and Measurement, Signal Processing, Aerospace and Defense Systems, Embedded Control and Networking.
Telecommunications Equipment
The XC5VLX50-3FFG676C fits telecommunications equipment requiring extensive parallel logic, high I/O density, and dedicated FPGA resources. Its 46,080 logic cells can implement packet-processing pipelines, framing logic, channelized interfaces, and control functions, while 1,769,472 RAM bits support buffering, lookup tables, and packet storage. The 440 user I/O provide connections to transceivers, memory, backplanes, and system-control devices. The -3 performance grade is useful when higher-speed timing paths are needed. Board integration must account for the 676-ball FCBGA, controlled power delivery, and the AMD package mapping for configuration and user signals.
推薦
Industrial Automation and Control
The XC5VLX50-3FFG676C is suitable for industrial automation when a controller must combine deterministic parallel logic with numerous field and machine interfaces. The 46,080 logic cells can implement motion sequences, protocol engines, safety interlocks, and real-time control pipelines, while 440 user I/O can connect encoders, actuators, sensors, and communications transceivers. Its 1,769,472 RAM bits provide local storage for position tables and diagnostic records. The specified 0°C to 85°C junction range supports many industrial environments, subject to the system thermal design. Validate timing and signal integrity against the exact external devices connected to the FCBGA.
推薦
Test and Measurement
The XC5VLX50-3FFG676C can serve as the programmable processing core in test and measurement equipment requiring multiple parallel channels and precise timing. Logic resources can implement pattern generation, acquisition control, digital signal conditioning, and instrument protocols, while 440 user I/O provide flexible channel counts. The 1,769,472 RAM bits allow deep sample buffers, correlation windows, or firmware-assisted processing. Its -3 performance grade can improve timing margin in wide parallel datapaths. Designers should follow the manufacturer power and decoupling guidance, use the official package pinout, and verify signal-integrity constraints for every external interface connected to the 676-pin FCBGA.
推薦
Signal Processing
The XC5VLX50-3FFG676C is well matched to parallel signal-processing systems that combine sampling pipelines, control logic, and substantial external connectivity. The 46,080 logic cells can support filtering, correlation, modulation, demodulation, or custom accelerator pipelines, while block RAM resources totaling 1,769,472 bits can provide buffering and coefficient storage. With 440 user I/O, the device can connect directly to multiple converters, transceivers, and clock sources. The -3 grade is appropriate where implementation timing is more restrictive than in the -1 or -2 alternatives. Clock planning, package-aware I/O constraints, and timing closure should be completed in the selected AMD FPGA toolchain.
推薦
Aerospace and Defense Systems
The XC5VLX50-3FFG676C can support complex aerospace, defense, and mission-system logic where programmable parallelism, high I/O availability, and on-chip memory are important. The FPGA resources can implement navigation, radar, communications, data-acquisition, and control functions without relying on fixed logic. The 676-pin FCBGA allows dense integration with memory and high-speed interface devices, while the -3 grade supports demanding timing implementations. Selection for flight or mission equipment requires additional program-specific review of qualification, radiation, temperature, reliability, and traceability requirements. The device should not be treated as automatically qualified solely because it is suitable for demanding programmable-logic applications.
推薦
Embedded Control and Networking
The XC5VLX50-3FFG676C is useful for embedded network appliances requiring hardware-assisted protocol handling and extensive peripheral connectivity. Its 46,080 logic cells can accelerate packet inspection, encryption control, traffic shaping, or storage-interface logic, while 1,769,472 RAM bits support packet queues and descriptor structures. The 440 user I/O allow integration with multiple network PHYs, memory devices, flash, and control peripherals. The higher -3 performance grade can provide additional timing margin for wide or deeply pipelined designs. A practical implementation requires careful clock distribution, controlled PCB geometry for the 676-ball footprint, and validation of all high-speed interfaces against the selected I/O standards.
推薦
推薦產品摘要
工程參考資料,適用於 XC5VLX50-3FFG676C — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC5VLX50-1FFG676C | XC5VLX50-1FFG676I | XC5VLX50-2FFG676I | XC5VLX50-2FF676I |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 676-pin FCBGA | 676-pin FCBGA | 676-pin FCBGA | 676-pin FCBGA | 676-pin FCBGA |
| Performance Grade | -3 | -1 | -1 | -2 | -2 |
| Logic Cells | 46,080 cells | 46,080 cells | 46,080 cells | 46,080 cells | 46,080 cells |
| Special Feature | -3 performance grade | -1 performance grade | -1 performance grade with industrial suffix | -2 performance grade with industrial suffix | -2 performance grade with industrial suffix |
主要差異化特點
- Higher speed grade within the same device family (對比XC5VLX50-1FFG676C)
- More timing margin than the intermediate -2 option (對比XC5VLX50-2FFG676I)
- Pin-compatible consolidation of identical FPGA resources (對比XC5VLX50-2FF676I)
設計說明
Assign the FPGA using the AMD Virtex-5 package device pinout files rather than a generic FCBGA symbol. Confirm every power, ground, configuration, clock, and user-I/O ball against the selected XC5VLX50 device file. The 676-ball footprint requires fine-pitch escape routing, usually through a multilayer PCB with via arrays placed according to the manufacturer’s package and assembly recommendations. Keep high-speed routes short and controlled to limit insertion loss, reflection, and crosstalk.
Follow the manufacturer power-supply, decoupling, and sequencing requirements for the 1 V core rail and associated I/O supplies. Place the required decoupling capacitors close to their assigned balls with very short ground-return paths, and provide adequate copper area for current delivery without compromising the required ball fanout. Validate steady-state and transient currents across the -3 device’s operating range and use the official design-support files to confirm rail values and decoupling quantities.
Estimate the complete junction-temperature rise from FPGA power, nearby component heat, PCB copper area, airflow, and the selected package thermal model. Estimated: the junction-temperature calculation must use the device power dissipation and the board-specific thermal resistance rather than the nominal 0°C to 85°C junction rating alone. Provide thermal vias where the package and PCB design guide permits them, maintain airflow across the BGA assembly, and verify steady-state temperature during worst-case operation.
Do not treat a lower-speed FPGA as an automatically equivalent replacement. Moving from XC5VLX50-3FFG676C to an -1 or -2 grade can change internal timing margins even when the package and logical resource totals match. Check the device and package files, rerun implementation, inspect timing closure, and review I/O and configuration compatibility. Do not reuse an existing bitstream across speed grades without following the AMD programming and device-migration requirements.
合規資訊
Compliance attributes require project-specific confirmation from the current manufacturer environmental declaration or supplier documentation.