XC6SLX45-N3CSG324I - 43,661 Logic Cell Spartan-6 FPGA | AMD
MPN: XC6SLX45-N3CSG324I ✗ 停產XC6SLX45-N3CSG324I 概覽
A field-programmable gate array is a reconfigurable digital semiconductor in which the interconnect and logic are defined after fabrication. Within the semiconductor hierarchy, an FPGA belongs to programmable logic devices and combines configurable logic blocks, block RAM, programmable input/output resources, clocking, and high-speed serial transceivers. This integration allows one physical device to implement multiple control and datapath functions while reducing the number of discrete components in a system.
The XC6SLX45-N3CSG324I provides 3,411 logic array blocks, 43,661 logic elements, 218 user I/O, and 2,138,112 total RAM bits. Its 324-contact chip-scale ball grid array supports dense board-level integration while exposing a broad interface complement. The Spartan-6 architecture is established for industrial controls, test equipment, communications infrastructure, instrumentation, embedded processing, and high-performance signal-processing designs.
The LX device family combines programmable logic with dedicated block RAM and clock-management resources. Designers can implement parallel pipelines, state machines, protocol controllers, data acquisition functions, and interface bridges in one device. The N3 ordering code distinguishes this configuration from other speed, temperature, and package options, so design decisions should also account for the exact device identifier rather than relying only on the XC6SLX45 family name.
Typical uses include industrial automation controllers, network-interface equipment, data-acquisition systems, embedded storage controllers, communications gateways, and instrumentation platforms. Its 218 user I/O are particularly useful when a design must connect multiple buses, converters, memory devices, status signals, and control peripherals while retaining substantial internal programmable logic.
Board design requires careful BGA escape routing, controlled impedance for high-speed interfaces, decoupling close to the power balls, and thermal management for sustained logic activity. The design must use the official Spartan-6 package pinout file for the exact CSG324 ball assignments and verify every power, ground, configuration, clock, and user-I/O connection before fabrication.
This page combines the exact device identity, verified resource counts, package information, application guidance, design checks, and compatible Spartan-6 alternatives. It also explains the limitations that matter when planning a footprint-compatible substitution, particularly differences in speed grade, temperature grade, device family, configuration requirements, and lifecycle status.
直接替換替代品,適用於 XC6SLX45-N3CSG324I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC6SLX45-N3CSG324I (相同外形與佔位) — 差異在於 Device Type, Package Type, RoHS Status, Mounting Type, Core Supply Voltage.
XC6SLX45-3CSG324I
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC6SLX45-2CSG324I
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC6SLX45-1CSG324I
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XA6SLX45-3CSG324I
✅ 直接替換📋 參考替代品(不在目錄中)
XC6SLX45-3CSG324C
✅ 直接替換聯絡詢價
查看資料表 →XC6SLX45-N3CSG324I 最大額定值與電氣特性
| Device Type | Spartan-6 LX Field-Programmable Gate Array |
| Logic Elements | 43,661 logic elements |
| Logic Array Blocks | 3,411 logic array blocks |
| User I/O | 218 user I/O |
| Total Block RAM | 2,138,112 RAM bits |
| 封裝 | 324-ball CSBGA |
| Package Pin Count | 324 pins |
| Package Type | Chip-Scale Ball Grid Array |
| 安裝類型 | Surface mount |
| Product Series | Spartan-6 LX |
| Device Designation | XC6SLX45-N3 |
| Programmable Logic | 43,661 configurable logic elements |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
XC6SLX45-N3CSG324I chip-scale ball grid array 腳位配置指南
XC6SLX45-N3CSG324I(chip-scale ball grid array 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC6SLX45-N3CSG324I.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC6SLX45-N3CSG324I 適用於 6 應用s: Industrial Automation Controller, Data-Acquisition and Instrumentation System, Communications Gateway and Protocol Controller, Embedded Storage and Flash Controller, Test and Measurement Front End, Security and Access-Control Equipment.
Industrial Automation Controller
The XC6SLX45-N3CSG324I fits industrial automation controllers that must combine sequential machine control, diagnostics, communications, and real-time signal handling in one programmable-logic device. Its 43,661 logic elements can implement multiple control and protocol engines, while 3,411 logic array blocks provide the fabric needed for state machines, arbitration, and datapath logic. The 2,138,112 RAM bits support local buffering, counters, trace storage, and communication queues without requiring an external FPGA buffer. With 218 user I/O, the device can connect digital sensors, actuator outputs, serial interfaces, and external converters. Designers should allocate I/O standards and timing constraints in the FPGA toolchain, follow the CSG324 pinout file, and confirm the industrial temperature and qualification requirements for the deployed environment.
推薦
Data-Acquisition and Instrumentation System
The XC6SLX45-N3CSG324I is suitable for parallel data-acquisition systems requiring real-time sampling coordination, digital filtering, calibration tables, trigger logic, and control outputs. The 43,661 logic elements and 3,411 logic array blocks can host acquisition pipelines and instrument-control processors, while 2,138,112 RAM bits accommodate sample buffers and working data. Its 218 user I/O allow direct connection of ADC control signals, status lines, clock references, and external memories. The Spartan-6 LX fabric can support clock-domain crossing and synchronized interfaces when implemented with appropriate constraints and clocking resources. Practical implementation requires assigning dedicated clock inputs correctly, controlling high-speed output skew, and validating analog timing through the complete acquisition chain rather than relying only on FPGA logic simulation.
推薦
Communications Gateway and Protocol Controller
The XC6SLX45-N3CSG324I can serve as the central programmable-logic element in a communications gateway where packet framing, routing, buffering, error handling, and multiple peripheral interfaces must operate concurrently. Its 43,661 logic elements provide capacity for parallel protocol engines, and its 2,138,112 RAM bits can support FIFO-based traffic isolation and packet staging. The 218 user I/O expose enough connections for multiple buses, status LEDs, reset control, flash memory, and management interfaces. For line-rate designs, engineers must select the correct Spartan-6 clocking and transceiver resources, constrain input and output delays, and confirm package-level pin compatibility. The device is most appropriate where parallel logic throughput matters more than minimizing the number of pins.
推薦
Embedded Storage and Flash Controller
The XC6SLX45-N3CSG324I is appropriate for embedded flash controllers, configuration managers, and storage-facing adapters because programmable logic can implement command sequencing, ECC or parity functions, wear-leveling policies, and fault handling. The 3,411 logic array blocks provide substantial combinational and sequential capacity, while 2,138,112 RAM bits can be used for write buffers, command descriptors, and data caches. The 218 user I/O provide space for NAND-style command, data, and status interfaces as well as host-side connections. A production design must define precise timing constraints for asynchronous and synchronous memory signals, protect configuration and boot interfaces, and validate reset recovery. Because storage designs are sensitive to latency and burst behavior, functional simulation should be supplemented with hardware timing analysis.
推薦
Test and Measurement Front End
The XC6SLX45-N3CSG324I fits modular test and measurement equipment that requires coordinated stimulus generation, response capture, pattern processing, and front-panel logic. Its 43,661 logic elements can implement multiple instrument channels or a flexible sequencing engine, while 2,138,112 RAM bits support captured waveforms and intermediate processing buffers. The 218 user I/O support direct coupling to converters, reference clocks, trigger inputs, relay drivers, and status indicators. Designers can partition the fabric between acquisition and analysis functions while maintaining deterministic clocking through the Spartan-6 clock resources. For accurate measurements, analog paths should be analyzed separately from FPGA timing, and output standards, drive strength, and loading must remain within device limits. Signal-integrity validation on the assembled board is recommended before laboratory calibration.
推薦
Security and Access-Control Equipment
The XC6SLX45-N3CSG324I can implement protocol engines, credential parsers, event filters, and cryptographic control logic for access-control and security equipment. The 218 user I/O support readers, locks, displays, alarm outputs, network management interfaces, and status indicators, while the internal RAM accommodates short transaction histories and buffered communication data. Its 43,661 logic elements permit parallel handling of multiple readers and administrative functions without forcing all work through an external processor. Security implementations should separate external interfaces, sensitive key material, and boot or update logic, and should use the device's supported configuration mechanisms to protect intellectual property. Final production approval requires verification of configuration access, update rollback behavior, timing margins, and environmental requirements in the manufacturer documentation.
推薦
推薦產品摘要
工程參考資料,適用於 XC6SLX45-N3CSG324I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC6SLX45-3CSG324I | XC6SLX45-2CSG324I | XC6SLX45-1CSG324I | XA6SLX45-3CSG324I | XC6SLX45-3CSG324C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 324-ball CSBGA | 324-ball CSBGA | 324-ball CSBGA | 324-ball CSBGA | 324-ball CSBGA | 324-ball CSBGA |
| FPGA Family | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Automotive Spartan-6 LX | Spartan-6 LX |
| Speed or Ordering Grade | N3 designation | -3 speed designation | -2 speed designation | -1 speed designation | Automotive -3 designation | -3 speed designation |
主要差異化特點
- Provides the full XC6SLX45 programmable-logic resource set in a 324-ball package (對比XC6SLX45-2CSG324I)
- Combines a 324-ball CSBGA with 218 user I/O for interface-dense industrial designs (對比XC6SLX45-1CSG324I)
- Exact N3 ordering configuration for projects approved around the target device (對比XC6SLX45-3CSG324I)
設計說明
Use the official AMD Spartan-6 CSG324 package pinout file as the controlling source for ball assignments, power rails, configuration pins, clock inputs, and user I/O. The 324-ball CSBGA requires a multilayer PCB with short BGA escape paths and adequate via-in-pad or microvia construction where assembly capability permits. Assign solid plane regions to the required supply and ground balls, but do not split or reshape planes in ways that disturb return paths. Compare every schematic symbol against the device-specific package file before fabrication.
Constrain all board and FPGA interfaces with realistic external timing, clock uncertainty, and board-delay assumptions. The XC6SLX45-N3CSG324I has 218 user I/O, so a large interface can easily introduce simultaneous-switching noise and crosstalk. Maintain controlled impedance for high-speed links, provide adequate drive strength where supported, avoid long stubs, and confirm that every connected pin has a valid I/O standard. Re-run static timing analysis with actual board and component models before releasing the bitstream.
Estimate junction temperature from the selected design's worst-case core activity, I/O toggle rate, supply voltage, and board thermal resistance. The 324-ball CSBGA benefits from uninterrupted copper beneath and around the device, but thermal performance still depends on layer count, via distribution, airflow, and adjacent heat sources. Validate the estimate on assembled hardware at maximum ambient temperature. Use conservative thermal margins rather than relying on a typical activity factor or an idle-state measurement.
Do not treat a package match as proof of a drop-in FPGA replacement. Confirm speed grade, temperature grade, automotive qualification, configuration mode, pin electrical behavior, supported clocking resources, bitstream target, and lifecycle status. The N3 designation must not be casually changed to -3, -2, or -1. For any alternative, rerun synthesis, implementation, timing analysis, and hardware validation with the exact replacement MPN enabled in the FPGA toolchain.
Follow the AMD power-decoupling recommendations for every supply rail and place the required bypass capacitors close to the associated package balls. Separate power and ground-return paths carefully, use multiple stitching vias where the package data specifies them, and keep high-current routing away from sensitive clock and configuration inputs. Account for both static and I/O switching demand in the power budget. The final rail tolerances should include regulator ripple, transient response, and worst-case board temperature.
合規資訊
The target-specific source snippets do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. A separate Kynix listing references RoHS3, but it is not sufficient for a definitive target-device compliance declaration.