XC7A15T-2FTG256C - 16,640 LEs Artix-7 FPGA | AMD
MPN： XC7A15T-2FTG256C ✓ 啟用中XC7A15T-2FTG256C 概覽
An FPGA is a reconfigurable digital semiconductor in which the logic, interconnections, and processing resources are configured after manufacture. Within the product hierarchy, the XC7A15T belongs to the Artix-7 FPGA family and combines a programmable logic array, block RAM, DSP resources, and general-purpose input/output blocks in one device. This integration allows designers to implement parallel data processing, control logic, protocol bridging, and interface functions on a single programmable chip.
The principal verified device figures are 16,640 logic cells, 921,600 RAM bits, 170 I/O, and a 256-LBGA package. The -2 designation identifies its performance grade within the Artix-7 family. Its low-cost and power-efficient positioning makes it relevant to industrial automation, machine vision, telecommunications infrastructure, protocol conversion, baseband processing, wireless backhaul, and embedded control systems. The 256-LBGA package also supports compact, high-density board layouts.
Technically, the device combines programmable logic fabric with dedicated memory and DSP blocks, allowing multiple data paths to be processed concurrently. The large 170-I/O count provides substantial connectivity for external memory, sensors, network transceivers, display interfaces, and control peripherals. Its 921,600 RAM bits support buffering and data storage within the FPGA fabric, while the dedicated DSP capability enables fixed-point filtering, transform, and signal-processing functions without requiring separate accelerators.
Typical implementations place the FPGA beside high-speed transceivers, external memory, clock sources, and application-specific peripherals. Machine-vision designs can parallelize image acquisition and filtering, telecom equipment can perform line-card adaptation or protocol bridging, and industrial controllers can combine sensor acquisition with deterministic logic. Because FPGA resources are configurable, the same family can support multiple product variants without changing the PCB footprint when device density and speed-grade requirements permit.
Designers should review the manufacturer Artix-7 datasheet and package pinout files before assigning bank voltages, clock pins, high-speed serial pins, and power rails. Decoupling, PCB return paths, thermal management, configuration interface access, and proper I/O standard selection are critical to reliable implementation. Although the 256-LBGA offers high I/O density, its fine-pitch routing and power-delivery requirements demand careful constraint-driven layout and multilayer PCB planning.
This product data combines verified distributor pricing, Artix-7 family specifications, package information, and practical engineering guidance. It also distinguishes true same-package drop-in options from broader functional FPGA alternatives, helping engineers shortlist a device while still validating timing, power, configuration, and lifecycle requirements against the official AMD documentation.
直接替換替代品，適用於 XC7A15T-2FTG256C — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： XC7A15T-2FTG256C （相同外形與佔位） — 差異在於 Package, Device Type, Temperature Grade, Logic Cells, Speed Grade.
XC7A15T-1FTG256C
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC7A15T-1FTG256E
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
XC7A15T-2FTG256E
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
XC7A15T-3FTG256C
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
XC7A15T-3FTG256E
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC7A15T-2FTG256C 最大額定值與電氣特性
| Device Type | Artix-7 field-programmable gate array (FPGA) |
| Logic Cells | 16,640 logic cells |
| RAM Capacity | 921,600 RAM bits |
| Input/Output Count | 170 I/O |
| Performance Grade | -2 speed grade |
| 封裝 | 256-LBGA |
| Temperature Range | 0°C to +85°C |
| Logic Process | 28 nm |
| 安裝類型 | Surface mount |
XC7A15T-2FTG256C 256-lbga 腳位配置指南
XC7A15T-2FTG256C（256-lbga 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： XC7A15T-2FTG256C.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC7A15T-2FTG256C 適用於 6 應用s: Industrial Machine Vision, Industrial Protocol Bridging, Telecommunications Line Cards, Wireless Backhaul Data Processing, Embedded Control and Automation, Test and Measurement Instrumentation.
Industrial Machine Vision
The XC7A15T-2FTG256C fits machine-vision preprocessing because its 16,640 logic cells and DSP capability can process multiple pixel streams in parallel. The 170 I/O provide connections to image sensors, line-scan or frame-capture electronics, trigger inputs, and machine-vision controllers. Placing the FPGA between the camera interface and the processor allows exposure, geometry, filtering, and thresholding stages to be consolidated. The -2 speed grade should be selected only after worst-case image-pipeline timing is verified, while the 0°C to +85°C range suits commercial factory equipment.
推薦
Industrial Protocol Bridging
The XC7A15T-2FTG256C is appropriate for protocol converters that translate between industrial fieldbus, serial, and parallel interfaces. Its 16,640 logic cells can host parallel-to-serial converters, packetization logic, state machines, and diagnostics, while 170 I/O expand connection options. The commercial 0°C to +85°C specification covers typical indoor control cabinets, and the -2 grade provides a defined performance target for deterministic packet processing. Engineers should validate timing against the slowest required interface and include recovery behavior for malformed or interrupted traffic.
推薦
Telecommunications Line Cards
The XC7A15T-2FTG256C can implement cost-sensitive line-card functions such as protocol adaptation, baseband preprocessing, framing, and traffic aggregation. Its programmable fabric supports parallel datapaths, 921,600 RAM bits provide on-chip buffering, and 170 I/O enable dense connectivity to backplane and transceiver circuitry. The -2 performance grade must be checked against the required line rate and worst-case packet latency. Because the device is rated from 0°C to +85°C, outdoor or uncontrolled telecom environments require an extended-temperature grade or additional environmental protection.
推薦
Wireless Backhaul Data Processing
The XC7A15T-2FTG256C is suitable for packet processing, time alignment, and control logic around wireless-backhaul radio links. Its DSP resources can accelerate filtering or symbol-processing stages, while the programmable fabric handles scheduling, headers, monitoring, and interface conversion. The 170-I/O count supports radio control, status signals, clocks, and high-speed data paths, and the 256-LBGA keeps the implementation compact. Designers should budget timing closure for the -2 grade and isolate sensitive clock and transceiver paths to prevent data-conversion errors.
推薦
Embedded Control and Automation
The XC7A15T-2FTG256C supports parallel embedded-control tasks that combine sensors, counters, state machines, communications, and safety-adjacent interlocks in one programmable device. Its 16,640 logic cells and 921,600 RAM bits accommodate concurrent control channels without requiring a separate microcontroller for every function. The 170 I/O provide broad sensor and actuator connectivity, while the -2 grade targets predictable operational performance. Before deployment, verify interrupt latency, I/O standards, clock tolerance, and recovery behavior under power-up or configuration fault conditions.
推薦
Test and Measurement Instrumentation
The XC7A15T-2FTG256C can implement timing, pattern-generation, data-capture, and analysis logic in compact instrumentation. Its 16,640 logic cells provide parallel digital channels, 921,600 RAM bits support sample buffering, and 170 I/O permit connection to test fixtures and control interfaces. The -2 grade must meet the instrument's specified throughput, and the commercial temperature range limits direct use in hot industrial environments. Synchronization of clock domains, deterministic I/O timing, and calibration data are the principal implementation concerns.
推薦
推薦產品摘要
工程參考資料，適用於 XC7A15T-2FTG256C — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC7A15T-1FTG256C | XC7A15T-1FTG256E | XC7A15T-2FTG256E | XC7A15T-3FTG256C | XC7A15T-3FTG256E |
|---|---|---|---|---|---|---|
| Package | 256-LBGA (FTG256) | FTG256, same package configuration | FTG256, same package configuration | FTG256, same package configuration | FTG256, same package configuration | FTG256, same package configuration |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 16,640 logic cells | 16,640 logic cells | 16,640 logic cells | 16,640 logic cells | 16,640 logic cells | 16,640 logic cells |
| RAM Capacity | 921,600 RAM bits | 921,600 RAM bits | 921,600 RAM bits | 921,600 RAM bits | 921,600 RAM bits | 921,600 RAM bits |
| Input/Output Count | 170 I/O | 170 I/O | 170 I/O | 170 I/O | 170 I/O | 170 I/O |
| Speed Grade | -2 | -1 | -1 | -2 | -3 | -3 |
| Temperature Grade | Commercial, 0°C to +85°C | Commercial | Extended temperature | Extended temperature | Commercial | Extended temperature |
| Logic Process | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
主要差異化特點
- Commercial-temperature Artix-7 option with the -2 speed grade (對比XC7A15T-1FTG256C)
- Same speed grade with extended-temperature qualification (對比XC7A15T-2FTG256E)
- Higher timing headroom for critical-path designs (對比XC7A15T-3FTG256C)
- Verified compact configuration with substantial I/O density (對比XC7A35T-1FTG256I)
設計說明
Use the AMD FTG256 package pinout as the authority for every land, via, and component symbol. The 256-LBGA footprint requires exact ball geometry and a multilayer PCB with short power and ground connections. Place high-speed clocks and serial interfaces away from noisy switching nodes, provide continuous reference planes, and constrain all differential and clock routes. Verify ball assignments against the selected speed and temperature suffix before releasing the PCB.
Partition the design into the voltage rails required by the Artix-7 datasheet and assign each bank to a compatible I/O standard. Place local bulk and high-frequency decoupling close to the associated package balls, and keep switching-converter return currents out of sensitive reference paths. Because the supplied data does not include the complete power-consumption table, calculate worst-case static and dynamic demand from the actual implemented design rather than applying an unverified generic current value.
Reserve the configuration interface and pins required by the selected boot mode, then keep the configuration path away from potential sources of corruption. Plan termination, biasing, and I/O drive according to each external interface rather than applying a single termination strategy across all banks. For clocked interfaces, match trace lengths to the timing requirement and validate skew through post-layout timing analysis. The target's 170 I/O provide density, but unused pins should still be assigned a deliberate state in the constraints.
Do not treat a different Artix-7 density as a transparent drop-in replacement, and do not assume that a -1 or -3 speed grade is electrically and thermally equivalent to -2. A same-package alternative can still change timing margin, power behavior, and configuration support. After substitution, rerun synthesis, implementation, timing analysis, power estimation, and pin-level verification. Confirm the operating-temperature grade as well: the C suffix is commercial, while an E suffix changes the temperature qualification.
合規資訊
The supplied web data does not explicitly state compliance status for the target MPN. The commercial 0°C to +85°C temperature rating does not by itself establish AEC-Q100 qualification.
