AMD

XC7K160T-L2FBG484E - Low-Power Kintex-7 FPGA | AMD

MPN: XC7K160T-L2FBG484E ✓ 啟用中
484-pin FCBGA Package -2L Speed
MOQ: 1 |

XC7K160T-L2FBG484E 概覽

The AMD XC7K160T-L2FBG484E is a Kintex-7 field-programmable gate array with 162,240 logic cells, 11,700 Kb of block RAM, and 285 I/O, supplied in a 484-pin FCBGA package measuring 23 mm by 23 mm. Its -2L speed grade targets lower maximum static power and can support lower core voltages than the standard -2 grade, while the -3 grade provides the highest Kintex-7 performance. The XC7K160T combines programmable logic, DSP, block RAM, high-speed serial transceivers, and general-purpose I/O in a single device for demanding embedded systems.

A Kintex-7 FPGA belongs to the programmable-logic hierarchy, where an FPGA is a semiconductor containing configurable logic blocks, memory, and routing resources. These resources form parallel processing, interface, and signal-processing circuits after the device is programmed. Compared with application-specific standard logic, an FPGA supports field upgrades, hardware parallelism, and product differentiation without requiring a new ASIC fabrication run. Kintex-7 devices occupy the middle of the AMD Xilinx product range between lower-cost Artix-7 and higher-density Virtex-7 families.

The principal device resources include 162,240 logic cells and 11,700 Kb of block RAM. The 285 available I/O support connections to memory, converters, network transceivers, clocks, and external control logic. The -2L operating designation identifies the lower-power family variant rather than the standard -2 device. This makes the part suitable for systems that require substantial parallel processing while balancing performance, thermal design, and power consumption across industrial, communications, instrumentation, and defense-oriented equipment.

The FPGA architecture combines programmable logic with dedicated DSP and memory resources, enabling fixed- or floating-point pipelines, digital filtering, modulation, protocol handling, and high-throughput data movement. Its large 484-contact FCBGA package also creates a demanding PCB-layout environment: high-speed differential pairs, multiple supply rails, exposed thermal requirements, and numerous decoupling connections must be planned together. Designers should treat power distribution, via current capacity, return-path continuity, and thermal dissipation as part of the FPGA design rather than as after-the-fact PCB details.

Typical uses include telecommunications line cards, industrial vision, radar and signal-processing front ends, high-speed test equipment, network-interface controllers, and embedded accelerator platforms. In each case, the 162,240 logic cells and 11,700 Kb of block RAM allow substantial parallel workloads to be consolidated into one programmable device. The 23 mm by 23 mm FCBGA-484 footprint supports dense, high-pin-count implementations but demands advanced board assembly capability and careful thermal validation.

For a new board, verify the selected device speed grade, industrial temperature grade, and package variant against the required clocking, transceiver, and I/O standards. Because the -2L grade emphasizes reduced power characteristics, evaluate both static and dynamic power at the intended operating voltage and temperature. Use the AMD Kintex-7 datasheet and package pinout for power rails, configuration pins, package balls, and decoupling requirements before releasing the PCB.

This product page consolidates the key device identity, resource, package, comparison, and sourcing information into an engineer-oriented reference. It also identifies same-footprint Kintex-7 alternatives and organizes replacement choices by speed grade, temperature grade, and application constraints rather than presenting every differently packaged FPGA as a drop-in equivalent.

直接替換替代品,適用於 XC7K160T-L2FBG484E — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: XC7K160T-L2FBG484E (相同外形與佔位) — 差異在於 Speed Grade, Temperature Grade, Device Type, Package, Package Type.

AMD
Speed Grade: -1
Package: FBG484 flip-chip BGA, 484 balls
比較對象 XC7K160T-L2FBG484E →
AMD
Speed Grade: -1
Temperature Grade: Industrial
Device Type: Field Programmable Gate Array (FPGA)
比較對象 XC7K160T-L2FBG484E →
AMD
Speed Grade: -2
Device Type: Field Programmable Gate Array (FPGA)
Package Type: 484-BBGA FCBGA
比較對象 XC7K160T-L2FBG484E →
AMD
Speed Grade: -2
Temperature Grade: I (industrial)
Package Type: 484-ball FCBGA
比較對象 XC7K160T-L2FBG484E →
AMD
Speed Grade: -3
Temperature Grade: Extended (E)
Device Type: Kintex-7 FPGA
比較對象 XC7K160T-L2FBG484E →

XC7K160T-3FBG484E

✅ 直接替換
AMD
📦 FCBGA-484
Kintex-7 FPGA · 162,240 cells · 11,700 Kb · 600 slices · 285 I/O · 28 nm · 1 V · -3

聯絡詢價

查看資料表 →

XC7K160T-2FBG484I

✅ 直接替換
AMD
📦 FCBGA-484
Kintex-7 field-programmable gate array (FPGA) · 162,240 cells · 28 nm · 1 V · 285 I/O · 484-ball FCBGA · 484-BBGA · -2

聯絡詢價

查看資料表 →

XC7K160T-2FBG484C

✅ 直接替換
AMD
📦 FCBGA-484
Kintex-7 · 162,240 cells · 28 nm · 1 V · -2 · 185 I/O · 484-BBGA FCBGA · 484 balls

聯絡詢價

查看資料表 →

XC7K160T-1FBG484I

✅ 直接替換 ⚠️ 規格未經驗證
AMD
📦 FCBGA-484
Kintex-7 · 162,240 cells · Field Programmable Gate Array (FPGA) · 28 nm · 484-ball FCBGA · 484 pins · 185 I/O · 0.97 V to 1.03 V

聯絡詢價

查看資料表 →

XC7K160T-1FBG484C

✅ 直接替換 ⚠️ 規格未經驗證
AMD
📦 FCBGA-484
Kintex-7 · 162,240 cells · 11,700 Kb · 285 I/O · FBG484 flip-chip BGA, 484 balls · Surface mount · -1 · Commercial

聯絡詢價

查看資料表 →

XC7K160T-L2FBG484E 最大額定值與電氣特性

Device Type Kintex-7 Field-Programmable Gate Array (FPGA)
Logic Cells 162,240 cells
Block RAM 11,700 Kb
User I/O 285 I/O
Device Family Kintex-7
Speed Grade -2L
Temperature Grade E
Package Type 484-pin FCBGA
Package Dimensions 23 mm × 23 mm
安裝類型 Surface Mount
Available Kintex-7 Speed Grades -3, -2, -1, -1L, and -2L
Performance Rank -3 is the highest-performance speed grade
Power Characteristic -2L grade is screened for lower maximum static power
RoHS 狀態 Compliant

XC7K160T-L2FBG484E 23 mm × 23 mm 腳位配置指南

XC7K160T-L2FBG484E(23 mm × 23 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

XC7K160T-L2FBG484E 的 23 mm × 23 mm 封裝腳位圖

無詳細腳位定義資料: XC7K160T-L2FBG484E.

請參閱 資料表 以查看完整腳位配置。

典型應用

XC7K160T-L2FBG484E 適用於 6 應用s: Communications and Signal Processing, Industrial Vision and Machine Inspection, Radar and Defense Signal Processing, High-Speed Test and Measurement, Network Interface and Packet Acceleration, Embedded Control and Data Acquisition.

🌐

Communications and Signal Processing

The XC7K160T-L2FBG484E fits communications equipment requiring parallel filters, symbol processing, timing recovery, and protocol handling. Its 162,240 logic cells and 11,700 Kb of block RAM allow multiple data paths to operate concurrently without relying on a sequential processor for every operation. The -2L grade is particularly relevant when a design must balance throughput against static power in a dense FCBGA-484 implementation. Engineers should use the AMD Kintex-7 documentation to confirm transceiver availability, clocking limits, and I/O performance for the selected interface rates.

🏭

Industrial Vision and Machine Inspection

The XC7K160T-L2FBG484E can support parallel image acquisition, preprocessing, feature extraction, and control in industrial vision systems. The 285 I/O provide substantial connectivity for cameras, sensors, memory, and actuators, while 11,700 Kb of block RAM accommodates line buffers and multi-stage processing pipelines. Its programmable architecture allows algorithms to be revised without changing the PCB. For factory equipment, confirm the selected E temperature grade, power budget, and enclosure thermal performance against the operating environment before production release.

✈️

Radar and Defense Signal Processing

The XC7K160T-L2FBG484E is applicable to radar, electronic warfare, and other high-throughput signal-processing platforms that benefit from parallel FPGA logic. Its 162,240 logic cells can host multiple filtering, correlation, spectral-analysis, and control pipelines, while 11,700 Kb of block RAM supports sample storage and buffering. The -2L grade offers a lower-power-oriented option within the Kintex-7 family. Qualification, radiation, security, extended-temperature, and obsolescence requirements must be evaluated separately for each defense program.

🖥️

High-Speed Test and Measurement

The XC7K160T-L2FBG484E fits modular test equipment that performs real-time pattern generation, acquisition, analysis, and protocol conditioning. Parallel programmable logic can accelerate decision trees, correlation, error detection, and statistical processing, while block RAM supports wide sample buffers. The large 285-I/O count helps integrate multiple channels and control interfaces. Because the 484-contact FCBGA package is electrically and thermally demanding, performance validation should include signal-integrity measurements, power-integrity analysis, and an enclosure-level thermal test.

🌐

Network Interface and Packet Acceleration

The XC7K160T-L2FBG484E can implement high-throughput packet classification, buffering, compression, encryption, and traffic-management functions in FPGA-based networking equipment. The 162,240 logic cells and 11,700 Kb of block RAM enable parallel lookup and data-plane pipelines, while 285 I/O support external memory and physical-layer interfaces. The -2L grade is useful where lower static power matters in densely populated communications chassis. Designers should evaluate board-level signal integrity, memory timing, thermal rise, and exact interface specifications before selecting the final speed grade.

🧩

Embedded Control and Data Acquisition

The XC7K160T-L2FBG484E supports embedded control systems that combine real-time acquisition, sequencing, protocol conversion, and decision logic in one programmable device. The 11,700 Kb of block RAM can hold acquisition and processing buffers, while 285 I/O connect sensors, converters, memory, and communications. Its programmable nature permits algorithm and interface updates during development. The engineering trade-off is package complexity: the FCBGA-484 footprint requires fine-pitch assembly, careful decoupling, and deliberate thermal design rather than a simple two-layer implementation.

What is the AMD XC7K160T-L2FBG484E?
The AMD XC7K160T-L2FBG484E is a Kintex-7 FPGA with 162,240 logic cells, 11,700 Kb of block RAM, and 285 I/O in a 484-pin FCBGA package. According to the AMD Kintex-7 datasheet, the -2L grade is intended for lower static-power operation than the standard -2 grade. It is designed for parallel DSP, programmable logic, high-speed interface, communications, instrumentation, and embedded processing applications.
What are the key specifications of XC7K160T-L2FBG484E that engineers should know?
The XC7K160T-L2FBG484E provides 162,240 logic cells, 11,700 Kb of block RAM, and 285 I/O in a 23 mm by 23 mm FCBGA-484 package. Its -2L speed designation emphasizes lower maximum static power, while the E suffix identifies the temperature-grade option. According to the AMD Kintex-7 datasheet, this device belongs to a family offered in -3, -2, -1, -1L, and -2L speed grades.
Where can I download the XC7K160T datasheet PDF?
The XC7K160T datasheet PDF can be downloaded from the AMD Kintex-7 documentation linked on this page or through the linked LCSC-hosted copy of the manufacturer document. The Kintex-7 family datasheet covers device resources, speed grades, electrical characteristics, packages, configuration, and application information. Engineers should also consult the package-specific pinout before assigning power, configuration, clock, and general-purpose I/O connections.
Where can I find the XC7K160T-L2FBG484E pinout?
The XC7K160T-L2FBG484E pinout is found in the package pin table for the FBG484 package in the AMD Kintex-7 documentation. The device uses a 484-contact FCBGA arrangement, so the ball map must be handled with the same care as a fine-pitch BGA. Confirm the exact -2L, E-grade ordering code against the package drawing and pin table before assigning any power, configuration, clock, or transceiver connections.
What is the difference between the XC7K160T-2FBG484E and XC7K160T-3FBG484E?
The primary difference is speed grade: the XC7K160T-3FBG484E is the -3 grade, while the XC7K160T-L2FBG484E uses the lower-power -2L grade. The AMD Kintex-7 datasheet identifies -3 as the highest-performance grade and describes -2L devices as screened for lower maximum static power. Both listings identify the FBG484 package with 162,240 logic cells and 285 I/O, but final timing, power, and qualification requirements should govern the selection.
Is XC7K160T-L2FBG484E suitable for high-speed signal processing?
Yes, the XC7K160T-L2FBG484E is suitable for parallel signal-processing workloads that benefit from 162,240 logic cells, 11,700 Kb of block RAM, and 285 I/O. Its programmable architecture supports filters, transforms, packet processing, and control logic. Actual signal rate is a board- and design-dependent constraint, so verify transceiver, clock, I/O, and timing performance against the specific interfaces implemented in the final design.
What is the best drop-in replacement for XC7K160T-L2FBG484E?
The closest same-footprint choices are XC7K160T-3FBG484E, XC7K160T-2FBG484I, XC7K160T-2FBG484C, XC7K160T-1FBG484I, and XC7K160T-1FBG484C, all using the FBG484 package and the same Kintex-7 device organization. According to the AMD Kintex-7 datasheet, their meaningful differences are speed grade, low-power grade, and temperature grade. Verify timing closure, power limits, qualification, and production availability before substitution.
Can XC7K160T-2FBG484I replace XC7K160T-L2FBG484E?
The XC7K160T-2FBG484I can serve as a same-package alternative to the XC7K160T-L2FBG484E because both use the FBG484 package and the same Kintex-7 device family. The key distinction is grade: the replacement has the standard -2 speed designation and an I temperature suffix, while the target is the -2L low-power grade with an E suffix. Confirm static power, temperature range, timing constraints, and qualification before production use.
When should I choose XC7K160T-L2FBG484E over XC7K160T-3FBG484E?
Choose the XC7K160T-L2FBG484E when lower maximum static power is more important than obtaining the highest Kintex-7 performance. The AMD Kintex-7 datasheet describes -2L devices as lower-power alternatives to standard -2 devices and identifies -3 as the fastest grade. If the design must meet maximum timing at the highest performance grade, choose XC7K160T-3FBG484E instead after reviewing its speed, power, and thermal limits.
Where can I buy XC7K160T-L2FBG484E online?
Use the Request a Quote form on this page to request the AMD XC7K160T-L2FBG484E, current lead time, and quantity availability. The exact device is offered in a 484-pin FCBGA package with 162,240 logic cells and 285 I/O. A written quote helps confirm the correct -2L speed grade, E temperature grade, FBG484 package, and production requirements without relying on a generic FPGA inventory result.
What is the price of XC7K160T-L2FBG484E?
Pricing for the XC7K160T-L2FBG484E depends on quantity, availability, and delivery requirements. Use the Request a Quote form on this page for the current unit price and volume breaks for the exact MPN. Quote requests should state the required quantity, date code, target package, and acceptable lead time so the commercial response corresponds to the 484-pin FCBGA -2L E-grade device rather than another Kintex-7 configuration.
What is the lead time for XC7K160T-L2FBG484E?
The current lead time for XC7K160T-L2FBG484E should be confirmed through the Request a Quote form on this page. Lead time can change with quantity, market inventory, and factory scheduling, particularly for large FPGA orders. Include the required quantity, target date, and acceptable packaging configuration in the request. The part identity is the Kintex-7 -2L device with E temperature grade in the FBG484 package.
Is XC7K160T-L2FBG484E in stock?
Current XC7K160T-L2FBG484E inventory should be confirmed through the Request a Quote form on this page. The form allows the requested quantity and delivery date to be checked against the exact -2L E-grade FBG484 ordering code. Do not treat a generic Kintex-7 inventory indication as confirmation because speed grade, temperature grade, and package suffix must all match for a production procurement.
What can replace XC7K160T-L2FBG484E?
The most credible replacements are same-footprint Kintex-7 devices such as XC7K160T-3FBG484E, XC7K160T-2FBG484I, XC7K160T-2FBG484C, XC7K160T-1FBG484I, and XC7K160T-1FBG484C. According to the AMD Kintex-7 datasheet, the FBG484 organization remains constant across these options while speed and temperature grades change. No cross-manufacturer drop-in FPGA was established, so PCB reuse should be limited to the verified same-package family alternatives.
Is there an AMD cross-brand equivalent for XC7K160T-L2FBG484E?
No cross-brand drop-in equivalent was established for the XC7K160T-L2FBG484E. Unlike conventional logic ICs, FPGA alternatives generally require compatible configuration, memory interfaces, clocking, power architecture, high-speed I/O, pin mapping, and PCB stack-up rather than merely the same ball count. The practical path is to compare the verified same-package Kintex-7 speed and temperature grades, then confirm bitstream, timing, power, and thermal compatibility.
How does the XC7K160T-L2FBG484E compare with other Kintex-7 devices?
The XC7K160T-L2FBG484E uses the -2L grade, which the AMD Kintex-7 datasheet associates with lower maximum static power, while the -3 grade prioritizes peak performance and the standard -2 grade provides an intermediate timing option. Across the XC7K160T-3FBG484E, -2FBG484I, -2FBG484C, -1FBG484I, and -1FBG484C alternatives, logic density and FBG484 footprint remain consistent while speed and temperature requirements determine suitability.

工程參考資料,適用於 XC7K160T-L2FBG484E — 比較、設計指引及合規資訊。

選型指南

Choose the XC7K160T-L2FBG484E when the design values lower static-power behavior and needs a complete 162,240-logic-cell Kintex-7 implementation in the FBG484 package. Select XC7K160T-3FBG484E when maximum performance is more important than the lower-power orientation of the -2L grade. Choose XC7K160T-2FBG484I or XC7K160T-2FBG484C when the required environment or sourcing configuration calls for the standard -2 grade, after checking timing and power. XC7K160T-1FBG484I and XC7K160T-1FBG484C remain same-footprint choices for -1-grade requirements, but the reduced timing position can change system timing closure. No cross-brand drop-in alternative was established because FPGA replacement requires compatible configuration, memory, clocking, I/O, power, and board-level interfaces, not just matching package dimensions.

與替代品比較

參數 本產品 XC7K160T-3FBG484E XC7K160T-2FBG484I XC7K160T-2FBG484C XC7K160T-1FBG484I XC7K160T-1FBG484C
Brand AMD AMD AMD AMD AMD AMD
Package FCBGA-484, 23 mm × 23 mm FCBGA-484, 23 mm × 23 mm FCBGA-484, 23 mm × 23 mm FCBGA-484, 23 mm × 23 mm FCBGA-484, 23 mm × 23 mm FCBGA-484, 23 mm × 23 mm
Speed Grade -2L -3 -2 -2 -1 -1
Temperature Grade Suffix E E I C I C
Power Orientation -2L lower-static-power grade -3 highest-performance grade Standard -2 grade Standard -2 grade -1 grade -1 grade

主要差異化特點

  • Lower-power-oriented speed designation (對比XC7K160T-3FBG484E)
  • Same-footprint grade flexibility (對比XC7K160T-2FBG484I)
  • Power-oriented selection within the same performance family (對比XC7K160T-1FBG484I)

設計說明

Treat the XC7K160T-L2FBG484E as a multi-rail, high-pin-count device. Assign VCCINT, VCCAUX, VCCBRAM, and other applicable supplies exactly as defined in the AMD Kintex-7 package pinout, and connect every designated supply ball directly to the appropriate plane. Place the required bulk and high-frequency decoupling capacitors at the nearest package balls, maintain short return paths, and keep uninterrupted supply planes beneath the device. Verify power sequencing and rail tolerances before programming the FPGA.

Estimated: thermal performance depends on board construction, airflow, copper area, and the actual power budget. Compare estimated junction temperature against the device limit using the power dissipated by the selected -2L configuration and the AMD-specified thermal model for FBG484. Provide thermal vias and copper spreading around the package, validate with a populated board, and avoid relying on package exposure alone as a heat sink. Final thermal margins require measured or formally simulated ambient and airflow conditions.

The FCBGA-484 footprint requires controlled escape routing and careful reference-plane continuity. Follow the manufacturer package drawing for ball locations, solder-mask and paste-land geometry, via-in-pad policy, and assembly requirements. Match high-speed differential pairs with continuous reference planes, avoid stubs, control length skew to the applicable interface specification, and provide an unobstructed return path beneath every high-speed transition. Defer final escape geometry to the AMD-recommended footprint and the board factory's assembly capability.

Validate configuration, clock, memory, and high-speed I/O interfaces at the intended data rates rather than relying only on simulation at the FPGA pins. Budget external clock jitter, package and board loss, connector or trace discontinuities, return-path discontinuities, and crosstalk into the timing margin. Use the same package and grade assumptions from the AMD documentation during simulation, and preserve configuration access for diagnosis. Because alternate Kintex-7 speed grades can alter timing margins, rerun sign-off after any grade substitution.

合規資訊

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The linked LCSC product listing identifies the XC7K160T-L2FBG484E as RoHS compliant. No separate REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status was identified.

資料驗證日期: 2026-11-18 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

xc7k160t 2fbg484i xc7k160t 2fbg484c xc7k160t 1fbg676c xc7k160t 2fbg676i xc7k160t ffg676 xc7k160t datasheet XC7K160T-L2FBG484E pinout XC7K160T-L2FBG484E datasheet PDF XC7K160T-L2FBG484E equivalent XC7K160T-L2FBG484E replacement XC7K160T-L2FBG484E FCBGA-484 footprint AMD XC7K160T-L2FBG484E

相關元件與詞彙

AMD XC7K160T-L2FBG484E XC7K160T-3FBG484E XC7K160T-2FBG484I XC7K160T-2FBG484C XC7K160T-1FBG484I XC7K160T-1FBG484C Kintex-7 FPGA field-programmable gate array programmable logic logic cell block RAM DSP high-speed serial transceiver FCBGA-484 BGA surface-mount package SMD -2L speed grade static power dynamic power RoHS FPGA bitstream FCBGA-484 pinout
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情