XC7K160T-L2FBG484E - Low-Power Kintex-7 FPGA | AMD
Артикул: XC7K160T-L2FBG484E ✓ АктивенXC7K160T-L2FBG484E Обзор
A Kintex-7 FPGA belongs to the programmable-logic hierarchy, where an FPGA is a semiconductor containing configurable logic blocks, memory, and routing resources. These resources form parallel processing, interface, and signal-processing circuits after the device is programmed. Compared with application-specific standard logic, an FPGA supports field upgrades, hardware parallelism, and product differentiation without requiring a new ASIC fabrication run. Kintex-7 devices occupy the middle of the AMD Xilinx product range between lower-cost Artix-7 and higher-density Virtex-7 families.
The principal device resources include 162,240 logic cells and 11,700 Kb of block RAM. The 285 available I/O support connections to memory, converters, network transceivers, clocks, and external control logic. The -2L operating designation identifies the lower-power family variant rather than the standard -2 device. This makes the part suitable for systems that require substantial parallel processing while balancing performance, thermal design, and power consumption across industrial, communications, instrumentation, and defense-oriented equipment.
The FPGA architecture combines programmable logic with dedicated DSP and memory resources, enabling fixed- or floating-point pipelines, digital filtering, modulation, protocol handling, and high-throughput data movement. Its large 484-contact FCBGA package also creates a demanding PCB-layout environment: high-speed differential pairs, multiple supply rails, exposed thermal requirements, and numerous decoupling connections must be planned together. Designers should treat power distribution, via current capacity, return-path continuity, and thermal dissipation as part of the FPGA design rather than as after-the-fact PCB details.
Typical uses include telecommunications line cards, industrial vision, radar and signal-processing front ends, high-speed test equipment, network-interface controllers, and embedded accelerator platforms. In each case, the 162,240 logic cells and 11,700 Kb of block RAM allow substantial parallel workloads to be consolidated into one programmable device. The 23 mm by 23 mm FCBGA-484 footprint supports dense, high-pin-count implementations but demands advanced board assembly capability and careful thermal validation.
For a new board, verify the selected device speed grade, industrial temperature grade, and package variant against the required clocking, transceiver, and I/O standards. Because the -2L grade emphasizes reduced power characteristics, evaluate both static and dynamic power at the intended operating voltage and temperature. Use the AMD Kintex-7 datasheet and package pinout for power rails, configuration pins, package balls, and decoupling requirements before releasing the PCB.
This product page consolidates the key device identity, resource, package, comparison, and sourcing information into an engineer-oriented reference. It also identifies same-footprint Kintex-7 alternatives and organizes replacement choices by speed grade, temperature grade, and application constraints rather than presenting every differently packaged FPGA as a drop-in equivalent.
Аналоги без доработки для XC7K160T-L2FBG484E — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с XC7K160T-L2FBG484E (тот же форм-фактор и посадочное место) — отличается по Speed Grade, Temperature Grade, Device Type, Package, Package Type.
XC7K160T-3FBG484E
✅ Прямая заменаУточнить цену
Открыть даташит →XC7K160T-2FBG484I
✅ Прямая заменаУточнить цену
Открыть даташит →XC7K160T-2FBG484C
✅ Прямая заменаУточнить цену
Открыть даташит →XC7K160T-1FBG484I
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →XC7K160T-1FBG484C
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →XC7K160T-L2FBG484E Максимальные параметры и электрические характеристики
| Device Type | Kintex-7 Field-Programmable Gate Array (FPGA) |
| Logic Cells | 162,240 cells |
| Block RAM | 11,700 Kb |
| User I/O | 285 I/O |
| Device Family | Kintex-7 |
| Speed Grade | -2L |
| Temperature Grade | E |
| Package Type | 484-pin FCBGA |
| Package Dimensions | 23 mm × 23 mm |
| Тип монтажа | Surface Mount |
| Available Kintex-7 Speed Grades | -3, -2, -1, -1L, and -2L |
| Performance Rank | -3 is the highest-performance speed grade |
| Power Characteristic | -2L grade is screened for lower maximum static power |
| Статус RoHS | Compliant |
Руководство по цоколевке XC7K160T-L2FBG484E в корпусе 23 mm × 23 mm
Цоколевка для XC7K160T-L2FBG484E (корпус 23 mm × 23 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для XC7K160T-L2FBG484E.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
XC7K160T-L2FBG484E подходит для 6 применениеs: Communications and Signal Processing, Industrial Vision and Machine Inspection, Radar and Defense Signal Processing, High-Speed Test and Measurement, Network Interface and Packet Acceleration, Embedded Control and Data Acquisition.
Communications and Signal Processing
The XC7K160T-L2FBG484E fits communications equipment requiring parallel filters, symbol processing, timing recovery, and protocol handling. Its 162,240 logic cells and 11,700 Kb of block RAM allow multiple data paths to operate concurrently without relying on a sequential processor for every operation. The -2L grade is particularly relevant when a design must balance throughput against static power in a dense FCBGA-484 implementation. Engineers should use the AMD Kintex-7 documentation to confirm transceiver availability, clocking limits, and I/O performance for the selected interface rates.
Рекомендуется
Industrial Vision and Machine Inspection
The XC7K160T-L2FBG484E can support parallel image acquisition, preprocessing, feature extraction, and control in industrial vision systems. The 285 I/O provide substantial connectivity for cameras, sensors, memory, and actuators, while 11,700 Kb of block RAM accommodates line buffers and multi-stage processing pipelines. Its programmable architecture allows algorithms to be revised without changing the PCB. For factory equipment, confirm the selected E temperature grade, power budget, and enclosure thermal performance against the operating environment before production release.
Рекомендуется
Radar and Defense Signal Processing
The XC7K160T-L2FBG484E is applicable to radar, electronic warfare, and other high-throughput signal-processing platforms that benefit from parallel FPGA logic. Its 162,240 logic cells can host multiple filtering, correlation, spectral-analysis, and control pipelines, while 11,700 Kb of block RAM supports sample storage and buffering. The -2L grade offers a lower-power-oriented option within the Kintex-7 family. Qualification, radiation, security, extended-temperature, and obsolescence requirements must be evaluated separately for each defense program.
Рекомендуется
High-Speed Test and Measurement
The XC7K160T-L2FBG484E fits modular test equipment that performs real-time pattern generation, acquisition, analysis, and protocol conditioning. Parallel programmable logic can accelerate decision trees, correlation, error detection, and statistical processing, while block RAM supports wide sample buffers. The large 285-I/O count helps integrate multiple channels and control interfaces. Because the 484-contact FCBGA package is electrically and thermally demanding, performance validation should include signal-integrity measurements, power-integrity analysis, and an enclosure-level thermal test.
Рекомендуется
Network Interface and Packet Acceleration
The XC7K160T-L2FBG484E can implement high-throughput packet classification, buffering, compression, encryption, and traffic-management functions in FPGA-based networking equipment. The 162,240 logic cells and 11,700 Kb of block RAM enable parallel lookup and data-plane pipelines, while 285 I/O support external memory and physical-layer interfaces. The -2L grade is useful where lower static power matters in densely populated communications chassis. Designers should evaluate board-level signal integrity, memory timing, thermal rise, and exact interface specifications before selecting the final speed grade.
Рекомендуется
Embedded Control and Data Acquisition
The XC7K160T-L2FBG484E supports embedded control systems that combine real-time acquisition, sequencing, protocol conversion, and decision logic in one programmable device. The 11,700 Kb of block RAM can hold acquisition and processing buffers, while 285 I/O connect sensors, converters, memory, and communications. Its programmable nature permits algorithm and interface updates during development. The engineering trade-off is package complexity: the FCBGA-484 footprint requires fine-pitch assembly, careful decoupling, and deliberate thermal design rather than a simple two-layer implementation.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для XC7K160T-L2FBG484E — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | XC7K160T-3FBG484E | XC7K160T-2FBG484I | XC7K160T-2FBG484C | XC7K160T-1FBG484I | XC7K160T-1FBG484C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FCBGA-484, 23 mm × 23 mm | FCBGA-484, 23 mm × 23 mm | FCBGA-484, 23 mm × 23 mm | FCBGA-484, 23 mm × 23 mm | FCBGA-484, 23 mm × 23 mm | FCBGA-484, 23 mm × 23 mm |
| Speed Grade | -2L | -3 | -2 | -2 | -1 | -1 |
| Temperature Grade Suffix | E | E | I | C | I | C |
| Power Orientation | -2L lower-static-power grade | -3 highest-performance grade | Standard -2 grade | Standard -2 grade | -1 grade | -1 grade |
Ключевые отличия
- Lower-power-oriented speed designation (против XC7K160T-3FBG484E)
- Same-footprint grade flexibility (против XC7K160T-2FBG484I)
- Power-oriented selection within the same performance family (против XC7K160T-1FBG484I)
Заметки по проектированию
Treat the XC7K160T-L2FBG484E as a multi-rail, high-pin-count device. Assign VCCINT, VCCAUX, VCCBRAM, and other applicable supplies exactly as defined in the AMD Kintex-7 package pinout, and connect every designated supply ball directly to the appropriate plane. Place the required bulk and high-frequency decoupling capacitors at the nearest package balls, maintain short return paths, and keep uninterrupted supply planes beneath the device. Verify power sequencing and rail tolerances before programming the FPGA.
Estimated: thermal performance depends on board construction, airflow, copper area, and the actual power budget. Compare estimated junction temperature against the device limit using the power dissipated by the selected -2L configuration and the AMD-specified thermal model for FBG484. Provide thermal vias and copper spreading around the package, validate with a populated board, and avoid relying on package exposure alone as a heat sink. Final thermal margins require measured or formally simulated ambient and airflow conditions.
The FCBGA-484 footprint requires controlled escape routing and careful reference-plane continuity. Follow the manufacturer package drawing for ball locations, solder-mask and paste-land geometry, via-in-pad policy, and assembly requirements. Match high-speed differential pairs with continuous reference planes, avoid stubs, control length skew to the applicable interface specification, and provide an unobstructed return path beneath every high-speed transition. Defer final escape geometry to the AMD-recommended footprint and the board factory's assembly capability.
Validate configuration, clock, memory, and high-speed I/O interfaces at the intended data rates rather than relying only on simulation at the FPGA pins. Budget external clock jitter, package and board loss, connector or trace discontinuities, return-path discontinuities, and crosstalk into the timing margin. Use the same package and grade assumptions from the AMD documentation during simulation, and preserve configuration access for diagnosis. Because alternate Kintex-7 speed grades can alter timing margins, rerun sign-off after any grade substitution.
Информация о соответствии
The linked LCSC product listing identifies the XC7K160T-L2FBG484E as RoHS compliant. No separate REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status was identified.