Z86E3016SEC - 8-Bit 16MHz OTP Microcontroller | Zilog
MPN: Z86E3016SEC ✓ 啟用中Z86E3016SEC 概覽
An 8-bit microcontroller is a compact computing device that integrates a processor core, program memory, data memory, and peripheral functions onto one integrated circuit. The Z8 family belongs to the broader embedded-controller hierarchy, where an MCU executes firmware for sensing, control, communications, and user-interface functions. Compared with a field-programmable controller, the one-time-programmable ROM in Z86E3016SEC is intended for final program loading during production, providing a simple method for controlling the programmed contents of each device.
The principal operating characteristics of Z86E3016SEC include its 8-bit architecture, 16 MHz clock rating, 4 KB OTP program storage, and 5 V supply. These specifications make the device appropriate for compact controllers whose workload does not require a high-performance 16-bit or 32-bit processor. The 28-pin SOIC package provides a conventional surface-mount format suitable for automated assembly and PCB integration.
The Z86E3016SEC belongs to the Zilog Z8 family of 8-bit CISC microcontrollers. Its 4 KB of OTP memory gives a production designer enough space for small embedded programs, while the 16 MHz operating rating supports responsive sequential control. Because OTP memory cannot be rewritten after programming, the device is best suited to products whose firmware and configuration are stable during manufacturing rather than applications that require frequent in-field firmware updates.
Typical applications include appliance controllers, compact industrial automation modules, environmental monitoring equipment, simple serial-interface products, embedded access-control terminals, and dedicated control panels. In each case, the MCU can execute a fixed control routine while coordinating inputs, outputs, and communication tasks. The -40°C to 105°C rating broadens its suitability for equipment deployed in environments where consumer-grade components may be unsuitable.
Design planning should begin with the 5 V supply requirement and the 28-pin footprint. Confirm pin assignments, oscillator requirements, programming procedure, and reset behavior against the Zilog manufacturer datasheet before layout release. Because the program memory is one-time programmable, firmware validation, programming fixtures, traceability, and production provisioning must be completed before the devices are placed into finished assemblies.
This page consolidates the core Z86E3016SEC electrical and packaging characteristics, identifies documented same-footprint alternatives, and provides practical selection guidance for designers evaluating the Z8 OTP MCU for compact embedded-control products.
直接替換替代品,適用於 Z86E3016SEC — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: Z86E3016SEC (相同外形與佔位) — 差異在於 Product Type, Program Memory Size, Program Memory Type, Supply Voltage.
Z86E3016SEG
✅ 直接替換聯絡詢價
查看資料表 →Z86E3016SSC
✅ 直接替換📋 參考替代品(不在目錄中)
Z86E3016SSG
✅ 直接替換聯絡詢價
查看資料表 →Z86E3016SEC 最大額定值與電氣特性
| Microcontroller Type | 8-bit Z8 CISC microcontroller |
| Operating Frequency | 16 MHz |
| Program Memory Type | One-time programmable ROM |
| Program Memory Size | 4 KB (4K x 8) |
| 供應電壓 | 5 V |
| 封裝 | 28-pin SOIC |
| Package Style | Small outline |
| Package Height | 2.64 mm |
| 工作溫度 | -40°C to 105°C |
| Terminal Count | 28 |
| 安裝類型 | Surface mount |
| Architecture | CISC |
| Product Family | Z8 |
| Manufacturer | Zilog, Inc. |
Z86E3016SEC 2.64 mm 腳位配置指南
Z86E3016SEC(2.64 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: Z86E3016SEC.
請參閱 資料表 以查看完整腳位配置。
典型應用
Z86E3016SEC 適用於 6 應用s: Small Appliance Control, Industrial Monitoring Module, Environmental Sensor Controller, Serial Interface Controller, Access-Control Terminal, Dedicated Control Panel.
Small Appliance Control
Z86E3016SEC fits a compact appliance controller when the product uses fixed production firmware and requires an 8-bit processor rather than a higher-performance MCU. Its 16 MHz operating frequency provides the core execution rate, while 4 KB of OTP ROM accommodates a focused control program. The 5 V supply and -40°C to 105°C operating range are suitable for many indoor appliance environments. Because program memory is one-time programmable, appliance designs should complete firmware validation before production programming. Pin allocation, reset behavior, oscillator requirements, and available I/O functions should be confirmed from the Zilog manufacturer datasheet before PCB release.
推薦
Industrial Monitoring Module
Z86E3016SEC can serve as the control processor in a compact industrial monitoring module that samples sensors, evaluates operating states, and drives local indicators or communications circuitry. Its 8-bit CISC architecture is appropriate for deterministic supervisory tasks, and the 16 MHz rating provides the stated processor operating frequency. The -40°C to 105°C range supports equipment installed in extended-temperature industrial environments. Designers should calculate worst-case processing time and confirm that the 4 KB OTP program space accommodates the final monitoring and communications firmware. The 5 V supply architecture also requires regulators and filtering selected for the module's power-quality requirements.
推薦
Environmental Sensor Controller
Z86E3016SEC is suitable for an environmental sensor node that periodically reads measurements, applies threshold logic, and reports status through a simple serial interface. The 4 KB OTP program memory allows a production firmware image to be stored permanently, avoiding the need for external nonvolatile program memory in a small controller. Its 16 MHz operating rate supports the sequential control workload, while the 28-pin SOIC package is practical for conventional surface-mount assembly. The 5 V supply and -40°C to 105°C range are useful for protected sensing equipment. Final validation must include sensor timing, standby behavior, communication baud rate, and power-consumption measurements.
推薦
Serial Interface Controller
Z86E3016SEC can be used in a dedicated serial-interface controller where one embedded processor must coordinate a protocol, maintain timing, and exchange commands with another circuit. The MCU's 8-bit Z8 CISC architecture and 16 MHz operating frequency align with straightforward command-processing and state-machine workloads. A 4 KB OTP program store is suitable when the firmware is finalized during manufacturing and field updates are unnecessary. The 28-pin SOIC package leaves a defined PCB footprint for the Z8 family, while the 5 V supply can support interface circuitry designed around the same rail. Confirm the exact serial peripheral, pin multiplexing, oscillator configuration, and timing limits in the Zilog manufacturer datasheet.
推薦
Access-Control Terminal
Z86E3016SEC can support a compact access-control terminal that reads credentials, evaluates local permission logic, drives a lock or indicator, and records a limited event state. A 16 MHz 8-bit processor is appropriate for these coordinated control functions, and 4 KB of OTP ROM provides storage for a fixed terminal program. The -40°C to 105°C range allows deployment in protected indoor equipment where temperature varies over time. Because OTP prevents field reprogramming, changes to credential formats or operating rules require a controlled product revision and manufacturing update. Validate pin multiplexing, memory timing, security requirements, and supply-voltage tolerances before using the controller in an access-control design.
推薦
Dedicated Control Panel
Z86E3016SEC is appropriate for a dedicated control panel that coordinates switches, indicators, timing, and a limited operator interface. Its 8-bit architecture handles sequential control logic without requiring a larger processor, while the 16 MHz operating frequency and 4 KB OTP memory define the core resources for a focused embedded program. The 28-pin SOIC package supports automated surface-mount assembly, and the -40°C to 105°C range covers many deployed control-panel environments. Panel engineers should confirm the available I/O count and multiplexing, evaluate startup and reset timing, and test the 5 V rail under the final load profile. Firmware must be fully qualified because the OTP program memory cannot be changed after programming.
推薦
推薦產品摘要
工程參考資料,適用於 Z86E3016SEC — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | Z86E3016SEG | Z86E3016SSC | Z86E3016SSG |
|---|---|---|---|---|
| Package | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC |
| Brand | Zilog, Inc. | Zilog, Inc. | Zilog, Inc. | Zilog, Inc. |
| Processor Architecture | 8-bit Z8 CISC | 8-bit Z8 CISC | 8-bit Z8 CISC | 8-bit Z8 CISC |
| Operating Frequency | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Terminal Count | 28 | 28 | 28 | 28 |
| Special Characteristics | One-time programmable program memory | One-time programmable program memory | One-time programmable program memory | One-time programmable program memory |
主要差異化特點
- Exact approved ordering configuration (對比Z86E3016SEG)
- Same-footprint migration without board changes (對比Z86E3016SSC)
- Package-compatible sourcing option (對比Z86E3016SSG)
設計說明
Treat OTP programming as a production milestone rather than a late debugging step. Validate the final firmware image, configuration values, checksum or signature procedure, and programming fixture before releasing devices. Because the program memory cannot be rewritten after programming, a rejected unit generally cannot be corrected by reflashing. Maintain lot and programming traceability so each installed device can be associated with its approved firmware version.
Use the manufacturer pin-description table to assign the 28-pin SOIC footprint and verify every power, ground, clock, programming, reset, input, and output connection. Place required decoupling capacitors close to their associated supply pins and route oscillator or programming signals away from sensitive inputs. The 28-pin SOIC dimensions and terminal numbering must match the selected board footprint; verify them mechanically rather than relying on a generic package drawing.
Design the 5 V supply rail to remain within the electrical limits listed for the device and to remain stable during startup, reset, and maximum operating activity. Check supply tolerance, transient response, and current margin against the final load and any attached peripherals. If the product derives 5 V from another rail, include regulation margin for temperature, component tolerance, and worst-case load rather than relying on a nominal supply value alone.
Use the -40°C to 105°C operating range as an environmental screening limit, but also evaluate the temperature at the device in its final enclosure. Compute worst-case internal dissipation from the actual supply and load conditions, then apply the package thermal information from the manufacturer datasheet. Keep the MCU away from heat-generating components when possible and provide copper area consistent with the recommended land pattern and assembly guidance.
合規資訊
RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status are not stated in the listed product records. Confirm current declarations with Zilog before environmental or automotive qualification.