Z86E3016SEC - 8-Bit 16MHz OTP Microcontroller | Zilog
料号: Z86E3016SEC ✓ 量产中Z86E3016SEC 概述
An 8-bit microcontroller is a compact computing device that integrates a processor core, program memory, data memory, and peripheral functions onto one integrated circuit. The Z8 family belongs to the broader embedded-controller hierarchy, where an MCU executes firmware for sensing, control, communications, and user-interface functions. Compared with a field-programmable controller, the one-time-programmable ROM in Z86E3016SEC is intended for final program loading during production, providing a simple method for controlling the programmed contents of each device.
The principal operating characteristics of Z86E3016SEC include its 8-bit architecture, 16 MHz clock rating, 4 KB OTP program storage, and 5 V supply. These specifications make the device appropriate for compact controllers whose workload does not require a high-performance 16-bit or 32-bit processor. The 28-pin SOIC package provides a conventional surface-mount format suitable for automated assembly and PCB integration.
The Z86E3016SEC belongs to the Zilog Z8 family of 8-bit CISC microcontrollers. Its 4 KB of OTP memory gives a production designer enough space for small embedded programs, while the 16 MHz operating rating supports responsive sequential control. Because OTP memory cannot be rewritten after programming, the device is best suited to products whose firmware and configuration are stable during manufacturing rather than applications that require frequent in-field firmware updates.
Typical applications include appliance controllers, compact industrial automation modules, environmental monitoring equipment, simple serial-interface products, embedded access-control terminals, and dedicated control panels. In each case, the MCU can execute a fixed control routine while coordinating inputs, outputs, and communication tasks. The -40°C to 105°C rating broadens its suitability for equipment deployed in environments where consumer-grade components may be unsuitable.
Design planning should begin with the 5 V supply requirement and the 28-pin footprint. Confirm pin assignments, oscillator requirements, programming procedure, and reset behavior against the Zilog manufacturer datasheet before layout release. Because the program memory is one-time programmable, firmware validation, programming fixtures, traceability, and production provisioning must be completed before the devices are placed into finished assemblies.
This page consolidates the core Z86E3016SEC electrical and packaging characteristics, identifies documented same-footprint alternatives, and provides practical selection guidance for designers evaluating the Z8 OTP MCU for compact embedded-control products.
直接替换替代料: Z86E3016SEC ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: Z86E3016SEC (相同外形与封装尺寸) ——差异在于 Product Type, Program Memory Size, Program Memory Type, Supply Voltage.
Z86E3016SEG
✅ 直接替换联系询价
查看数据手册 →Z86E3016SSC
✅ 直接替换📋 参考替代料(不在目录中)
Z86E3016SSG
✅ 直接替换联系询价
查看数据手册 →Z86E3016SEC 最大额定值与电气特性
| Microcontroller Type | 8-bit Z8 CISC microcontroller |
| Operating Frequency | 16 MHz |
| Program Memory Type | One-time programmable ROM |
| Program Memory Size | 4 KB (4K x 8) |
| 电源电压 | 5 V |
| 封装 | 28-pin SOIC |
| Package Style | Small outline |
| Package Height | 2.64 mm |
| 工作温度 | -40°C to 105°C |
| Terminal Count | 28 |
| 安装类型 | Surface mount |
| Architecture | CISC |
| Product Family | Z8 |
| Manufacturer | Zilog, Inc. |
Z86E3016SEC 2.64 mm 引脚配置指南
Z86E3016SEC(2.64 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: Z86E3016SEC.
请参阅 数据手册 以查看完整引脚配置。
典型应用
Z86E3016SEC 适用于 6 应用s: Small Appliance Control, Industrial Monitoring Module, Environmental Sensor Controller, Serial Interface Controller, Access-Control Terminal, Dedicated Control Panel.
Small Appliance Control
Z86E3016SEC fits a compact appliance controller when the product uses fixed production firmware and requires an 8-bit processor rather than a higher-performance MCU. Its 16 MHz operating frequency provides the core execution rate, while 4 KB of OTP ROM accommodates a focused control program. The 5 V supply and -40°C to 105°C operating range are suitable for many indoor appliance environments. Because program memory is one-time programmable, appliance designs should complete firmware validation before production programming. Pin allocation, reset behavior, oscillator requirements, and available I/O functions should be confirmed from the Zilog manufacturer datasheet before PCB release.
推荐
Industrial Monitoring Module
Z86E3016SEC can serve as the control processor in a compact industrial monitoring module that samples sensors, evaluates operating states, and drives local indicators or communications circuitry. Its 8-bit CISC architecture is appropriate for deterministic supervisory tasks, and the 16 MHz rating provides the stated processor operating frequency. The -40°C to 105°C range supports equipment installed in extended-temperature industrial environments. Designers should calculate worst-case processing time and confirm that the 4 KB OTP program space accommodates the final monitoring and communications firmware. The 5 V supply architecture also requires regulators and filtering selected for the module's power-quality requirements.
推荐
Environmental Sensor Controller
Z86E3016SEC is suitable for an environmental sensor node that periodically reads measurements, applies threshold logic, and reports status through a simple serial interface. The 4 KB OTP program memory allows a production firmware image to be stored permanently, avoiding the need for external nonvolatile program memory in a small controller. Its 16 MHz operating rate supports the sequential control workload, while the 28-pin SOIC package is practical for conventional surface-mount assembly. The 5 V supply and -40°C to 105°C range are useful for protected sensing equipment. Final validation must include sensor timing, standby behavior, communication baud rate, and power-consumption measurements.
推荐
Serial Interface Controller
Z86E3016SEC can be used in a dedicated serial-interface controller where one embedded processor must coordinate a protocol, maintain timing, and exchange commands with another circuit. The MCU's 8-bit Z8 CISC architecture and 16 MHz operating frequency align with straightforward command-processing and state-machine workloads. A 4 KB OTP program store is suitable when the firmware is finalized during manufacturing and field updates are unnecessary. The 28-pin SOIC package leaves a defined PCB footprint for the Z8 family, while the 5 V supply can support interface circuitry designed around the same rail. Confirm the exact serial peripheral, pin multiplexing, oscillator configuration, and timing limits in the Zilog manufacturer datasheet.
推荐
Access-Control Terminal
Z86E3016SEC can support a compact access-control terminal that reads credentials, evaluates local permission logic, drives a lock or indicator, and records a limited event state. A 16 MHz 8-bit processor is appropriate for these coordinated control functions, and 4 KB of OTP ROM provides storage for a fixed terminal program. The -40°C to 105°C range allows deployment in protected indoor equipment where temperature varies over time. Because OTP prevents field reprogramming, changes to credential formats or operating rules require a controlled product revision and manufacturing update. Validate pin multiplexing, memory timing, security requirements, and supply-voltage tolerances before using the controller in an access-control design.
推荐
Dedicated Control Panel
Z86E3016SEC is appropriate for a dedicated control panel that coordinates switches, indicators, timing, and a limited operator interface. Its 8-bit architecture handles sequential control logic without requiring a larger processor, while the 16 MHz operating frequency and 4 KB OTP memory define the core resources for a focused embedded program. The 28-pin SOIC package supports automated surface-mount assembly, and the -40°C to 105°C range covers many deployed control-panel environments. Panel engineers should confirm the available I/O count and multiplexing, evaluate startup and reset timing, and test the 5 V rail under the final load profile. Firmware must be fully qualified because the OTP program memory cannot be changed after programming.
推荐
推荐产品汇总
工程参考数据: Z86E3016SEC ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | Z86E3016SEG | Z86E3016SSC | Z86E3016SSG |
|---|---|---|---|---|
| Package | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC | 28-pin SOIC |
| Brand | Zilog, Inc. | Zilog, Inc. | Zilog, Inc. | Zilog, Inc. |
| Processor Architecture | 8-bit Z8 CISC | 8-bit Z8 CISC | 8-bit Z8 CISC | 8-bit Z8 CISC |
| Operating Frequency | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Terminal Count | 28 | 28 | 28 | 28 |
| Special Characteristics | One-time programmable program memory | One-time programmable program memory | One-time programmable program memory | One-time programmable program memory |
关键差异点
- Exact approved ordering configuration (对比 Z86E3016SEG)
- Same-footprint migration without board changes (对比 Z86E3016SSC)
- Package-compatible sourcing option (对比 Z86E3016SSG)
设计说明
Treat OTP programming as a production milestone rather than a late debugging step. Validate the final firmware image, configuration values, checksum or signature procedure, and programming fixture before releasing devices. Because the program memory cannot be rewritten after programming, a rejected unit generally cannot be corrected by reflashing. Maintain lot and programming traceability so each installed device can be associated with its approved firmware version.
Use the manufacturer pin-description table to assign the 28-pin SOIC footprint and verify every power, ground, clock, programming, reset, input, and output connection. Place required decoupling capacitors close to their associated supply pins and route oscillator or programming signals away from sensitive inputs. The 28-pin SOIC dimensions and terminal numbering must match the selected board footprint; verify them mechanically rather than relying on a generic package drawing.
Design the 5 V supply rail to remain within the electrical limits listed for the device and to remain stable during startup, reset, and maximum operating activity. Check supply tolerance, transient response, and current margin against the final load and any attached peripherals. If the product derives 5 V from another rail, include regulation margin for temperature, component tolerance, and worst-case load rather than relying on a nominal supply value alone.
Use the -40°C to 105°C operating range as an environmental screening limit, but also evaluate the temperature at the device in its final enclosure. Compute worst-case internal dissipation from the actual supply and load conditions, then apply the package thermal information from the manufacturer datasheet. Keep the MCU away from heat-generating components when possible and provide copper area consistent with the recommended land pattern and assembly guidance.
合规信息
RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status are not stated in the listed product records. Confirm current declarations with Zilog before environmental or automotive qualification.