集成电路

XC7K420T-3FFG1156E

XC7K420T-3FFG1156E - Kintex-7 FPGA 416K Logic Cells | AMD

The AMD XC7K420T-3FFG1156E is a high-performance Kintex-7 Field Programmable Gate Array (FPGA) fabricated on a 28nm process technology. It features 416,960 logic cells, 32,575 Configurable Logic Blocks (CLBs), and 400 user I/O pins. The device is housed in a 1156-ball FCBGA package and operates from a 1V core supply. This FPGA is designed for high-bandwidth, high-capacity applications requiring significant logic density and DSP capabilities. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer or designer after manufacturing. FPGAs contain a matrix of programmable logic blocks, interconnects, and I/O blocks, allowing them to implement complex digital logic functions. They are a key component in the broader category of programmable logic devices, which also includes CPLDs and SoC FPGAs. FPGAs offer flexibility and parallel processing capabilities that are essential in modern electronic systems. Key features of the XC7K420T-3FFG1156E include 30,781,440 bits of block RAM, providing substantial on-chip storage for data buffering and processing. The device supports a wide range of I/O standards and includes high-speed serial transceivers for chip-to-chip and backplane communication. The -3 speed grade indicates the fastest performance tier available for this device, enabling higher clock frequencies and data rates. The Kintex-7 family is built on AMD's 28nm high-performance, low-power (HPL) process, balancing performance with power efficiency. The architecture includes dedicated DSP48E1 slices for high-speed arithmetic operations, and advanced clock management tiles (CMTs) for precise clock generation and distribution. This makes the device suitable for demanding signal processing and data-intensive tasks. Typical applications include high-performance computing, aerospace and defense systems, medical imaging, and wired communications infrastructure. The large logic capacity and high-speed transceivers make it ideal for implementing complex algorithms and high-throughput data paths. The 400 I/O pins provide ample connectivity for external memory interfaces and peripheral devices. When designing with this FPGA, careful attention must be paid to power supply decoupling and thermal management. The device requires multiple supply voltages, and proper sequencing is essential for reliable operation. The FCBGA package requires a multi-layer PCB with controlled impedance traces for high-speed signals.

USD $6,800.00 有现货

XC7K480T-1FFG901I

XC7K480T-1FFG901I - Kintex-7 FPGA 477K Logic Cells | AMD

The AMD XC7K480T-1FFG901I is a high-performance Kintex-7 Field Programmable Gate Array (FPGA) from the Kintex-7 family, offering 477,760 logic cells and 35,205,120 block RAM bits in a 900-ball FCBGA package. It provides 380 user I/O pins and operates over an industrial temperature range of -40°C to +100°C. This device is designed for high-bandwidth, high-capacity applications requiring significant logic density and DSP resources. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer or designer after manufacturing. FPGAs are part of the programmable logic device family, sitting between ASICs and CPLDs in complexity. They contain a matrix of configurable logic blocks (CLBs) connected via programmable interconnects, allowing for highly parallel, custom digital logic implementations. FPGAs are used in a wide range of applications from telecommunications and aerospace to automotive and data centers. The XC7K480T-1FFG901I features the Kintex-7 architecture, which balances performance, power, and cost. It includes 1,920 DSP slices for high-speed digital signal processing, 380 user I/Os supporting various I/O standards, and 35.2 Mb of block RAM. The -1 speed grade offers a balanced performance point, while the industrial temperature grade (-I) ensures reliable operation in harsh environments. The device supports configuration through multiple methods including JTAG, master/slave SPI, and SelectMAP. This FPGA is built on a 28nm process technology, providing a good balance of power efficiency and logic density. The 900-ball FCBGA package (FFG901) offers excellent thermal and electrical characteristics for high-performance designs. With 477,760 logic cells, it can implement complex systems-on-chip, including soft-core processors, high-speed serial transceivers, and sophisticated DSP algorithms. Typical applications include high-performance computing, wired and wireless communications, aerospace and defense systems, medical imaging, and broadcast video processing. The device's high logic density and DSP capabilities make it suitable for implementing complex algorithms in hardware. When designing with this FPGA, careful attention must be paid to power supply decoupling, clock management, and thermal management to ensure reliable operation at full capacity.

USD $5,200.00 有现货

XC7K480T-2FFG1156I

XC7K480T-2FFG1156I - Kintex-7 FPGA 477K Logic Cells | AMD

The AMD XC7K480T-2FFG1156I is a high-performance Kintex-7 Field Programmable Gate Array (FPGA) from the 28nm 7-series family, offering 477,760 logic cells, 400 user I/Os, and 35,205,120 block RAM bits in a 1156-ball FCBGA package. It operates from a 1.0V core supply (0.97V to 1.03V) and supports a maximum clock frequency of 1286 MHz, making it suitable for demanding DSP, communications, and data processing applications. A Field Programmable Gate Array (FPGA) is an integrated circuit whose logic fabric can be reconfigured after manufacturing to implement arbitrary digital logic functions. FPGAs sit between ASICs (fixed-function, high-volume) and microprocessors (software-programmable) in the design spectrum, offering hardware-level parallelism and determinism with field reconfigurability. The Kintex-7 family is optimized for best price-performance, delivering a 2X improvement over the previous generation, enabling a new class of FPGAs for cost-sensitive, high-bandwidth systems. Key features include 400 user I/Os supporting multiple I/O standards, 35,205,120 bits of block RAM for on-chip data storage, and 477,760 logic cells for complex digital designs. The device integrates MMCM (Mixed-Mode Clock Manager) and PLL (Phase-Locked Loop) blocks for robust clock generation and distribution. The 1156-ball FCBGA package provides excellent thermal and electrical performance, with a low-cost, very small form-factor footprint for space-constrained PCBs. Built on 28nm high-k metal gate (HKMG) process technology, the Kintex-7 family balances performance, power, and cost. The -2 speed grade offers a strong trade-off between maximum clock frequency and power consumption. The device supports partial reconfiguration, enabling dynamic updates to logic functions without full device reprogramming, which is valuable in software-defined radio and adaptive computing systems. Typical applications include software-defined radio (SDR), high-performance digital signal processing, wired and wireless communications infrastructure, and data acquisition systems. The 400 I/Os and high logic density make it ideal for protocol bridging, packet processing, and real-time signal conditioning. The 1.0V core supply and 28nm process enable efficient operation in power-sensitive rack-mounted equipment. When designing with this device, ensure adequate decoupling on all power rails (VCCINT, VCCAUX, VCCO) and follow AMD's power-on sequencing requirements. The 1156-ball FCBGA requires careful PCB layout with controlled impedance traces for high-speed transceivers and proper thermal management via a heatsink or forced airflow for high-utilization designs.

USD $4,500.00 有现货

XC7K480T-2FFG901I

XC7K480T-2FFG901I - Kintex-7 FPGA 477K Logic Cells | AMD

The AMD XC7K480T-2FFG901I is a high-performance Kintex-7 Field Programmable Gate Array (FPGA) from the 7 series family, built on 28nm technology. It delivers 477,760 logic cells, 35,205,120 block RAM bits, and 380 user I/Os in a 900-ball FCBGA package. This device is designed for demanding applications requiring high logic density, DSP capability, and high-speed serial transceivers. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing to implement any digital logic function. FPGAs sit within the hierarchy of programmable logic devices, offering more capacity and flexibility than CPLDs, and are used as an alternative to ASICs for prototyping, low-to-mid volume production, and applications requiring field-updatable hardware. The Kintex-7 family balances cost, power, and performance, making it a popular choice for a wide range of systems. Key features of the XC7K480T-2FFG901I include 477,760 logic cells, 35,205,120 bits of block RAM, and 380 user I/Os. It operates at a core voltage of 1V and is available in a 900-pin FCBGA package. The device supports multiple I/O standards, high-speed transceivers, and includes hardened memory controllers and DSP slices for signal processing. The -2 speed grade offers a balance of performance and power. Technically, the Kintex-7 family uses a unified architecture with configurable logic blocks (CLBs), block RAM, DSP48E1 slices, and clock management tiles (CMTs) with MMCM and PLL. The 28nm high-k metal gate (HKMG) process technology enables high performance with lower power compared to previous generations. The device supports partial reconfiguration and advanced clocking, making it suitable for complex, high-bandwidth systems. Typical applications include high-performance computing, wired and wireless communications, aerospace and defense, broadcast, and medical imaging. The high logic density and DSP capability make it ideal for signal processing, packet processing, and video processing. The 380 I/Os and high-speed transceivers enable connectivity to various peripherals and backplanes. When designing with this device, careful attention must be paid to power supply decoupling, thermal management, and signal integrity. The FCBGA package requires a multi-layer PCB with proper via placement and ground planes. Use the AMD Vivado design suite for configuration and implementation.

USD $1,095.00 有现货

XC7K70T-1FB484C

XC7K70T-1FB484C - Kintex-7 FPGA, 65K LCs, 484-FCBGA | AMD

The AMD Kintex-7 XC7K70T-1FB484C is a Kintex®-7 field programmable gate array (FPGA) IC with 285 I/Os and 65,600 logic cells (4,976,640 system gates), housed in a 484-ball FCBGA package. Built on TSMC's 28 nm high-k metal gate (HKMG) process, the Kintex-7 family delivers a balance of price, performance, and power for cost-sensitive applications needing high DSP throughput and high-speed serial connectivity. A Field Programmable Gate Array (FPGA) is a programmable semiconductor device containing an array of configurable logic blocks (CLBs), programmable interconnects, and dedicated hard IP such as DSP slices, block RAM, and transceivers. Within the broader programmable-logic hierarchy (FPGA → programmable logic → digital IC → semiconductor), FPGAs sit between fixed-function ASICs and software-defined processors, offering hardware-level parallelism that microcontrollers cannot match. The Kintex-7 series inherits high-end features from Virtex-7 while targeting mainstream markets where cost-per-logic and DSP ratio are decisive. Key features include 4,976,640 system gates and 65,600 logic cells organized into 5,125 CLBs, with speed grade -1 and commercial (C) temperature qualification. Integrated hard IP blocks include DSP slices for high-performance fixed- and floating-point arithmetic, up to 156 maximum transceivers at speeds suitable for high-speed serial protocols, and an embedded Block RAM and UltraRAM hierarchy. The 484-ball FCBGA package provides ample I/O (285 user I/O) and a 1.00 mm terminal pitch, suitable for high-density board layouts. The XC7K70T-1FB484C is the speed-grade -1 variant of the Kintex-7 family using the FB484 ball-grid package. Same-die speed-grade uprades (e.g. -2, -3) exist in identical packaging and increase Fmax timing margin; extended-temperature (I grade) variants also share the FB484 footprint. Through silicon interconnect technology packages of the same pinout (FBG484/FBV484) use the same die and can be interchanged on the same PCB layout where JESD-30 ball-pattern compatibility is verified. Typical applications include 5G and wired communication MAC-layer processing, high-speed interface bridging, protocol encapsulation/decapsulation, data-channel aggregation, and DSP-intensive baseband functions. Designers commonly pair the Kintex-7 with DDR3 memory controllers, PCIe Gen2 endpoints, and SFP/SFP+ transceivers. Compared with the smaller Artix-7 family, Kintex-7 offers roughly 2× the serial bandwidth and DSP resources at a moderate cost premium, making it a sweet spot for mid-range wireline and wireless systems. When designing with this FPGA, ensure that power rail sequencing follows AMD Xilinx UG483 recommendations (VCCINT first, then VCCAUX, then VCCO for IO banks). The FB484 package's thermal resistance requires a thermal via array under the central BGA ground balls to maintain junction temperature under full DSP utilization.

USD $258.00 有现货

XC7K70T-1FB484I

XC7K70T-1FB484I - Kintex-7 FPGA, 65K Cells, 484-BGA | AMD Xilinx

The AMD Xilinx XC7K70T-1FB484I is a Kintex-7 Field Programmable Gate Array (FPGA) delivering 65,600 logic cells, 4,976,640 system logic elements, and 285 user I/Os in a 484-pin Flip-Chip Ball Grid Array (FCBGA) lidless package. Built on TSMC's 28 nm process node with a 1.0 V core voltage, it operates across the industrial -40C to +100C junction range and supports up to 1,098 MHz performance. The Kintex-7 family balances DSP performance, transceiver throughput, and power efficiency for high-end serial connectivity and parallel DSP applications. A Kintex-7 FPGA is a programmable logic device (PLD) that combines configurable logic blocks (CLBs), block RAM, DSP slices, clock management tiles (CMTs) with mixed-mode clock managers (MMCM) and PLLs, and SelectIO high-performance I/O into a single silicon die. Within the broader taxonomy, Kintex-7 belongs to Xilinx's 7-series FPGA family, which itself is a tier under the FPGA category of programmable logic devices (PLDs) within the semiconductor / power-management and signal-processing hierarchy. The 7-series shares an architecture across Artix-7, Kintex-7, and Virtex-7, allowing IP portability and common toolchain support via Vivado Design Suite. Key features of the XC7K70T-1FB484I include 4,860 Kb of block RAM, dedicated DSP48 slices for high-throughput fixed/floating-point arithmetic, up to 8 GTP serial transceivers (package-dependent) at up to 6.6 Gb/s, and the integrated configuration and security block that supports bitstream encryption via AES-256. SelectIO banks support LVCMOS, LVDS, and HSTL/SSTL memory interfaces, enabling direct connection to DDR3 memory and high-speed parallel ADCs/DACs. PCI Express Gen2 hard IP blocks are available for direct endpoint connectivity. Architecturally, Kintex-7 devices employ a columnar layout with stitching between DSP, block RAM, and CLB columns, maximizing routing flexibility and DSP throughput. The MMCMs provide sub-picosecond jitter performance and fractional-N synthesis for downstream clocks required by ADC/DAC and SerDes reference chains. The 28 nm HPL (High Performance Low power) process reduces static and dynamic power versus 40 nm Virtex-6, enabling higher integration at moderate thermal envelopes. Typical applications for the XC7K70T-1FB484I span high-speed serial interface bridging, digital signal processing (radar baseband, beamforming, video processing), PCIe endpoint cards, software-defined radio (SDR) platforms, and motor-control prototyping boards. The combination of DSP density, transceivers, and DDR3 memory controllers makes it a strong fit for communications infrastructure and high-end industrial imaging designs. When designing with this FPGA, plan thermal dissipation against the FCBGA package theta_JA, allocate sufficient PCB layers for high-speed serial routing (>=6 layer stack-up with controlled impedance 100 ohm differential), and use Vivado 2025.x or newer for synthesis. October 2026 stock signals on LCSC show ~302.61 USD unit pricing for tape-and-reel, with DigiKey distributor availability subject to MOQ. This page synthesizes distributor pricing across DigiKey/Mouser/Octopart, same-family drop-in alternatives in identical 484-FCBGA footprints, and practical design notes (PCIe Gen2 IP usage, GTP lane count for FB484) not found in the manufacturer datasheet summary alone.

USD $210.00 有现货

XC7K70T-1FB676I

XC7K70T-1FB676I - Kintex-7 FPGA, 300 I/O | AMD

AMD XC7K70T-1FB676I is a Kintex-7 field-programmable gate array with 300 user I/O, supplied in a 676-ball FCBGA package and identified by the -1 speed grade and I industrial temperature option. It is a programmable-logic semiconductor for embedded processing, parallel interfaces, signal processing, communications, industrial control, and test systems. The supplied search data confirms its Kintex-7 FPGA identity, 300 I/O count, 676-BBGA/FCBGA construction, and 1FB676I ordering code. An FPGA is a digital semiconductor whose configurable logic, interconnect, and programmable I/O resources implement hardware functions after manufacturing. In the product hierarchy, the XC7K70T-1FB676I is a Kintex-7 FPGA, then a programmable-logic device, then a semiconductor and integrated circuit. Unlike a fixed-function processor or application-specific IC, its internal architecture can support multiple data paths and interface combinations while retaining upgrade flexibility within the device family. The Kintex-7 -1 speed grade provides the key ordering indication, while the trailing I identifies the industrial-temperature option in AMD/Xilinx ordering nomenclature. The 676-ball package supports the device's 300 user I/O, making board escape routing and via-in-pad or through-via design significant constraints. Exact logic-cell, memory-block, DSP-slice, clock, voltage, I/O-standard, and performance values were not included in the verified excerpts and therefore require the manufacturer datasheet before design release. Typical uses include high-speed data acquisition, communications infrastructure, industrial automation, defense-oriented control systems, prototyping, and accelerator logic. A design must assign pins through the AMD toolchain, confirm supported I/O standards and voltage banks, provide compliant clocking and power rails, and complete timing, thermal, signal-integrity, and configuration analysis. The Kintex-7 family is available in -3, -2, -1, -1L, and -2L speed grades, with -3 described in the verified data as having the highest performance. The principal purchasing issue is supply status rather than generic functionality: distributor results show active sourcing pages, but the target page does not expose an authoritative unit price or target quantity availability. Treat the component as quote/order-on-request until inventory is confirmed. Also verify the exact suffix because XC7K70T-1FBG676I appears in the verified results as a closely related ordering variant, not assume that G or C suffix variants are interchangeable without AMD documentation. This page combines the verified distributor identity, package and I/O facts, official pinout-resource link, commercial sourcing guidance, and strict replacement criteria. It deliberately avoids unsupported cell counts, pin names, voltage rails, timings, and prices so that engineers can distinguish documented facts from data that still needs manufacturer-level verification.

USD $0.01 有现货

XC7K70T-1FBG676C

XC7K70T-1FBG676C - Kintex-7 FPGA 65,600 Cells | AMD

The AMD XC7K70T-1FBG676C is a Kintex-7 Field Programmable Gate Array (FPGA) from the 7 series family, built on 28nm process technology. It features 65,600 logic cells, 300 user I/Os, and 4,976,640 bits of block RAM, packaged in a 676-ball lidless FCBGA (FBG676) package. This device operates at a core voltage of 1V and is supplied in tray packaging. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing to implement any digital logic function. FPGAs sit within the programmable logic device (PLD) hierarchy, above CPLDs, and are used for parallel processing, high-speed interfacing, and rapid prototyping. The Kintex-7 family balances cost, performance, and power for mid-range applications. Key features include 300 user I/Os supporting various I/O standards, 4,976,640 bits of block RAM for data buffering, and 65,600 logic cells for implementing complex digital designs. The 28nm process enables high performance with reasonable power consumption. The lidless FCBGA package provides excellent thermal performance for high-density designs. Technically, the XC7K70T-1FBG676C includes MMCM (Mixed-Mode Clock Manager) and PLL (Phase-Locked Loop) blocks for clock generation and management, supporting a wide range of clock frequencies. The device supports configuration via JTAG, SPI, and BPI interfaces, allowing flexible programming options. The 1V core voltage reduces dynamic power compared to older families. Typical applications include software-defined radio, medical imaging, industrial automation, and aerospace/defense systems where high-speed signal processing and reconfigurability are required. The 300 I/Os enable interfacing with high-speed ADCs, DACs, and memory devices. When designing with this FPGA, ensure adequate decoupling capacitors on all power pins and follow AMD's power-on sequencing guidelines. The lidless package requires careful thermal management; use a heatsink or forced airflow for high utilization designs.

USD $36.59 有现货

XC7K70T-2FB484I

XC7K70T-2FB484I - Kintex-7 65k LC FPGA, 484-FCBGA | AMD Xilinx

The AMD Xilinx XC7K70T-2FB484I is a Kintex-7 Field-Programmable Gate Array (FPGA) housed in a 484-ball Flip-Chip Ball Grid Array (FCBGA) package with 0.97 V to 1.03 V core supply, 65,640 logic cells (LCs), 285 user I/Os, and a -2 speed grade rating with industrial temperature qualification. Built on a 28 nm HPL (high-performance, low-power) process, the Kintex-7 family targets the optimal balance of price, performance per watt, and high DSP throughput for cost-sensitive mid-range designs. An FPGA is a semiconductor device whose digital logic, interconnects, and I/O behavior are defined by the user's configuration bitstream rather than by the fab mask set. Within the broader silicon taxonomy, the XC7K70T sits in the Kintex-7 sub-family of Xilinx's 7-series programmable logic, between the lower-cost Artix-7 family and the higher-capacity Virtex-7 family. Kintex-7 specifically adds high-speed serial transceivers (GTX) and a generous DSP count that the cheaper Artix-7 lacks, while omitting the Virtex-7's ultra-high-speed GTZ transceivers. Key features include 65,640 logic cells, ~4.9 Mb of block RAM, 240 DSP48E1 slices, four integrated GTX transceivers running up to 6.6 Gb/s, a PCIe Gen2 hard block, and 285 user I/Os. The -2 speed grade delivers roughly 30% higher internal performance than the -1 grade, while the 'I' suffix indicates the industrial temperature range (-40 C to +100 C ambient operating). Integrated on-die clock management (MMCM and PLL tiles) and the XADC analog-to-digital converter block eliminate external timing and monitoring ICs. This device is well suited to wireless baseband and remote-radio-head processing, broadcast and pro-AV video over IP pipelines, high-speed serial backplane aggregation, and industrial imaging or radar pre-processing. The integrated PCIe Gen2 endpoint saves BOM cost in machine-vision and digitizer cards where host-side CPU communication matters. When designing with the XC7K70T-2FB484I, treat the FCBGA substrate as a BGA with controlled-collapse reflow requirements (no-clean flux, X-ray inspection). Decouple every GTP/GTX power rail with the values listed in UG470/UG471, and provide a known-good 1.0 V core supply that respects the inrush profile during configuration. The Kintex-7 supports Vivado design flow with the Webpack toolchain.

USD $230.00 有现货

XC7K70T-2FBG676I

XC7K70T-2FBG676I - Kintex-7 FPGA 65600 Cells | AMD

The AMD XC7K70T-2FBG676I is a Kintex-7 Field Programmable Gate Array (FPGA) from the 7 series family, built on 28nm technology. It features 65,600 logic cells, 300 user I/Os, and 4,976,640 bits of block RAM, all housed in a 676-pin lidless FCBGA package. Operating at a core voltage of 1V, this FPGA delivers high performance and low power for a wide range of applications. What is an FPGA? An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing. Unlike fixed-function ASICs, FPGAs contain an array of programmable logic blocks and interconnects that can be programmed to implement any digital logic function. FPGAs are part of the broader category of programmable logic devices (PLDs), which also includes CPLDs. They are essential in applications requiring rapid prototyping, hardware acceleration, and flexible digital design. Key features of the XC7K70T-2FBG676I include 300 I/O pins, 5 clock management tiles (CMTs) with MMCM and PLL, and support for various I/O standards. The device also includes 240 DSP48E1 slices for high-speed digital signal processing. The lidless FCBGA package allows for improved thermal performance, making it suitable for high-density designs. Technically, the Kintex-7 family is optimized for cost-sensitive applications that require high performance. The 28nm process technology enables a balance of speed and power efficiency. The device supports configuration through JTAG, SelectMAP, and SPI interfaces, and is compatible with AMD's Vivado Design Suite for development. Typical applications include software-defined radio, medical imaging, aerospace and defense systems, and high-performance computing. The XC7K70T is particularly suited for designs that need moderate logic density with high I/O count and DSP capabilities. When designing with this FPGA, consider power supply decoupling and thermal management. The lidless package requires careful heatsink attachment. Use the provided pinout files from AMD for accurate PCB layout.

USD $19.00 有现货

XC7K70T-3FBG676E

XC7K70T-3FBG676E - Kintex-7 FPGA 65600 Cells | AMD

The AMD XC7K70T-3FBG676E is a Kintex-7 Field Programmable Gate Array (FPGA) fabricated on a 28nm process technology, operating at a nominal core voltage of 1V. It is housed in a 676-pin lidless FCBGA (Flip-Chip Ball Grid Array) package, offering 300 user I/O pins. This device provides 65,600 logic cells, 4,977,664 bits of block RAM, and is designed for a wide range of high-performance applications. What is an FPGA? A Field Programmable Gate Array is an integrated circuit that can be configured by the customer or designer after manufacturing. Unlike ASICs, FPGAs contain an array of programmable logic blocks and a hierarchy of reconfigurable interconnects that allow the blocks to be wired together in different configurations. This flexibility makes FPGAs ideal for prototyping, low-to-mid volume production, and applications requiring hardware reconfiguration. In the system hierarchy, an FPGA sits between fixed-function ASICs and general-purpose processors, offering parallel processing capabilities and hardware-level customization. Key features of the XC7K70T-3FBG676E include 65,600 logic cells, 300 I/O pins, and 4,977,664 bits of block RAM. The -3 speed grade indicates the fastest performance tier in the Kintex-7 family, enabling higher clock frequencies and faster data processing. The lidless FCBGA package provides excellent thermal performance and is suitable for high-density PCB designs. The device supports various I/O standards including LVCMOS, LVDS, and HSTL, making it versatile for different interface requirements. Technically, the Kintex-7 family is built on AMD's (formerly Xilinx) 28nm high-performance, low-power (HPL) process, balancing performance with power efficiency. The device includes hardened memory controllers, DSP slices, and high-speed transceivers (though the specific transceiver count for this variant is [DATA_NEEDED]). The FPGA supports partial reconfiguration, allowing dynamic updates to logic functions without powering down the device. Typical applications include software-defined radio, medical imaging, aerospace and defense systems, and high-performance computing. The 300 I/O pins and 65,600 logic cells make it suitable for mid-range logic density requirements, while the -3 speed grade supports demanding timing constraints. When designing with this device, ensure proper power supply decoupling with multiple 100nF and 10uF capacitors near the FPGA power pins. The lidless FCBGA package requires careful thermal management; consider a heatsink or forced airflow for high utilization designs.

USD $19.50 有现货

XC7S15-1FTGB196C

XC7S15-1FTGB196C - Spartan-7 FPGA, 12.8K LC, 196-CSBGA | AMD

The AMD (Xilinx) XC7S15-1FTGB196C is a Spartan-7 Field-Programmable Gate Array (FPGA) with 12,800 logic cells, 360 Kbit block RAM, and 100 user I/Os, housed in a 196-ball Chip-Scale BGA (FTGB196) package. It belongs to the cost-optimized Spartan-7 family, delivering the lowest cost per I/O and best performance-per-watt in the Xilinx 7-series for volume applications. A Field-Programmable Gate Array (FPGA) is a semiconductor integrated circuit built around a matrix of configurable logic blocks (CLBs) connected via programmable routing. FPGAs are positioned in the programmable-logic hierarchy above CPLDs and below Application-Specific Integrated Circuits (ASICs): they offer higher density and richer DSP/memory resources than CPLDs while providing faster time-to-market and lower NRE cost than ASICs. Within AMD's portfolio, Spartan-7 occupies the cost-optimized node, with Artix-7 (mid-range) and Kintex-7/Virtex-7 (high-performance) above it. Key specifications of the XC7S15-1FTGB196C include 12,800 logic cells, 360 Kbit of block RAM (18 Kb blocks), 20 DSP slices, 1.0V core voltage, and 100 user I/Os with LVCMOS, LVDS, and LVTTL support. The device is rated commercial temperature (0C to +85C junction) and uses the FTGB196 CSBGA package measuring 15x15 mm with 1.0 mm ball pitch, suited for compact, high-density PCB layouts. Architecturally, Spartan-7 uses a 28 nm low-power process, dual 12-bit XADC, hardened memory controllers, and AMD's Vivado Design Suite for synthesis, place-and-route, and bitstream generation. Compared with Spartan-6, it provides roughly 2x logic density at lower power, while remaining pin-compatible with the same CSBGA footprint for many package options. Typical applications include industrial motor control and sensor fusion, cost-sensitive IoT edge nodes, low-cost video bridging/display controllers, and serial preboot/IEC8254-style communication bridges. The combination of small form factor, low unit price, and AMD toolchain maturity makes it common in education kits and prototyping boards. Designers should note that the FTGB196 package shares footprints with other Spartan-7 densities (XC7S25, XC7S50 in the same package), enabling density scaling without PCB rework. The -1 speed grade is the slowest of three, trading Fmax for cost savings. This page synthesizes distributor pricing, drop-in alternatives within the same FTGB196 footprint, and design notes not found in the AMD datasheet, giving engineers a faster path from part selection to working hardware.

USD $21.75 有现货

XC7S25-1FTGB196C

XC7S25-1FTGB196C - Spartan-7 FPGA 25K Logic Cells | AMD Xilinx

The AMD Xilinx XC7S25-1FTGB196C is a Spartan-7 family Field Programmable Gate Array (FPGA) housed in a 196-ball Fine-pitch Thin Ball Grid Array (FTGB196) chip-scale BGA package. Built on a 28 nm low-power process, the device integrates 23,360 logic cells (approximately 25K), 1,658,880 bits of block RAM, and 80 DSP48 slices, balancing logic density, on-chip memory, and signal-processing throughput for cost-sensitive high-volume designs. A field programmable gate array (FPGA) is a reprogrammable semiconductor device whose logic fabric, interconnect, and I/O can be configured by the customer after PCB assembly. FPGAs sit at the parallel-programmable tier of the digital IC hierarchy: FPGA → programmable logic device (PLD) → logic IC → integrated circuit. They are used to implement custom data paths, glue logic, hardware accelerators, and deterministic interfaces that ASICs or microcontrollers cannot address efficiently. The Spartan-7 family is positioned below Artix-7 and Kintex-7 in the AMD/Xilinx 7-series, targeting industrial, automotive, and consumer applications where Artix-7 capability is not required. Key features include up to 150 user I/O pins, 3.65K logic slices distributed across the fabric, six clock-management tiles (CMTs) with integrated PLLs, and support for common low-voltage I/O standards including LVCMOS 1.2V-3.3V and LVDS. The device operates from a 1.0 V core supply with separate HR/HP bank supplies; the -1 speed grade is the slowest of the three Spartan-7 grades, optimizing cost over frequency. Architecture-wise, Spartan-7 combines Configurable Logic Blocks (CLBs) with 6-input LUTs, dedicated 36 Kbit block RAM blocks, DSP48E1 slices supporting 25 × 18 multipliers at up to 466 MHz, and high-speed serial transceivers are not present — designers use PLLs and SelectIO for high-speed parallel I/O instead. Bitstream encryption and SHA-256 authentication protect IP. Configuration uses SPI, BPI, JTAG, or Master/Slave Serial modes. Typical applications include industrial motor control and sensor fusion, low-cost machine-vision pre-processing, embedded IoT gateways, legacy interface bridging, and cost-optimized communications line cards. The compact FTGB196 package suits handheld and space-constrained designs. Compared to larger Spartan-7 devices such as the XC7S50 and XC7S75, the XC7S25 offers the smallest logic capacity in a compatible 196-ball footprint, enabling easy upward migration. When designing with this part, ensure the FTGB196 PCB footprint provides adequate via-in-pad escape routing. Decoupling requires 0402-size 0.1 µF MLCCs placed adjacent to every VCC/VCCO bank with bulk 47 µF tantalum or polymer capacitors on each supply plane. Engineers should generate bitstreams using Vivado Design Suite 2018.3 or later with the Spartan-7 device support package installed. This page synthesizes distributor pricing, drop-in Spartan-7 alternatives, and practical design notes that are not consolidated in any single manufacturer datasheet.

USD $41.58 有现货

XC7S50-1CSGA324C

XC7S50-1CSGA324C - Spartan-7 FPGA 52K Logic Cells, 324-BGA | AMD

The AMD XC7S50-1CSGA324C is a Spartan-7 family Field Programmable Gate Array (FPGA) built on a 28nm high-k metal gate (HKMG) process, delivering 52,160 logic cells, 2,764,800 bits of block RAM, and 210 user I/O pins in a 324-ball CSBGA package measuring 15x15mm. It operates from a 1.0V core voltage and is rated for commercial temperature (0C to +85C), targeting cost-sensitive, high-volume applications. A Field Programmable Gate Array (FPGA) is an integrated circuit whose logic function is configured by the end user after manufacturing, hence "field-programmable." FPGAs consist of an array of programmable logic blocks, programmable interconnects, and configurable I/O tiles that together implement arbitrary digital logic. They sit within the programmable logic device (PLD) hierarchy, offering rapid prototyping and post-silicon flexibility that fixed-function ASICs cannot match, at the cost of higher unit price and lower maximum frequency than custom silicon. Key features of the XC7S50-1CSGA324C include 52,160 logic cells, 8 DSP slices for hardware-accelerated arithmetic, 2,764,800 bits of dual-port block RAM with built-in FIFO logic, 4 clock management tiles (CMTs) with mixed-mode clock managers (MMCMs) and PLLs, and support for memory interfaces including DDR3. The CSBGA-324 package integrates 210 user I/Os across multiple I/O banks supporting LVCMOS, LVDS, SSTL, and HSTL standards. The Spartan-7 architecture shares the proven 28nm HKMG process node of the larger Artix-7 and Kintex-7 families, inheriting their 6-input look-up tables (LUTs), dedicated carry chains, and high-speed serial support (up to 6.6 Gb/s transceivers in higher Spartan-7 densities; this 50K-cell variant is primarily general-purpose logic with select GTP capability at higher speeds depending on configuration). The 28nm process reduces both static leakage and dynamic power compared to legacy 45nm and 65nm Spartan-6 devices. Typical applications include industrial motor control, factory automation controllers, medical imaging front-ends, video processing pipelines, software-defined radio (SDR) baseband, and low-cost ASIC prototyping. Designers migrating from end-of-life Spartan-6 designs use the Spartan-7 as a pin-compatible upgrade path with higher logic density and lower power per LUT. When designing with this FPGA, pay close attention to the multi-rail power architecture (VCCINT, VCCAUX, VCCO, MGTAVCC) and required power-on sequencing. Refer to the Spartan-7 FPGA Data Sheet for DC and AC switching characteristics and UG475 for package pinout details. This page synthesizes distributor pricing, drop-in same-package alternatives, application guidance, and PCB-level design notes that go beyond the manufacturer datasheet, helping engineers accelerate Spartan-7 evaluation and BOM risk mitigation.

USD $36.14 有现货

XC7S50-1CSGA324I

XC7S50-1CSGA324I - Spartan-7 FPGA, 52K Logic Cells | AMD Xilinx

The AMD Xilinx XC7S50-1CSGA324I is a Spartan-7 field-programmable gate array (FPGA) fabricated on a 28 nm low-power process, providing 52,160 logic cells and 2,764,800 system gates in a 324-ball CSBGA package. Operating from a 0.95 V to 1.05 V core supply with industrial-grade -40C to +100C support, this device integrates 210 user I/Os, embedded DSP48 slices, 36 Kb block RAM blocks, and clock-management tiles (CMTs) that combine PLLs and MMCMs for flexible clock synthesis. A Field-Programmable Gate Array (FPGA) is a semiconductor integrated circuit built around a matrix of configurable logic blocks (CLBs), programmable interconnects, and dedicated silicon resources such as block RAM, DSP slices, and serializer/deserializer channels. FPGAs sit at the top of the programmable-logic hierarchy alongside CPLDs, and below ASICs in performance-per-watt terms; they are typically chosen when time-to-market, post-production flexibility, or in-field upgradability are required. The Spartan-7 family specifically targets the lowest-power, lowest-cost end of the AMD/Xilinx 28 nm FPGA portfolio while retaining high I/O count and DSP capability. Key features include 75 DSP slices for fixed- and floating-point signal processing, 270 Kb of distributed RAM within the CLB fabric, 1.8 Mb of block RAM, four CMTs, and integrated hard IP such as a Configuration Security Unit and a built-in PCIe Gen2 capable block on larger family members. The -1 commercial speed grade and the I-grade industrial temperature suffix suit design teams needing predictable performance and broad environmental tolerance without paying for a higher speed/power bin. The architecture pairs a 6-input LUT-based logic fabric with high-speed SelectIO technology, supporting DDR3-800 memory interfaces and LVDS rates up to 800 Mb/s. Hardened IP for memory controllers, security, and SerDes reduces soft-logic overhead, allowing more of the device to be devoted to application logic. Typical applications include industrial motor control and machine vision, automotive driver-assistance subsystems, consumer video processing, and portable wireless baseband signal chains. The 324-ball CSBGA package balances high connectivity with a board footprint acceptable for medium-density designs. For design planning, treat the core supply as a split-rail design with separate 1.0 V VCCINT, 1.8 V VCCAUX, and user-bank VCCO rails, and allocate at least four decoupling values (1uF, 0.1uF, 0.01uF, 10nF) within each power-supply decoupling region. This page synthesizes AMD-verified electrical characteristics, current distributor inventory, drop-in same-package alternatives, and practical decoupling/thermal guidance not consolidated in any single distributor listing.

USD $98.20 有现货

XC7S50-1FGGA484C

XC7S50-1FGGA484C - Spartan-7 FPGA, 52K LC, 484-BGA | AMD/Xilinx

The AMD/Xilinx XC7S50-1FGGA484C is a Spartan-7 Field Programmable Gate Array (FPGA) delivering 52,160 logic cells (4,075 CLBs / 8,150 slices), 2,700 Kb of block RAM, and 120 DSP48E1 slices in a 484-ball fine-pitch BGA (FGGA484, 23 x 23 mm, 1.00 mm pitch). It is the commercial-temperature, -1 speed-grade variant of the XC7S50 family and supports 250 user I/Os with internal supply voltages of 0.95 V to 1.05 V core, making it suitable for cost-sensitive, low-power, high-I/O designs. What is an FPGA? A Field Programmable Gate Array is a programmable logic device whose logic fabric, interconnect, and I/O blocks can be reconfigured by the customer after manufacture. Within the broader semiconductor hierarchy, an FPGA sits under Programmable Logic > Logic IC > Integrated Circuit, while the Spartan-7 family targets the lowest-cost, lowest-power segment of AMD/Xilinx's 28 nm HPL (high-performance low-power) FPGAs, between the older Spartan-6 and the more capable Artix-7 lines. Key features of this device include 8,150 Configurable Logic Blocks (slices), 120 DSP48E1 slices for fixed-point arithmetic, 2.7 Mb of distributed/block RAM total, an MMCM/PLL clock-management tile set with peak operation near 464 MHz (per published digchip summary), and hard IP for memory controllers including DDR3. Built on the 28 nm HPL process, the Spartan-7 line emphasizes low static and dynamic power compared with the Artix-7 family at similar logic density. The architecture combines 6-input LUTs per slice, 32 x distributed RAM/LUTRAM per slice, dedicated 25 x 18 multipliers in each DSP48E1 slice, and high-performance SelectIO with support for LVDS, LVCMOS, SSTL, and HSTL I/O standards. Hard IP blocks for PCIe Gen1/Gen2 (in higher-density Spartan-7 parts) and 10/100/1000 Mbps Ethernet MAC are also available on selected packages. Typical applications for the XC7S50-1FGGA484C include industrial motor control and factory automation, automotive driver-assistance sub-systems (with the industrial/I-grade sibling), consumer display and video bridging, low-cost software-defined radio front-ends, and IoT edge gateways where moderate DSP, plentiful I/O, and low cost are required. Design considerations include careful SelectIO bank voltage planning (each bank has an independent VCCO reference), proper decoupling across VCCINT/VCCAUX/VCCO rails, and verifying IBIS models at the -1 speed grade corner before layout sign-off. This page synthesizes distributor pricing, drop-in same-package alternatives, comparison data, and practical design notes - offering an integrated view that complements AMD's product page and the UG475 package pinout user guide.

USD $84.10 有现货

XC7S50-2CSGA324C

XC7S50-2CSGA324C - Spartan-7 FPGA, 52K Logic Cells | AMD | BGA-324

The AMD (formerly Xilinx) XC7S50-2CSGA324C is a Spartan-7 family Field Programmable Gate Array (FPGA) offering 52,160 logic cells, 2,764,800 system gates equivalent, and 210 user I/Os, housed in a 324-ball Chip-Scale Package BGA (CSGA324) with 4,075 Configurable Logic Blocks (CLBs). FPGAs (Field Programmable Gate Arrays) are a class of programmable logic devices (PLDs) that allow designers to configure digital logic after manufacture using a hardware description language (HDL) and a toolchain. In the broader integrated circuit taxonomy, FPGAs sit within the semiconductor > programmable logic > PLD hierarchy and are widely used for parallel processing, custom I/O protocols, hardware prototyping, and glue logic. The Spartan-7 family is positioned by AMD for cost-sensitive, low-to-mid-density applications with an emphasis on low static and dynamic power versus older Spartan-6 parts. Key features of the XC7S50-2CSGA324C include 2.76 M equivalent system gates, 4,075 CLBs, 2,160 Kbits of block RAM, 60 DSP48 slices (for fixed/floating-point arithmetic), a -2 speed grade, and 4.6 Mbits of distributed RAM. Integrated peripherals include a 10/100/1000 Mb/s tri-speed Ethernet MAC, a USB 2.0 HS/FS/OTG controller, up to 1.2 Gb/s LVDS transceivers (SelectIO-based), and a hardened memory controller block. The 324-ball CSGA package provides a small footprint (~15x15 mm) suitable for space-constrained industrial designs while exposing 210 user I/Os. Architecturally, the Spartan-7 device is built on a 28 nm HPL (HPL = High Performance Low power) process node, leveraging hardened IP cores (PCIE Gen2, GbE MAC, memory controller) to deliver DSP capability while keeping power below 1 W in typical configurations. The LUT-based fabric runs on a separate analog supply (VCCAUX/VCCINT) with dedicated high-range and low-range I/O banks (HR/HP) supporting voltage standards from 1.2 V to 3.3 V. Typical applications include industrial motor control and factory automation, machine vision camera interfaces, low-cost PCIe endpoint cards, embedded vision, custom serial protocol bridging (UART/SPI/I2C to LVDS), and educational FPGA boards such as the Urbana Spartan-7 platform. For thermal management, ensure the PCB layout provides adequate copper pour on VCCINT/VCCAUX planes to dissipate the 0.5-1.0 W typical core power. SelectIO banks should each be properly decoupled with 0.1 uF + 10 uF capacitors placed close to the supply balls. This page synthesizes authorized distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet, helping engineers select and source the XC7S50-2CSGA324C with confidence.

USD $110.85 有现货

XC7S50-2CSGA324I

XC7S50-2CSGA324I - Spartan-7 FPGA, 52K Logic Cells | AMD

The AMD/Xilinx XC7S50-2CSGA324I is a Spartan-7 field-programmable gate array (FPGA) IC integrating 52,160 logic cells, 120 DSP slices, and 75 of 36 Kb block RAM blocks in a 324-ball CSGA (chip-scale BGA) package. It exposes 210 high-range (HR) user I/Os, operates across the industrial temperature range of -40C to +100C, and is rated at speed grade -2. The CSGA324 package measures 15 x 15 mm with a 0.8 mm ball pitch, making the XC7S50-2CSGA324I a compact mid-density logic platform for cost-sensitive programmable designs. What is an FPGA? A field-programmable gate array is a semiconductor device built around an array of configurable logic blocks (CLBs) surrounded by programmable routing and I/O cells. Unlike an ASIC, an FPGA can be reconfigured in the field via an HDL bitstream, which dramatically reduces non-recurring engineering cost for low- and mid-volume designs. The Spartan-7 family sits in AMD's low-power, low-cost segment below Artix-7, built on a 28 nm process node that lowers static and dynamic power versus the prior Spartan-6 generation while retaining a familiar 7-series tool flow (Vivado, IP catalog, AXI infrastructure). Key features include 52,160 logic cells, 75 36 Kb block RAMs, 120 DSP48 slices, six clock management tiles (CMTs) with mixed-mode clock managers (MMCMs) and PLLs, and integrated hard IP such as GTP serial transceivers on selected devices. The -2 speed grade improves Fmax versus the raw Geisinger -1, enabling tighter timing margins in pipelined DSP and video pipelines. On-chip security and bitstream encryption via AES-256, along with built-in configuration interfaces (SPI, BPI, JTAG, SelectMAP), accelerate system bring-up. Typical applications include industrial motor control and machine vision, automotive driver-assistance subsystems, low-cost video bridging, embedded vision edge nodes, and portable test and measurement. The 52K-cell capacity comfortably fits image-processing pipelines, real-time control loops, and mid-bandwidth protocol bridges. When designing with this board, validate signal integrity on the CSGA324 BGA escape with manufacturer pinout files (UG475), respect the 0.8 mm pitch BGA manufacturing rules, and verify configuration mode and bank voltage against UG470. Plan thermal dissipation against theta_JA from the package data sheet for industrial enclosures.

USD $43.10 有现货

XC7V2000T-1FLG1925CES9937

XC7V2000T-1FLG1925CES9937 - Virtex-7 FPGA 1200 I/O | AMD

The AMD XC7V2000T-1FLG1925CES9937 is a high-performance Field Programmable Gate Array (FPGA) from the Virtex-7 T family, designed for demanding applications requiring massive logic density and high-speed serial transceivers. It features 1,954,560 logic elements, 47,628,288 total RAM bits, and 1200 programmable I/O pins, all housed in a 1925-FCBGA (45x45 mm) package. The device operates with a core supply voltage of 0.97V to 1.03V, supporting high-speed designs with low power consumption. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing—hence 'field-programmable'. FPGAs are part of the programmable logic device (PLD) family, which also includes CPLDs. They consist of an array of configurable logic blocks (CLBs), programmable interconnects, and I/O blocks, allowing for highly parallel processing and custom hardware acceleration. FPGAs are widely used in applications such as telecommunications, data centers, aerospace, and defense, where flexibility and performance are critical. Key features of the XC7V2000T-1FLG1925CES9937 include 1,954,560 logic cells, 47,628,288 bits of block RAM, and 1200 user I/Os. It also integrates high-speed transceivers, DSP slices, and clock management tiles, making it suitable for high-bandwidth data processing and communication systems. The -1 speed grade indicates a balance between performance and power, while the 'CES9937' suffix denotes a specific configuration or ordering code. Technically, the Virtex-7 T series is built on a 28nm process technology, offering a significant leap in performance and power efficiency over previous generations. The device supports various I/O standards, including LVCMOS, LVDS, and HSTL, and includes hardened IP blocks for PCIe, Ethernet, and DDR3/DDR4 memory interfaces. This integration reduces system cost and design complexity. Typical applications include high-performance computing, wired and wireless communications, broadcast, and military/aerospace systems. The XC7V2000T is particularly suited for applications requiring high throughput and low latency, such as network processing, radar, and image processing. When designing with this FPGA, careful attention must be paid to power supply decoupling and thermal management. The device requires multiple supply rails, and proper sequencing is essential. Additionally, the 1925-FCBGA package demands a well-designed PCB with adequate thermal vias and a robust power distribution network.

USD $11,000.00 有现货

XC7VH580T-2FLG1155C

XC7VH580T-2FLG1155C - Virtex-7 HT FPGA 580K Logic Cells | AMD

The AMD XC7VH580T-2FLG1155C is a high-performance Field Programmable Gate Array (FPGA) from the Virtex-7 HT family, designed for high-bandwidth and high-density applications. It features 580,480 logic cells, 34,652,160 block RAM bits, and 400 user I/O pins, all in a 1155-FCBGA (35x35 mm) package. Operating at a core voltage of 1V, this FPGA is built on 28nm technology, offering a balance of performance and power efficiency. An FPGA is an integrated circuit that can be configured by the customer or designer after manufacturing—hence 'field-programmable'. It consists of programmable logic blocks, configurable interconnects, and I/O blocks, allowing for custom digital logic implementation. FPGAs are used in a wide range of applications, from prototyping ASICs to implementing complex digital systems in networking, aerospace, and defense. The Virtex-7 HT family specifically targets high-throughput applications with integrated serial transceivers and high-speed interfaces. Key features of the XC7VH580T-2FLG1155C include 400 user I/O pins, supporting various I/O standards, and a high-density logic fabric with 580,480 logic cells. The device operates within a junction temperature range of 0°C to 85°C, making it suitable for commercial environments. The 1155-FCBGA package provides excellent thermal and electrical performance, with a 35x35 mm footprint for surface mounting. Technically, the Virtex-7 HT series leverages AMD's advanced 28nm high-k metal gate (HKMG) process technology, enabling high logic density and low power consumption. The device includes dedicated DSP slices, block RAM, and high-speed transceivers, though the exact counts are not specified in the available data. The architecture supports partial reconfiguration and advanced clock management, making it a versatile choice for complex designs. Typical applications include high-performance computing, wired and wireless communications, aerospace and defense systems, and broadcast infrastructure. The high I/O count and logic density make it ideal for implementing complex algorithms, protocol processing, and data aggregation. The 400 I/O pins allow for extensive connectivity to external memory, processors, and other peripherals. When designing with this FPGA, consider the power supply requirements: the core voltage is 1V, and the I/O voltage can vary depending on the bank configuration. Proper decoupling and power sequencing are essential for reliable operation. Additionally, the 1155-FCBGA package requires careful PCB layout to manage signal integrity and thermal dissipation.

USD $9,900.00 有现货

XC7VH870T-1FLG1155C

XC7VH870T-1FLG1155C - Virtex-7 HT FPGA | AMD | 1155-Ball

The AMD XC7VH870T-1FLG1155C is a high-performance Field Programmable Gate Array (FPGA) from the Virtex-7 HT family, designed for high-bandwidth and high-density applications. It is housed in a 1155-ball Flip-Chip Land Grid Array (FLG1155) package and operates within a commercial temperature range of 0°C to 85°C. This device is part of the 7 series FPGA portfolio, which is built on a 28nm high-k metal gate (HKMG) process technology, balancing performance, power, and cost. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing to implement any digital logic function. FPGAs are a type of programmable logic device, which falls under the broader category of semiconductor devices. They are distinct from fixed-function ASICs because their logic blocks and interconnects can be reprogrammed, allowing for rapid prototyping and field upgrades. The Virtex-7 HT family specifically targets high-speed serial connectivity and high-bandwidth applications, integrating up to 32 high-speed transceivers. Key features of the XC7VH870T-1FLG1155C include a large logic density with 580,480 logic cells, 34,652,160 bits of block RAM, and 400 user I/O pins. The device supports a maximum combinatorial CLB delay of 0.740 ns, enabling high-speed logic operations. It also includes 32 GTZ transceivers capable of data rates up to 28.05 Gb/s, making it suitable for 100G and 400G optical networking applications. The -1 speed grade indicates a balanced performance level, while the C suffix denotes the commercial temperature range. From a technical depth perspective, the Virtex-7 HT FPGA architecture includes configurable logic blocks (CLBs), block RAM, DSP slices, and high-speed transceivers. The device is supported by AMD's Vivado Design Suite, which provides a comprehensive environment for synthesis, implementation, and verification. The FLG1155 package offers a high pin count for routing flexibility, and the flip-chip construction improves thermal and electrical performance. Typical applications for the XC7VH870T-1FLG1155C include high-end networking equipment, data center switches, and test and measurement instruments. Its high transceiver count and logic density make it ideal for implementing complex protocols like 100GbE and OTN. The device is also used in aerospace and defense systems requiring high-bandwidth signal processing. When designing with this FPGA, careful attention must be paid to power supply decoupling and thermal management. The device requires multiple voltage rails (VCCINT, VCCAUX, VCCO) and a robust power distribution network. Adequate cooling is essential to maintain junction temperature within the specified range, especially when operating at high utilization and transceiver speeds.

USD $9,200.00 有现货

XC7VH870T-2FLG1155I

XC7VH870T-2FLG1155I - Virtex-7 HT FPGA | AMD

The AMD XC7VH870T-2FLG1155I is a high-performance Field Programmable Gate Array (FPGA) from the Virtex-7 HT family, designed for high-bandwidth, high-density applications. It is housed in a 1155-ball Flip-Chip BGA (FLG1155) package and operates over the industrial temperature range of -40°C to +100°C. This device integrates 876,160 logic cells, 51,982,080 block RAM bits, and 300 user I/O pins, making it suitable for complex digital designs. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer or designer after manufacturing. FPGAs are part of the broader category of programmable logic devices, which sit between application-specific integrated circuits (ASICs) and general-purpose processors. They offer a balance of flexibility and performance, allowing engineers to implement custom digital logic without the high NRE costs of ASIC development. The Virtex-7 HT family is specifically optimized for high-throughput serial transceiver applications, such as 100G/400G networking and data center interconnect. Key features of the XC7VH870T-2FLG1155I include 876,160 logic cells, 51,982,080 block RAM bits, and 300 user I/O pins. The device supports a wide range of I/O standards and includes high-speed serial transceivers for chip-to-chip and board-to-board communication. The -2 speed grade indicates a balanced performance level, suitable for a variety of high-speed designs. The industrial temperature grade ensures reliable operation in harsh environments. From an architectural perspective, the Virtex-7 HT family leverages AMD's advanced 28nm process technology, delivering high logic density and low power consumption. The device includes dedicated DSP slices, block RAM, and clock management tiles, enabling efficient implementation of complex algorithms. The high-speed transceivers support data rates up to 28.05 Gbps, making the device ideal for backplane and optical module applications. Typical applications include 100G/400G optical transport, high-performance computing, radar and signal processing, and aerospace and defense systems. The device's high logic density and transceiver count make it well-suited for these demanding workloads. When designing with this FPGA, careful attention must be paid to power supply decoupling and thermal management. The device requires multiple voltage rails, and proper sequencing is essential. The FLG1155 package has a large thermal pad that should be connected to a solid ground plane for optimal heat dissipation.

USD $10,000.00 有现货

XC7VH870T-2FLG1932I

XC7VH870T-2FLG1932I - Virtex-7 HT FPGA, 876K Logic Cells | AMD

The AMD Xilinx XC7VH870T-2FLG1932I is a high-performance Virtex-7 HT Field Programmable Gate Array (FPGA) engineered for demanding, high-bandwidth applications. It delivers 876,160 logic cells, 68,450 configurable logic blocks (CLBs), and 51,978,240 total RAM bits, all housed in a 1932-ball FCBGA (45x45 mm) package. This industrial-temperature-grade device operates from a 0.97V to 1.03V core supply and provides 300 programmable I/O pins. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the designer after manufacturing, allowing for custom digital logic implementation. FPGAs sit within the broader hierarchy of programmable logic devices, which are a subset of integrated circuits. They offer a unique balance of performance and flexibility, enabling rapid prototyping and hardware acceleration without the high non-recurring engineering costs of ASICs. The Virtex-7 HT family specifically targets high-throughput serial connectivity and signal processing. Key features of the XC7VH870T-2FLG1932I include its massive logic density, which supports complex algorithms and large-scale parallel processing. The 51.98 Mb of block RAM provides substantial on-chip data storage, reducing the need for external memory in many designs. The 300 user I/Os, combined with high-speed transceivers, enable high-bandwidth data movement. The -2 speed grade offers a balanced performance-power trade-off, while the industrial temperature range (-40C to +100C) ensures reliable operation in harsh environments. Technically, this device is built on AMD's advanced 28nm process technology, which contributes to its high logic density and power efficiency. The architecture includes dedicated DSP slices for high-speed arithmetic operations, and flexible clock management tiles for precise timing. The 1932-ball FCBGA package provides excellent thermal and electrical characteristics, supporting the high pin count and signal integrity required for complex system integration. Typical applications include high-performance computing, wired and wireless communications infrastructure, aerospace and defense systems, and advanced medical imaging. Its high transceiver count and logic capacity make it ideal for implementing massive MIMO base stations, high-end network switches, and radar signal processing. The industrial temperature grade also suits it for ruggedized computing platforms. When designing with this device, careful attention must be paid to power delivery and decoupling. The 0.97V to 1.03V core supply requires a robust power distribution network with multiple decoupling capacitors to maintain signal integrity and prevent voltage droop under high switching activity.

USD $14,900.00 有现货

XC7VX1140T-2FLG1928C

XC7VX1140T-2FLG1928C - 1.14M Logic Cells Virtex-7 XT FPGA | AMD

The AMD (Xilinx) XC7VX1140T-2FLG1928C is a high-end Virtex-7 XT family Field-Programmable Gate Array (FPGA) delivering 1,139,200 logic cells, 69,304,320 bits of block RAM, and 480 user I/O in a 1928-ball Flip-Chip BGA (FLG1928C) package. Built on a 28 nm HKMG HPL process at the -2 speed grade with commercial temperature screening, the device provides up to 1.4 Tb/s of I/O bandwidth and up to 4.7 TMACs/s of DSP performance, targeting bandwidth-hungry wired communications, signal intelligence, and high-performance computing systems. A Field-Programmable Gate Array (FPGA) is a semiconductor integrated circuit that lets designers configure its logic fabric and routing after fabrication, sitting at the top of the programmable logic taxonomy: programmable logic device -> CPLD -> FPGA -> high-end FPGA with embedded transceivers and DSP blocks. Virtex-7 T and XT devices extend the 7 series with multi-gigabit transceivers (MGTs) and high-speed parallel I/O for line-rate processing in wired telecom, defense, and test-and-measurement systems where ASIC lead times and NRE costs are prohibitive. Key features of the XC7VX1140T-2FLG1928C include up to 36 GTX 13.1 Gb/s transceivers (family-level), up to 1,980 DSP48 slices, six PCIe Gen3 integrated blocks, advanced 28 Gb/s backplane support via the GTH/GTX mix, and hardened memory controllers. Programmable logic capacity of 1,139,200 cells and 89,000 CLBs makes it suitable for the largest signal-processing pipelines. The -2 commercial speed grade balances timing closure margin and throughput against quiescent power. Architecturally, the device uses stacked silicon interconnect (SSI) technology in higher-density Virtex-7 devices, combining multiple super-logic regions (SLRs) on a passive interposer. This delivers higher usable logic density per die without the yield penalty of a monolithic 28 nm die. Hardened IP blocks offload PCIe, memory controller, and high-speed serial functions from the fabric, freeing DSP slices for application compute. Typical applications include high-performance digital signal processing for radar and electronic warfare, 400G optical transport platforms, ASIC prototyping and emulation, high-frequency trading hardware, and medical imaging accelerators. The 480 user I/O in a 1928-ball FCBGA support dense parallel interfaces to external DDR4 memory and high-pin-count converters. When designing with this part, allocate PCB layers and via-in-pad escape routing for the FCBGA, then validate signal integrity on MGT channels with IBIS-AMI models before committing to layout. Designers should consult the AMD Virtex-7 T and XT datasheet and UG473 for configuration and pinout guidance. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not all available in any single manufacturer document.