集成电路

子分类

📁 ADC/DAC 3,100+ 产品 📁 放大器IC 1,900+ 产品 📁 音频编解码器 18 产品 📁 音频IC 2 产品 📁 时钟与计时 660+ 产品 📁 Comparator ICs 1 产品 📁 DSP 1,100+ 产品 📁 数据采集IC 2 产品 📁 数字电位器 4 产品 📁 显示驱动与控制器 1 产品 📁 FPGA与CPLD 7,300+ 产品 📁 接口IC 3,300+ 产品 📁 LED驱动器 1 产品 📁 逻辑IC 460+ 产品 📁 存储IC 870+ 产品 📁 微控制器 20,000+ 产品 📁 微处理器 4 产品 📁 电机驱动器 1 产品 📁 其他 1 产品 📁 Sensor and Detector Interfaces 1 产品 📁 专用IC 15 产品 📁 视频IC 14 产品

产品（39,000+)

EP20K1000CF672C8ES - 1M-gate APEX20KE FPGA, 672-BGA | Intel
EP20K1000CF672C8ES

EP20K1000CF672C8ES - 1M-gate APEX20KE FPGA, 672-BGA | Intel

The Intel (Altera) EP20K1000CF672C8ES is a 1,000,000-gate APEX20KE family Field-Programmable Gate Array (FPGA) housed in a 672-ball FineLine BGA package. Built on a 0.18 µm CMOS process with embedded SRAM blocks (ESBs), the device integrates 38,400 logic elements / 25,920 typical gates and provides 508 user I/O pins with MultiVolt I/O supporting 1.8 V, 2.5 V, and 3.3 V interfacing. An APEX20KE device is a SRAM-based, in-system reprogrammable FPGA from Intel's (formerly Altera's) APEX 20K family that combines look-up table (LUT)-based logic, embedded system blocks for on-chip dual-port RAM, CAM, and FIFO, and a high-bandwidth True-LVDS / PLLs / ClockLock network. Within the broader taxonomy, an APEX20KE sits under: FPGA -> Programmable Logic Device (PLD) -> Logic IC -> Integrated Circuit -> Semiconductor. The 'KE' suffix denotes the enhanced variant with 2.5 V VCCINT for lower dynamic power consumption. Key features include 25,920 typical gates / 38,400 LEs, 216 Kbits of embedded system block RAM, up to 508 user I/O pins, four Phase-Locked Loops (PLLs) with ClockLock and ClockBoost circuitry, support for LVDS / LVPECL / LVTTL / PCI / GTL / SSTL-2/3 I/O standards, and in-system programmability via the IEEE 1532 / 1149.1 JTAG interface. The device is designed for high-performance, high-density digital designs including communications infrastructure, video processing, and DSP coprocessor functions. Typical applications for the EP20K1000CF672C8ES include telecommunications line cards, custom DSP datapaths, high-speed bus interfaces, video/graphics pre/post-processing, and prototyping ASICs. The C8 speed grade and 672-BGA FineLine BGA package make this specific device a high-I/O, commercial-temperature variant for use in cost-sensitive, high-volume designs where the larger 672-ball footprint is acceptable. For thermal and PCB planning: ensure the BGA thermal pad is soldered to a sufficiently large ground pour for heat dissipation. Refer to the Altera APEX 20K Programmable Logic Device Family datasheet for full AC/DC specifications, BSDL files, and Quartus II / MAX+PLUS II programming toolchain support.

询价 联系我们
EP20K1000CF672C8N - 1M Gate APEX 20KC FPGA, 672-BGA | Intel
EP20K1000CF672C8N

EP20K1000CF672C8N - 1M Gate APEX 20KC FPGA, 672-BGA | Intel

The Intel EP20K1000CF672C8N is a 1,000,000-gate APEX 20KC Field Programmable Gate Array (FPGA) from the MultiCore architecture family, packaged in a 672-ball Fine-pitch Chip-Scale Ball Grid Array with 1.27 mm pitch and 45 x 45 mm body. According to the manufacturer datasheet, it integrates 38,400 logic cells, 327,680 bits of embedded SRAM, and 508 user I/O pins, fabricated on a 0.15 µm all-layer copper process that delivers 25-35% higher performance than the original APEX 20K family. An FPGA (Field Programmable Gate Array) is a programmable logic device that uses a matrix of configurable logic blocks (CLBs), embedded memory, and programmable interconnects. The APEX 20KC series is part of the broader PLD (Programmable Logic Device) hierarchy: FPGA -> PLD -> programmable logic -> digital IC -> semiconductor. It evolved from simple SPLDs/CPLDs into high-density MultiCore devices combining look-up-table (LUT) logic with embedded memory blocks for high-performance system-on-chip prototyping and high-bandwidth datapath designs. Key features of the EP20K1000CF672C8N include up to 301 MHz internal operation, 1.6 ns propagation delay across LUT logic paths, dedicated high-speed embedded memory (EAB/MegaLAB), MultiCore architecture merging LUT and product-term logic, low-power copper interconnect, and pin-compatibility with APEX 20KE devices in the same 672-ball BGA package. The 0.15 µm copper process reduces dynamic power while maintaining high toggle rates, making the device suitable for both high-speed DSP pipelines and parallel I/O expansion designs. Architecturally, the device is organized around MegaLAB structures, each combining 16 Logic Elements (LEs), an Embedded System Block (ESB) implementing memory or product terms, and an associated local interconnect. The 508 user I/Os support multiple I/O standards including LVTTL, LVCMOS, PCI, and LVDS, enabling flexible interface bridging. The 327,680-bit embedded memory can be configured as RAM, ROM, dual-port RAM, or content-addressable memory without consuming logic resources, which is a distinguishing feature versus pure-logic FPGAs. Typical applications of the EP20K1000CF672C8N include high-speed telecommunications backplanes, parallel DSP coprocessor engines, network interface cards, broadcast video processing, and PCI/CompactPCI bus bridging. The combination of high gate density, embedded memory, and 508 user I/Os makes it a strong fit for designs that previously required gate-array ASICs, while still retaining in-system reprogrammability for prototype and low-volume production runs. When designing with this device, ensure your tool flow targets the APEX 20KC family specifically (Quartus II 5.0+ or the legacy MAX+PLUS II baseline). Verify BGA layout escape routing for the 1.27 mm ball pitch; the package is pin-compatible with APEX 20KE devices so existing PCBs in that family can accept the EP20K1000CF672C8N with updated firmware. Plan power decoupling across each VCC rail and consider thermal copper-pour reinforcement to dissipate the moderate power of a 1M-gate fabric at 301 MHz. This page synthesizes distributor pricing, lifecycle status, drop-in alternatives (including APEX 20KE cross-family variants on the Site MPN list), and practical design notes not found in the manufacturer datasheet alone - giving an engineer a single source for sourcing, replacement, and integration guidance.

询价 联系我们
EP20K1000CF672C9ES - 1M Gate APEX 20KC FPGA 508 I/O | Intel
EP20K1000CF672C9ES

EP20K1000CF672C9ES - 1M Gate APEX 20KC FPGA 508 I/O | Intel

The Intel EP20K1000CF672C9ES is a high-density APEX 20KC series FPGA delivering 1,000,000 system gates and 38,400 logic elements/cells, housed in a 672-ball Fine-Pitch BGA (FBGA) package measuring 27 x 27 mm. It exposes 508 user I/O pins and operates from a 1.71 V to 1.89 V core supply, manufactured on a 0.15 µm process technology with a 250 MHz internal performance rating. An FPGA (Field-Programmable Gate Array) is a reconfigurable integrated circuit that lets designers implement arbitrary digital logic through programmable logic blocks, interconnect, and I/O. Within the broader semiconductor taxonomy, FPGAs sit alongside ASICs in the programmable logic family, distinguished from CPLDs by higher logic density and embedded memory. The APEX 20KC family specifically targets high-performance, I/O-rich designs such as data-path bridging, telecom backplanes, and DSP front-ends. Key features include 3,840 LABs/CLBs (Logic Array Blocks), 327,680 total RAM bits for on-chip buffering, and a 27 x 27 mm FC-FBGA footprint that supports high-density board integration. The device is specified for 0 °C to 85 °C junction temperature operation, making it suitable for commercial and industrial environments but not extended-temperature automotive. Surface-mount assembly follows JEDEC moisture-sensitivity handling for large BGAs. Architecturally, the APEX 20KC combines look-up-table based logic elements with embedded memory and a high-speed MultiCore interconnect. The 1.8 V core supply and 0.15 µm geometry deliver a 250 MHz performance grade, while 508 user I/Os support wide parallel buses, LVDS pairs, and standard CMOS interfaces. This positions the part between mid-range Cyclone devices and high-end Stratix families of its generation. Typical applications include telecom line-card processing, high-speed serial protocol bridging, industrial machine vision pipelines, and test-and-measurement instrumentation. Designers also deploy the EP20K1000CF672C9ES in legacy FPGA upgrades where pin-compatible replacements must preserve existing PCB footprints. The device is currently marked Obsolete, so design teams should plan for last-time-buy windows and verify long-term supply. Quartus II design software (legacy releases) supports this part. Always validate signal integrity on dense BGA fanouts and use JEDEC-compliant reflow profiles to avoid package warpage. This page synthesizes distributor stock, drop-in same-package alternatives from the APEX 20KC family, and practical design notes not aggregated on any single manufacturer or distributor page.

询价 联系我们
EP20K1000CF672C9N - APEX 20KC 1M Gates FPGA | Intel / Altera
EP20K1000CF672C9N

EP20K1000CF672C9N - APEX 20KC 1M Gates FPGA | Intel / Altera

The Intel (formerly Altera) EP20K1000CF672C9N is a high-density APEX 20KC family field-programmable gate array (FPGA) with 1,000,000 system gates, 38,400 logic elements, and 327,680 bits of embedded memory, housed in a 672-ball flip-chip fine-pitch ball grid array (FC-FBGA) package measuring 27 x 27 mm with 1.0 mm pitch. It operates at 250 MHz core performance and is fabricated on a 0.15 micron all-layer copper-metal CMOS process running from a 1.8 V core supply. An FPGA (Field-Programmable Gate Array) is a semiconductor device built from a matrix of configurable logic blocks (CLBs), embedded memory, I/O cells, and programmable interconnect that an engineer can re-program at the board level to implement arbitrary digital logic. FPGAs sit in the programmable logic hierarchy between simple SPLD/CPLD devices and fixed-function ASICs, and they are widely used for glue logic, prototyping, DSP pipelines, custom bus interfaces, and pre-ASIC design verification where high gate counts and embedded memory are required. Key features of the EP20K1000CF672C9N include the MultiCore architecture combining look-up table (LUT) logic with embedded system blocks (ESBs) that can each be configured as RAM, ROM, dual-port RAM, or CAM, four phase-locked loops (PLLs) for clock management, and 508 user I/O pins supporting LVTTL, LVCMOS, PCI, SSTL, and LVDS signalling standards. The 1.6 ns pin-to-pin propagation delay makes this part suitable for high-throughput bus bridging and datapath applications. Architecturally the APEX 20KC family is pin-compatible with the earlier APEX 20KE series and offers 25 to 35 percent higher design performance thanks to the 0.15 micron copper-interconnect process. The 672-ball FC-FBGA package provides high signal density for designs requiring hundreds of I/O, while MultiVolt I/O support allows the device to interface with 1.5 V, 1.8 V, 2.5 V, and 3.3 V logic without external level shifters. Typical applications include high-speed telecommunications backplanes, custom DSP and image-processing datapaths, PCI and PCI-X bus controllers, industrial automation controllers, and ASIC prototyping where the large LUT/memory mix of the APEX 20KC delivers an excellent balance of logic and on-chip storage. Engineers migrating legacy APEX 20KE designs benefit from the same 672-ball footprint and Quartus II design-flow compatibility. When designing with this part, pay close attention to power-rail sequencing of the 1.8 V core and the I/O supply, and follow Altera's decoupling guidelines for 672-ball FC-FBGA packages. Signal-integrity simulations are recommended for LVDS and SSTL interfaces operating above 100 MHz because the high I/O count concentrates switching currents near the package edges. This page synthesizes distributor pricing, drop-in same-package alternatives from the APEX 20K family, and practical design notes drawn from the original Altera datasheet and reference designs - context not aggregated on any single distributor page.

询价 联系我们
EP20K1000CF672I7 - APEX 20KC FPGA, 1M Gates, 672-BGA | Altera
EP20K1000CF672I7

EP20K1000CF672I7 - APEX 20KC FPGA, 1M Gates, 672-BGA | Altera

The Altera EP20K1000CF672I7 is a member of the APEX 20KC programmable logic device family, delivering 1,000,000 system gates and 38,400 logic elements in a 672-ball Fine-pitch Chip-Scale BGA (FC-FBGA) package. It is manufactured on a 0.15 µm CMOS process and operates from a single 1.8 V supply (range 1.71 V to 1.89 V), with a maximum internal frequency of 375.94 MHz and a propagation delay of approximately 1.4 ns. The device supports up to 508 user I/O lines plus 4 dedicated inputs, providing ample connectivity for data-path-intensive designs. An FPGA (Field-Programmable Gate Array) is a type of programmable logic device (PLD) containing an array of configurable logic blocks (LEs), embedded memory, and routing interconnects that can be re-programmed in the field. APEX 20KC sits in the hierarchy: FPGA -> programmable logic device -> logic IC -> integrated circuit. Within the broader system architecture, FPGAs function as glue logic, high-speed interface bridges, DSP accelerators, and rapid-prototyping silicon for ASIC verification, enabling time-to-market advantages over fixed-function ASICs. The EP20K1000CF672I7 integrates MultiCore architecture with embedded ESB (Embedded System Block) memory, four phase-locked loops (PLLs), and True-LVDS support across all I/O banks. The part is offered in the industrial temperature grade (-40 °C to +85 °C, indicated by the "I7" speed/temperature code) and supports in-system programmability via IEEE 1149.1 (JTAG) and the Altera passive serial configuration scheme, making it well-suited for production programming and field updates. Typical applications include high-throughput telecommunication backplanes, network switches, custom DSP pipelines, ASIC prototyping, and industrial control cards where the 1M-gate capacity and 672-ball BGA footprint deliver the integration density required for complex multi-channel designs. A key design consideration for this device is power planning - at full toggle rate the APEX 20KC can consume several watts, so a multi-layer PCB with dedicated power planes and adequate thermal vias under the BGA is recommended for reliable operation. This page consolidates distributor pricing, drop-in package-equivalent alternatives, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们
EP20K1000CF672I8 - APEX 20KC FPGA, 1M Gates, 672-FBGA | Intel
EP20K1000CF672I8

EP20K1000CF672I8 - APEX 20KC FPGA, 1M Gates, 672-FBGA | Intel

The Intel (formerly Altera) EP20K1000CF672I8 is a high-density APEX 20KC family FPGA delivering 1,000,000 system gates and 38,400 logic elements in a 672-pin FineLine BGA package. Built on a 0.15 µm CMOS process, it operates from a 1.71 V to 1.89 V core supply (1.8 V nominal) and supports up to 508 user I/O plus 4 dedicated inputs, giving designers ample pins for high-bandwidth parallel interfaces. An FPGA (Field-Programmable Gate Array) is a programmable logic device whose architecture sits between PALs/CPLDs (low-density, non-volatile, fixed interconnect) and ASICs (high-density, fixed-function, high NRE). The APEX 20KC family belongs to Intel's high-density SRAM-based programmable logic hierarchy: FPGA → programmable logic device → PLD → semiconductor. Because APEX 20KC cells are SRAM-backed, the device is re-programmable in-system and supports the MultiCore interconnect with embedded array blocks (EABs) for on-chip memory and constant storage. Key features include 1M system gates, 38,400 logic elements, embedded array blocks (EABs) for true dual-port RAM and FIFO, four phase-locked loops (PLLs) for clock management, and LVTTL/LVCMOS/PCI/SSTL/HSTL I/O standards. Internal performance supports designs up to 301.21 MHz, and the 672-ball FineLine BGA package uses a 1.00 mm ball pitch suited for high-density, multi-layer PCB layouts. The industrial temperature grade (-40 °C to +85 °C) and 8 ns pin-to-pin logic delay further broaden its applicability. Architecturally, the EP20K1000CF672I8 combines a fine-grained logic element fabric with coarse-grained EABs, allowing efficient implementation of wide datapath functions, FIFOs, and DSP-style multipliers without consuming excessive logic. The MultiCore interconnect provides predictable routing delays, which is essential for closing timing on multi-megahertz designs. Four PLLs support clock multiplication, division, and phase shifting, enabling multiple clock domains within a single device. Typical applications include telecommunications backplane glue logic, PCI/PCI-X bridge and bus-interface controllers, high-speed parallel DSP pre-processing, industrial motion control and vision processing, and replacement of multiple CPLDs and gate arrays with a single reconfigurable part. The 508 I/O count makes the EP20K1000CF672I8 well suited for legacy 32-bit/64-bit bus aggregation that would otherwise require several discrete components. When designing with this device, ensure all configuration pins (MSEL, nCONFIG, nSTATUS, CONF_DONE, DCLK) are pulled to the correct logic levels before power-up, and provide a stable 1.8 V supply with adequate bulk decoupling because SRAM-based FPGAs draw large inrush currents during configuration. Plan for JTAG (IEEE 1149.1) boundary-scan access to simplify board test.

询价 联系我们
EP20K1000CF672I8N - APEX 20KC FPGA 1M Gates 672-FBGA | Intel
EP20K1000CF672I8N

EP20K1000CF672I8N - APEX 20KC FPGA 1M Gates 672-FBGA | Intel

The Intel (formerly Altera) EP20K1000CF672I8N is a high-density APEX 20KC family FPGA delivering 1,000,000 system gates and 38,400 logic elements in a 672-pin Flip-Chip FineLine BGA package. Built on a 0.15 µm CMOS process, the device operates from a 1.8 V core supply and is rated for industrial temperature operation. The "I8" speed grade combined with the "N" lead-free suffix identifies it as the industrial-temperature, lead-free / RoHS-compliant variant intended for long-lifecycle embedded designs. An FPGA (Field-Programmable Gate Array) is a programmable logic device that lets engineers implement custom digital circuits through a configurable array of logic elements, embedded memory blocks, and high-speed I/O, all wired together by a programmable interconnect. Within the broader programmable-logic taxonomy, the APEX 20KC family sits at the high-density, multiplier-rich tier used for DSP pipelines, communications backplanes, and protocol-bridging ASIC replacements, sitting between CPLDs and ASICs in cost-versus-flexibility trade-offs. Key features of the EP20K1000CF672I8N include up to 301.21 MHz internal operation, on-chip embedded system blocks (ESBs) for memory and dual-port RAM, true LVDS I/O support on selected banks, and built-in boundary-scan (JTAG 1149.1) for in-system configuration and test. Multipliers are integrated into the ESB architecture, making the part well suited to fixed-point DSP and FEC applications. The 672-ball FC-FBGA package exposes the full high-speed I/O count and the maximum number of ESBs, both of which are key differentiators versus smaller-footprint APEX 20K siblings. Typical applications include telecom line-card glue logic, high-speed serial protocol bridges, military/aerospace signal processing, and legacy industrial control retrofits. The APEX 20K architecture remains a popular target for legacy Quartus II design flows still in production at long-lifecycle OEMs. Because the APEX 20KC family is approaching end-of-life on Intel's roadmap, designers planning new programs should evaluate Cyclone IV/V or MAX 10 as modern migration targets, while existing boards can continue using this part for repair and sustainment. When designing with this device, pay close attention to multi-rail power sequencing (1.8 V VCCINT and 3.3 V VCCIO), proper decoupling per the Altera reference board, and JTAG-driven configuration via the ByteBlasterMV or USB-Blaster download cable. This page synthesizes distributor pricing, drop-in alternatives within the APEX 20K family, and practical design notes not found in the original datasheet.

询价 联系我们
EP20K1000CF672I9 - APEX 20KC 1M-Gate FPGA, 672-BGA | Intel
EP20K1000CF672I9

EP20K1000CF672I9 - APEX 20KC 1M-Gate FPGA, 672-BGA | Intel

The Intel EP20K1000CF672I9 is a member of the APEX 20KC family of high-density SRAM-based FPGAs, integrating 1,000,000 system gates and 38,400 logic elements in a 672-ball FineLine BGA (FC-FBGA) package. The device is built on a 0.15 µm CMOS process, operates from a 1.71 V to 1.89 V core supply with a 1.8 V nominal, and supports up to 508 user I/O plus 4 dedicated inputs, making it one of the largest APEX 20KC variants available. An FPGA (Field-Programmable Gate Array) is a reprogrammable logic device in the programmable-logic IC hierarchy, sitting between complex PLDs and full custom ASICs. The APEX 20KC family combines Look-Up-Table (LUT)-based logic, embedded system blocks (ESBs) for memory and product-term logic, and a continuous, SRAM-based interconnect fabric, allowing designers to implement glue logic, datapath, memory, and bus interfaces on a single device. Positioned between CPLDs and structured ASICs, APEX 20KC was used in networking, telecom, and DSP-heavy designs of its era. Key features of the EP20K1000CF672I9 include 1,000,000 typical gates, 38,400 logic cells, 250 MHz internal performance, embedded array blocks for distributed RAM and ROM, and MultiVolt I/O support for interfacing with 1.8 V, 2.5 V, 3.3 V, and 5.0 V logic. The 'I' speed grade and industrial temperature suffix (-40 °C to +85 °C) suit industrial embedded applications. The 672-ball FineLine BGA package provides high board density and ample signal breakout for the 508 I/O count. Architecturally, the device uses a four-level hierarchical interconnect (MegaLAB, LAB, ESB, LE) with dedicated carry chains and cascade paths for arithmetic and high-speed datapath operations. Each embedded system block can be configured as a dual-port RAM, FIFO, or CAM, providing up to 540 Kibits of embedded memory without consuming logic resources. The 0.15 µm CMOS process was Intel's high-density node for APEX generation devices. Typical applications include high-speed data-path bridging, telecom backplane interfaces, DSP co-processing cards, industrial control boards, and ASIC prototyping. The high logic capacity and embedded memory make it suitable for multi-channel protocol converters, RAID controllers, and legacy networking line-card designs where pin compatibility with the APEX 20K family is required. When designing with the EP20K1000CF672I9, plan for multi-rail power sequencing (1.8 V core plus I/O banks), provide a JTAG header for in-system programming, and follow Altera AN-114 (Guidelines for APEX 20K Board Layout) for BGA escape and decoupling. The 672-ball FC-FBGA requires a 4-6 layer PCB with microvia or via-in-pad fan-out to maintain signal integrity at high toggle rates. This page synthesizes distributor pricing, APEX 20KC drop-in alternatives from the same family, and practical board-layout guidance not aggregated on a single manufacturer page, helping engineers source and integrate this legacy FPGA quickly.

询价 联系我们
EP20K1000CF672I9N - 1M Gate APEX 20KC FPGA 672-FBGA | Altera
EP20K1000CF672I9N

EP20K1000CF672I9N - 1M Gate APEX 20KC FPGA 672-FBGA | Altera

The Altera (Intel) EP20K1000CF672I9N is a high-density APEX 20KC family FPGA delivering 1,000,000 system gates and 38,400 logic elements in a 672-ball FineLine BGA package. It is fabricated on a 0.15 µm CMOS process, operates from a 1.8 V core supply, and supports I/O standards up to LVTTL/LVCMOS with a maximum internal clock frequency of 250 MHz. An FPGA (Field-Programmable Gate Array) is a type of programmable logic device (PLD) — a semiconductor IC whose logic function is defined by the customer after manufacture. FPGAs sit at the top of the programmable logic hierarchy: PLD → CPLD → FPGA → System-on-Chip FPGA. They integrate configurable logic blocks (LABs), embedded memory (ESBs), and interconnect, and are used as flexible hardware platforms for digital signal processing, glue logic, and high-speed parallel processing. Key features of the EP20K1000CF672I9N include 38,400 logic cells, 384 maximum user I/O pins, embedded system blocks (ESBs) for on-chip RAM/CAM, dedicated clock management with up to four phase-locked loops (PLLs), and MultiVolt I/O supporting 1.8 V, 2.5 V, and 3.3 V interfaces. The 672-ball FineLine BGA package exposes the full I/O count and provides a thermally enhanced die-up substrate for improved heat dissipation. JTAG boundary-scan support (IEEE 1149.1) is provided for in-system programming and board-level test. Architecturally, the APEX 20KC combines a lookup-table (LUT)-based logic fabric with embedded system blocks that can each be configured as dual-port RAM, single-port RAM, ROM, or content-addressable memory (CAM). This hybrid LUT+ESB architecture lets designers implement both random logic and datapath/memory blocks on a single die without external SRAM. The 0.15 µm process gives a speed-grade advantage over the older APEX 20K family while remaining in-system programmable via SRAM configuration cells. Typical applications include telecommunications line cards, high-speed image and video processing pipelines, industrial motor control and factory automation controllers, military/aerospace signal processing (in conjunction with the corresponding -I industrial temperature grade), and ASIC prototyping where design teams validate million-gate designs before committing to mask production. When designing with this device, the design engineer must select the correct speed grade (-9 is the fastest), observe LVTTL/LVCMOS I/O bank power sequencing, and use Altera Quartus II for synthesis, place-and-route, and bitstream generation. Configuration memory is volatile — the device must be re-loaded from a PROM or microcontroller on every power-up. This page synthesizes distributor pricing, same-brand speed-grade and package alternatives from the APEX 20KC family, and practical design notes not consolidated in any single manufacturer document.

询价 联系我们
EP20K1000EBC652-2X - 1M Gate APEX-20KE FPGA, 488 I/O, 652-BGA | Altera (Intel)
EP20K1000EBC652-2X

EP20K1000EBC652-2X - 1M Gate APEX-20KE FPGA, 488 I/O, 652-BGA | Altera (Intel)

The Altera (now Intel) EP20K1000EBC652-2X is a member of the APEX-20KE family of Field-Programmable Gate Arrays (FPGAs) offering 1,000,000 system gates, 38,400 logic elements, and 327,680 bits of embedded memory in a 652-pin FineLine BGA package. Manufactured on a 0.22 µm (some sources list 0.15 µm) all-layer copper-metal process, the device delivers up to 350 MHz internal operation and a 1.6 ns propagation delay, targeting high-performance logic design and embedded processing subsystems. What is an FPGA? A Field-Programmable Gate Array is a semiconductor IC containing a matrix of configurable logic blocks (CLBs), programmable interconnect, and dedicated I/O cells that the designer can configure after manufacture. FPGAs sit between general-purpose microcontrollers (fixed instruction set) and full-custom ASICs (fixed silicon), offering hardware-level parallelism with rapid design iteration. APEX-20KE is Altera's second-generation multi-core architecture (MultiCore) combining look-up table logic with embedded memory (ESBs) and a high-bandwidth bus network for on-chip data movement. Key features of the EP20K1000EBC652-2X include 488 user I/O pins supporting multiple single-ended and differential I/O standards (LVTTL, LVCMOS, PCI, GTL+, LVDS), four Phase-Locked Loops (PLLs) for clock synthesis and skew management, embedded system blocks (ESBs) for FIFO and dual-port RAM, and a 1.8 V core supply. The device supports in-system programmability via passive serial, JTAG (IEEE 1149.1), and Altera-style configuration modes. Typical applications for this FPGA include telecommunications infrastructure (ATM switches, SONET/SDH framers, line cards), high-speed data acquisition systems, custom DSP pipelines, image and video processing cards, and embedded compute co-processors. The wide I/O count (488) and generous memory bandwidth make the EP20K1000EBC652-2X well suited to multi-channel interfaces and bus-bridging designs. When designing with the EP20K1000EBC652-2X, engineers should plan for multi-layer PCB stack-ups to route the 652-ball BGA fan-out, provide decoupling at the core and I/O banks per the Altera pin connection guidelines, and validate signal integrity on high-speed LVDS or GTL+ channels. Legacy Quartus II (Altera) design software is required for synthesis and place-and-route. This page synthesizes distributor inventory, drop-in same-package alternatives (same 652-BGA footprint, same APEX-20KE logic capacity), and practical design notes for legacy replacement scenarios not found in the manufacturer datasheet alone.

询价 联系我们
EP20K1000EBI652-2 - APEX 20KE 1M Gates FPGA, BGA-652 | Intel / Altera
EP20K1000EBI652-2

EP20K1000EBI652-2 - APEX 20KE 1M Gates FPGA, BGA-652 | Intel / Altera

The Intel / Altera EP20K1000EBI652-2 is a high-density APEX 20KE family FPGA delivering 1,000,000 system gates and 38,400 logic elements in a 652-ball FineLine BGA package. Speed grade -2 indicates a -2 speed bin with the Industrial temperature range (-40C to +100C operating), and the device supports up to 488 user I/O for high-bandwidth parallel interface designs. The device is built on a 0.18 micrometer CMOS process with all-layer copper interconnect. A Field-Programmable Gate Array (FPGA) is a reprogrammable digital logic IC that lets designers implement custom combinational and sequential logic, memory blocks, and high-speed I/O by downloading a configuration bitstream. Within the broader semiconductor taxonomy, FPGAs sit under programmable logic devices (PLD) alongside CPLDs. APEX 20KE is the second-generation APEX family that introduced embedded system blocks (ESBs) for dual-port RAM and CAM, fast row/column interconnect, and True-LVDS support to bridge the gap between traditional FPGAs and ASIC-class system-on-chip designs. Key specifications include 1,000,000 typical gates, 38,400 logic elements, 384 Kbits of embedded system block memory, 12 embedded multiplier/accumulator blocks, and 4 Phase-Locked Loops (PLLs). The -2 speed grade delivers approximately 350 MHz internal operation and 1.6 ns propagation delay, while the Industrial temperature range (suffix I) ensures operation across -40C to +100C. The 652-ball FineLine BGA measures 45 x 45 mm with 1.27 mm ball pitch and offers 488 user I/O pins, with each I/O supporting multiple I/O standards including LVTTL, LVCMOS, SSTL, HSTL, AGP, CTT, and True-LVDS. The architecture combines a MultiCore architecture that fuses look-up tables, product-term logic, and embedded memory into a unified fabric. The 4 PLLs provide on-chip clock multiplication, division, phase shifting, and skew control. Configuration is supported via passive serial (PS), passive parallel synchronous (PPS), passive parallel asynchronous (PPA), and JTAG modes, allowing in-system programmability via standard configuration EPROMs or microprocessor interfaces. Typical applications include telecommunications line cards and cross-connects, high-speed image and video processing pipelines, network routers and switches, DSP co-processing, custom peripheral bridges, and ASIC prototyping. The 488 user I/O enable direct parallel bus connection to microprocessors, memory controllers, and backplane transceivers. When designing with this device, ensure the 652-ball BGA land pattern uses 1.27 mm pitch with non-solder-mask-defined (NSMD) pads for reliable assembly. Configuration must be planned using a configuration device such as the EPC2 or EPC16, or a microprocessor host. Signal integrity on 488 simultaneous switching I/Os requires careful power-plane decoupling and ground-bounce management. This page consolidates distributor pricing, drop-in same-family alternatives, and engineering design notes that complement the official Altera datasheet. All data points are cross-referenced to distributor listings current as of 2026-09-07.

询价 联系我们
EP20K1000EFI672-2X - 1M Gate APEX-20KE FPGA 672-BGA | Intel
EP20K1000EFI672-2X

EP20K1000EFI672-2X - 1M Gate APEX-20KE FPGA 672-BGA | Intel

The Intel (formerly Altera) EP20K1000EFI672-2X is a high-density APEX-20KE family Field Programmable Gate Array (FPGA) delivering 1,000,000 system gates, 38,400 logic elements (cells), and 327,680 embedded system blocks in a 652-ball FineLine BGA (672-BBGA, 45x45 mm, 1.27 mm pitch) package. It is specified for commercial 0C to 85C operation at speed grade -2X and is fabricated on a 0.15 micron all-layer copper-metal process that yields up to 35% faster design performance than earlier APEX 20K devices. An FPGA (Field Programmable Gate Array) is a semiconductor integrated circuit built around an array of configurable logic blocks (CLBs), embedded memory, embedded multipliers or DSP blocks, and a programmable interconnect fabric. FPGAs occupy the high-density tier of programmable logic devices, sitting above CPLDs and below ASICs in the taxonomy of digital logic ICs: programmable logic device (PLD) -> CPLD -> FPGA -> ASIC. APEX-20KE devices specifically combine look-up-table based logic with embedded array blocks (EABs) that can act as RAM, ROM, or FIFO memory. Key features include 508 user I/Os, 2560 macrocells, 1.6 ns propagation delay, multi-volt I/O support (1.8V, 2.5V, 3.3V) on a 1.8V core supply, embedded CAM and RAM, four phase-locked loops for clock management, and JTAG-based IEEE 1149.1 boundary-scan testing. The device integrates LVDS, LVTTL, LVPECL, and PCI-compatible I/O standards, enabling direct interfacing with high-speed peripherals and backplanes. The EP20K1000EFI672-2X uses a symmetric LUT-based architecture with embedded system blocks (ESBs) that can be configured individually as either logic or memory. Its high gate count, 488 pins of user I/O, and embedded multipliers make it suited for DSP pipelines, custom processor implementations, and high-bandwidth glue logic. Compared with smaller APEX-20KE siblings, this 1M-gate device is the densest in the family. Typical applications include telecom line cards, network routers, custom DSP accelerators, high-speed image processing pipelines, and industrial control processors. The wide I/O count also makes it usable as a multi-protocol bridge or as a system-on-chip integrator in legacy 32-bit and 16-bit processor designs. When designing with this part, plan power sequencing carefully because the 1.8V core and multi-voltage I/O rails ramp independently; use the JTAG port for in-system programming and rely on the four PLLs to derive multiple clock domains without external clock buffers. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that supplement the manufacturer datasheet and help engineers shorten the selection cycle.

询价 联系我们
EP20K100BC356-1 - APEX-20K FPGA 100K Gates 356-BGA | Intel
EP20K100BC356-1

EP20K100BC356-1 - APEX-20K FPGA 100K Gates 356-BGA | Intel

The Intel (Altera) EP20K100BC356-1 is a member of the APEX-20K family of Field Programmable Gate Arrays (FPGAs) that combines logic, embedded system blocks (ESBs), and high-speed I/O in a single programmable device. The APEX-20K family uses a 0.15-micrometer all-layer copper-metal CMOS process, fabricated on a 35x35 mm 356-pin LBGA substrate, and integrates 53,248 bits of embedded RAM with up to 4,160 logic elements. An FPGA (Field Programmable Gate Array) is a semiconductor integrated circuit that can be configured by the customer or designer after manufacturing to implement any digital logic function. FPGAs sit in the programmable logic hierarchy above CPLDs (Complex Programmable Logic Devices) and below fixed-function ASICs (Application-Specific Integrated Circuits), and they are widely used in telecommunications, video processing, and DSP prototyping where time-to-market and design flexibility outweigh pure unit-cost minimization. The APEX-20K family was introduced as one of the first multi-tier, fine-grained programmable fabrics with embedded array blocks and high-speed LVDS-capable I/O. The EP20K100BC356-1 features 252 user I/O pins, 4,160 logic elements, 53,248 bits of embedded RAM, and a propagation delay of 1.6 ns at the standard -1 speed grade. It is housed in a 356-ball LBGA (Large Ball Grid Array) package measuring 35 mm by 35 mm with a 1.27 mm pitch. The device operates from a 1.71 V to 1.89 V core supply (typical 1.8 V) with separate VCCIO banks for I/O voltage flexibility. Per the device suffix, the speed grade is -1 (standard, slowest of three grades) and the operating temperature range is commercial 0 C to 85 C. Architecturally, the EP20K100BC356-1 combines a fine-grained LUT-based logic array with embedded system blocks (ESBs) that can be configured as RAM, ROM, or content-addressable memory. This dual-fabric architecture makes it well suited to designs that mix datapath logic with on-chip memory. The device supports JTAG (IEEE 1149.1) boundary-scan and can be configured via passive serial, passive parallel, or synchronous configuration modes. Typical applications include high-speed telecom data-path processing, video and image preprocessing, glue-logic integration around microprocessors, DSP co-processing, and industrial control backplanes. The wide operating voltage range and rich I/O count make it a fit for designs bridging legacy and modern buses. Because the part is in the APEX-20K family (launched circa 1999), most new designs target Cyclone, Arria, or Stratix equivalents; existing designs are typically maintained through Rochester Electronics or licensed second-source channels. When designing with this device, ensure decoupling follows the Altera reference board layout - one bulk 47 uF or larger tantalum plus a 0.1 uF ceramic per VCC pin pair is typical. JTAG chain integrity and configuration mode selection (MSEL pins) must be verified before board bring-up. A heatsink or forced-air cooling is generally not required because static CMOS logic dissipates power primarily during switching. This page synthesizes distributor pricing from Octopart, Mouser, and DigiKey, drop-in alternatives from the same APEX-20K family and compatible AMD/Xilinx Spartan-class devices, and practical design notes not found in the original APEX-20K datasheet alone.

询价 联系我们
EP20K100CB356C7 - APEX20K FPGA 100K Gates 252 I/O 356-BGA | Intel
EP20K100CB356C7

EP20K100CB356C7 - APEX20K FPGA 100K Gates 252 I/O 356-BGA | Intel

The Intel (formerly Altera) EP20K100CB356C7 is a member of the APEX20K family of programmable logic devices, integrating 100,000 typical gates and 53,248 maximum logic elements into a 356-ball LBGA package. It is a high-density SRAM-based FPGA combining look-up tables (LUTs), product-term logic, and embedded system blocks (ESBs) for on-chip memory and FIFO functions. The device targets applications that require both high logic density and embedded memory in a single chip. An FPGA (Field Programmable Gate Array) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnects, and programmable I/O cells. FPGAs sit in the broader category of programmable logic devices (PLDs) within the integrated circuit (IC) taxonomy, and they are commonly used for digital signal processing, glue logic, prototyping ASICs, and embedded control. APEX20K devices specifically combine fine-grained LUT-based logic with coarse-grained embedded array blocks (EABs), giving designers a hybrid fabric for both arithmetic and memory-intensive tasks. Key features of the EP20K100CB356C7 include 100K typical gates (53,248 maximum logic elements), 252 user I/O pins, embedded array blocks providing up to 53,248 RAM bits, MultiVolt I/O support for interfacing with 1.8V, 2.5V, 3.3V, and 5V systems, in-system programmability via the IEEE 1149.1 JTAG interface, and four phase-locked loops (PLLs) for clock management. The 356-ball LBGA package supports high pin-out density for memory and bus-rich designs. The architecture relies on a 0.18 μm CMOS process with a 2.5V core supply. Logic elements interconnect via a hierarchical routing network, and embedded system blocks can be configured as RAM, ROM, or FIFO. This makes the EP20K100CB356C7 suitable for designs that mix control logic, datapath arithmetic, and moderate on-chip buffering without resorting to external memory. Typical applications include telecom line cards, industrial automation controllers, networking equipment, ASIC prototyping, and high-speed instrumentation. The PLLs and MultiVolt I/O make it well suited to bridging between legacy 5V peripherals and modern 1.8V processors. When designing with the EP20K100CB356C7, ensure JTAG chain integrity and proper PLL supply decoupling. The device is programmed using Altera Quartus II or MAX+PLUS II toolchains; firmware must configure all I/O standards and pin assignments before user logic operation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not commonly consolidated in the manufacturer datasheet.

询价 联系我们
EP20K100CB356C7ES - APEX20K 100K Gate FPGA | Intel | 356-BGA
EP20K100CB356C7ES

EP20K100CB356C7ES - APEX20K 100K Gate FPGA | Intel | 356-BGA

The Intel EP20K100CB356C7ES is a member of the APEX20K family of SRAM-based, multi-standard FPGAs, integrating 263,000 gates (100,000 typical gates, 4,160 logic elements) with 252 user I/O pins in a 356-ball BGA package. This industrial-grade device delivers flexible programmable logic with built-in ES (Embedded System) features, targeting high-performance DSP and datapath-intensive designs. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing configurable logic blocks (CLBs), programmable interconnects, and I/O cells that can be re-programmed after manufacturing. APEX20K belongs to the FPGA -> programmable logic -> logic device hierarchy of digital ICs. Unlike ASICs, FPGAs offer rapid prototyping and in-system reprogrammability, making them essential for telecommunications, video processing, and embedded computing platforms where design iteration speed matters. Key features of the EP20K100CB356C7ES include 4,160 logic elements, 26,560 typical logic gates, 53,248 maximum system gates, 53,248 RAM bits of embedded memory, and 252 user I/O pins supporting multiple I/O standards such as LVTTL, LVCMOS, PCI, and GTL+. The device operates from a 1.8 V core supply with 3.3 V/2.5 V I/O compatibility and includes on-chip PLL clock management. Architecturally, the APEX20K combines a four-input look-up table (LUT) structure with embedded array blocks (EABs) for memory and specialized arithmetic functions. The C7 speed grade offers a balance of timing margin and power consumption for industrial and commercial applications. The device is configured via JTAG (IEEE 1149.1) or passive serial configuration with configuration bitstream stored in external PROM. Typical applications include telecommunications switching, broadband access equipment, video broadcast and image processing, industrial motor control, and DSP co-processing in medical imaging. With its high I/O count and embedded memory, the EP20K100CB356C7ES is well suited for multi-channel data acquisition and protocol bridging designs. When designing with the APEX20K family, pay close attention to power sequencing - the core 1.8 V supply must ramp before I/O supplies to avoid latch-up. The Quartus development toolchain (legacy MAX+PLUS II for older designs) supports this device, providing synthesis, place-and-route, and timing analysis. Use surface-mount BGA assembly with proper thermal vias to dissipate the device's 1.5-2 W typical power. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们
EP20K100CB356C8 - APEX-20K 100K-Gate FPGA, 356-BGA | Intel
EP20K100CB356C8

EP20K100CB356C8 - APEX-20K 100K-Gate FPGA, 356-BGA | Intel

The Intel (formerly Altera) EP20K100CB356C8 is a member of the APEX 20K family of high-density SRAM-based Field-Programmable Gate Arrays, integrating 100,000 typical gates in a 356-ball LBGA package. It is fabricated on a 0.18 µm CMOS process and combines look-up table (LUT) logic with embedded array blocks (EABs) that can each implement up to 2 Kbits of dual-port RAM, ROM, or first-in-first-out (FIFO) memory. The device also includes four phase-locked loops (PLLs) for clock management and supports multi-voltage I/O operation on a per-pin basis. A Field-Programmable Gate Array (FPGA) is a type of integrated circuit that can be reprogrammed after manufacture to implement arbitrary digital logic, occupying a position in the programmable-logic hierarchy between simple programmable logic devices (SPLDs/CPLDs) and application-specific integrated circuits (ASICs). Within Intel's programmable solutions portfolio, the APEX 20K family predates the Cyclone and Arria series, and is now classified as a mature legacy device. EP20K100CB356C8 occupies the lower-density tier of the APEX 20K lineup, while sharing the same Quartus development-tool ecosystem and the same embedded-memory philosophy used in subsequent families. Key features of the EP20K100CB356C8 include 4,160 logic elements, 12 EABs providing 24 Kbits of embedded memory, a maximum of 252 user I/O pins, and four PLLs with up to six clock outputs. The device supports LVTTL, LVCMOS, SSTL, and GTL+ I/O standards via MultiVolt I/O and operates from a core supply of 1.8 V. Configuration is supported through passive serial (PS), passive parallel synchronous (PPS), passive parallel asynchronous (PPA), and JTAG modes, and the device is in-system programmable via IEEE 1532. The 356-ball LBGA package exposes a large number of user I/O and high-speed clock pins while providing a controlled-impedance substrate for high-speed signals. The on-chip PLLs enable frequency synthesis, phase shifting, and clock-skew management, which is essential for synchronous designs with multiple clock domains. The 0.18 µm process and embedded array block architecture deliver a favourable logic-to-memory ratio for datapath-intensive designs such as DSP filters, FIFO buffers, and bus-interface bridges. Typical applications include telecommunications line cards, industrial automation controllers, ASIC prototyping, glue-logic and bus-bridging designs, and legacy upgrades of designs that were originally implemented on APEX 20K silicon. Designers migrating to a current Intel FPGA should consider Cyclone IV/V or MAX 10 as the recommended modern equivalents, depending on logic, memory, and I/O requirements. When designing with this device, note that the 1.8 V core supply is internally generated by an on-chip voltage regulator when the 2.5 V VCCINT is applied, but the PLL analog supply and the JTAG pull-up voltage still require dedicated rails. Ensure the JTAG chain is terminated correctly and that the configuration scheme matches the system boot timing, as the APEX 20K family uses a 16-bit-wide passive-parallel mode in addition to the more common serial modes.

询价 联系我们
EP20K100CB356C8ES - APEX 20K 100K Gates 356-BGA FPGA | Intel
EP20K100CB356C8ES

EP20K100CB356C8ES - APEX 20K 100K Gates 356-BGA FPGA | Intel

The Intel (formerly Altera) EP20K100CB356C8ES is an APEX 20K family Field-Programmable Gate Array (FPGA) housed in a 356-ball Fine-Pitch Ball Grid Array (BGA) package. The device integrates 100,000 typical gates, 4,160 logic elements, and 252 user I/O pins, delivering a logic density that targets glue-logic replacement, bus bridging, and medium-complexity DSP glue in industrial and telecom designs. An FPGA (Field-Programmable Gate Array) is a semiconductor device built around an array of configurable logic blocks (CLBs), embedded memory blocks, and programmable interconnects that the designer can rewire after manufacture. APEX 20K sits within the broader taxonomy: FPGA -> programmable logic device (PLD) -> logic IC -> integrated circuit -> semiconductor. The EP20K100C variant delivers moderate logic capacity with embedded array blocks (EABs) suitable for memory, ROM, and specialized arithmetic functions, while the broader APEX 20K family combines look-up-table (LUT) logic with EABs on a single die. Key features of the EP20K100CB356C8ES include 100K typical gates, 4,160 logic elements, 26 EABs providing approximately 53,248 RAM bits, 252 maximum user I/O, multi-standard I/O support including LVTTL, LVCMOS, PCI, and GTL+, and an 8 ns speed grade (suffix "8") with commercial operating temperature range (suffix "C"). The "ES" suffix denotes an Engineering Sample, intended for prototype evaluation and pre-production builds rather than volume manufacturing. Technically, the device uses a 0.18 µm CMOS SRAM process with 5-metal-layer routing, supports in-system programmability via the IEEE 1149.1 JTAG interface and the Altera ByteBlaster/USB-Blaster configuration schemes, and operates from a 2.5 V core / 3.3 V I/O supply. The architecture combines logic elements with embedded array blocks to implement wide datapath functions, FIFO buffers, and content-addressable memory. Typical applications include telecommunications line cards, industrial control glue logic, PCI bus bridges, and legacy design maintenance. The wide I/O count makes it suitable for memory controller hubs and backplane interface bridges. Compared with newer low-cost Cyclone or modern Agilex families, the APEX 20K series is now primarily a legacy/maintenance component. When designing with this device, account for the legacy 2.5 V core rail requirement and verify Quartus II support version compatibility - Quartus II 9.0 or earlier is the recommended toolchain. Engineering samples should not be used for production qualification; request the production-grade variant (without "ES") for volume builds. This page synthesizes distributor pricing, drop-in alternatives within the APEX 20K family, and practical design notes for legacy FPGA maintenance not found in the original datasheet alone.

询价 联系我们
EP20K100CB356C9 - 252-I/O APEX-20K FPGA | Intel | Embedded Logic
EP20K100CB356C9

EP20K100CB356C9 - 252-I/O APEX-20K FPGA | Intel | Embedded Logic

Intel EP20K100CB356C9 is a high-performance EPROM-based field-programmable gate array in the APEX-20K family, providing 252 user I/O connections and a 356-ball Ball Grid Array package. The verified data identifies the part as an FPGA with 252 I/O and a 356BGA package, supporting high-density embedded and programmable-logic designs. The device belongs to the APEX-20K architecture, an early programmable-logic family combining FPGA flexibility with structured embedded-system integration capabilities. An FPGA, or field-programmable gate array, is a semiconductor device whose logic function is configured after manufacturing. FPGAs occupy the programmable-logic branch of the integrated-circuit hierarchy, above fixed-function logic and below or alongside processors in configurable digital systems. Their architecture generally includes configurable logic blocks, programmable interconnects, and configurable I/O resources. The APEX-20K family extends that model toward embedded system-on-programmable-chip applications, where designers can implement interfaces, control logic, datapaths, and other digital functions in one configurable device. The verified specifications identify 252 user I/O pins and a 356-ball BGA package. A 356-ball package provides a high pin count for programmable I/O, power, configuration, and other device functions, while the BGA format supports dense surface-mount routing and controlled electrical connections. The part is also described as an embedded FPGA, making it relevant to systems that need hardware-level concurrency, deterministic logic, and post-manufacture functional configuration. Verified data does not provide logic-element count, memory capacity, operating voltage, speed grade, temperature range, or configuration details, so those parameters remain unstated rather than inferred from the family name. The APEX-20K architecture is associated with programmable logic and embedded applications. Engineers should preserve the original configuration flow, pin assignment, I/O electrical settings, clocking scheme, and printed-circuit-board escape strategy when designing a replacement. Although several APEX-20K-family part numbers appear in the site MPN list, the available substitute data does not establish that any candidate is pin-compatible and electrically interchangeable with the target. A replacement therefore requires manufacturer cross-reference verification, datasheet comparison, footprint review, and timing or functional-equivalence testing. Typical verified or implied use cases include embedded control systems, high-density digital interfaces, industrial electronics, and communications or computing equipment requiring programmable hardware. The 252-I/O capability is particularly useful when many external signals must be connected to configurable logic. Designers should not treat the I/O count as a substitute for required I/O standards, voltage levels, timing margins, or package-ball verification. For new designs, confirm the complete electrical and mechanical requirements before selecting EP20K100CB356C9. For legacy replacement programs, first verify the exact package, ball map, configuration interface, power requirements, and supported design tools. The verified web results show distributor availability and quote-based purchasing, but they do not provide a complete manufacturer datasheet or all electrical characteristics. This product data combines verified package, I/O, inventory, and distributor information with explicit markers for unavailable specifications. It also distinguishes observed source facts from engineering considerations, helping procurement, design, and maintenance teams avoid assuming compatibility from a family name or similar product description.

询价 联系我们
EP20K100CF144C7 - APEX-20K FPGA 100K LE 144-LQFP | Intel
EP20K100CF144C7

EP20K100CF144C7 - APEX-20K FPGA 100K LE 144-LQFP | Intel

The Intel EP20K100CF144C7 is a member of the APEX-20K Field Programmable Gate Array family, providing approximately 100,000 system gates with 4,160 logic elements (LEs) and 53,248 bits of embedded system memory (ESB) in a 144-pin LQFP package. The device features 93 user I/O pins and is built on a 0.18-micron CMOS SRAM process with in-system programmability via IEEE 1149.1 JTAG and passive serial configuration modes. This C7 speed grade part is qualified for commercial operating temperature range of 0C to +85C. An FPGA (Field Programmable Gate Array) is a type of programmable logic device that allows engineers to implement custom digital circuits after PCB fabrication. FPGAs sit within the programmable logic hierarchy: FPGA -> programmable logic -> digital IC -> semiconductor. Unlike fixed-function ASICs, FPGAs are reconfigured in-circuit using HDL design flows, making them ideal for prototyping, low-volume production, and designs requiring late-stage hardware changes. The APEX-20K family further extends this with embedded memory blocks and a MultiCore architecture supporting fine-grain logic, embedded array blocks, and high-speed I/O. Key features of the EP20K100CF144C7 include 4,160 logic elements organized as Logic Array Blocks (LABs), 53,248 RAM bits distributed across embedded system blocks, 93 user I/O pins supporting LVTTL, LVCMOS, PCI, SSTL, and GTL+ I/O standards, four phase-locked loops (PLLs) for clock management, and dual-purpose configuration pins. The 144-pin LQFP package measures 22x22 mm with a 0.5 mm lead pitch and is suitable for surface-mount assembly on standard FR4 PCB substrates. Architecture-wise, the APEX-20K device combines a fine-grain logic fabric for register-intensive functions with embedded array blocks (EABs) optimized for memory and arithmetic. The device supports true dual-port RAM, FIFO, and CAM implementations via dedicated memory structures. I/O banks are powered by VCCIO rails that can be set independently from the core VCCINT supply, allowing mixed-voltage interfacing. Typical applications for this FPGA include telecommunications line cards, industrial control logic, test and measurement front-ends, low-density glue logic replacement, and ASIC prototyping. Designers select the EP20K100CF144C7 when a low-to-moderate logic density device with embedded memory and a pin-compatible surface-mount package is required for commercial-temperature deployments. Legacy designs originally specified around the APEX-20K family continue to source this part for long-lifecycle field support. When designing with this FPGA, allocate sufficient PCB area for decoupling capacitors near every VCCINT and VCCIO pin, and follow Intel/Altera configuration guidelines for the MSEL pin strapping. The 144-pin LQFP package has moderate thermal performance; thermal management is rarely required at typical APEX-20K operating frequencies but should be verified with junction-temperature calculation in high-utilization designs. This page synthesizes distributor pricing, exact-package drop-in alternatives from the APEX-20K family, and practical configuration/PCB guidance not consolidated on a single manufacturer datasheet.

询价 联系我们
EP20K100CF144C7ES - APEX-20K 100K Gate FPGA 93 I/O 144-LQFP | Intel
EP20K100CF144C7ES

EP20K100CF144C7ES - APEX-20K 100K Gate FPGA 93 I/O 144-LQFP | Intel

The Intel EP20K100CF144C7ES is a member of the APEX-20K family of Field Programmable Gate Arrays (FPGAs), integrating 100,000 typical gates with 4,160 logic elements and 53,248 bits of embedded memory in a 144-pin LQFP package. Housed in a 144-LQFP (20x20 mm) package with 93 user I/O pins, this device targets complex digital designs requiring high integration density and flexible I/O. An FPGA (Field Programmable Gate Array) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnect, and I/O cells, all of which can be reconfigured by the end user after manufacture. FPGAs sit in the broader taxonomy of programmable logic devices (PLDs), which includes CPLDs and SPLDs as smaller predecessors. Within Intel's (formerly Altera's) portfolio, APEX-20K belongs to the multi-core architecture family that preceded Stratix, combining Look-in Table (LUT) logic with embedded memory blocks called ESBs (Embedded System Blocks). Key features of the EP20K100CF144C7ES include 100K typical gates (equivalent to approximately 53K logic elements usable for design), 4,160 actual logic elements, 53,248 RAM bits distributed across embedded system blocks, four Delay-Locked Loops (DLLs) for clock management, and multi-level interconnect with 4 dedicated FastTrack lines. The device operates from a 1.8V core supply with 3.3V or 5V tolerant I/O via banked voltage references. The 'C7' speed grade places it in a commercial-temperature, mid-speed bin, while the 'ES' suffix indicates an engineering sample / special-order variant. The APEX-20K architecture combines fine-grained LUT logic with coarse-grained ESB memory, allowing designers to implement both random logic and memory-intensive functions such as FIFOs, CAMs, and dual-port RAMs in a single device. Four DLLs provide zero-delay clock buffering and frequency synthesis, simplifying timing closure in multi-clock-domain designs. The FastTrack interconnect offers predictable routing delays across the die, which shortens synthesis iterations in Quartus II and legacy MAX+PLUS II tool flows. Typical applications include telecom line-card glue logic, industrial control and protocol bridging, ASIC prototyping, image processing front-ends, and embedded DSP co-processing. The wide I/O count (93 pins) makes it suitable for parallel bus interfaces and high-pin-count ASIC replacement designs. When designing with this device, ensure Quartus II (or MAX+PLUS II for legacy flows) is used for synthesis and fitting. Verify that the chosen speed grade meets timing closure for the target clock frequency, and budget adequate thermal headroom because the LQFP package has a relatively high junction-to-ambient thermal resistance compared with BGA alternatives. This page synthesizes distributor pricing, engineering-sample availability, drop-in alternatives within the APEX-20K family, and practical design notes not found in a solitary datasheet PDF, providing engineers with a consolidated decision-support view.

询价 联系我们
EP20K100CF144C8 - APEX-20K 100K Gate FPGA | Intel | 144-LQFP
EP20K100CF144C8

EP20K100CF144C8 - APEX-20K 100K Gate FPGA | Intel | 144-LQFP

The Intel EP20K100CF144C8 is a member of the APEX-20K family of Field Programmable Gate Arrays (FPGAs), delivering 100,000 system gates, 4,160 logic elements, and 53,248 bits of embedded memory in a 144-pin LQFP (Low-profile Quad Flat Pack) package. The device integrates 93 user I/O pins and is fabricated on a 0.18-micron CMOS process with MultiCore architecture combining look-up tables (LUTs), embedded array blocks (EABs) for memory, and high-speed interconnect. A Field Programmable Gate Array (FPGA) is a type of programmable logic device (PLD) that allows designers to configure digital logic circuits after manufacturing. The APEX-20K family belongs to the broader hierarchy of programmable logic devices (PLDs), which also includes complex PLDs (CPLDs). Within Intel's portfolio, FPGAs are categorized under Programmable Logic Devices (PLDs) > FPGAs. APEX-20K devices pioneered the MultiCore architecture that combines fine-grained logic and coarse-grained memory, making them well suited for system-on-chip (SoC) prototyping, DSP functions, and high-speed data-path designs. Key features include 100K typical gates, 4,160 logic elements, 53,248 RAM bits distributed across embedded array blocks, 260 maximum I/O pins (part-specific to this device is 93 user I/Os in the 144-LQFP package), and a speed grade of -8 (commercial, mid-range). The device supports in-system programmability (ISP) via IEEE 1149.1 JTAG and offers 3.3V and 5.0V PCI compliance. The 144-LQFP package is a plastic surface-mount variant with 1.0 mm pitch and body size 20x20 mm, suitable for prototyping and low-to-medium volume production. The architecture combines four types of logic resources: logic array blocks (LABs) for combinatorial and sequential logic, embedded system blocks (ESBs) for dual-port RAM, ROM, and CAM functions, fast-track interconnect for high-speed routing between rows and columns, and a network of embedded array blocks (EABs) for memory-intensive operations. This heterogeneous structure enables efficient implementation of both logic-heavy and memory-heavy designs on a single device, eliminating the need for external memory in many applications. Typical applications include telecommunications equipment, industrial automation controllers, ASIC prototyping, high-speed digital signal processing (DSP), PCI bus interfaces, and embedded control systems. The 144-LQFP package and 93 user I/Os make it well suited for designs that need to bring out numerous signals for boundary-scan testing, external memory interfaces, or multi-channel I/O. When designing with this device, ensure your board layout provides adequate decoupling (100 nF high-frequency ceramic and bulk tantalum or aluminum electrolytic capacitors) near each supply pin. Use the JTAG interface for ISP programming to support field upgrades. Plan I/O assignments early because the 144-LQFP package limits the package-out versus ball-grid options of larger APEX-20K devices. This page synthesizes distributor pricing, drop-in same-package alternatives from the APEX-20K family and successor Cyclone devices, and practical design notes not found in the manufacturer datasheet. Pricing is presented as of 2026-09-07 and reflects real-time distributor data.

询价 联系我们
EP20K100CF144C8ES - APEX-20K 100k Gate FPGA 144-LQFP | Intel
EP20K100CF144C8ES

EP20K100CF144C8ES - APEX-20K 100k Gate FPGA 144-LQFP | Intel

The Intel (formerly Altera) EP20K100CF144C8ES is a 100,000-gate APEX-20K series Field Programmable Gate Array (FPGA) with 53,248 logic elements and 4,160 embedded RAM bits, housed in a 144-pin LQFP package. It provides 93 user I/O pins, operates from a 1.8V core supply with 3.3V/2.5V/1.8V multi-voltage I/O support, and is rated for the commercial 0C to +85C temperature range with an 8 ns pin-to-pin logic delay grade. What is an FPGA? An FPGA (Field Programmable Gate Array) is a semiconductor integrated circuit composed of configurable logic blocks (CLBs), programmable interconnects, and I/O cells that can be reconfigured by the designer after manufacture. FPGAs sit hierarchically under programmable logic devices (PLDs), which fall under digital integrated circuits, which are a subset of semiconductors. APEX-20K FPGAs specifically combine Look-Up Table (LUT)-based logic with embedded array blocks (EABs) that implement dual-port RAM, ROM, and multiplier functions, enabling a single chip to replace many discrete logic ICs. Key features of the EP20K100CF144C8ES include MultiVolt I/O supporting 1.8V, 2.5V, and 3.3V interfaces without external level shifters, four Phase-Locked Loops (PLLs) for clock multiplication and skew management, and 4160 RAM bits distributed across embedded array blocks. The 144-LQFP package offers 93 user I/O pins at 0.5 mm pitch, which is the highest I/O count available for the EP20K100 device density. The architecture combines a Logic Array Block (LAB) fabric of 4160 LUTs with Embedded Array Blocks (EABs) that can each implement 2 Kbits of dual-port RAM or ROM. The four on-chip PLLs generate up to four independent clock domains from a single reference, supporting frequency synthesis up to the device maximum. Boundary-scan (IEEE 1149.1 JTAG) is integrated for board-level test access, and the device is configured via passive serial, passive parallel, or in-system programmability through the IEEE 1532 standard. Typical applications include telecommunications line-card glue logic, industrial control system interfaces, ASIC prototyping and validation, low-to-medium volume production replacement of gate arrays, and PCI/PCI-X bus interfaces. The MultiVolt I/O and abundant user I/Os make it well suited for bridging legacy 5V-tolerant busses to modern 3.3V or 1.8V processors. When designing with this device, ensure the Quartus II design tool (or Max+Plus II for legacy flows) supports the -8 speed grade. The 144-LQFP requires standard JEDEC surface-mount reflow profiles; thermal performance is typically adequate without a heatsink for designs using fewer than 60% of available logic elements at moderate toggle rates. This page synthesizes distributor pricing tiers, drop-in same-footprint alternatives, and practical design notes from the APEX-20K datasheet family - information not consolidated on any single manufacturer or distributor page.

询价 联系我们
EP20K100CF144C9 - APEX-20K FPGA 100K Gates 144-LQFP | Intel
EP20K100CF144C9

EP20K100CF144C9 - APEX-20K FPGA 100K Gates 144-LQFP | Intel

The Intel EP20K100CF144C9 is a member of the APEX-20K family of field-programmable gate arrays (FPGAs) that combines look-up table (LUT) logic, embedded system blocks (ESBs), and a high-bandwidth interconnect fabric in a single device. It integrates approximately 100,000 typical gates and 4,160 logic elements in a 144-pin LQFP (Low-profile Quad Flat Pack) package, with 93 user I/O pins for interfacing to external memory, buses, and peripherals. An FPGA (Field-Programmable Gate Array) is a programmable logic device (PLD) category in the broader semiconductor taxonomy: FPGA -> programmable logic device -> logic IC -> integrated circuit. Unlike ASICs, FPGAs are configured post-fabrication via an SRAM-based or antifuse-based configuration bitstream, allowing rapid prototyping and in-system reconfigurability for telecom, industrial control, and DSP applications. Key features of the EP20K100CF144C9 include four embedded system blocks (ESBs) that can be configured as dual-port RAM, ROM, FIFO, or CAM; 4,160 logic elements (LEs) grouped in Logic Array Blocks (LABs); 53,248 bits of embedded RAM; and 93 user I/O pins compatible with LVTTL, LVCMOS, and other common I/O standards. The device supports in-system programmability (ISP) via the IEEE 1149.1 JTAG interface, allowing configuration bitstream updates in the field without removing the device from the PCB. The APEX-20K architecture features a MultiCore interconnect routing fabric that links LEs and ESBs across four hierarchical levels (L1-L4), enabling predictable timing closure and high utilization. The die operates from a 2.5 V core supply and supports multi-voltage I/O via separate VCCIO banks. Maximum internal clock frequencies depend on the design's LE utilization and routing but typically reach 100 MHz for combinatorial datapaths and 180 MHz for registered I/O at commercial temperature. Typical applications for the EP20K100CF144C9 include high-speed glue logic replacement, custom bus interfaces, protocol bridging (PCI to local bus, UART to parallel), industrial control signal conditioning, and prototyping of ASIC-equivalent functions before mask production. The commercial speed grade (-C9) targets moderate-frequency designs where lower-cost packages and the LQFP-144 footprint are preferred over BGA packages for hand-solderable prototyping and field service. When designing with this device, ensure proper configuration source selection via MSEL pins (EPCS serial configuration devices, JTAG, or CPU-driven passive serial), and provide a clean 2.5 V core rail with adequate decoupling (typically 0.1 µF + 10 µF bulk) near each VCC pin pair. The 144-LQFP package has a 1.0 mm pitch, requiring careful PCB layout to maintain signal integrity at the edge rates typical of APEX-20K I/O. This page synthesizes distributor stock indicators, drop-in alternatives drawn from the same APEX-20K family and cross-brand pin-compatible equivalents, and practical design notes not found in the manufacturer datasheet. Lifecycle status, parametric values, and pricing references reflect distributor data as of 2026-09-07 and may shift as Intel continues long-term support for the legacy APEX-20K line.

询价 联系我们
EP20K100CF324C7 - 100K Gate FLEX 10K FPGA, 246 I/O, 324-FBGA | Intel
EP20K100CF324C7

EP20K100CF324C7 - 100K Gate FLEX 10K FPGA, 246 I/O, 324-FBGA | Intel

The Intel EP20K100CF324C7 is a high-density FLEX 10K family FPGA delivering 100,000 system gates, 4,160 logic elements (LEs), and 246 user I/O pins in a 324-ball FineLine BGA (FBGA) package. Built on a 0.22 µm CMOS SRAM process with embedded array blocks (EABs) for on-chip RAM and ROM, the device combines fine-grained logic with coarse-grained memory to optimize cost-effective data-path and control-logic designs. It operates from a 1.8 V core / 3.3 V I/O supply (multi-voltage I/O interface) and is specified for the commercial 0 °C to +70 °C temperature range, indicated by the C7 speed grade ordering code. An FPGA (Field-Programmable Gate Array) is a semiconductor integrated circuit composed of configurable logic blocks (CLBs), programmable interconnect, and I/O cells that the user defines after manufacture via a configuration bitstream. FPGAs sit within the broader taxonomy of programmable logic devices (PLDs) and, together with CPLDs, form the principal alternative to ASICs and microcontrollers for medium-volume, high-flexibility digital designs. Within Intel/Altera's portfolio, the FLEX 10K family is positioned as the second-generation embedded-array family, bridging classic gate-array architectures and modern system-on-chip FPGAs. Key features of the EP20K100CF324C7 include 4,160 LUTs / LEs, 12 EABs providing up to 49,152 RAM bits, 246 maximum user I/O pins, multi-voltage I/O supporting 1.5 V, 1.8 V, 2.5 V, and 3.3 V standards, and JTAG-based in-system programmability via the IEEE 1149.1 boundary-scan interface. The device is configured through a serial PROM or in-system via MAX+PLUS II / Quartus tools. The C7 speed grade is the slowest commercial bin, favored for power-sensitive designs that can tolerate lower clock rates. Architecturally, each LE contains a 4-input LUT, a programmable register, carry-chain logic, and a cascade-chain, while each EAB provides 2,048 RAM bits configurable as 256×8, 512×4, 1024×2, or 2048×1 with registered output. FastTrack interconnect provides row/column routing with predictable delays, and the embedded multiplier-free DSP blocks make the FLEX 10K suitable for glue logic, peripheral bridging, and small DSP pipelines. Typical applications include telecom line-card glue logic, industrial control backplanes, PCI/PCI-X bridge interfaces, video-format conversion, and ASIC prototyping. The 246 I/O count supports wide parallel buses, while the 49-Kbit embedded RAM enables FIFOs and small lookup tables without external memory. When designing with this device, note that the FLEX 10K is an older generation requiring MAX+PLUS II (legacy) or Quartus II 13.0 for bitstream generation; modern Quartus Prime releases do not support this device family. Plan configuration memory (EPC2/EPC4/EPC8 serial PROM) and confirm that 3.3 V I/O banks match your peripheral voltage to avoid level-shifter overhead. This page synthesizes distributor pricing, drop-in same-brand alternatives (other FLEX 10K 100K-gate speed/package variants from the Site MPN list), and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们