EPM9560GI280-20
EPM9560GI280-20 - 560 Macrocell EE PLD, 280-Pin PGA | Intel/Altera
The Intel/Altera EPM9560GI280-20 is a high-density CMOS EEPROM-based Programmable Logic Device (PLD) from the MAX 9000 device family, delivering 560 macrocells, 216 I/O lines, and 772 flip-flops in a 280-pin Pin Grid Array (PGA) package. The "-20" speed grade denotes a 20 ns pin-to-pin delay, and the "GI" package code identifies the ceramic PGA industrial-temperature variant.
A Programmable Logic Device (PLD) is a general-purpose digital integrated circuit whose internal logic and interconnect are defined by the user after manufacturing, allowing one silicon device to implement a wide range of glue logic, state machines, bus interfaces, and datapath controllers. The MAX 9000 family is built on a third-generation Multiple Array MatriX (MAX) architecture that combines fine-grained Logic Array Blocks (LABs) with an EEPROM programming technology, providing non-volatile configuration that retains state across power cycles without an external boot PROM.
Key features of the EPM9560GI280-20 include 12,000 usable gates, 560 macrocells, 216 user I/O pins, 772 flip-flops, an in-system programmability (ISP) interface compliant with IEEE Std. 1149.1 (JTAG), and a 5.0 V VCC core supply. The device is supported by the Altera MAX+PLUS II development system, which offers schematic, VHDL, Verilog HDL, and AHDL design entry together with synthesis, simulation, timing analysis, and device programming.
The MAX 9000 architecture arranges 560 macrocells into 28 LABs of 16 macrocells each, with a continuous FastTrack interconnect running across the chip. Each macrocell contains a programmable-AND/fixed-OR array, an XOR gate for polarity control, a programmable register with clock, clock-enable, clear, and preset controls, and an I/O architecture that supports input, output, output-enable, and bidirectional operation. The result is a flexible platform suitable for high-density glue logic, register-intensive datapaths, and bus-interface bridging.
Typical applications include telecom and datacom line-card glue logic, industrial control and factory automation controllers, military and aerospace avionics, legacy bus-interface bridging, and high-density state-machine replacement of discrete 74LS/74F logic. The non-volatile EEPROM cell array makes it well suited to applications that must boot into a defined state without external configuration memory.
When designing with this device, ensure that the 5.0 V VCC supply rises monotonically and that I/O pin overshoot/undershoot is limited to the datasheet's transient envelope (overshoot to 7.0 V and undershoot to -2.0 V for periods under 20 ns under no-load conditions). Designers should also verify timing closure against the 20 ns speed grade using MAX+PLUS II timing analysis.
This page synthesizes distributor availability, parametric context, and drop-in alternative options for the EPM9560GI280-20 that are not consolidated in the original MAX 9000 datasheet.
询价
联系我们