EPM9320LI84-20N
EPM9320LI84-20N - MAX 9000 CPLD, 320 Macrocells, 84-PLCC | Altera
The Altera EPM9320LI84-20N is a high-density, in-system-programmable Complex Programmable Logic Device (CPLD) from the MAX 9000 family, fabricated on a 5.0-V CMOS EEPROM process and housed in an 84-pin Plastic Leaded Chip Carrier (PLCC, J-lead) package. It delivers 320 macrocells, 60 user I/O pins, pin-to-pin propagation delays as fast as 10 ns (speed grade -10 family) with a -20 speed grade variant targeting 20 ns, and internal counter frequencies up to 118 MHz. The MAX 9000 architecture integrates 6,000 to 12,000 usable gates in a third-generation Multiple Array MatriX (MAX) fabric and supports 5.0-V in-system programmability through an IEEE 1149.1 JTAG interface.
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL/GAL-like macrocell arrays with a programmable interconnect network. Within the broader programmable logic taxonomy, CPLDs sit between simple SPLDs (PALs, GALs, 22V10) and higher-density FPGAs, offering deterministic timing, instant-on operation from on-chip EEPROM, and high fan-in logic that makes them ideal for glue logic, bus decoding, and state-machine implementation. CPLDs are widely used as companion devices to microcontrollers, ASICs, and FPGAs.
Key differentiating specifications include 320 macrocells (the largest density in the MAX 9000 family), 60 bidirectional user I/O pins distributed across multiple I/O banks, 16 ns propagation delay in this speed grade, and a 118 MHz internal counter frequency. The non-volatile EEPROM configuration cell eliminates the need for external boot PROM and supports 100+ in-system reprogramming cycles per the MAX 9000 family specification.
The MAX 9000 architecture organizes logic into Logic Array Blocks (LABs) connected by a programmable interconnect, with each macrocell containing a programmable AND/OR array and a configurable flip-flop. The EEPROM-based configuration provides instant-on behavior at power-up, making the EPM9320LI84-20N well-suited to deterministic boot sequencing in systems that cannot tolerate FPGA-style configuration latency.
Typical applications include address decoding and bus-interface glue logic in microprocessor systems, peripheral controllers for ISA/PCI bus designs, state-machine and sequencer replacement for discrete 22V10 or TTL logic, JTAG boundary-scan integration on legacy boards, and industrial control systems requiring 5-V tolerant I/O. Designers choose MAX 9000 parts specifically when deterministic 10-20 ns timing and instant-on EEPROM behavior outweigh the higher gate counts of modern FPGAs.
When designing with this device, treat the PLCC-84 socket footprint as fixed (J-lead, 1.27 mm pitch, 30.35 x 30.35 mm body) and verify that the surrounding PCB layout preserves signal-integrity margins on the JTAG TCK/TMS/TDO/TDI lines. For new designs, consider the MAX II or MAX V families, which offer similar instant-on behavior with lower static power; for legacy board repair, the EPM9320LI84-20N remains a direct footprint-compatible replacement.
This page synthesizes distributor pricing from Octopart and DigiKey, drop-in alternative listings, and practical design notes that are not available on the bare manufacturer datasheet, giving engineers an engineer-focused reference for sourcing and replacement decisions on the MAX 9000 family.
询价
联系我们