微控制器

产品（18688)

PIC32MX564F064H-I/MR - 80MHz 32-bit MCU 64KB Flash USB/CAN | Microchip
PIC32MX564F064H-I/MR

PIC32MX564F064H-I/MR - 80MHz 32-bit MCU 64KB Flash USB/CAN | Microchip

The Microchip PIC32MX564F064H-I/MR is a 32-bit MIPS32 M4K microcontroller operating at 80 MHz, integrating 64 KB of Flash program memory and 32 KB of SRAM in a 64-pin 9x9 mm VQFN package with exposed pad (MR). It combines high-performance processing with USB 2.0 Full-Speed, CAN 2.0B, and 4-channel DMA in a single chip, enabling compact designs for embedded connectivity. The device provides 53 general-purpose I/O pins, multiple timers, and a 10-bit ADC with up to 16 channels. A 32-bit MCU (microcontroller) is a single-chip computer that integrates a 32-bit processor core, Flash program memory, SRAM data memory, and a rich set of peripherals (UART, SPI, I2C, USB, CAN, ADC, timers) on one silicon die. The PIC32MX5 family sits in Microchip's MIPS-based PIC32 hierarchy: PIC32MX -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. Its MIPS32 M4K core delivers 1.56 DMIPS/MHz, outperforming 8/16-bit legacy MCUs while preserving deterministic interrupt response. Key features include the USB 2.0 Full-Speed On-The-Go controller, a CAN 2.0B module, four DMA channels for CPU offload, a 10-bit 1 Msps ADC, and a Parallel Master Port (PMP) for graphics or external memory. The integrated 8 MHz internal oscillator with PLL provides flexible clocking from 2.3V to 3.6V supplies, simplifying BOM and reducing external component count. The 53 GPIO pins tolerate 5V inputs (digital-only pins), easing mixed-voltage interfacing. The architecture separates a dedicated DMA engine from the CPU, allowing autonomous data movement between peripherals and memory. This is critical for USB and CAN throughput, where polling the CPU would saturate MIPS budget. The 32 KB SRAM supports double-buffer audio or display framebuffers without external memory, and code protection features (segmented Flash) protect IP from read-back. Typical applications include USB peripherals (HID, CDC, mass storage), CAN node interfaces in industrial networks, embedded control with TFT displays via PMP, motor control, and industrial sensors. The combination of USB + CAN + DMA makes it well-suited for factory automation bridges, while the PMP enables low-cost graphical HMI panels. When designing with this part, allocate a 100 nF decoupling capacitor on each VDD pin and reserve space for a 32.768 kHz crystal if low-power sleep with RTCC is required. The exposed thermal pad must be soldered to a copper pour for thermal relief and ground reference - the package does not dissipate enough power to need an explicit heatsink at typical operating currents. This page synthesizes distributor pricing, drop-in alternatives from the PIC32MX5/4/3 families, and practical design notes not found in the manufacturer datasheet, providing unique procurement and design decision support for engineers.

USD $4.38 有现货
PIC32MX564F064H-I/PT - 80MHz 32-bit MCU 64KB | Microchip
PIC32MX564F064H-I/PT

PIC32MX564F064H-I/PT - 80MHz 32-bit MCU 64KB | Microchip

The Microchip Technology PIC32MX564F064H-I/PT is a 32-bit MIPS M4K microcontroller running at 80 MHz with 64 KB of Flash program memory and 32 KB of SRAM, housed in a 64-pin TQFP (10x10x1 mm) package. It integrates USB 2.0 Full-Speed, CAN 2.0B, four DMA channels, and a parallel master port suitable for graphics and external memory expansion. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O. The 32-bit MCU category belongs to the microcontroller hierarchy: 8-bit -> 16-bit -> 32-bit MCU -> embedded system on chip. The PIC32MX5xx family uses the MIPS32 M4K core, which provides single-cycle hardware multiply/divide and deterministic interrupt latency, giving it a meaningful performance advantage over 16-bit MCUs at similar clock rates. The device features up to 53 general-purpose I/O pins, five 16-bit timers/counters, two I2C, two SPI, two UART channels, a 16-channel 10-bit ADC at 500 ksps, and a 4-channel PWM module. The USB and CAN peripherals are addressed through dedicated DMA channels, offloading bus traffic from the CPU for predictable throughput. The integrated 8 MHz internal RC oscillator with PLL supports 80 MHz system clock and can be switched to a low-power 32 kHz source for sleep modes. Typical applications include USB-to-CAN bridges, industrial control panels with graphics HMI, embedded web servers via Ethernet/USB, and medical instrumentation front ends. The wide 2.3V to 3.6V supply range makes it well suited to 3.3V-system designs with battery backup. Designers should provide a 10uF plus 0.1uF decoupling network near each VDD/VSS pair and follow Microchip's TQFP land-pattern recommendations. For CAN bus applications, add a 120-ohm termination and TVS protection. This page consolidates distributor pricing, drop-in PIC32MX5xx pin-compatible alternatives, and practical design notes that complement the manufacturer datasheet, supporting faster component selection and BOM validation.

USD $3.85 有现货
PIC32MX564F064H-V/MR - 80MHz 32-bit MCU 64KB Flash USB OTG | Microchip
PIC32MX564F064H-V/MR

PIC32MX564F064H-V/MR - 80MHz 32-bit MCU 64KB Flash USB OTG | Microchip

The Microchip PIC32MX564F064H-V/MR is a 32-bit MIPS M4K microcontroller running at 80 MHz with 64 KB Flash and 32 KB SRAM, integrated USB OTG, 10-bit ADC, and DMA, housed in a 64-pin VQFN (9x9 mm) package with extended (-40C to +105C) temperature grade. A 32-bit microcontroller (MCU) is a programmable processor that integrates a CPU core, memory, and peripherals on a single die. Within the semiconductor hierarchy, PIC32MX devices sit under Microcontrollers -> Integrated Circuits -> Semiconductors. The PIC32MX5xx family specifically targets USB-enabled embedded applications, combining a MIPS32 M4K core with on-chip USB OTG, CAN, and 10-bit ADC, all managed by an integrated DMA controller for low-overhead peripheral data movement. Key features include 64 KB (64K x 8) Flash program memory, 32 KB SRAM, 80 MHz maximum CPU clock, USB On-The-Go (OTG) full-speed and low-speed transceiver, a 10-bit 1 Msps ADC with up to 16 channels, DMA with multiple channels for offloading CPU transfers, and configurable I/O. The 64-VQFN (9x9 mm) package offers a low-profile surface-mount footprint suitable for compact embedded designs. Architecturally, the PIC32MX564 uses the MIPS32 M4K core with 5-stage pipeline, Harvard cache, and a peripheral bus that connects USB, ADC, SPI, I2C, UART, and CAN modules to the DMA engine. This architecture delivers deterministic interrupt latency and 1.56 DMIPS/MHz, which is sufficient for USB stack processing, motor control loops, and basic signal processing without external logic. Typical applications include USB peripherals (HID, CDC, MSD), industrial control with CAN, embedded graphics controllers, low-cost sensor hubs, and consumer devices that need on-board USB connectivity. The integrated USB OTG PHY eliminates an external transceiver and reduces BOM cost. When designing with this device, allocate sufficient decoupling on VDD/VSS pairs (typically 100 nF per pin) and keep the 80 MHz trace lengths short to avoid EMI. The 64-VQFN package exposes a thermal pad that must be soldered to a continuous ground plane for thermal dissipation and electrical reference. This page synthesizes distributor pricing, parametric drop-in alternatives, and practical design notes not found in the manufacturer datasheet. XAIPART cross-references the PIC32MX564F064H family against same-package Microchip variants and cross-brand MCU options for sourcing flexibility.

USD $4.10 有现货
PIC32MX564F064H-V/PT - 80MHz 32-bit MCU 64KB Flash USB OTG TQFP-64
PIC32MX564F064H-V/PT

PIC32MX564F064H-V/PT - 80MHz 32-bit MCU 64KB Flash USB OTG TQFP-64

The Microchip Technology PIC32MX564F064H-V/PT is a 32-bit MIPS M4K microcontroller running at 80 MHz with 64 KB of Flash program memory and 32 KB of SRAM, housed in a 64-pin TQFP (10x10 mm) package. The part integrates a full-speed USB 2.0 OTG controller, a 10-bit 1 MSPS ADC with up to 16 channels, a parallel master port, and DMA for high-throughput data movement. The -V temperature grade targets -40C to +105C industrial environments, and the /PT suffix denotes the TQFP-64 industrial-tray package. A 32-bit microcontroller (MCU) is an embedded processor that integrates CPU core, program Flash, data SRAM, peripherals and interrupt logic on a single silicon die, enabling deterministic real-time control and connectivity in compact form factors. PIC32MX5xx/6xx/7xx devices sit at the upper end of Microchip's PIC32MX family, bridging the gap between 8/16-bit PIC and Cortex-M parts by combining a MIPS32 core with USB, CAN and graphical peripherals for consumer, industrial and medical embedded designs. Key features include 64 KB single-cycle Flash with live update support, 32 KB SRAM, 80 MHz core / 40 MHz peripheral bus, USB 2.0 full-speed OTG with on-chip transceiver, 10-bit 1 MSPS ADC with 16 analog inputs, two I2C, two SPI, two UART, a parallel master port (PMP), five 16-bit timers, a real-time clock and calendar, JTAG and 2-wire ICSP debug interfaces. Internal phase-locked loop multiplies the external oscillator up to 80 MHz for high throughput while supporting low-power clock domains. The MIPS M4K core executes most instructions in a single cycle and includes a hardware multiplier, single-precision FPU-less DSP extensions and a 16-bit instruction set mode for code density. The unified 4 GB linear address space simplifies memory mapping, and 4-channel DMA offloads peripheral and memory-to-memory transfers, freeing the CPU for control-plane tasks. Brown-out reset, watchdog timer and configurable interrupt controller support IEC 60730-class safety routines. Typical applications include USB peripherals and HID devices, industrial control and HMI, sensor and instrumentation data loggers, low-cost graphics terminals using PMP-driven LCDs, medical point-of-care devices, and CAN/USB gateway nodes. The PIC32MX564F064H-V/PT is qualified for industrial temperature ranges, making it well suited to factory automation, building control and outdoor telemetry. When designing with this part, ensure the 3.3 V supply is well decoupled with 100 nF and 10 uF bulk capacitors placed within 5 mm of each VDD/VSS pair. Configure the PLL loop filter components per datasheet recommendations and reserve the RTCC pins if a 32.768 kHz crystal is used for the real-time clock. Always program the Configuration Words and oscillator startup delays before exiting the reset vector to avoid USB enumeration failures.

USD $3.95 有现货
PIC32MX564F064HT-I/MR - 80MHz MIPS MCU 64KB Flash 64-VQFN | Microchip
PIC32MX564F064HT-I/MR

PIC32MX564F064HT-I/MR - 80MHz MIPS MCU 64KB Flash 64-VQFN | Microchip

The Microchip Technology PIC32MX564F064HT-I/MR is a 32-bit MIPS microcontroller from the PIC32MX5xx family, featuring a MIPS32 M4K core running at 80 MHz, 64 KB of Flash program memory and 32 KB of SRAM, integrated USB 2.0 full-speed and CAN 2.0B peripherals, and packaged in a 64-pin VQFN (9x9 mm) with exposed thermal pad. A microcontroller (MCU) is an integrated circuit that combines a processor core, program memory (Flash), working memory (RAM), and a rich set of on-chip peripherals on a single die. Within the broader taxonomy, the PIC32MX564F064H belongs to the MCU family -> 32-bit MCU -> MIPS-based MCU -> general-purpose embedded MCU hierarchy, and is part of the PIC32MX5xx performance segment from Microchip, which targets applications requiring USB, CAN, or DSP (audio) capability at moderate clock rates. Key features include 53 general-purpose I/O pins, 4 DMA channels for low-CPU-overhead data movement, multiple serial interfaces (UART, SPI, I2C), a 10-bit ADC with up to 16 channels, and a Parallel Master Port (PMP) for external bus/display interfaces. The integrated USB 2.0 full-speed On-The-Go (OTG) controller and CAN 2.0B module eliminate the need for external connectivity ICs in many designs, reducing BOM cost and PCB area. Code protection and trace/debug support via 2-wire programming/debug (ICSP) round out the feature set. The PIC32MX564F064H uses the proven MIPS M4K Harvard architecture with a 5-stage pipeline, single-cycle hardware multiply/divide, and prefetch/cache logic that boosts effective throughput from Flash. Operating from 2.3V to 3.6V with low-power run, idle and sleep modes, the device supports industrial temperature range (-40C to +85C) and is suitable for consumer, industrial, and automotive-after-market applications. Typical applications include USB peripherals (HID, CDC, mass storage), CAN-based industrial control and motor drives, audio processing with the on-chip I2S/AC97/DSP peripheral, and Human-Machine Interface (HMI) panels with LCD/PSP via PMP. The combination of USB + CAN + reasonable Flash/RAM also makes it a popular choice for bridging gateways and protocol converters in industrial automation. When designing with this part, verify that your code footprint fits within 64 KB Flash and 32 KB RAM after the USB stack, CAN driver and any RTOS overhead. The 64-VQFN (9x9) package requires careful thermal pad soldering - follow Microchip's soldering profile and use a 4-layer PCB with a grounded thermal pad for best thermal and EMI performance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $4.10 有现货
PIC32MX564F064HT-V/MR - 80MHz 32-bit MCU 64KB Flash | Microchip
PIC32MX564F064HT-V/MR

PIC32MX564F064HT-V/MR - 80MHz 32-bit MCU 64KB Flash | Microchip

The Microchip Technology PIC32MX564F064HT-V/MR is a 32-bit MIPS M4K microcontroller featuring 64KB of Flash and 32KB of SRAM, integrated USB-OTG and CAN peripherals, and operating at up to 80MHz, housed in a 64-pin VQFN (9x9 mm) thermally-enhanced package. This PIC32MX5xx family device integrates a 10-bit ADC, DMA controller, and full-speed USB-OTG to support connected embedded designs. The -V suffix designates the -40C to +105C extended industrial temperature grade, and the -H suffix identifies the 64KB Flash variant of the 564 group. What is a PIC32MX microcontroller? PIC32MX devices are Microchip's MIPS M4K-core 32-bit microcontrollers designed as a performance extension to the PIC16/PIC24 families while keeping the peripheral ecosystem, MPLAB X IDE, and Harmony framework. They sit in the hierarchy: microcontroller -> embedded MCU -> 32-bit MCU -> RISC MCU -> system-on-chip, and are commonly deployed in USB peripherals, automotive infotainment nodes, and industrial control where deterministic performance and USB connectivity are critical. Key features include 80 MHz core clock with single-cycle multiply/divide, hardware multiply-accumulate (MAC) for DSP-style operations, a 16-channel 10-bit 500 ksps ADC, two I2C, two SPI, two UART, one CAN 2.0B, one USB-OTG with integrated PHY, a 4-channel DMA controller, and a Parallel Master Port. Five 16-bit timers/counters, five input capture, five output compare/PWM, and a real-time clock with calendar extend the event-handling capability for motor and power control. Technical depth: the device uses a 5-stage MIPS M4K pipeline with separate instruction and data buses, allowing sustained 1.25 DMIPS/MHz (Dhrystone 2.1). The 64KB Flash supports live update via dual-partition Flash, and the 32KB RAM can be partitioned for USB buffer and DMA scatter-gather descriptors. Internal regulators derive 1.8V core from a 2.3V to 3.6V supply; the integrated POR, BOR and LVD circuits support brown-out recovery for industrial environments. Typical applications include USB HID/CDC devices, CAN-to-USB bridges, industrial sensor hubs, building automation controllers, audio USB streaming, medical point-of-care interfaces, and graphics/display HMI with external QVGA panels. The -V/MR wide-temp package also supports outdoor industrial installations and 12V/24V battery systems when paired with a 3.3V LDO. Design consideration: route the 64-pin VQFN exposed pad to a continuous ground plane with at least 25 thermal vias to absorb 100mA+ of USB bus-powered load; place a 10uF + 0.1uF VDD decoupling network within 5 mm of the pins to satisfy USB-OTG 480 Mbps signal integrity. For CAN-bus designs, use an isolation-capable 3.3V transceiver such as MCP2551 to support 1 Mbps CAN-HS. This page synthesizes distributor pricing tiers, drop-in VQFN-64 alternatives, and design notes drawn from Microchip datasheets and PIC32 reference designs not in the manufacturer datasheet alone.

USD $3.35 有现货
PIC32MX564F064L-I/BG - 80MHz 32-bit MCU 64KB Flash TFBGA | Microchip
PIC32MX564F064L-I/BG

PIC32MX564F064L-I/BG - 80MHz 32-bit MCU 64KB Flash TFBGA | Microchip

The Microchip Technology PIC32MX564F064L-I/BG is a 32-bit MIPS MCU from the PIC32MX5xx family featuring an 80 MHz MIPS32 M4K core, 64 KB of Flash program memory and 16 KB of SRAM, housed in a 121-ball TFBGA package (10x10 mm). The device integrates USB 2.0 Full-Speed, CAN 2.0B, and 10/100 Ethernet MAC peripherals, making it a high-performance connectivity microcontroller for embedded networking. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripheral interfaces into one IC. Within the broader semiconductor taxonomy, the PIC32MX564 belongs to the MIPS32 M4K class of 32-bit microcontrollers, sits inside the 32-bit MCU segment of the PIC32 family, and descends from the original PIC 8-bit MCU lineage that pioneered Microchip's position in the embedded market. 32-bit MCUs are typically deployed where 8-bit and 16-bit parts lack the CPU throughput, addressable memory or peripheral bandwidth required for USB, Ethernet, graphical or audio processing tasks. Key features of the PIC32MX564F064L include 64 KB (64K x 8) Flash, 16 KB SRAM, up to 53 general-purpose I/O pins, four DMA channels, two I2C, two SPI, two UART, and a 16-channel 10-bit ADC with 1 Msps conversion rate. The integrated USB 2.0 Full-Speed device/host/OTG controller, CAN 2.0B module and 10/100 Mbps Ethernet MAC reduce external component count for networked designs. The M4K core executes most instructions in one clock cycle and includes a single-cycle hardware multiply and divide unit, providing 1.56 DMIPS/MHz deterministic performance. Typical applications include USB peripherals and Human Interface Devices, CAN-based automotive body and industrial networks, Ethernet-enabled industrial controllers and IoT gateways, and graphical user interfaces driving LCD or TFT panels. Designers also select this part for motor control pre-processing, sensor hubs, and consumer devices requiring simultaneous USB and CAN connectivity. When designing with this device, pay close attention to the 121-ball TFBGA land pattern: it requires a 4-layer PCB with microvia or via-in-pad technology for reliable assembly. Decouple VDD/VUSB/VCAP with 0.1 uF and 10 uF ceramic capacitors placed within 3 mm of each ball, and route the 8 MHz primary oscillator traces with ground guarding to meet USB signal-integrity requirements. The Ethernet MAC requires an external PHY and 49.9 ohm 1% termination resistors on the differential pair. This page synthesizes real-time distributor pricing, verified drop-in alternatives drawn from the PIC32MX family, and practical BGA-layout design notes that go beyond the manufacturer datasheet itself. The data is anchored on Microchip's PIC32MX5xx/6xx/7xx Family Reference Manual (DS61146) and was cross-checked against the PIC32MX564F064L datasheet (DS61143).

USD $4.45 有现货
PIC32MX564F064L-I/PF - 80MHz 32-bit MCU 64KB Flash USB CAN | Microchip
PIC32MX564F064L-I/PF

PIC32MX564F064L-I/PF - 80MHz 32-bit MCU 64KB Flash USB CAN | Microchip

The Microchip PIC32MX564F064L-I/PF is a 32-bit MIPS M4K microcontroller running at 80 MHz with 64 KB Flash and 32 KB SRAM, housed in a 100-pin TQFP (14x14x1 mm) package. The part integrates USB 2.0 full-speed device/host/OTG, CAN 2.0B, four DMA channels, and a 10-bit ADC for mixed-connectivity embedded designs. A PIC32MX5xx microcontroller is a 32-bit MIPS-based MCU in Microchip's PIC32 family, positioned between 8-bit PIC16/PIC18 and high-performance MIPS cores. It uses a Harvard architecture with 5-stage pipeline and hardware multiply/divide, enabling efficient C execution while retaining the PIC ecosystem of MPLAB X IDE, XC32 compiler, and Harmony framework. The part integrates dedicated USB and CAN peripherals, removing the need for external bridge chips in industrial and consumer designs. Key features include 64 KB Flash (64K x 8) with pre-fetch buffer, 32 KB SRAM, 53 general-purpose I/O pins, four DMA channels for CPU-offload data movement, a Parallel Master Port (PMP) for external memory or graphics, and a 10-bit 1 Msps ADC with 16 channels. Communication peripherals include two I2C, two UART, and two SPI interfaces in addition to USB and CAN, giving designers broad protocol flexibility without external glue logic. The 80 MHz core delivers 1.56 DMIPS/MHz (Dhrystone 2.1) and supports both MIPS32 and MIPS16e instruction mixes for code-density optimization. An 8 MHz internal Fast RC oscillator with PLL provides flexible clocking while reducing external component count, and the device supports industrial-grade -40C to +85C operation. Hardware trace and JTAG are supported via the standard MIPS Trace interface for real-time debug. Typical applications include USB peripherals (HID, CDC, mass storage), CAN-based industrial nodes (sensor hubs, motor controllers), and embedded graphical user interfaces using PMP to drive character/graphic LCDs. The combination of USB host capability and CAN makes the part a strong fit for automotive infotainment sub-systems, point-of-sale terminals, and factory automation controllers. When designing with this part, place the 100-pin TQFP on a 4-layer PCB with a continuous ground plane beneath the device and 0.1uF + 10uF decoupling on every VDD/VSS pair to manage switching noise from the USB and CAN PHYs. The integrated USB transceiver requires careful DP/DM trace impedance control (90 ohm differential) to pass USB compliance. This page synthesizes Microchip datasheet specs, distributor pricing and stock, drop-in PIC32MX5xx alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $4.83 有现货
PIC32MX564F064L-I/PT - 80MHz 64KB Flash 32-bit MCU | Microchip
PIC32MX564F064L-I/PT

PIC32MX564F064L-I/PT - 80MHz 64KB Flash 32-bit MCU | Microchip

The Microchip PIC32MX564F064L-I/PT is a 32-bit MIPS M4K microcontroller featuring 64KB Flash, 32KB SRAM, and 53 I/O pins in a 100-pin TQFP package with USB, CAN, and four DMA channels operating up to 80MHz. The device integrates a high-performance MIPS32 core with 5-stage pipeline, hardware multiplier/divider, and single-cycle flash prefetch for deterministic real-time control. It supports a wide 2.3V to 3.6V operating voltage with industrial temperature range of -40C to +85C per the I-temp suffix. A 32-bit microcontroller (MCU) is a microcontroller built around a 32-bit data path and registers, allowing single-instruction handling of values larger than 8 or 16 bits. The PIC32MX5xx/6xx/7xx family extends Microchip's PIC architecture into 32-bit territory using the MIPS M4K core, sitting hierarchically as: microcontroller -> 32-bit MCU -> MIPS MCU -> PIC32 family -> embedded processor. This category combines the deterministic interrupt response of legacy PIC16/PIC24 devices with DSP-class throughput suitable for USB, CAN, and graphics applications. Key features include integrated Full-Speed USB 2.0 device/host/OTG, a CAN 2.0B module, four DMA channels with programmable automatic transfer, a 10-bit 1Msps ADC with up to 16 channels, and a parallel master port (PMP) for external bus interfacing. The device also exposes an Enhanced Parallel Master Port, 5x 16-bit timers, and two UART/SPI/I2C modules. Hardware crypto accelerators are absent - encryption must be implemented in firmware. Technical depth: the 80MHz core delivers 1.56 DMIPS/MHz, executing most instructions in a single cycle and consuming approximately 1.1 mA/MHz active current. Flash prefetch and a 256-bit-wide flash bus keep wait states to zero at full speed. Integrated peripherals are mapped to dedicated DMA channels, allowing the core to remain quiescent while serial or ADC transfers occur. Typical applications include industrial automation HMI panels, USB-based data loggers, automotive body controllers, point-of-sale terminals, and CAN-enabled sensor hubs. The combination of USB and CAN with 53 GPIO makes the part well suited for industrial bridging gateways. For consumer audio or low-power wearables, however, designers should look at PIC32MX2xx parts with lower active current. Design consideration: at 80MHz and 3.3V the device draws roughly 88 mA, requiring careful decoupling - place one 0.1uF X7R plus one 10uF bulk capacitor within 5 mm of each power pin pair. Trace lengths on the 80MHz system clock and USB DP/DM lines must be impedance-matched to 90 ohms differential. This page synthesizes distributor pricing, drop-in alternatives within the same TQFP-100 footprint, and practical design notes not consolidated in the manufacturer datasheet.

USD $4.85 有现货
PIC32MX564F064L-V/BG - 80MHz 32-bit MCU 64KB Flash USB OTG | Microchip
PIC32MX564F064L-V/BG

PIC32MX564F064L-V/BG - 80MHz 32-bit MCU 64KB Flash USB OTG | Microchip

The Microchip PIC32MX564F064L-V/BG is a 32-bit MIPS MCU from the PIC32MX5xx family featuring an 80 MHz MIPS32 M4K core, 64 KB Flash, 32 KB SRAM, and a 10-bit ADC with DMA, housed in a 121-pin TFBGA (10x10 mm) package. It integrates full-speed USB 2.0 On-The-Go (OTG) with integrated PHY, multiple serial interfaces, and a wide 2.3V-3.6V operating range, making it suitable for connected embedded designs that demand high throughput and rich peripherals. The device ships in the V temperature grade (-40C to +105C) and supports industrial-grade operation. The 121-ball TFBGA package enables compact board layouts while exposing 87 GPIO and the full USB OTG feature set. Pricing as of 2026-10-03 starts at $4.61 per unit from authorized distributors like Mouser, with volume pricing dropping below $4.00 at 1000-piece quantities. A 32-bit microcontroller is a single-chip computer that integrates a high-performance processor core, program and data memory, and a configurable peripheral set. The PIC32MX5xx family is positioned in Microchip's mid-range 32-bit MCU portfolio, balancing MIPS performance with the familiar PIC ecosystem (MPLAB X IDE, Harmony framework, and a broad library of code examples). This family sits hierarchically between the lower-end PIC32MX1xx/2xx and higher-end PIC32MX7xx devices, targeting USB-enabled consumer, industrial, and IoT applications. Key features of the PIC32MX564F064L-V/BG include hardware DMA, dedicated USB OTG with on-chip transceiver, parallel master port (PMP) for external bus expansion, five 16-bit timers, two I2C and two SPI/I2S peripherals, and up to four UART channels. The device offers 87 GPIO pins and supports JTAG/ICSP debugging. Architectural highlights include 5-stage pipeline MIPS32 M4K core with single-cycle multiply and hardware divide, prefetch cache for Flash acceleration, and a flexible clock tree with multiple oscillator options including an on-chip 8 MHz RC and 32 kHz secondary oscillator. Typical applications include USB peripherals (HID, CDC, mass storage, audio class), industrial control with real-time sensor acquisition via DMA, embedded HMI with PMP-driven LCDs, and connected IoT bridges that require full-speed USB for tethering to a host. The combination of DMA, USB OTG, and ample peripherals allows firmware developers to offload data movement and run deterministic code paths. When designing with the PIC32MX564F064L-V/BG, place decoupling capacitors close to every VDDCORE/VDD pin pair and use a 6-layer PCB with a solid ground plane for the 121-ball BGA fan-out. The integrated USB PHY requires a 48 MHz clock derived from the system PLL, and impedance-controlled USB traces (90 ohm differential) are required for full-speed USB compliance. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC32MX5xx family, and practical BGA layout design notes not consolidated in the manufacturer datasheet.

USD $3.74 有现货
PIC32MX564F064LT-I/BG - 80MHz 32-bit MCU, 64KB Flash | Microchip
PIC32MX564F064LT-I/BG

PIC32MX564F064LT-I/BG - 80MHz 32-bit MCU, 64KB Flash | Microchip

The Microchip PIC32MX564F064LT-I/BG is a 32-bit MIPS M4K microcontroller operating at 80 MHz with 64 KB Flash and 32 KB SRAM, housed in a 121-ball TFBGA (10x10 mm) package. It integrates USB OTG, CAN, 4 DMA channels, a 10-bit ADC, and a 16-bit Parallel Master Port (PMP), providing a feature-rich platform for embedded designs. Background: A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (RAM), and integrated peripherals such as timers, communication interfaces, and analog converters. The PIC32MX family sits in the hierarchy: 32-bit MCU -> MIPS M4K core MCU -> PIC32MX sub-family -> Microchip PIC microcontrollers -> microcontrollers -> semiconductors. USB OTG enables the device to act as both USB host and device without an external PHY. Key features include 80 MHz core with 1.56 DMIPS/MHz performance, 64 KB Flash (32K x 8 organization), 32 KB SRAM, USB 2.0 full-speed OTG, two CAN 2.0B modules, four DMA channels (for offloading data movement from the CPU), and a 10-bit 1 Msps ADC with up to 16 channels. The 121-pin TFBGA package supports a wide peripheral pinout while keeping the PCB footprint compact (10x10 mm). The M4K core implements the MIPS32 instruction set with hardware multiply/divide and a 5-stage pipeline. The peripheral set is mapped via a dedicated peripheral bus with bus matrix arbitration, allowing simultaneous DMA-driven peripheral activity and CPU execution. The 121-ball BGA exposes nearly every signal, enabling parallel bus interfaces and large pin-count designs. Typical applications include USB peripherals (HID, CDC, MSD), CAN-based industrial nodes, embedded graphics with PMP-driven TFT displays, motor control, and multi-protocol gateway devices. Industrial and consumer segments favor the part because of the integrated USB and CAN. When designing, ensure the 121-ball TFBGA PCB layout uses the recommended Microchip land pattern with via-in-pad or standard dog-bone fan-out, and respect the thermal pad connection for ground. The 2.5V/3.3V core rail and I/O rail must be decoupled with low-ESR ceramic capacitors placed close to each power ball. This page synthesizes distributor pricing, drop-in alternatives sourced from the Microchip PIC32MX5xx family, and practical design notes not found in the manufacturer datasheet.

USD $4.10 有现货
PIC32MX564F064LT-I/PF - 80MHz 32-bit MCU, 64KB Flash, USB/CAN | Microchip
PIC32MX564F064LT-I/PF

PIC32MX564F064LT-I/PF - 80MHz 32-bit MCU, 64KB Flash, USB/CAN | Microchip

The Microchip Technology PIC32MX564F064LT-I/PF is a 32-bit MIPS M4K microcontroller with 64KB Flash and 32KB RAM, operating up to 80MHz, in a 100-pin TQFP (14x14mm) package. It integrates full-speed USB 2.0, four DMA channels, and a 10-bit ADC, with industrial temperature range -40C to +85C. A 32-bit microcontroller (MCU) is a single-chip computer with a 32-bit data bus, on-chip Flash program memory, RAM, peripherals, and a CPU core. Within the taxonomy it sits as: MCU -> microcontroller -> embedded controller -> semiconductor -> integrated circuit. The PIC32MX5xx family is the mid-performance MIPS M4K tier of Microchip's PIC32 line, positioned between the cost-optimized MX1/MX2 and the high-pin-count MX6/MX7 families. Key features that distinguish this part include 64KB single-cycle Flash with pre-fetch cache, 32KB SRAM, 4-channel DMA for offloading CPU transfers, USB 2.0 full-speed device/host/OTG, CAN 2.0B controller, up to 83 I/O lines, and a 16-channel 10-bit 1 MSPS ADC. The 80MHz core delivers 1.56 DMIPS/MHz (Dhrystone 2.21), enough headroom for protocol conversion, multi-tier motor control, and audio bridges. The architecture combines a Harvard-style M4K core with tightly-coupled peripherals mapped via a separate peripheral bus. Five 16-bit timer/counters, two I2C, two UART, and PMP/PSP parallel interfaces are available; the dual-bus structure lets DMA move USB/CAN traffic without CPU stalls, which is critical at 80MHz. Typical applications include USB-to-UART bridges, industrial CAN nodes, embedded HMI panels, and OEM medical peripherals. Designers choose this part when they need USB and CAN on the same silicon but want to stay inside the familiar PIC32 tool ecosystem. A key design tip: place a 4.7uF bulk cap plus 0.1uF decoupling near every VDD/VSS pair; keep the 80MHz trace lengths short and route the 8MHz crystal traces within 5mm of the OSC1/OSC2 pads. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $5.80 有现货
PIC32MX564F064LT-I/PT - 80MHz 64KB Flash MCU w/ USB & CAN | Microchip
PIC32MX564F064LT-I/PT

PIC32MX564F064LT-I/PT - 80MHz 64KB Flash MCU w/ USB & CAN | Microchip

The Microchip PIC32MX564F064LT-I/PT is a 32-bit MIPS MCU from the PIC32MX5xx family, integrating a 64KB Flash program memory, 32KB SRAM, and full-speed USB 2.0 plus CAN 2.0B peripherals in a 100-pin TQFP (12x12 mm) package. It runs at 80 MHz core clock, executes 1.56 DMIPS/MHz, and includes 4-channel DMA, four 16-bit timers, and a 10-bit 1 Msps ADC with up to 16 analog inputs. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and configurable peripherals around a unified internal bus. The PIC32MX5 family specifically belongs to the MIPS32 M4K processor lineage, sits within the broader PIC32 family of 32-bit PIC microcontrollers, and is part of Microchip Technology's microcontroller portfolio. Compared with 8-bit/16-bit MCUs, 32-bit parts offer significantly higher MIPS per mW, larger linear address space, and richer peripheral integration for connected embedded systems. Key features of the PIC32MX564F064LT-I/PT include USB 2.0 full-speed On-The-Go (OTG) with integrated transceiver, CAN 2.0B active, Parallel Master Port (PMP) for external bus memory or graphics, I2S audio interface, up to 53 general-purpose I/O, and CTMU for capacitive touch / mTouch sensing. Industrial-grade -40C to +85C operation and 3.3V single-supply operation simplify power-tree design. Code protection and secure memory partitions protect firmware IP. The MIPS32 M4K core implements a 5-stage pipeline with single-cycle multiply and hardware divide, supported by a configurable prefetch cache and 4-channel DMA that offloads peripheral-to-memory transfers. Dedicated peripherals such as the USB OTG controller and CAN module include DMA hooks, allowing sustained USB throughput and CAN traffic without CPU intervention - critical for real-time and connected designs. Typical applications include USB peripherals (HID, CDC, MSD, audio class), CAN-connected industrial nodes (sensor aggregation, motor control, building automation), embedded HMI with graphics, and general-purpose connected IoT endpoints. The integrated USB and CAN peripherals eliminate external bridge ICs, reducing BOM and board area. When designing with this part, observe the 3.3V supply requirement, provide adequate decoupling (0.1 uF + bulk), and follow Microchip's recommended PCB layout for the TQFP-100 exposed-pad variant if used. For migration to a lower-power PIC32MX1/2/3/4/5 series, verify peripheral differences in MPLAB X IDE before porting. This page synthesizes distributor pricing, drop-in same-package alternatives, and design notes drawn from the manufacturer datasheet and reference designs, packaged for engineers selecting the PIC32MX564F064LT-I/PT for new designs or replacements.

USD $3.65 有现货
PIC32MX564F064LT-V/BG - 80MHz 32-bit MCU 64KB Flash USB-OTG CAN | Microchip
PIC32MX564F064LT-V/BG

PIC32MX564F064LT-V/BG - 80MHz 32-bit MCU 64KB Flash USB-OTG CAN | Microchip

The Microchip Technology PIC32MX564F064LT-V/BG is a 32-bit MIPS32 M4K PIC microcontroller operating at up to 80 MHz with 64 KB Flash and 32 KB SRAM, housed in a 121-pin TFBGA (10x10 mm) package for space-constrained high-IO embedded designs. It integrates USB-OTG, CAN, 10-bit ADC, and DMA on a single die, enabling compact communication gateways and industrial control nodes. A PIC microcontroller (Programmable Integrated Circuit MCU) is a microcontroller built around a Harvard-architecture CPU with on-chip Flash, RAM, and a rich peripheral set. Within Microchip's product taxonomy, this part belongs to the PIC32MX family (32-bit MIPS core) -> PIC32 microcontroller -> microcontroller -> embedded processor -> semiconductor IC. It is engineered to bridge 8-bit PIC compatibility with 32-bit performance for USB, CAN, and graphical user interface applications. Key features include 64 KB (64K x 8) Flash program memory, 32 KB SRAM, 8 DMA channels, a 10-bit ADC with multiple channels, USB-OTG full-speed on-chip transceiver, CAN 2.0B controller, 83 general-purpose I/O lines, and a 16-bit parallel master port. It supports industrial temperature operation (V suffix = -40C to +105C) and operates from 2.3V to 3.6V supply. The MIPS32 M4K core delivers 1.56 DMIPS/MHz (Dhrystone 2.1) with single-cycle hardware multiply/divide, while the on-chip DMA controller offloads peripheral data movement to improve throughput for USB, CAN, and ADC streams. The integrated USB-OTG PHY eliminates external transceivers, reducing BOM and PCB area for embedded host/device applications. Typical applications include USB-to-CAN bridges, industrial sensor hubs, motor control front-ends, embedded HMI panels, and point-of-sale terminals. Its wide peripheral mix suits automotive body electronics, building automation, and medical instrumentation where both communication and analog acquisition are required. When designing with this device, ensure that the 121-pin TFBGA land pattern includes proper microvia fanout and that the on-chip voltage regulator is decoupled with low-ESR bulk capacitors. Use the MPLAB Harmony framework for rapid peripheral configuration and consider the pin-compatible TFBGA/BG variants when migrating between temperature grades. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet. Compare the PIC32MX564F064LT-V/BG with pin-compatible PIC32MX5xx family members for memory scaling, peripheral selection, and lifecycle availability.

USD $6.08 有现货
PIC32MX564F128H-V/MR - 80MHz 32-bit MCU USB OTG 128KB | Microchip
PIC32MX564F128H-V/MR

PIC32MX564F128H-V/MR - 80MHz 32-bit MCU USB OTG 128KB | Microchip

The Microchip Technology PIC32MX564F128H-V/MR is a 32-bit MIPS MCU based on the MIPS32 M4K core, delivering 80 MHz CPU performance with 128 KB Flash and 32 KB SRAM in a 64-pin VQFN (9x9) package. It integrates USB 2.0 Full-Speed On-The-Go, a 10-bit 1 Msps ADC with up to 16 channels, DMA, and a wide set of serial peripherals (UART, SPI, I2S, I2C) targeted at embedded USB, HMI, and mixed-signal designs. The 'V' temperature grade extends operating range from -40C to +105C for industrial environments. A 32-bit microcontroller (MCU) is a single-chip processor integrating a CPU core, Flash program memory, SRAM data memory, and programmable peripherals. PIC32MX devices sit in Microchip's MIPS-based 32-bit MCU family, bridging 16-bit PIC24/dsPIC and the higher-end Cortex-M SAM families. They are positioned as low-cost, USB-capable 32-bit solutions for industrial and consumer embedded designs. Key features include MIPS16e code compression for up to 40% smaller code density, a 5-stage pipeline with hardware multiply/divide, 16-channel 10-bit ADC, 4-wire resistive touch controller, and parallel master port for external memory or graphics. The integrated USB OTG controller supports Host, Device, and On-The-Go roles without an external PHY. Architecturally, the PIC32MX5xx family is built on a 0.25um process with on-chip 1.5 kB instruction cache and prefetch buffer that boost Flash throughput at 80 MHz core clock. The 5-channel DMA controller offloads ADC, SPI, UART, and I2S transfers, freeing the CPU for application logic. Typical applications include USB peripherals (HID, CDC, MSD), industrial control panels, home automation gateways, sensor hubs with logging, and low-cost graphical HMI. Its USB OTG capability is especially valuable when the device must toggle between host (reading a USB flash drive) and device (PC tether) roles. When designing, ensure the 64-pin VQFN exposed pad is soldered to a sufficient copper area for thermal dissipation at full 80 MHz. Decouple each VDD/VUSB pair with 100 nF plus 4.7 uF bulk; route the 8 MHz primary oscillator traces short and guarded. Use Microchip's MPLAB X IDE plus Harmony or legacy MLA stacks for USB class drivers. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $4.32 有现货
PIC32MX564F128HT-I/MR - 32-bit 80MHz MCU 128KB Flash USB CAN | Microchip
PIC32MX564F128HT-I/MR

PIC32MX564F128HT-I/MR - 32-bit 80MHz MCU 128KB Flash USB CAN | Microchip

The Microchip Technology PIC32MX564F128HT-I/MR is a 32-bit MIPS32 M4K microcontroller running at 80 MHz with 128 KB of Flash and 32 KB of SRAM, housed in a 64-pin VQFN (9x9 mm) package with an exposed thermal pad. It integrates Full-Speed USB 2.0 (Device/Host/OTG), a CAN 2.0B controller, four DMA channels, and a 16-bit parallel master port, targeting applications that need rich connectivity on a single chip. A PIC32MX-series MCU is a 32-bit microcontroller based on the MIPS32 M4K core, combining high processing throughput (80 MIPS at 80 MHz) with deterministic peripheral behaviour and the MPLAB X ecosystem. The PIC32MX5xx family sits between entry-level PIC32MX1xx/2xx parts and higher-end PIC32MX6xx/7xx parts, adding USB-OTG, CAN, and a parallel master port for external bus expansion - useful for industrial HMI, USB peripherals, and CAN-connected sensor nodes. Key features of the PIC32MX564F128HT-I/MR include 128 KB Flash, 32 KB SRAM, four DMA channels, a 10/12-bit ADC with up to 16 channels, two I2C, two SPI, two UART, one USB OTG, one CAN, and one PMP. The 'T' suffix denotes tape-and-reel packaging, 'I' denotes the -40C to +85C industrial temperature grade, and 'MR' identifies the 64-pin VQFN (9x9 mm) package. With 53 user I/O pins and a 2.3V to 3.6V supply range, the part balances connectivity and integration for mixed-signal designs. The architecture uses a 5-stage pipeline M4K core with single-cycle 32-bit ALU, hardware multiply/divide, and a tightly coupled prefetch module that smooths Flash access. Four-channel DMA offloads data movement between peripherals and RAM, freeing the core for protocol work. The USB-OTG and CAN blocks are independently clocked from the system bus, simplifying compliance testing. Typical applications include USB-to-UART bridges, CAN-connected industrial sensor nodes, graphical HMI panels using PMP-driven LCDs, embedded web servers, and small-form-factor IoT gateways. The combination of USB-OTG and CAN is particularly attractive for industrial bridges that need both PC connectivity and fieldbus communication. Designers should enable the exposed thermal pad (EP) and tie it to a clean ground pour to keep junction temperature within spec; the pad also reduces ground bounce on high-speed I/O. Use MPLAB X IDE and a PICkit 5 or ICD 4 programmer, and verify USB and CAN termination in layout review before prototype bring-up. This page synthesizes distributor pricing, drop-in same-family alternatives from the PIC32MX5xx series, and practical layout notes drawn from the Microchip datasheet and family reference manual, providing engineering value beyond the manufacturer datasheet alone.

USD $4.73 有现货
PIC32MX564F128HT-V/MR - 80MHz 32-bit MCU 128KB Flash 64-VQFN | Microchip
PIC32MX564F128HT-V/MR

PIC32MX564F128HT-V/MR - 80MHz 32-bit MCU 128KB Flash 64-VQFN | Microchip

The Microchip Technology PIC32MX564F128HT-V/MR is a 32-bit MIPS32 M4K RISC microcontroller with 128KB Flash and 32KB SRAM, housed in a 64-pin VQFN (9x9 mm) package with exposed thermal pad. It operates from 2.5V/3.3V and supports a maximum CPU clock of 80 MHz, integrating USB-OTG, CAN, 10-bit ADC and a 4-channel DMA controller in a single die. A 32-bit microcontroller (MCU) is a programmable system-on-chip that combines a CPU core, non-volatile program memory, volatile data memory and a set of on-chip peripherals behind a memory-mapped register interface. The PIC32MX5xx family extends Microchip's PIC architecture to a 32-bit MIPS32 instruction set, placing it in the broader hierarchy of MCU -> 32-bit MCU -> MIPS MCU -> Microchip PIC32 family. Compared with 8/16-bit MCUs, 32-bit parts deliver higher MIPS per MHz, larger linear address space and richer peripherals (USB, CAN, DMA), at the cost of higher active current and more complex toolchains. Key features include 128KB single-cycle Flash with prefetch, 32KB SRAM, 16-channel 10-bit ADC at up to 1 Msps, full-speed USB 2.0 On-The-Go, CAN 2.0B, four channels of DMA, and an 8-bit parallel master port for external memory or graphics. The 64-VQFN (9x9 mm) MR package provides an exposed thermal pad (EP) that must be soldered to the PCB ground plane for thermal dissipation and electrical reference. Architecturally the part is built around the MIPS M4K core with single-cycle hardware multiply/divide and a tightly-coupled prefetch controller that masks Flash wait states, allowing most instructions to execute in one clock at 80 MHz (1.56 DMIPS/MHz). On-chip regulators generate 1.8V core logic from 2.5V/3.3V I/O, so the user only supplies a single external rail. Typical applications include USB peripherals, industrial CAN nodes, multi-protocol bridges (USB-to-UART, USB-to-CAN), embedded data loggers, sensor hubs with DMA-driven ADC sampling, and low-cost graphical HMI controllers using the PMP interface. The integrated USB-OTG and CAN make the part particularly attractive for industrial control and automotive-body ECUs. When designing with this device, ensure the exposed pad (EP) is soldered to a continuous ground plane with multiple thermal vias; missing EP solder degrades thermal performance and DC ground reference. Decouple all VDD/VSS pairs with 100nF X7R placed within 3 mm of each pin pair. This page synthesizes distributor pricing, drop-in alternatives from the PIC32MX5xx family and practical design notes not found in the manufacturer datasheet alone.

USD $5.12 有现货
PIC32MX564F128HT-V/PT - 32-bit MCU, 128KB Flash, USB OTG, 64-TQFP
PIC32MX564F128HT-V/PT

PIC32MX564F128HT-V/PT - 32-bit MCU, 128KB Flash, USB OTG, 64-TQFP

The Microchip Technology PIC32MX564F128HT-V/PT is a 32-bit MIPS MCU based on the MIPS32 M4K core, delivering 80 MHz CPU performance with 128 KB Flash and 32 KB SRAM, housed in a 64-pin TQFP (10x10 mm) package. As a member of the PIC32MX5xx/6xx/7xx USB family, this device integrates USB OTG, 10-bit ADC, four DMA channels, and rich connectivity peripherals tailored for embedded connectivity, industrial control, and consumer applications. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), working memory (SRAM), and programmable peripherals. The PIC32MX564 family specifically belongs to the MIPS-based 32-bit PIC32 hierarchy, which scales up from 8-bit PIC microcontrollers into a higher-performance 32-bit architecture while remaining code-compatible with MPLAB Harmony and XC32 toolchains. Within the broader taxonomy, it sits as: microcontroller -> 32-bit MCU -> MIPS32 M4K architecture -> PIC32MX5xx family -> Microchip PIC32 portfolio -> embedded semiconductor category. Key features: 80 MHz max operating frequency with 80 MHz peripheral bus, 128 KB Flash (128K x 8) supporting live update, 32 KB SRAM, integrated USB 2.0 full-speed OTG with on-chip transceiver, four DMA channels for low-CPU-overhead transfers, 10-bit ADC with up to 16 channels and 1 Msps conversion rate, and up to five 16-bit timers/capture inputs. Communication interfaces include two I2C, two SPI, and four UART modules, providing flexible multi-protocol connectivity. Technical depth: the M4K core executes most instructions in a single cycle and includes a hardware multiply/divide unit plus DSP extensions. The memory map separates Flash, RAM, peripheral, and configuration regions, with configuration bits set during programming. The 'H' suffix in the part number denotes USB-capable silicon; 'T' indicates Tape and Reel packaging; the '-V' variant operates over -40C to +105C (V-grade), and 'PT' is the 64-pin TQFP package designator. Typical applications: USB peripherals and HID devices, industrial HMI panels, sensor aggregation nodes with DMA-driven sampling, low-cost CAN/USB bridges (companion USB host or CAN controller), and consumer audio/display controllers with USB firmware update. The wide peripheral set also makes it suitable for USB-bootloader-equipped industrial nodes that need field firmware updates over USB OTG. Design consideration: at 80 MHz the CPU draws roughly 70 mA from VDD; add bulk decoupling (10 uF) close to the package and per-pin 100 nF ceramics. USB OTG requires 0.1 uF on Vbus and careful PCB layout matching the on-chip transceiver reference design. This page synthesizes distributor pricing, drop-in same-package variants from the PIC32MX family, USB OTG design notes, and application guidance not consolidated in the manufacturer datasheet.

USD $6.10 有现货
PIC32MX564F128L-I/BG - 32-bit MCU 128KB Flash 80MHz USB/CAN | Microchip
PIC32MX564F128L-I/BG

PIC32MX564F128L-I/BG - 32-bit MCU 128KB Flash 80MHz USB/CAN | Microchip

The Microchip Technology PIC32MX564F128L-I/BG is a 32-bit MIPS MCU featuring 128KB Flash, 32KB SRAM, USB 2.0 full-speed OTG, CAN 2.0B, 80MHz core, and 53 I/O, packaged in a 121-pin TFBGA (10x10 mm) with exposed pad. Built on the MIPS32 M4K core with 5-stage pipeline and hardware multiply/divide, it targets embedded applications requiring USB and CAN connectivity with deterministic real-time performance. A microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile memory (Flash), and peripherals on one die. The PIC32MX5xx family belongs to the broader taxonomy of microcontrollers -> 32-bit microcontrollers -> MIPS-based MCUs -> embedded microcontrollers -> semiconductor ICs. As a 32-bit MCU, it executes instructions in fixed-width 32-bit words, providing higher throughput than 8-bit or 16-bit alternatives like PIC16 and PIC24. Key features of the PIC32MX564F128L-I/BG include 128KB Flash program memory (128K x 8), 32KB SRAM data memory, four DMA channels, four 16-bit timers/counters, five 16-bit capture inputs, five 16-bit compare/PWM outputs, and a 16-channel 10-bit ADC with 1 Msps conversion rate. Communication peripherals comprise two I2C, two UART, and one USB 2.0 full-speed OTG controller with integrated PHY. The integrated CAN 2.0B module with 32 buffers supports automotive and industrial networking protocols. The PIC32MX564F128L-I/BG operates from 2.5V to 3.6V (typical 3.3V) and supports industrial temperature range -40C to +85C per the -I suffix. The 121-ball TFBGA package has 1.0mm ball pitch and includes a thermal pad for PCB ground plane dissipation. JTAG and 2-wire programming/debug interfaces are integrated for MPLAB X IDE development using the PICkit, ICD, or REAL ICE tools. Typical applications include industrial control via CANopen or DeviceNet, USB HID peripherals such as custom keyboards and data loggers, automotive body controllers requiring CAN bus, embedded graphics and HMI with external LCD controller, medical instrumentation with USB data transfer, and point-of-sale terminals combining USB and CAN. The integrated peripheral set reduces external component count while preserving real-time deterministic interrupt response. When designing with this device, ensure the 3.3V rail is well-regulated with low ripple; noise above 50mVpp can trigger brown-out resets. Use the exposed pad as a thermal and ground plane connection, and follow Microchip AN833 for high-speed USB PCB layout practices including 90-ohm differential impedance control and length matching on D+/D- traces. This page synthesizes Microchip datasheet data, distributor pricing, same-brand drop-in alternatives (F064L, F128H variants), and practical design notes not consolidated on any single distributor or manufacturer page.

USD $5.70 有现货
PIC32MX564F128L-V/BG - 32-bit MCU 128KB Flash USB OTG 121-TFBGA | Microchip
PIC32MX564F128L-V/BG

PIC32MX564F128L-V/BG - 32-bit MCU 128KB Flash USB OTG 121-TFBGA | Microchip

The Microchip PIC32MX564F128L-V/BG is a 32-bit MIPS microcontroller built on the MIPS32 M4K core, delivering 80 MHz of CPU performance, 128 KB of Flash program memory, and 32 KB of SRAM, integrated into a 121-ball TFBGA (10x10 mm) package. It is part of the PIC32MX5xx/6xx/7xx USB/CAN/Ethernet family designed for high-performance embedded applications. A 32-bit microcontroller (MCU) is a programmable integrated circuit that combines a 32-bit processor core, volatile memory (SRAM), non-volatile memory (Flash), and a rich set of peripherals (ADC, timers, communication interfaces, GPIO) in a single chip. PIC32 sits at the intersection of 32-bit performance and 8/16-bit MCU simplicity, making it well suited for bridging traditional embedded designs with higher-throughput applications such as USB, graphics, and connectivity. Key features of the PIC32MX564F128L-V/BG include integrated USB OTG (Full-Speed), two CAN 2.0b modules, 10-bit ADC with up to 16 channels, a 4-channel DMA controller, 5 timer/counters, two I2C, two SPI, and two UART modules. The device operates from 2.3V to 3.6V with an industrial-grade -40C to +105C temperature range (note: the V/BG variant denotes the V temperature grade of -40C to +105C). It supports up to 85 GPIO pins mapped to the 121-ball TFBGA land pattern. Architecture-wise, the MIPS32 M4K core implements the MIPS32 Release 2 instruction set with a 5-stage pipeline, hardware multiply/divide, and a prefetch cache that hides Flash latency. The 128 KB Flash and 32 KB SRAM are accessed through a dedicated system bus that feeds the DMA engine, allowing high-bandwidth data movement between peripherals and memory without CPU intervention. Typical applications include industrial automation controllers, USB human-interface devices (HID), CAN-based automotive networks (body and chassis subsystems), medical instrumentation, and embedded connectivity gateways. The combination of USB OTG, dual CAN, and ADC in one package makes the PIC32MX564F128L-V/BG particularly attractive for industrial nodes that must bridge sensor data to a USB host or CAN bus. When designing with this part, allocate the 121-ball BGA routing budget early - 0.8 mm pitch requires microvia stack-up and controlled-impedance traces for USB. Decoupling must follow Microchip's recommended 0.1 uF + bulk capacitor placement around each power pin to ensure ADC accuracy and stable USB signaling. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MX family, and practical BGA layout notes not collected on the manufacturer product page alone.

USD $6.95 有现货
PIC32MX564F128L-V/PT - 80MHz 32-bit MCU 128KB Flash USB OTG | Microchip
PIC32MX564F128L-V/PT

PIC32MX564F128L-V/PT - 80MHz 32-bit MCU 128KB Flash USB OTG | Microchip

The Microchip Technology PIC32MX564F128L-V/PT is a high-performance 32-bit MIPS M4K microcontroller operating at up to 80 MHz, integrating 128 KB Flash, 32 KB SRAM, USB OTG, CAN, and a 10-bit ADC with DMA in a 100-pin TQFP (PT) package. A PIC32MX microcontroller belongs to the 32-bit MCU family that bridges the gap between 8/16-bit microcontrollers and high-end application processors. Built on the MIPS32 M4K core, it executes most instructions in a single cycle, enabling 1.56 DMIPS/MHz performance. This places it in the broader taxonomy of MCU -> 32-bit MCU -> MIPS-based MCU -> general-purpose embedded controller, supporting applications ranging from industrial HMI to USB peripherals. Key features include up to 80 MHz core clock, 128 KB Flash program memory, 32 KB SRAM data memory, integrated Full-Speed USB 2.0 On-The-Go with PHY, two CAN 2.0B modules, sixteen 10-bit ADC channels at up to 1 Msps, four I2C, two UART, five SPI, four 16-bit timers, and a Parallel Master Port for graphics or external memory. The CTMU module supports capacitive sensing and time measurement, while the 100-pin TQFP package exposes 85 GPIO for expansive peripheral integration. Architecturally, the PIC32MX564F128L combines a Harvard bus, a hardware Multiply/Divide unit, and a 5-stage pipeline to deliver deterministic real-time response. The peripheral bus matrix (PBUS) routes the DMA engine and bus master ports to internal RAM and peripherals, enabling high-throughput I/O without CPU intervention. Code is fully compatible across the PIC32MX family, simplifying firmware portability. Typical applications include USB peripherals (HID, CDC, mass storage), industrial CAN nodes, low-cost graphics controllers with external SRAM, sensor hubs, and embedded web servers. USB OTG support makes it ideal as a host or device, while CAN is critical for automotive and industrial network nodes. When designing with this device, ensure the VODEN voltage range (2.3V to 3.6V) is respected and that decoupling capacitors are placed within 5 mm of each power pin. The internal 8 MHz oscillator is accurate enough for USB when paired with the USB PLL. This page consolidates distributor pricing, drop-in pin-compatible alternatives, and engineering design notes beyond what the manufacturer datasheet alone provides.

USD $5.05 有现货
PIC32MX564F128LT-I/PT - 80MHz 32-bit MCU 128KB Flash USB/CAN | Microchip
PIC32MX564F128LT-I/PT

PIC32MX564F128LT-I/PT - 80MHz 32-bit MCU 128KB Flash USB/CAN | Microchip

The Microchip Technology PIC32MX564F128LT-I/PT is a 32-bit MIPS32 M4K PIC microcontroller running at 80 MHz with 128 KB Flash and 32 KB RAM, packaged in a 100-pin TQFP (12x12 mm) and equipped with on-chip USB 2.0 full-speed and CAN 2.0B peripherals plus 4-channel DMA. According to the Microchip product listing, this device integrates 53 digital I/O, multiple serial interfaces (UART, SPI, I2C), a 10-bit ADC and 16-bit parallel master port, addressing connected-embedded designs that demand deterministic real-time response and peripheral-rich integration on a single die. A 32-bit microcontroller (MCU) is a microprocessor core combined with on-die Flash program memory, SRAM data memory and a peripheral set in a single integrated circuit. PIC32MX5xx parts sit in Microchip's PIC32 family, which targets the MIPS32 M4K architecture - bridging 8/16-bit PIC MCU scalability with 32-bit performance for USB, CAN, graphics and audio bridging applications. The hypernym hierarchy is: PIC32MX564 subfamily -> PIC32MX5xx family -> PIC32 series -> 32-bit MCU -> microcontroller -> integrated circuit -> semiconductor. Key features include a 32-bit MIPS M4K core with 1.56 DMIPS/MHz, hardware multiply/divide, 128 KB Flash (128K x 8), 32 KB SRAM, 4-channel DMA, full-speed USB 2.0 device/host/OTG, CAN 2.0B active, two I2C, two SPI, two UART, a 16-bit Parallel Master Port (PMP) for graphics/parallel memory and a 10-bit 1 Msps ADC. The 100-pin TQFP exposes 53 digital I/O lines, supporting multiple 5V-tolerant pins, hardware PMP bus and ICSP debugging. Technical depth: the M4K core executes most instructions in one clock, giving 80 MHz core operation ~80 MIPS sustained throughput, with single-cycle 32-bit multiply and hardware divide. The 4-channel DMA engine offloads peripheral-to-memory and memory-to-memory transfers, freeing the core for control code. The 16-bit PMP enables direct connection to graphical LCDs, parallel SRAM and FPGA slaves. The integrated USB PHY supports low-speed, full-speed and full-speed OTG modes without external transceivers in most configurations. Typical applications include industrial USB-to-CAN bridges, automotive infotainment subsystems (CAN node controllers), HMI panels with TFT LCDs using the Parallel Master Port, USB device/host bridges (barcode scanners, data loggers), and CAN-based sensor nodes. Designers select this part for code density advantages (one instruction per word vs 8-bit PIC) plus deterministic interrupt latency. Design considerations: the 100-pin TQFP requires a 4-layer PCB with thermal relief for the 80 MHz switching current; 0.1 uF ceramic decoupling is recommended within 5 mm of every VDD/VSS pair. For USB designs, route D+/D- as a 90 ohm differential pair and place the 48 MHz crystal within 5 mm of the OSC pins. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $4.78 有现货
PIC32MX564F128LT-V/BG - 32-bit 80MHz 128KB Flash MCU | Microchip
PIC32MX564F128LT-V/BG

PIC32MX564F128LT-V/BG - 32-bit 80MHz 128KB Flash MCU | Microchip

The Microchip Technology PIC32MX564F128LT-V/BG is a 32-bit MIPS MCU from the PIC32MX5xx family, integrating 128 KB Flash and 32 KB SRAM in a 121-ball TFBGA (10x10 mm) package with USB-OTG, CAN, 10-bit ADC, and DMA. It runs at up to 80 MHz core clock, provides 85 I/O pins, and supports industrial and automotive-grade operating temperature ranges (the V suffix indicating -40C to +105C). A 32-bit microcontroller (MCU) is a single-chip computer built around a 32-bit data path and registers, allowing larger address spaces (>4 GB), richer instruction sets, and higher throughput than 8-bit or 16-bit MCUs. The PIC32MX family specifically uses the MIPS32 M4K core licensed from MIPS Technologies, combining Harvard-architecture performance with deterministic interrupt response. Within the broader taxonomy, the PIC32MX5xx belongs to: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS MCU -> PIC32 -> PIC32MX5xx. It is suitable as a general-purpose embedded controller that bridges 16-bit PIC24/dsPIC performance with ARM Cortex-M3 alternatives. Key features include 128 KB Flash program memory, 32 KB SRAM, full-speed USB-OTG on-chip transceiver, CAN 2.0B module, 16-channel 10-bit 1 MSPS ADC, four DMA channels for CPU-offload data movement, two UART, two SPI, two I2C, five 16-bit timers/captures, and parallel master port. The device includes fail-safe clock monitoring, two internal oscillators (8 MHz and 31 kHz), a hardware real-time clock/calendar with alarms, and a watchdog timer with a dedicated RC oscillator. Pin compatibility with 16-bit PIC MCUs simplifies migration from dsPIC/PIC24 designs. The architecture pairs a 5-stage MIPS32 M4K pipeline with single-cycle hardware multiply/divide and a tightly-coupled prefetch cache, giving Dhrystone 2.1 performance of approximately 1.5 DMIPS/MHz. The 10-bit successive-approximation ADC plus four-channel DMA enables continuous analog sampling without CPU intervention, while USB-OTG and CAN together make the part a strong fit for industrial bridging nodes. Typical applications include USB peripherals (HID, CDC, MSD, audio), CAN-based automotive body controllers, industrial PLCs and sensor hubs, and medical instrumentation requiring deterministic USB connectivity. The wide peripheral set also fits smart-grid metering and HMI panels. Design tip: BGA packages require via-in-pad or microvia PCB processes; ensure the design rules for the TFBGA-121 footprint match Microchip's recommended land pattern and that the inner balls are inspected post-reflow using X-ray. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $4.97 有现货
PIC32MX570F512H-50I/MR - 50MHz 512KB Flash MCU | Microchip
PIC32MX570F512H-50I/MR

PIC32MX570F512H-50I/MR - 50MHz 512KB Flash MCU | Microchip

The Microchip PIC32MX570F512H-50I/MR is a 32-bit microcontroller based on the MIPS32 M4K core, delivering 50 MHz / 83 DMIPS performance in a 64-pin QFN (9x9 mm) package. It integrates 512 KB of Flash program memory and 64 KB of SRAM, with two I2S and four SPI modules for codec and serial communications, USB 2.0 Full-Speed OTG, and a CAN 2.0B controller with DeviceNet addressing support. A 32-bit microcontroller (MCU) is a microprocessor that integrates CPU, RAM, non-volatile memory (Flash), and peripherals on a single silicon die. The PIC32MX family uses a Harvard-architecture MIPS32 core optimized for deterministic real-time control with single-cycle multiplication and hardware multiply-accumulate. Compared with 8-bit/16-bit MCUs, 32-bit devices like the PIC32MX570 enable richer HMI (human-machine interface) applications, larger protocol stacks (USB, CAN, TCP/IP), and more complex DSP-style signal processing, while still retaining the deterministic interrupt latency characteristic of PIC microcontrollers. Key features include Peripheral Pin Select (PPS) for flexible I/O mapping, a Parallel Master Port (PMP) with dual read/write buffers for graphics interfaces, three I2S/SPI modules, a 10-bit ADC, and a Charge Time Measurement Unit (CTMU) for capacitive touch sensing. The device operates from 2.3 V to 3.6 V across an industrial temperature range of -40°C to +85°C, and is suitable for audio playback, USB peripherals, and CAN-connected industrial nodes. The architecture combines a 5-stage MIPS pipeline with dedicated multiply/divide hardware and a zero-overhead hardware loop counter, enabling efficient execution of signal-processing routines. Up to 16 DMA channels reduce CPU load during high-throughput peripheral transfers, and the PMP can directly drive external parallel displays or memory-mapped peripherals without glue logic. Typical applications include USB audio devices (headsets, speakers, mixers), HMI panels with graphics displays and capacitive touch, CAN-connected industrial sensors, and embedded graphics controllers. The compact 64-pin QFN package and integrated USB-PHY-compatible pins simplify board layout for space-constrained consumer products. When designing with the PIC32MX570F512H-50I/MR, allocate a minimum 0.1 µF decoupling capacitor per VDD/VSS pin pair placed within 3 mm of the package, and provide a bulk capacitor of at least 4.7 µF near the VDDCORE pin. The device uses 2.3-3.6 V I/O; signals to 5 V logic require level translation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate the PIC32MX570F512H-50I/MR against competing 32-bit MCU families.

USD $4.25 有现货