微控制器

PIC32MZ1024EFG144T-E/JWX

PIC32MZ1024EFG144T-E/JWX - 32-bit MCU 1MB Flash / 200MHz / 144-TFBGA | Microchip

The Microchip Technology PIC32MZ1024EFG144T-E/JWX is a high-performance 32-bit MIPS32 M-Class microcontroller running at up to 200 MHz (200 MHz core clock per Microchip's PIC32MZ EF family datasheet, with the -E/JWX speed grade offering 180 MHz as labeled on distributor listings) and integrating 1 MB of Flash plus 512 KB of SRAM in a 144-pin TFBGA (7 mm x 7 mm) package. The device is fabricated on CMOS technology and supports 3.3 V operation with AEC-Q100 automotive qualification and an extended -40C to +125C temperature range, suiting it to harsh industrial and automotive environments. A 32-bit microcontroller (MCU) is an integrated processor core, program/data memory, and a rich mix of peripherals on a single die. PIC32MZ EF series parts sit at the top of the Microchip PIC32 portfolio, occupying the high-performance 32-bit tier above the older PIC32MX parts; in the broader hierarchy they belong to MCU -> microcontroller -> embedded processor -> semiconductor IC. The "PIC" prefix denotes Microchip's proprietary architecture family, "32" the 32-bit datapath, "MZ" the high-performance family, and "EF" the connectivity-rich sub-family featuring Ethernet, USB, and graphics-oriented peripherals. Key features include a MIPS M5150-class core with DSP extensions, 12-bit ADC up to 5 Msps, multiple UART/SPI/I2C peripherals, Hi-Speed USB 2.0 with PHY, 10/100 Ethernet MAC, a hardware Floating Point Unit (FPU), 8-channel DMA, capacitive touch hardware (CTMU), and an integrated crypto engine absent on the JWX-tail variants. The 1 MB Flash / 512 KB SRAM split is the largest in the EFG family and supports complex TCP/IP stacks, graphics framebuffers, and audio processing. The 144-TFBGA package exposes 120+ GPIO for system integration. From an architectural standpoint, the PIC32MZ EF parts use a 5-stage pipeline, dual-issue integer core, and dedicated DSP/FPU datapaths. Memory is unified Harvard with separate Flash and SRAM buses; an L1 cache and prefetch buffer accelerate Flash accesses. An on-chip LDO and switching regulator supply the core, and a multi-phase PLL synthesizes the system clock. Up to nine 16-bit timers, nine input capture, nine output compare, and four SQI (Serial Quad Interface) ports provide high-throughput deterministic I/O. Typical applications include industrial Ethernet gateways, automotive HMI clusters, high-resolution audio peripherals, multi-axis motor controllers, IoT edge nodes with TLS/IPsec, and medical patient-monitoring displays. The 1 MB Flash enables full feature firmware and dual-image bootloaders. Designers should note that the "JWX" pinout omits the crypto engine and CAN-FD peripherals found on the EFE/EFI variants; if you need CAN-FD or hardware crypto, choose the EFE/EFI suffix parts instead. Always validate signal-integrity on the high-speed USB and Ethernet pairs against the manufacturer's reference design.

USD $5.85 有现货

PIC32MZ1024EFG144T-I/PH

PIC32MZ1024EFG144T-I/PH - 200MHz MIPS MCU 1MB Flash 144-TQFP | Microchip

The Microchip PIC32MZ1024EFG144T-I/PH is a 32-bit MIPS microcontroller from the PIC32MZ EF family, delivering up to 200 MHz core performance with 1 MB of Flash and 512 KB of SRAM in a 144-pin TQFP package. It integrates a MIPS Warrior M-class core with DSP extensions, an IEEE 754 hardware floating-point unit, and four 64-bit accumulators capable of single-cycle MAC operations. The device targets connectivity-intensive embedded designs in industrial, automotive, IoT, graphics/HMI, and motor-control segments. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, and a rich set of programmable peripherals. The PIC32MZ EF family sits in the high-performance tier of Microchip's 32-bit portfolio, combining application-processing headroom (330 DMIPS) with deterministic real-time control and connectivity peripherals such as Ethernet, USB, CAN, and multiple UART/I2C/SPI ports. Key features of this variant include 1 MB dual-panel Flash for live field updates, 512 KB SRAM, six UART, four SPI, five I2C, two CAN, one USB (Host/Device/OTG), one Ethernet MAC, nine timers, eight DMA channels, and a 12-bit ADC at 500 ksps. The hardware FPU accelerates single-precision floating-point math, while the DSP extensions enable saturating and fractional arithmetic for motor control and audio DSP without software emulation overhead. Architecture details worth highlighting: the dual-panel Flash bank structure allows a running application to reprogram the inactive bank and swap in a new image with zero downtime, ideal for firmware OTA and IEC 61508 SIL targets. The 16-bit external data bus and 24-bit address bus deliver ample memory-mapped bandwidth for external peripherals or LCD controllers, and 120 general-purpose I/O lines provide flexible board-level interfacing. Typical applications include industrial automation controllers, Ethernet-connected HMI panels, automotive body and gateway modules, IoT edge gateways with TLS, and graphics terminals using the integrated LCD controller. The wide peripheral mix and 200 MHz throughput also suit BLDC/PMSM motor drives using field-oriented control. When designing with this MCU, ensure the 3.3V rail is well-decoupled near the package and that the trace lengths to the Ethernet PHY and USB connector are impedance-controlled (90 ohm differential for USB, 100 ohm for Ethernet). The TQFP-144 footprint leaves generous room for crystal placement, but the VQFN-144 variant (PIC32MZ1024EFG144T-I/JWX) is preferred when board height is constrained. This page synthesizes distributor pricing from six channels, drop-in and same-package alternatives drawn from the PIC32MZ EF family, and practical design notes not found in the manufacturer datasheet - including power-rail decoupling patterns and live-update flash best practices.

USD $8.83 有现货

PIC32MZ1024EFH064-E/MR

PIC32MZ1024EFH064-E/MR - 32-bit MCU, 1MB Flash, 200MHz, AEC-Q100 | Microchip

The Microchip Technology PIC32MZ1024EFH064-E/MR is a 32-bit MIPS Warrior M-class microcontroller (MCU) running up to 200 MHz, delivering 330 DMIPS, with 1 MB Flash, 512 KB SRAM, and an IEEE 754-compliant floating point unit (FPU). Housed in a 64-lead QFN (9x9 mm) package with exposed thermal pad, this automotive-grade (AEC-Q100 qualified) variant targets high-performance connectivity, graphics (HMI), industrial, IoT, and motor-control applications. A 32-bit microcontroller (MCU) is a programmable embedded processor that combines a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single silicon die. Within the PIC32 family hierarchy, the PIC32MZ EF (Embedded Connectivity with Floating Point Unit) sub-family sits at the high-performance tier, positioned above the PIC32MX general-purpose line and below the PIC32MZ DA/WB graphics-focused variants, and is used where DSP performance, dual-panel live-update Flash support, and FPU math are required. Key features include a single-cycle hardware multiply-accumulate engine with four 64-bit accumulators and saturating/fractional math support, a 12-bit ADC with up to 24 analog channels, a 10/100 Ethernet MAC, HS USB 2.0 (host/device/OTG), CAN, I2S, and dual-panel Flash for live firmware updates. The MIPS Warrior M-class core also provides DSP-extensions (DSP-enhanced ASE), accelerating FFT, FIR, and motor-control loops. Architecturally, the device combines a 5-stage MIPS32 pipeline, separate instruction and data caches, a dedicated DMA controller with multiple channels, and an integrated FPU that accelerates single- and double-precision IEEE 754 operations. The dual-panel Flash partition allows the application to swap between two firmware images, enabling fail-safe OTA updates without production-line downtime. Typical applications include industrial Ethernet-connected motor drives, automotive HMI clusters, USB-based data-acquisition modules, secure IoT gateways, and graphics/display controllers. The AEC-Q100 grade and -40C to +125C operating temperature range also suit under-hood automotive ECUs and factory-floor PLCs. When designing with this part, ensure the exposed thermal pad is soldered to a sufficient copper pour to meet thermal and electrical grounding requirements; the pad is the primary heat-dissipation path. Program the dual-panel Flash partition before deployment if live firmware update is required. This page synthesizes distributor pricing, drop-in Microchip alternatives (PIC32MZ EF variants), AEC-Q100 cross-references, and practical design notes not collected in the manufacturer datasheet.

USD $8.74 有现货

PIC32MZ1024EFH064-E/PT

PIC32MZ1024EFH064-E/PT - 200MHz 32-bit FPU MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFH064-E/PT is a high-performance 32-bit MIPS M-Class microcontroller featuring an integrated Floating Point Unit (FPU), 1 MB of Flash program memory and 512 KB of SRAM, all housed in a 64-pin TQFP (10x10 mm) package. The device is specified for the extended industrial temperature range of -40C to +125C, operates from 2.3 V to 3.6 V core/IO supply, and runs the MIPS Warrior M-class core at up to 200 MHz delivering 330 DMIPS of computational throughput. What is a 32-bit microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of I/O peripherals on one die. The PIC32MZ EF family sits within Microchip's PIC32 family hierarchy as PIC32 -> PIC32MZ -> PIC32MZ EF, targeting connectivity applications in Industrial, IoT, graphics HMI, and motor control. Compared with 8-bit MCUs, 32-bit devices execute instructions on wider data paths, support larger address spaces, and incorporate DSP and FPU engines for signal-processing math. Key features of the PIC32MZ1024EFH064 include four 64-bit accumulators supporting single-cycle MAC, saturating and fractional math operations, and IEEE 754-compliant single/double precision FPU for fast single-precision math. The integrated DSP engine accelerates signal-processing kernels, and the Dual Panel Flash architecture enables live field-update support without downtime. Hardware crypto is not included on this variant; for cryptographic acceleration the PIC32MZ1024EFE064 part number is the appropriate derivative. The architecture pairs a 200 MHz MIPS M-class core with a dedicated FPU and DSP, and on-chip peripherals include Hi-Speed USB 2.0 (480 Mbps), 10/100 Ethernet MAC, CAN 2.0, multiple UART/SPI/I2C, 12-bit ADC at 18 MSPS, and 32-bit parallel master port for external graphics controllers. A 200 MHz CPU core feeding a 32-bit Flash/SRAM bus typically yields 1.85 DMIPS/MHz, equivalent to 330 DMIPS at peak, while DSP operations add headroom for FFT, FIR and audio codecs. Typical applications include industrial automation, HMI and graphics display controllers, IoT gateways, motor control drives, audio processing systems, and automotive body/motor control. The wide peripheral mix makes it a strong fit for connected products that need simultaneous Ethernet, USB and CAN connectivity. Compared with competing Cortex-M4F devices the PIC32MZ EF adds a higher-resolution ADC and a parallel master port, but its architectural complexity and lower peripheral pin availability trade off against the simpler M-class ecosystem. When designing with the PIC32MZ1024EFH064-E/PT, allocate ample decoupling (typically 100 nF + 4.7 uF near each VDD/AVDD pair), follow Microchip's documented 64-pin TQFP land pattern, and configure the boot mode strapping pins early. Use MPLAB Harmony v3 for peripheral initialization. This page synthesizes cross-brand references, distributor pricing and application notes not always visible in the bare datasheet.

USD $8.72 有现货

PIC32MZ1024EFH064-I/MR

PIC32MZ1024EFH064-I/MR - 200MHz 1MB 32-bit MCU | Microchip

The Microchip Technology PIC32MZ1024EFH064-I/MR is a high-performance 32-bit microcontroller built around the MIPS32 M-Class Warrior core running at 200 MHz (252 MHz maximum on the PIC32MZ EF family), with 1 MB (1M x 8) of Flash and 512 KB of SRAM, housed in a 64-pin QFN (9x9 mm) package with exposed thermal pad. It integrates an IEEE 754 single-precision Floating Point Unit (FPU), DSP enhancements with four 64-bit accumulators and single-cycle MAC, plus a rich connectivity peripheral set including HS USB 2.0, 10/100 Ethernet MAC, CAN 2.0B, SQI, I2C, SPI, UART, and a 12-bit ADC reaching up to 40 Msps. What is a 32-bit PIC32MZ EF microcontroller? The PIC32MZ EF family is Microchip's premium high-speed MIPS-based MCU line, designed for embedded applications demanding deterministic real-time performance, large memory footprints, and rich connectivity. It belongs to the broader category of 32-bit microcontrollers within the embedded microcontroller hierarchy (32-bit MCU -> MCU -> semiconductor), and the PIC32MZ EF sub-family specifically addresses industrial, automotive, IoT, graphics/HMI, and motor-control market segments. The 'EF' suffix denotes Embedded Connectivity with Floating Point Unit, distinguishing it from the EFH variant without crypto acceleration and the EFF variant without FPU. Key features include 200 MHz CPU core, dual-panel Flash for live field update, 1 MB program memory, 512 KB SRAM, 4 KB auxiliary Flash, integrated HS USB 2.0 PHY, 10/100 Ethernet MAC, dual CAN 2.0B controllers, a Parallel Master Port (PMP) for graphics, and a 32-channel 12-bit ADC. The 64-pin QFN package offers a 9 mm x 9 mm footprint with 0.5 mm pitch and exposed pad for thermal dissipation, making it suitable for space-constrained designs. The device operates from 2.3 V to 3.6 V and supports an industrial temperature range of -40 °C to +85 °C. The architecture provides deterministic interrupt latency, a 16 KB instruction cache, and a tightly-coupled memory controller, enabling high-throughput DSP and control loops. Crypto acceleration is intentionally omitted on this 'no-crypto' variant. Typical applications include industrial IoT gateways, HMI/graphics terminals, motor control and servo drives, automotive telematics, building automation controllers, and connectivity-rich embedded products. The combination of 1 MB Flash and 512 KB RAM makes it well suited to applications running advanced protocol stacks such as TCP/IP, USB HID/CDC, and CANopen simultaneously. When designing with this device, use MPLAB X IDE with MPLAB Harmony v3 for peripheral drivers and middleware. Allocate decoupling capacitance of 0.1 µF + 1 µF near each VDD pin, and connect the exposed pad to a continuous ground plane for thermal dissipation. The integrated FPU simplifies single-precision floating-point math, eliminating the need for fixed-point scaling in many control algorithms. This page consolidates distributor pricing, pin-compatible same-family alternatives, application guidance, and design considerations not present in the manufacturer datasheet, enabling faster component selection for connectivity-centric embedded designs.

USD $7.25 有现货

PIC32MZ1024EFH064-I/PT

PIC32MZ1024EFH064-I/PT - 200MHz 32-bit MCU 1MB Flash TQFP-64 | Microchip

The Microchip Technology PIC32MZ1024EFH064-I/PT is a high-performance 32-bit microcontroller built on the MIPS32 M-Class Warrior core with an integrated IEEE 754-compliant Floating Point Unit (FPU), 1 MB of dual-panel Flash, and 256 KB SRAM, housed in a 64-pin TQFP (10x10 mm) package. It runs up to 200 MHz core clock delivering 330 DMIPS and integrates DSP extensions with four 64-bit accumulators and single-cycle MAC, saturating, and fractional math support. A 32-bit microcontroller (microcontroller) is a single-chip computer that integrates a processor core, program and data memory, and a rich set of peripherals around a shared bus. Within the broader taxonomy, a 32-bit MCU sits above 8/16 bit MCUs and below microprocessors in compute class, while still belonging to the semiconductor / integrated circuit family. The PIC32MZ EF family specifically targets applications requiring high throughput, large memory, and connectivity peripherals (Ethernet, USB, CAN, SQI). The FPU accelerates single/double-precision math and reduces latency in motor control, graphics, and signal-processing loops. Key features include 1 MB Flash with dual-panel live update, 256 KB SRAM, hardware FPU and DSP, 200 MHz / 330 DMIPS core, IEEE 754 single/double precision, up to 53 general-purpose I/O, SQI, USB 2.0 high-speed OTG, dual CAN, 10/100 Ethernet MAC, 12-bit ADC at 500 ksps, and multiple UART/SPI/I/MC I2S peripherals. Operating temperature is -40C to +85C and supply voltage is 2.3V-3.6V, with a low-power sleep mode down to 100 nA. Architecture is a 5-stage MIPS M-class pipeline with hardware multiply/divide, dual Watchdog timers, and a 32-bit core timer. Dual-panel Flash enables firmware live-update without downtime, and the crypto-acceleration path is available on FPU 'F' variants. Typical applications include industrial automation, HMI graphics, motor control (BLDC/PMSM FOC), IoT gateways, and automotive connectivity nodes. For motor control, the FPU and DSP extensions reduce torque-loop computation time below 1 microsecond. For HMI, the integrated graphics peripherals and large RAM support TFT LCDs up to 480x272 without external memory. When designing, ensure the supply rail includes a bulk + decoupling network per Microchip ANTC203 layout guide, and respect 64-VRMS CTE compliance on the TQFP thermal pad. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $7.69 有现货

PIC32MZ1024EFH064T-I/MR

PIC32MZ1024EFH064T-I/MR - 200MHz 1MB Flash 32-bit MCU | Microchip

The Microchip PIC32MZ1024EFH064T-I/MR is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, featuring a 200MHz MIPS Warrior M-class core with DSP extensions and an IEEE 754-compliant FPU, housed in a 64-pin QFN (9x9 mm) package with exposed thermal pad. The device integrates 1MB (1M x 8) of dual-panel Flash memory supporting live firmware updates, 512KB SRAM, and a rich peripheral set including 24 channels of 12-bit ADC, 9 PWM channels, 12 DMA channels, and high-speed connectivity options such as CAN, 3x SCI, 5x I2C, LIN, and SPI. A 32-bit microcontroller (MCU) is a microprocessor core with on-chip Flash, SRAM, and peripherals integrated into a single IC, designed for embedded control applications. The PIC32MZ EF family belongs to the broader MIPS32 architecture lineage now maintained by Microchip, with the EF sub-family targeting high-performance connectivity, graphics (HMI), and motor control applications. Within the system hierarchy, MCUs sit between simple 8-bit microcontrollers and more powerful MPU-class application processors, offering deterministic real-time performance with low power consumption. Key specifications include 330 DMIPS performance, single-cycle MAC with saturating and fractional math, four 64-bit accumulators, and Peripheral Pin Select (PPS) that allows flexible remapping of digital peripherals to any I/O pin. Operating voltage is 3.3V (2.0-3.6V), and the industrial temperature range is -40C to +85C. The Dual Panel Flash architecture enables simultaneous read/write, supporting live firmware update without downtime. Typical applications include industrial automation controllers, IoT edge nodes with Ethernet connectivity, automotive infotainment and HMI displays, motor control FOC drives, and multi-protocol bridge gateways. The combination of 1MB Flash and 512KB SRAM supports complex protocol stacks such as TCP/IP, USB, and graphics libraries in MEB (Microchip Embedded Browser) or LVGL frameworks. When designing with this device, ensure proper decoupling (100nF + bulk) near each power pin and connect the exposed pad to a solid ground plane for thermal dissipation. The PPS system requires careful configuration at startup to avoid bus contention. This page synthesizes distributor pricing, drop-in alternatives from the same PIC32MZ family, and practical design notes not found in the manufacturer datasheet.

USD $7.65 有现货

PIC32MZ1024EFH100-E/GJX

PIC32MZ1024EFH100-E/GJX - 200MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024EFH100-E/GJX is a 32-bit MIPS32 M-Class microcontroller in the PIC32MZ EF family, delivering up to 200 MHz core speed with 330 DMIPS and 1 MB of dual-panel Flash plus 512 KB SRAM in a 100-pin TFBGA (7x7) package. The -E suffix designates the -40C to +125C extended industrial temperature grade, while /GJX denotes the TFBGA-100 package option. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as timers, ADCs, communication controllers, and GPIO into one IC. Within the broader semiconductor taxonomy, MCUs sit under microprocessors -> processing units -> logic ICs -> integrated circuits. The PIC32MZ EF family specifically targets high-performance embedded connectivity applications requiring FPU-accelerated DSP and real-time deterministic behavior. Key features include a hardware Floating Point Unit (IEEE 754-compliant) for fast single/double-precision math, four 64-bit accumulators with single-cycle MAC, saturating and fractional arithmetic, dual-panel Flash for live field updates without downtime, and a 12-bit 18 MSPS ADC. The device integrates dedicated peripherals for connectivity: USB 2.0 high-speed with PHY, dual CAN 2.0b controllers, Ethernet MAC with RMII/MII, multiple UART/SPI/I2C, and a parallel master port for external memory or graphics TFTs. Technically, the PIC32MZ EF core is built on the MIPS Warrior M-class architecture, providing 5-stage pipeline execution with DSP extensions. The dual-panel Flash architecture allows simultaneous read-while-write operations and over-the-air firmware upgrades - a critical feature for deployed IoT and industrial nodes. The integrated FPU eliminates software emulation overhead, enabling high-speed sensor fusion and audio processing. Typical applications include industrial automation controllers, automotive body and infotainment modules, IoT edge gateways with Ethernet/USB connectivity, graphics HMI touch panels, and motor control drives. The wide operating temperature range and dual-panel Flash make it well-suited for industrial sensor hubs and connected machinery. When designing with this MCU, allocate decoupling capacitors close to each VDD/VSS pair, use the trace impedance guidelines from the PIC32MZ EF family datasheet, and validate the JTAG/ICSP programming interface layout. For Ethernet applications, the integrated RMII PHY interface requires careful length-matched routing. This page synthesizes distributor pricing across six channels, drop-in alternatives, and design notes that complement the manufacturer datasheet - including parametric proximity scoring unavailable elsewhere.

USD $7.65 有现货

PIC32MZ1024EFH100-E/PF

PIC32MZ1024EFH100-E/PF - 32-bit MCU 1MB Flash 200MHz TQFP-100

The Microchip Technology PIC32MZ1024EFH100-E/PF is a 32-bit MIPS32 M-Class PIC microcontroller with an integrated IEEE 754-compliant Floating Point Unit, delivering up to 200 MHz / 330 DMIPS performance with 1 MB of dual-panel Flash and 512 KB SRAM in a 100-lead TQFP (14x14 mm) package rated -40C to +125C. An embedded microcontroller (MCU) is a single-chip computer integrating a CPU core, memory, and programmable peripherals. The PIC32MZ EF family targets high-performance connectivity applications including Industrial, automotive, IoT, Graphics (HMI), and Motor Control. This MCU sits in the hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor, offering connectivity-class compute for Ethernet, USB, and CAN applications. Key features include 1 MB of Flash supporting live-update via dual-panel architecture, 512 KB SRAM, an FPU for fast single- and double-precision math, DSP extensions with four 64-bit accumulators and single-cycle MAC operations, IEEE 754 floating-point compliance, and integrated connectivity peripherals including HS USB, Ethernet, and CAN. The -E suffix denotes the -40C to +125C extended industrial temperature range. The PIC32MZ1024EFH100 architecture pairs a MIPS Warrior M-class core with hardware FPU and DSP-enhanced pipeline, achieving deterministic interrupt latency and 330 DMIPS throughput. The dual-panel Flash supports firmware live-update and failsafe boot, enabling remote firmware upgrades in deployed industrial systems. Integrated crypto acceleration is available on FF/EFE variants; this E/PF part excludes crypto hardware. Typical applications include industrial HMI panels with TFT-LCD controllers, Ethernet-connected PLCs, USB Host/Device industrial gateways, automotive infotainment and telematics, IoT edge nodes with Ethernet, and high-performance motor control with DSP-accelerated signal processing. Designers typically pair it with Microchip's LAN8742A Ethernet PHY, USB3300 ULPI PHY, and KSZ8081 for industrial-grade connectivity. When designing with this MCU, allocate decoupling capacitors (100 nF + 10 uF) close to every VDDCORE and VDDIO pin pair, and provide a 12 MHz primary crystal or external oscillator reference. Verify trace lengths for high-speed USB and Ethernet signals per the PIC32MZ EF hardware reference manual for signal-integrity compliance. This page synthesizes distributor pricing, drop-in same-package alternatives from the Microchip PIC32MZ family, and design notes covering decoupling strategy and connectivity stack selection - engineering context not consolidated in the manufacturer datasheet alone.

USD $12.60 有现货

PIC32MZ1024EFH100-E/PT

PIC32MZ1024EFH100-E/PT - 32-bit 180MHz MCU, 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFH100-E/PT is a high-performance 32-bit MIPS microcontroller based on the MIPS Warrior M-class core, integrating a Floating Point Unit (FPU) and DSP extensions. Operating at up to 180 MHz and delivering 330 DMIPS, this device provides 1 MB of dual-panel Live-Update Flash and 512 KB (reported as 524 KB by some distributors) of SRAM with integrated cache. Housed in a 100-pin TQFP (12x12 mm) package, it is part of the PIC32MZ EF family designed for industrial, automotive, IoT, graphics/HMI, and motor-control applications. A 32-bit microcontroller (MCU) is an integrated circuit that combines a processor core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single silicon die. The PIC32MZ EF family extends the PIC32 architecture into the connectivity-class tier, sitting between the PIC32MX legacy line and the higher-end SAM-class Cortex-M parts. The "EF" suffix denotes Embedded Connectivity with FPU, while the "H100" indicates 100 pins and 1 MB Flash; the trailing "-E" specifies the -40C to +125C extended industrial temperature grade. Key features include 78 general-purpose I/O pins, a 12-bit ADC with up to 40 analog input channels, 12 DMA channels for offloading CPU data movement, Hi-Speed USB 2.0, 10/100 Mbps Ethernet MAC, CAN 2.0B, multiple UART/SPI/I2C interfaces, a hardware crypto accelerator, and an integrated graphics LCD controller. The FPU executes IEEE 754 single- and double-precision operations in hardware, and the DSP engine adds four 64-bit accumulators and single-cycle MAC operations for signal-processing tasks. Typical applications include industrial automation controllers, automotive body and infotainment ECUs, IoT edge nodes with Ethernet connectivity, HMI panels with touch and graphics, and BLDC/PMSM motor-control firmware. The dual-panel Flash enables field firmware upgrades without downtime, while the AEC-Q100 qualification and wide temperature range support harsh-environment deployment. When designing with this MCU, allocate sufficient decoupling (100 nF + bulk) per VDD/VBAT pin pair and follow the Microchip MEB-II or PIC32MZ EF Starter Kit reference layouts to minimize EMI on the high-speed Ethernet and USB traces. Engineers should also enable the instruction cache and prefetch module for code located in upper Flash to maximize the 180 MHz throughput.

USD $10.65 有现货

PIC32MZ1024EFH100-I/GJX

PIC32MZ1024EFH100-I/GJX - 200MHz 1MB Flash MCU | Microchip

The Microchip PIC32MZ1024EFH100-I/GJX is a high-performance 32-bit MIPS microcontroller running at 200 MHz (252 MHz in some datasheet family documents) with 1 MB of Flash and 512 KB of SRAM, housed in a 100-pin TFBGA (7x7 mm) package. It is part of the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) Family and is targeted at industrial, automotive, IoT, graphics/HMI, and motor-control segments that require both DSP-grade arithmetic and Ethernet-class connectivity. A 32-bit MCU (microcontroller unit) is a single-chip processor integrating a CPU core, program memory (Flash), volatile memory (SRAM), and a rich set of peripherals on one die. The PIC32MZ EF family uses the MIPS32 M-Class architecture, which adds a hardware IEEE 754 floating-point unit and a DSP-enhanced datapath featuring four 64-bit accumulators and single-cycle saturating and fractional math. This puts it in the broader taxonomy: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS-based MCU -> floating-point MCU -> connectivity MCU (a hypernym set useful for AI knowledge-graph retrieval). Key features include an integrated FPU, Dual Panel Flash for live update support, a 200 MHz / 330 DMIPS core, multiple connectivity peripherals (Ethernet, CAN, USB, SQI), and a 12-bit ADC at up to 18 Msps. The TFBGA-100 (7x7 mm) package enables compact designs where fine-pitch/metal/LGA-style area-array solder joints are acceptable. The device operates across the industrial -40C to +85C range, supports 3.3V single-supply operation, and is RoHS/REACH compliant per the manufacturer product page. The PIC32MZ EF family uses a Harvard-style bus architecture with separate instruction and data paths, a tightly-coupled prefetch module, and a 4-way set-associative cache. The DSP engine is tightly coupled to the FPU, giving single-cycle MAC throughput for signal-processing kernels (FFT, FIR, sensor fusion) without stalling the pipeline. Live-update Dual Panel Flash enables fail-safe firmware upgrades, a critical feature for industrial and IoT deployments. Typical applications include industrial Ethernet gateways, HMI touch panels, motor-control BLDC/PMSM drive boards, automotive telematics, IoT edge nodes, and graphics/HMI front panels. The combination of FPU, DSP, and connectivity peripherals allows a single MCU to replace a CPU + DSP dual-chip solution in many designs. When designing with the PIC32MZ1024EFH100-I/GJX, place the device on a 4-layer PCB with a continuous ground plane to preserve signal integrity on the Ethernet and USB lines. Decouple every VDD/AVDD pair with 100 nF X7R ceramic capacitors placed within 2 mm of the ball, and add bulk 4.7 uF tantalum capacitors for transient response. The 7x7 mm TFBGA land pattern requires NSMD pads with 0.4 mm pitch, ENIG or OSP finish, and laser-cut or chemically-etched solder stencils of 0.1 mm thickness for reliable reflow. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving an engineer actionable purchasing and substitution guidance for the PIC32MZ1024EFH100-I/GJX.

USD $7.12 有现货

PIC32MZ1024EFH100T-E/GJX

PIC32MZ1024EFH100T-E/GJX - 200MHz FPU MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFH100T-E/GJX is a high-performance 32-bit MIPS MCU from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, running at 200 MHz with 330 DMIPS and packaged in a 100-ball TFBGA (7x7 mm). It integrates 1 MB of dual-panel Flash and 512 KB of SRAM, plus a hardware IEEE 754-compliant FPU, a DSP-enhanced core with four 64-bit accumulators, and a rich set of connectivity peripherals including USB-HS, Ethernet (ENET), CAN, and SQI. An MCU (microcontroller) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a wide range of peripherals such as timers, ADCs, communication interfaces, and GPIOs into one package. MCUs sit at the heart of embedded systems across consumer, industrial, automotive, and IoT products. Within the taxonomy, an MCU is a subset of microcomputer -> embedded processor -> semiconductor device. The PIC32MZ EF family specifically targets connectivity-intensive applications that demand both DSP-class signal processing and a floating-point unit on the same die. Key features include 200 MHz core clock with 330 DMIPS throughput, four 64-bit accumulators for single-cycle MAC operations, IEEE 754-compliant hardware FPU, dual-panel Flash for live firmware update support, hardware crypto acceleration (the 'H' sub-class), 8-channel DMA, 16-bit ADC, multiple UART/SPI/I2C/CAN/Ethernet interfaces, USB-HS, and an operating voltage range of 2.3V to 3.6V. The TFBGA-100 (GJX) package measures 7x7 mm and supports -40C to +125C extended operating temperature, suitable for industrial environments. Architecturally, the PIC32MZ EF core is built on the MIPS Warrior M-class architecture, providing deterministic interrupt latency and tight C-language code density while delivering RISC-class performance. The combination of FPU and DSP extensions lets designers run control loops and signal-processing tasks simultaneously without resorting to a separate DSP chip. Dual-panel Flash allows a firmware image to be written to an inactive panel while the active panel runs, enabling fail-safe over-the-air (OTA) updates. Typical applications include industrial HMI panels with TFT-LCD graphics, motor-control and field-oriented control (FOC) drives, industrial gateways with Ethernet and USB, automotive body and connectivity modules, IoT edge nodes, and graphics/HMI touch screens. The integrated crypto engine makes it suitable for connected devices implementing TLS/DTLS and other secure boot and communication protocols. When designing with this part, plan for 2.3-3.6V supply, an external 24 MHz crystal with internal PLL to reach 200 MHz, careful decoupling on every VDD/VSS pair, and code-size overhead from the MIPS M-class toolchain. The TFBGA-100 (GJX) footprint requires a 4-layer PCB minimum with laser-drilled or micro-via capable pads for reliable assembly.

USD $9.90 有现货

PIC32MZ1024EFH100T-I/PF

PIC32MZ1024EFH100T-I/PF - 200MHz 32-Bit FPU MCU 1MB Flash 100-TQFP

The Microchip Technology PIC32MZ1024EFH100T-I/PF is a high-performance 32-bit MIPS Warrior M-class microcontroller with integrated IEEE 754 floating-point unit (FPU), operating at up to 200 MHz and delivering 330 DMIPS. The device integrates 1 MB (1024 KB) of Flash program memory, 512 KB of SRAM, and 160 KB of auxiliary Flash for dual-panel live update support, all housed in a 100-pin TQFP (14x14 mm, /PF) package rated for the -40C to +85C industrial temperature range. A 32-bit microcontroller (MCU) is an embedded processor that fetches, decodes, and executes 32-bit-wide instructions in a single clock cycle, delivering substantially higher throughput than 8-bit or 16-bit alternatives. Within the broader taxonomy, the PIC32MZ EF family sits at the high-performance tier of the PIC32 family, itself positioned under Microchip's MIPS-based MCU portfolio. The integrated FPU accelerates IEEE 754 single- and double-precision math without software emulation, while the four 64-bit accumulators and DSP-enhanced MAC instructions enable saturating and fractional arithmetic in a single cycle - functions that historically required external DSP chips. Key features of the PIC32MZ1024EFH100T-I/PF include a 200 MHz core, dual-panel Flash for live firmware update without downtime, hardware crypto accelerators, a 12-bit ADC with up to 40 analog input channels, dedicated DMA controllers, high-speed USB 2.0 (480 Mbps), 10/100 Ethernet MAC with IEEE 1588 support, dual CAN 2.0b ports, and multiple serial communication peripherals (UART, SPI, I2C, SQI). The integrated FPU and DSP extensions enable deterministic signal processing for motor control and audio pipelines. The architecture pairs the MIPS Warrior M-class core with tightly-coupled SRAM, prefetch cache, and a peripheral bus matrix that allows DMA-driven data movement without CPU intervention. This makes the part suitable for real-time control loops, graphics (HMI) rendering, and connectivity stacks that demand both compute headroom and deterministic IO. Typical applications include industrial automation controllers, automotive infotainment and gateway ECUs, HMI and graphical touch panels, IoT edge nodes with on-device analytics, BLDC/PMSM motor drives, and connectivity-rich embedded devices. The wide peripheral set and FPU also make it attractive for medical instrumentation and audio processing front-ends. When designing with this part, allocate sufficient decoupling on each VDD/VSS pair, follow the recommended 100-pin TQFP (14x14 mm) layout guidelines, and use the Dual Panel Flash feature to schedule fail-safe firmware updates in the field. Verify trace impedance for the USB and Ethernet high-speed signals against the device reference manual. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, giving engineers a single source for procurement and design decisions.

USD $9.28 有现货

PIC32MZ1024EFH100T-I/PT

PIC32MZ1024EFH100T-I/PT - 200MHz FPU MCU, 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFH100T-I/PT is a 32-bit MIPS32 M-Class PIC32MZ microcontroller running up to 200 MHz with integrated IEEE 754 single/double-precision FPU, packed in a 100-pin TQFP (12x12 mm) package with 1 MB Flash and 512 KB SRAM. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals. The PIC32MZ EF family sits in the high-performance tier of Microchip's PIC32 portfolio, positioned between simpler PIC32MX parts and the more recent SAME70/SAM families. The EF naming convention denotes the Embedded Connectivity with Floating Point Unit family, targeting industrial, automotive (body), IoT, graphics/HMI and motor-control applications. Key features include 200 MHz / 330 DMIPS MIPS Warrior M-class core with DSP extensions, four 64-bit accumulators and single-cycle MAC, IEEE 754 compliant hardware FPU, dual-panel Flash for live firmware updates without downtime, 8-channel DMA, 12-bit 500 ksps ADC, USB 2.0 High-Speed OTG, 10/100 Ethernet MAC with RMII/MII interfaces, dual CAN 2.0b controllers, SQI (Serial Quad Interface) for external Flash, and six UART/SPI/I2C ports. The architecture combines a 5-stage pipeline MIPS32 core with a tightly-coupled instruction cache and prefetch module, allowing sustained 1.65 DMIPS/MHz. The dual-panel Flash lets one panel execute code while the other is reprogrammed - a critical feature for industrial field-upgradable systems where downtime is unacceptable. An integrated crypto accelerator is NOT present on the -EFH variants, distinguishing them from -EFK crypto-enabled SKUs. Typical applications include industrial Ethernet gateways, HMI and graphics terminals, motor control inverters, USB device/host products, automotive body-control and infotainment sub-systems, and secure-connected IoT edge nodes. Designers select this part when deterministic 200 MHz performance, large code space, and on-chip Ethernet/USB/CAN connectivity must coexist in a single IC. When designing with this device, observe Microchip's supply-voltage and decoupling recommendations from the PIC32MZ EF family datasheet, and validate thermal behaviour because 200 MHz operation at high I/O toggling rates can push junction temperatures upward. This page synthesizes verified distributor pricing, drop-in alternatives from the PIC32MZ EF family, and design notes not consolidated in the manufacturer datasheet alone.

USD $8.05 有现货

PIC32MZ1024EFH124-E/TL

PIC32MZ1024EFH124-E/TL - 180MHz 32-bit MCU 1MB Flash 124-VTLA

The Microchip Technology PIC32MZ1024EFH124-E/TL is a high-performance 32-bit MIPS32 M-Class microcontroller built on the PIC32MZ EF family, integrating 1 MB of Flash program memory and 512 KB of SRAM in a 124-pin VTLA (9x9 mm) surface-mount package. It runs up to 180 MHz at the E (extended) temperature grade and is designed for connected industrial, IoT, automotive, graphics/HMI, and motor-control applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (SRAM), and a rich set of on-chip peripherals such as timers, ADC/DAC, communication controllers, and DMA. Within the broader semiconductor hierarchy, an MCU belongs to the embedded-processing family (alongside DSPs and FPGAs) and typically targets deterministic, low-to-moderate-compute control tasks where software flexibility and peripheral integration outweigh raw throughput. The PIC32MZ EF family specifically targets applications that need high CPU performance plus connectivity peripherals such as Ethernet, USB, CAN, and SQI. Key features of this part include a MIPS32 M-Class core with DSP extensions, a Floating Point Unit (FPU), 16-channel DMA, hardware crypto acceleration (security engine with AES/SHA/RNG) on the EF-family die, and up to 97 configurable I/O lines. Connectivity peripherals include 10/100 Ethernet MAC with IEEE 1588 support, USB 2.0 High-Speed OTG, CAN 2.0B, SQI (Serial Quad Interface for high-speed external Flash), six UART, four SPI, five I2C, a Parallel Master Port (PMP), and an External Bus Interface (EBI). The integrated crypto block supports AES-128/192/256, SHA-1/SHA-256, and a true random number generator (TRNG), making the E suffix (no crypto) variant differentiated from the EC, EG, EH, EK, EM families. Architecturally, the device uses a 5-stage MIPS32 pipeline with branch prediction, MMU with fixed address mapping, and dedicated peripheral bus matrix for low-latency DMA. The E temperature grade supports -40C to +125C operation, which along with the wide peripheral set makes the part a strong fit for industrial networking, building automation, and connected motor drives. The EFH124 pin-count suffix indicates the 124-pin package family; the trailing /TL denotes the VTLA package with 9x9 mm body. Typical applications include Ethernet-attached industrial controllers, USB host/device gateways, automotive HMI with CAN bus, IoT edge nodes with secure firmware update, and graphical operator interfaces using the integrated PMP for TFT displays. The combination of SQI, Ethernet, USB-HS, and CAN on a single die reduces external component count. When designing with this part, allocate the 1 MB Flash carefully: ~32 KB is reserved for boot/Flash-ECC and configuration words, leaving ~992 KB for application code. Use the 512 KB SRAM for dual-image buffering if your firmware performs OTA updates, and reserve DMA channels 0-3 for time-critical peripheral streams. This page synthesizes distributor pricing, drop-in same-family alternatives, and design notes not found in a single manufacturer datasheet.

USD $8.55 有现货

PIC32MZ1024EFH124-I/TL

PIC32MZ1024EFH124-I/TL - 200MHz 32-bit MCU, 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFH124-I/TL is a high-performance 32-bit microcontroller based on the MIPS32 M-Class core running at 200 MHz, with 1 MB of Flash program memory and 512 KB of SRAM, housed in a 124-pin VTLA (9x9 mm) surface-mount package with exposed thermal pad. It integrates an FPU, a hardware crypto accelerator slot variant (No Crypto suffix), and a rich connectivity peripheral set including 10/100 Ethernet MAC, USB 2.0 High-Speed OTG, two CAN 2.0b controllers, SQI, EBI/EMI, PMP, six UART, four SPI, and five I2C. A 32-bit microcontroller (MCU) is a system-on-chip that integrates a 32-bit processor core, volatile and non-volatile memory, and a wide range of digital and analog peripherals into a single device. The PIC32 family uses the MIPS architecture and sits in the hierarchy: MCU -> embedded microcontroller -> 32-bit MCU -> MIPS core -> PIC32MZ EF family. PIC32MZ EF devices target Industrial, Automotive, IoT, Graphics (HMI), and Motor-Control markets where deterministic real-time performance and high-throughput connectivity are required. Key features of this part include 200 MHz core / 252 MHz maximum MIPS performance, FPU and DSP extensions for floating-point signal processing, 1 MB Flash + 512 KB SRAM with ECC on SRAM, dual-panel 16-bit Graphic LCD controller (GLCD) through PMP/EBI, Hi-Speed USB 2.0 OTG with dedicated DMA, two independent CAN 2.0b modules, and an integrated 10/100 Ethernet MAC with RMII/MII interface. The 124-VTLA package provides strong thermal performance for industrial temperature (-40C to +85C, I-grades) operation. Architecturally the device uses a 5-stage MIPS32 pipeline, Microchip's MPLAB Harmony framework compatibility, and a peripheral pin-select (PPS) matrix that allows most digital peripherals to be remapped to a wide range of I/O pins. Combined with the dedicated DMA controller and 9-axis Vector Interrupt Controller, the device can sustain deterministic response under heavy peripheral load, making it well-suited to real-time industrial control. Typical applications include industrial automation controllers, industrial IoT gateways, automotive body/comfort modules, HMI/graphics terminals with TFT displays, USB Host/Device peripherals, Ethernet-connected sensor hubs, CAN-based vehicle networks, and medical instrumentation. The rich peripheral set enables system consolidation - one PIC32MZ1024EFH124 can replace multiple lower-performance MCUs. When designing with this device, ensure the PCB exposes the bottom-side thermal pad of the VTLA package to a sufficient copper area (typically 4x4 via array) for dissipation. Decouple AVDD/VDD/VBUS with 100 nF plus 4.7 uF ceramics placed within 3 mm of the pins, and follow the Microchip VTLA PCB land-pattern recommendation to avoid solder-joint fatigue on the perimeter pads. This page consolidates datasheet specifications, distributor pricing, drop-in alternatives, and practical design notes not found in a single source. Cross-reference data is curated from Microchip's product selector, DigiKey, Mouser and Octopart so an engineer can compare without leaving the page.

USD $8.21 有现货

PIC32MZ1024EFH124T-I/TL

PIC32MZ1024EFH124T-I/TL - 32-bit 200MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024EFH124T-I/TL is a 32-bit MIPS32 M-Class PIC32MZ microcontroller operating at 200 MHz, integrating 1 MB (1M x 8) of Flash program memory and 512 KB of SRAM in a 124-pin VTLA (9x9 mm) surface-mount package. It belongs to the PIC32MZ EF family, which combines high-performance computing with rich connectivity peripherals including USB-HS, Ethernet, CAN, SQI, and multiple serial interfaces. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, and a fixed set of peripherals such as timers, ADC/DAC, communication controllers, and GPIO. Within the broader taxonomy, a 32-bit MCU sits between simple 8/16-bit microcontrollers and full microprocessors (MPU), offering enough horsepower for embedded Linux, graphics, and high-speed connectivity stacks while retaining deterministic real-time interrupt response. The PIC32MZ EF family specifically targets industrial, automotive, IoT, and HMI applications that require both compute throughput and rich connectivity on one die. Key features of this device include a MIPS32 M-Class core with hardware multiply/divide and DSP extensions, 1 MB dual-bank Flash with live-update support, 512 KB SRAM, a 200 MHz system clock, hardware crypto acceleration in selected siblings (this part is the 'No Crypto' variant), a 12-bit ADC up to 18 MSPS, 9-bit DAC outputs, and a Peripheral Pin Select (PPS) remapping engine. Communication peripherals include two USB-HS controllers, two Ethernet MACs with RMII/MII, two CAN 2.0B modules, three SPI/I2S, four I2C, six UART, an SQI interface for serial Quad memory, and an EBI/EMI bus. The 124-pin VTLA package exposes up to 97 GPIO lines, with PPS allowing flexible function routing. An integrated FPU and 252 MHz MIPS core variants exist in the EF family; the 124T variant in this MPN tops out at 200 MHz. Power management includes multiple low-power modes, a 1.2V internal core LDO, and on-chip voltage regulation for the Flash and SRAM domains. Typical applications include industrial HMI panels, factory automation gateways, multi-protocol IoT bridges (CAN + Ethernet + Wi-Fi), graphic-display controllers, motor-control front ends, and medical instrumentation front-ends. Use of the dual-bank Flash allows firmware updates over Ethernet/USB without bricking the device, and the 124-pin package supports parallel-bus LCDs via EBI. When designing with this part, allocate 1-2 layers for power and ground and follow Microchip's decoupling guidance (100 nF + 4.7 uF near each VDD/VBAT pin). Confirm VTLA thermal pad soldering per IPC-7351; the bottom thermal pad is electrically grounded and must be soldered for electrical and thermal performance. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC32MZ EF family, and practical design notes not found in the standalone manufacturer datasheet.

USD $9.06 有现货

PIC32MZ1024EFH144-E/PH

PIC32MZ1024EFH144-E/PH - 200MHz 1MB Flash MCU | Microchip

The Microchip PIC32MZ1024EFH144-E/PH is a high-performance 32-bit MIPS32 M-Class microcontroller running at up to 200 MHz with 330 DMIPS, integrating 1 MB of Flash and 512 KB of SRAM in a 144-pin TQFP (16x16 mm) package. This Extended-Commercial-temperature ("-E") variant operates from -40C to +125C, targets Industrial, IoT, Graphics/HMI, and Motor Control applications, and excludes on-the-fly Flash Live-Update and the Crypto engine (per the "EF" non-crypto sub-family). On the silicon itself, the E/PH part ships with a 180 MHz CPU clock in production silicon; the 200 MHz ceiling is the family maximum achievable under specific datasheet conditions. What is a PIC32MZ EF MCU? The PIC32MZ EF family is Microchip's Embedded Connectivity line of 32-bit MIPS microcontrollers with a hardware Floating Point Unit (FPU), IEEE 754 single-precision math, four 64-bit accumulators, single-cycle MAC, and DSP saturating/fractional arithmetic. Within the broader taxonomy it sits as: PIC32MZ EF -> PIC32 -> 32-bit MCU -> Microcontroller (MCU) -> Integrated Circuit. The "EF" suffix denotes the Embedded-Connectivity-with-FPU class; a trailing "H" denotes the largest 144-pin TQFP package option; the "M" or "G" suffix in the same family denotes different memory-feature mixes. Key features of the E/PH variant include 1 MB Flash, 512 KB SRAM, a 200 MHz MIPS Warrior M-class core with FPU, High-Speed USB 2.0 (HS USB), 10/100 Ethernet MAC, dual CAN 2.0b controllers, Audio (I2S) and Graphics (LCD/PMC) interfaces, advanced analog with up to 48 analog inputs via 12-bit 18 MSPS ADC, and a Peripheral Pin Select (PPS) remappable I/O system. The 144-pin TQFP footprint offers roughly 120 usable GPIO lines and ample supply pins for noise-immune mixed-signal layouts. Architecturally, the EF family uses a 5-stage pipeline with hardware multiply-accumulate, dual-bank Flash with Live-Update on selected variants (not the E/PH), a dedicated DMA controller with eight channels, and a 128-bit Flash-wide prefetch bus that lets the core fetch two 32-bit instructions per cycle. Compared to the earlier PIC32MX 80 MHz parts, the EF family delivers roughly 6-8x the core DMIPS and adds FPU + DSP instructions critical for sensor fusion and motor-control loops. Typical applications for PIC32MZ1024EFH144-E/PH are Industrial HMI panels with TFT LCDs, IoT edge gateways with Ethernet + USB, audio processing systems with I2S codecs, motor-control inverter boards running FOC algorithms on three-phase BLDC/PMSM motors, and graphics terminals with resistive/capacitive touch. Design tip: the E/PH part requires a 12 MHz or 24 MHz primary crystal and a 32.768 kHz secondary crystal for the RTCC; USB applications need a 48 MHz PLL lock to be established before VBUS is applied to comply with USB 2.0 specifications. Use the MPLAB Harmony 3 framework for peripheral driver development. This page synthesizes distributor stock, drop-in same-brand alternatives from the PIC32MZ EF family, and PCB-layout design notes not collected in any single Microchip datasheet.

USD $11.20 有现货

PIC32MZ1024EFH144-E/PL

PIC32MZ1024EFH144-E/PL - 180MHz 32-Bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFH144-E/PL is a high-performance 32-bit MIPS32 M-Class microcontroller running up to 180 MHz with 1 MB of Flash program memory and 512 KB of SRAM, housed in a 144-pin LQFP (PL) package measuring 20x20 mm. Part of the PIC32MZ EF Embedded Connectivity with Floating Point Unit family, this MCU delivers up to 330 DMIPS, an IEEE 754-compliant FPU, and four 64-bit accumulators with single-cycle MAC, saturating, and fractional DSP math. What is a PIC32MZ EF microcontroller? It is a 32-bit MIPS Warrior M-class MCU family from Microchip that integrates an FPU, large SRAM (up to 512 KB), dual-panel Flash (up to 2 MB) with Live Update support, and connectivity peripherals such as HS USB, Ethernet MAC, CAN-FD, and multiple I2C/SPI/UART channels. The EF series sits in the PIC32 hierarchy of 32-bit microcontrollers -> MIPS-based MCUs -> Microchip MCU portfolio, designed for industrial, automotive, IoT, HMI/graphics, and motor-control applications where deterministic real-time control and rich connectivity are required. The PIC32MZ1024EFH144-E/PL integrates up to 12-bit ADC modules, comparators, multiple timers/capture/compare/PWM peripherals, and a graphics-friendly parallel master port for HMI displays. Its I/O count and the 144-LQFP footprint make it ideal for designs that need many peripherals brought out without going to a BGA, while the 1 MB Flash / 512 KB SRAM combination supports larger protocol stacks such as TCP/IP, USB host, and graphics libraries. Architecturally, the part features a 5-stage MIPS pipeline with DSP extensions, dual Flash panels for Live Update firmware (zero-downtime field upgrades), and a tightly-coupled SRAM with prefetch for deterministic interrupt latency. Compared with Cortex-M4F parts in the same MHz class, the EF family offers larger SRAM on-chip and integrated Ethernet MAC, reducing external component count. Typical applications include industrial automation controllers, automotive gateways, IoT edge nodes with Ethernet, HMI panels with TFT displays, and motor-control drive boards. Its wide operating temperature range and AEC-Q100-qualified sibling (PIC32MZ1024EFH144-I variant) make it suitable for harsh-environment deployments. When designing with the PIC32MZ1024EFH144-E/PL, ensure all AVDD/VDD pin pairs have proper decoupling (100 nF + bulk), observe the supply sequencing rules for analog and core rails, and use MPLAB Harmony 3 for peripheral and connectivity stacks. Programming/debug is supported through ICSP (PGECx/PGEDx pairs) and JTAG.

USD $9.18 有现货

PIC32MZ1024EFH144-I/JWX

PIC32MZ1024EFH144-I/JWX - 200MHz 32-Bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFH144-I/JWX is a 32-bit MIPS32 M-Class microcontroller running at 200 MHz with 1 MB of Flash and 512 KB of SRAM, housed in a 144-ball TFBGA (7x7 mm) package. It integrates an IEEE 754-compliant floating-point unit, a 200 MHz DSP-enhanced core delivering 330 DMIPS, and a rich peripheral set including HS USB, 10/100 Ethernet MAC, CAN, and graphics/audio interfaces. A microcontroller (MCU) is a self-contained computer on a single chip that combines a processor core, program memory (Flash), data memory (SRAM), and configurable peripherals. Within the semiconductor taxonomy, the PIC32MZ1024EFH144-I/JWX sits in the hierarchy of 32-bit MCU -> microcontroller -> embedded processor -> integrated circuit. The PIC32MZ EF family targets connectivity applications in industrial control, automotive, IoT, graphics/HMI, and motor control market segments. Key features include 1 MB Live-Update Flash, 512 KB SRAM, a 200 MHz core with four 64-bit accumulators for single-cycle MAC and saturating/fractional math, and an IEEE 754-compliant FPU. The device provides 144 pins of I/O flexibility, multiple UART/SPI/I2C channels, and dedicated audio and graphics interfaces for HMI designs. The PIC32MZ EF architecture pairs the MIPS Warrior M-class core with a high-throughput peripheral bus, enabling deterministic real-time response while the FPU offloads floating-point math from the integer pipeline. The 144-TFBGA (7x7) package offers a compact footprint for space-constrained boards while exposing the full pin count needed for complex connectivity designs. Typical applications include industrial automation controllers, IoT gateways with Ethernet and USB connectivity, motor control drives, and graphics/HMI panels. The combination of 200 MHz performance, 1 MB Flash, and integrated Ethernet/CAN/USB makes it suitable for networked embedded systems requiring both compute headroom and rich connectivity. When designing with this device, pay close attention to the multiple VDD/VSS pin pairs and the ICSP programming pin pairing rules - PGECx and PGEDx must be used as matched pairs. Decouple every supply pin with a local 0.1 uF capacitor and provide a bulk 10 uF capacitor near the package. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, replacement, and layout decisions.

USD $8.61 有现货

PIC32MZ1024EFH144-I/PH

PIC32MZ1024EFH144-I/PH - 200MHz 32-bit MCU 1MB Flash TQFP-144 | Microchip

The Microchip Technology PIC32MZ1024EFH144-I/PH is a high-performance 32-bit MIPS M-Class microcontroller built around a MIPS32 Warrior M-class core running up to 200 MHz (252 MHz according to Microchip marketing collateral) with a single-cycle hardware MAC, four 64-bit accumulators, IEEE 754-compliant single/double-precision floating-point unit, and DSP extensions delivering up to 330 DMIPS. The PIC32MZ1024EFH144-I/PH integrates 1 MB of Flash program memory and 512 KB (some web sources cite 524 KB total SRAM) of on-chip SRAM in a 144-pin TQFP package with 16x16 mm body. Industrial-grade (-40C to +85C) operation is indicated by the I temperature suffix; the /PH suffix denotes the 144-pin TQFP package. What is a PIC32 microcontroller? The PIC32 family is Microchip's lineup of 32-bit MIPS-based microcontrollers targeting applications where 8-bit PIC and 16-bit dsPIC architectures cannot deliver sufficient throughput. Within the PIC32 taxonomy, PIC32 sits at the top of Microchip's 32-bit hierarchy, and the EF (Embedded Connectivity with FPU) sub-family targets connected industrial, automotive, IoT, graphics/HMI, and motor-control applications by combining FPU math with high-throughput peripherals. Key features of the PIC32MZ EF family include a 200 MHz MIPS Warrior M-class core with IEEE 754-compliant FPU, 1 MB Live-Update Flash, 512 KB SRAM, Hi-Speed USB 2.0 with PHY, 10/100 Ethernet MAC, CAN, up to 12-bit 5 MSPS ADC, and graphics/audio interfaces. According to Microchip datasheet DS80000663, the device also integrates crypto accelerators, SQI, EBI for external memory expansion, and multiple I2S/SPIs suitable for graphics HMI panels. The PIC32MZ1024EFH144 uses a 5-stage pipeline with branch prediction and a tightly-coupled prefetch buffer to sustain 1.65 DMIPS/MHz, plus DSP-enhanced arithmetic for single-cycle MAC with saturating and fractional math. The integrated FPU eliminates soft-float penalties in motor control loops, while the HS USB PHY and Ethernet MAC enable connected-device designs without external companion chips. Typical applications include industrial HMI with TFT LCD graphics, IoT gateways with Ethernet and HS USB, automotive infotainment and body controllers, motor control drives with FPU-accelerated field-oriented control, and high-performance consumer graphics/audio products. The 144-pin TQFP footprint offers abundant I/O for parallel display and motor-control channels. When designing with the PIC32MZ1024EFH144-I/PH, ensure all VDD/VSS pairs are decoupled with 100 nF ceramic capacitors placed as close as possible to the package, and follow Microchip's recommended external ICSP programming pin pair (PGECx/PGEDx) layout. The wide range of peripherals means careful pin multiplexing planning in MPLAB Harmony is essential to avoid conflicts. This page synthesizes distributor pricing, drop-in same-package alternatives (PIC32MZ EF variants in 144-TQFP, with site MPN candidates preferred), and practical design notes not assembled in the manufacturer datasheet alone.

USD $11.92 有现货

PIC32MZ1024EFH144-I/PL

PIC32MZ1024EFH144-I/PL - 200MHz 1MB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ1024EFH144-I/PL is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, featuring a MIPS Warrior M-class core running up to 200 MHz with 330 DMIPS performance, 1 MB Flash and 512 KB SRAM, housed in a 144-pin LQFP package (20x20 mm). The part integrates an FPU, DSP enhancements with four 64-bit accumulators and single-cycle MAC operations, plus IEEE 754-compliant floating point. The /PL suffix designates the 144-pin LQFP industrial-temperature variant. What is a PIC32MZ microcontroller? A PIC32MZ is a high-performance MIPS-based 32-bit microcontroller from Microchip Technology, positioned above the PIC24 and dsPIC families in the product hierarchy: PIC32MZ -> PIC32 -> 32-bit MCU -> microcontroller -> embedded semiconductor. The 'EF' subfamily denotes 'Embedded Connectivity with Floating Point Unit' and is designed for industrial, automotive, IoT, graphics (HMI), and motor-control market segments where high compute density and rich peripherals are required. Key features include 200 MHz/330 DMIPS performance, up to 2 MB Live-Update Flash and 512 KB SRAM, high-speed USB 2.0 (HS USB), 10/100 Ethernet MAC, dual CAN modules, an SQI (Serial Quad Interface) for high-speed external Flash/PSRAM, a 12-bit 40 MSPS ADC, and a graphics-friendly PMP/EBI interface. The device includes 144 GPIO and runs from 2.3V to 3.6V core/IO supply, with industrial temperature grade -40C to +85C per the -I suffix. The architecture combines a deterministic interrupt controller, MMU for full operating-system support (Linux/RTOS), DSP extensions with saturating and fractional math, dedicated crypto engines, and an audio DAC interface with I2S. The wide peripheral mix eliminates the need for companion chips in connected embedded designs, reducing BOM cost and PCB area compared with multi-IC solutions built around lesser MCUs. Typical applications include industrial Ethernet-connected controllers, IoT gateways, HMI/touchscreen control panels, automotive infotainment nodes, motor-control servo drives, and audio processing systems. The device is well-suited to graphics displays thanks to integrated LCD/PMP interfaces and ample SRAM for frame buffers. When designing with this MCU, allocate sufficient decoupling (100 nF + 4.7 uF per VDD/VSS pair), route the 50 MHz Ethernet reference clock with controlled impedance, and use the SQI bus to attach PSRAM for large graphics buffers. Use MPLAB Harmony 3 configuration for peripheral setup and FreeRTOS for scheduling.

USD $9.10 有现货

PIC32MZ1024EFH144T-E/JWX

PIC32MZ1024EFH144T-E/JWX - 1MB Flash 180MHz MCU 144-TFBGA | Microchip

The Microchip Technology PIC32MZ1024EFH144T-E/JWX is a 32-bit MIPS32 M-Class PIC32MZ microcontroller running up to 180 MHz, integrating 1 MB of Flash program memory and 512 KB of SRAM in a 144-pin TFBGA (7x7 mm) surface-mount package. It is part of the PIC32MZ EF Family, which targets connectivity, industrial, automotive, IoT, HMI graphics, and motor-control applications, with 1 MB Flash and 512 KB RAM, no on-chip crypto, and an integrated CAN interface. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance processor core, program and data memory, and a rich peripheral set on one silicon die. Within the system hierarchy, the PIC32MZ EF family sits between the 8/16-bit PIC16/PIC24 lines and the higher-end Cortex-M7 parts, providing deterministic interrupt response, large contiguous memory, and a Floating Point Unit for DSP-class math. The E/JWX suffix denotes the 144-pin TFBGA package, the extended (-40C to +125C) temperature grade, and tape-and-reel packaging. Key features include an integrated FPU, 1 MB Flash, 512 KB SRAM, 8 DMA channels, 9 timers, 2 watchdog timers, and 2 analog comparators, along with HS USB, Ethernet, audio I2S, graphics LCD controller, and a 12-bit ADC. Communication interfaces include CAN, 5x I2C, 3x SCI/UART (LIN-capable), and SPI. The DSP-enhanced MIPS core delivers 252 DMIPS and supports SIMD instructions for audio and motor-control signal chains. Architecturally, the device combines a 5-stage MIPS32 M-Class pipeline with a tightly-coupled FPU, dedicated crypto-free secure boot path, and a peripheral bus matrix that allows simultaneous DMA, Ethernet, and USB traffic without CPU intervention. The 144-TFBGA package uses a 0.5 mm pitch and a 7x7 mm body, suitable for compact multilayer PCB designs. Typical applications include industrial automation controllers, automotive body and HMI modules, IoT gateways, graphics touch-panel HMIs, and high-performance BLDC/PMSM motor control. The combination of Ethernet, CAN, and USB simplifies connected-motor and connected-sensor node designs. When designing with this part, allocate the TFBGA fan-out using micro-vias and ensure the core supply (2.1V-3.3V) is decoupled with 100 nF + bulk ceramic per the Microchip PIC32MZ EF Family datasheet guidelines. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the PIC32MZ1024EFH144T-E/JWX, providing context beyond the manufacturer datasheet for engineers selecting a 32-bit MCU for connected embedded designs.

USD $9.62 有现货

PIC32MZ1024EFH144T-I/PH

PIC32MZ1024EFH144T-I/PH - 32-bit MCU 200MHz 1MB Flash TQFP-144

The Microchip Technology PIC32MZ1024EFH144T-I/PH is a high-performance 32-bit MIPS M-Class microcontroller running up to 200 MHz, integrating 1 MB of Flash and 512 KB of SRAM in a 144-pin TQFP (16x16 mm) package. It belongs to the PIC32MZ EF family, which combines a MIPS32 M-class core with FPU, dedicated audio and graphics peripherals, Hi-Speed USB, Ethernet MAC, and advanced analog blocks targeting connectivity-rich applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (timers, communication interfaces, ADCs, GPIO) into one IC. Within the embedded hierarchy, the PIC32MZ EF family sits at the top of the PIC32 product tree: 32-bit MCU -> MIPS M-class core -> PIC32MZ EF sub-family. This family is positioned above 16-bit PIC24/dsPIC families and below 64-bit Cortex-A application processors, targeting industrial, IoT, automotive, graphics HMI, and motor-control segments. Key features include a 200 MHz core (252 MHz maximum in the EF family), 1 MB Flash, 512 KB SRAM, 120 GPIO lines, hardware FPU, Hi-Speed USB 2.0 OTG, 10/100 Ethernet MAC, multiple CAN, I2C, SPI, and UART ports. The ICSP programming interface enables in-circuit debug across multiple PGECx/PGEDx pin pairs, simplifying board layout. Wide supply voltage (2.1V to 3.3V) and industrial temperature range (-40C to +85C) support harsh-environment deployments. The PIC32MZ1024EFH144T-I/PH uses the proven MIPS microAptiv core with a 5-stage pipeline, dual-issue superscalar execution, and tightly-coupled FPU for DSP-class arithmetic. The 200 MHz speed grade (vs the 252 MHz -250 variant) trades peak performance for lower active current, making it attractive when headroom matters more than raw MHz. Integrated peripherals include 8 DMA channels, 9 timers, a 12-bit 18 MSPS ADC, and dedicated I2S audio interfaces. Typical applications include industrial IoT gateways, automotive HMI clusters, graphics touch-panel controllers, motor-control FOC drives, and connected medical instrumentation. The 120 GPIO count accommodates large parallel-display and keypad matrices without external bus expanders. Design tip: route ICSP traces symmetrically to avoid stubs, decouple each VDD/VSS pair with 100 nF X7R close to the pin, and reserve boot-loader GPIO for in-field firmware updates. This page synthesizes drop-in alternatives, distributor pricing tiers, and practical design notes not found in the standalone datasheet - including same-pin PIC32MZ EF family siblings and cross-family references for designers evaluating memory/peripheral trade-offs.

USD $10.51 有现货

产品（18688)