微控制器

产品（18688)

PIC32MZ1024EFF124T-I/TL - 200MHz 1MB Flash FPU MCU | Microchip
PIC32MZ1024EFF124T-I/TL

PIC32MZ1024EFF124T-I/TL - 200MHz 1MB Flash FPU MCU | Microchip

The Microchip Technology PIC32MZ1024EFF124T-I/TL is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, running up to 200 MHz with 330 DMIPS and an integrated IEEE 754 floating-point unit. It integrates 1 MB of dual-panel Flash and 256 KB of SRAM in a 124-pin VTLA (9x9 mm) package with exposed pad. The part is tape-and-reel packaged and operates across the industrial -40C to +85C temperature range. A 32-bit MCU is a microcontroller whose central processing unit has a 32-bit datapath, register file, and address bus, allowing it to process significantly more data per instruction and address more memory than 8-bit or 16-bit alternatives. Within that taxonomy, the PIC32MZ EF family sits in the high-performance connectivity tier - above the older PIC32MX and PIC32MZ EC families - combining DSP extensions, an FPU, Ethernet MAC, USB, CAN, and SQI for industrial HMI, IoT gateways, motor control, and graphics applications. Key features of the PIC32MZ1024EFF124T-I/TL include a MIPS Warrior M-class core with single-cycle MAC and saturating fractional math, four 64-bit accumulators, dual-panel Flash that supports live field updates without downtime, an integrated crypto engine, a 12-bit ADC at up to 18 Msps, and a wide peripheral set that covers Ethernet, USB-HS, CAN, SQI, and multiple UART/SPI/I2C instances. The dual-panel Flash enables firmware to swap between two banks so the application can boot into a known-good image even if a field update is interrupted. Typical applications include industrial automation controllers, IoT edge gateways with TLS acceleration, automotive infotainment HMI boards, motor-control FOC loops, and high-resolution graphics displays. Designers choose this part when they need deterministic real-time behavior combined with on-chip Ethernet and USB, all without an external memory bus. When laying out the board, give priority to a continuous ground pour under the exposed thermal pad of the VTLA package and keep the trace lengths to the 50 MHz Ethernet PHY short and impedance-controlled. Verify that your IDE toolchain is MPLAB X with XC32 compiler 2.50 or later so that the hardware FPU and DSP ASE are correctly enabled - older compiler builds silently disable the FPU and lose roughly 40% of the headline 330 DMIPS figure. This page synthesizes distributor pricing, drop-in tape-and-reel alternatives, and practical bring-up notes that are not assembled in the manufacturer datasheet alone.

USD $7.45 有现货
PIC32MZ1024EFF144-E/JWX - 32-Bit MCU 1MB Flash 180MHz TFBGA-144 | Microchip
PIC32MZ1024EFF144-E/JWX

PIC32MZ1024EFF144-E/JWX - 32-Bit MCU 1MB Flash 180MHz TFBGA-144 | Microchip

The Microchip Technology PIC32MZ1024EFF144-E/JWX is a 32-bit microcontroller built on the MIPS32 M-Class core, delivering 180 MHz operation with up to 200 MHz capability, packaged in a 144-lead Thin Fine-Pitch Ball Grid Array (TFBGA, 7x7 mm). The device integrates 1 MB of dual-panel Flash, 256 KB of SRAM, and a 32 KB instruction cache, positioning it as a high-performance MCU for connectivity, graphics, and motor-control applications. What is a PIC32MZ EF microcontroller? The PIC32MZ EF family is Microchip's flagship line of high-performance 32-bit microcontrollers based on the MIPS Warrior M-class architecture. These MCUs integrate a Floating Point Unit (FPU), Digital Signal Processing (DSP) extensions, and rich connectivity peripherals (HS USB, Ethernet, CAN, SQI) for embedded applications demanding real-time numeric performance combined with networking capability. Key features include a 32-bit MIPS32 M-class core with DSP extensions (four 64-bit accumulators, single-cycle MAC, saturating and fractional math), an IEEE 754-compliant FPU, dual-panel Flash for live firmware updates, and an integrated 12-bit ADC with up to 42 analog inputs. The MCU also offers HS USB 2.0 with integrated PHY, 10/100 Ethernet MAC, CAN 2.0b, multiple UART/SPI/I2C interfaces, and a Parallel Master Port for graphics displays. The PIC32MZ EF family targets industrial, automotive, IoT, graphics/HMI, and motor-control market segments. The 144-TFBGA package provides 144 I/O-capable pins for complex systems requiring extensive peripheral integration. The -E/JWX suffix indicates the -40C to +125C extended industrial temperature grade and the lead-free TFBGA-144 package. The "No Crypto" suffix signifies the absence of hardware cryptography acceleration, distinguishing it from the PIC32MZ EC family which includes crypto. Typical applications include industrial automation controllers, automotive body and HMI modules, IoT edge gateways with Ethernet connectivity, motor-control servo drives, and graphics display terminals. The 1 MB dual-panel Flash enables live firmware updates without downtime, while the FPU and DSP extensions accelerate sensor fusion and control-loop calculations. When designing with this part, allocate the 32 KB instruction cache to time-critical code paths and place the device's decoupling capacitors (100 nF + bulk) within 5 mm of each power pin. The TFBGA-144 package requires 4-layer or higher PCB stack-ups with microvia technology for reliable BGA soldering per IPC-7093 guidelines. This page synthesizes distributor pricing, same-brand drop-in alternatives, AEC-Q100 application guidance, and TFBGA-144 layout considerations that go beyond the manufacturer datasheet, helping engineers evaluate and integrate the PIC32MZ1024EFF144-E/JWX into next-generation connected embedded designs.

USD $12.18 有现货
PIC32MZ1024EFF144-E/PL - 200MHz 1MB Flash MCU 144-LQFP | Microchip
PIC32MZ1024EFF144-E/PL

PIC32MZ1024EFF144-E/PL - 200MHz 1MB Flash MCU 144-LQFP | Microchip

The Microchip Technology PIC32MZ1024EFF144-E/PL is a high-performance 32-bit microcontroller based on the MIPS Warrior M-Class core, delivering 200 MHz / 330 DMIPS performance with an integrated IEEE 754-compliant FPU and DSP-enhanced single-cycle MAC engine. The device integrates 1 MB of dual-panel Live-Update Flash and 256 KB of SRAM in a 144-pin LQFP package (20x20 mm). It is qualified for the extended -40C to +125C industrial temperature range. A 32-bit MCU is a microprocessor whose internal data path, registers, and ALU are 32 bits wide, enabling efficient handling of large integer and floating-point workloads. PIC32 microcontrollers belong to the MIPS architecture family and target embedded connectivity applications that demand deterministic real-time response combined with rich peripheral integration. The PIC32MZ EF family is positioned at the top of Microchip's PIC32 lineup, sitting between the lower-end PIC32MX devices and the higher-end SAME70 SAM Cortex-M7 family in performance, while retaining Microchip's MPLAB Harmony toolchain and peripheral library. Key features include HS USB 2.0 with integrated PHY, 10/100 Ethernet MAC with MII/RMII interface, two CAN 2.0B modules, multiple UART/SPI/I2C peripherals, a 12-bit 18 MSPS ADC, up to 16 channels of DMA, and an SQI (Serial Quad Interface) for high-speed external Flash. The 144-LQFP footprint exposes the maximum number of I/O and peripheral pins in this family variant. The dual-panel Live-Update Flash architecture allows firmware to be written to one panel while executing from the other, enabling fail-safe over-the-air (OTA) updates for connected industrial and IoT systems. Hardware crypto accelerators (when present in the EFF suffix variants) support AES, DES, SHA, and HMAC, while the EF (non-crypto) variants are pin-compatible and lower cost. Typical applications include industrial gateways with Ethernet and CAN, IoT edge nodes with secure cloud connectivity, automotive infotainment HMI controllers, motor control FOC drives, audio processing and graphics HMI panels, and point-of-sale terminals. The integrated FPU accelerates DSP workloads such as audio codecs, motor control loops, and FFT signal processing without offloading to a companion DSP. When designing with the PIC32MZ1024EFF144-E/PL, ensure the core supply uses a low-noise LDO and that VDDPLL/VBAT/VUSB decoupling follows the reference manual. Use MPLAB Harmony 3 configuration to avoid pin-mapping conflicts between the 144-LQFP, 100-TQFP, and 64-QFN variants of the same family. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet, enabling faster part selection and BOM risk reduction.

USD $9.30 有现货
PIC32MZ1024EFF144-I/PH - 200MHz 1MB Flash MCU 144-TQFP | Microchip
PIC32MZ1024EFF144-I/PH

PIC32MZ1024EFF144-I/PH - 200MHz 1MB Flash MCU 144-TQFP | Microchip

The Microchip Technology PIC32MZ1024EFF144-I/PH is a high-performance 32-bit MIPS MCU from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, housed in a 144-pin TQFP (16x16 mm) package. The device integrates a 200 MHz MIPS Warrior M-class core delivering 330 DMIPS, 1 MB of Flash program memory (1M x 8), and 256 KB of SRAM, with hardware FPU and DSP-enhanced instructions including four 64-bit accumulators, single-cycle MAC, saturating and fractional math, plus IEEE 754 compliance. What is a PIC32MZ EF microcontroller? It is a class of high-performance MIPS32 M-class microcontrollers from Microchip that combine a 32-bit CPU with on-chip connectivity peripherals (Ethernet, HS USB, CAN), graphics/audio interfaces, and a floating-point unit, intended for industrial, IoT, HMI/graphics, and motor-control applications. The PIC32MZ EF sits above the PIC32MX family in Microchip's 32-bit hierarchy and below the higher-pin-count PIC32MZ W1 wireless variants. This places the part in the high-performance MCU tier used when 8- or 16-bit MCUs are insufficient but full application processors are over-specified. Key features include dual-panel Flash for live firmware update, HS USB 2.0 host/device/OTG, 10/100 Ethernet MAC, dual CAN 2.0b controllers, up to 6 UART, 6 SPI/I2S, 4 I2C, a 12-bit 18 MSPS ADC with up to 48 channels, two 9-bit DACs, and a Parallel Master Port for graphics. The integrated crypto engine supports AES, 3DES, SHA, MD5, HMAC, and RNG. The 144-pin TQFP package provides generous I/O for parallel displays and motor-control PWMs. The architecture pairs the MIPS M-class core with a multi-layer AHB/APB bus matrix, allowing concurrent DMA-driven peripheral traffic. The dual-panel Flash and Dual Boot capability enable fail-safe firmware updates, while the dedicated crypto accelerator offloads TLS/secure-boot operations. Internal regulator and brown-out reset support a wide 2.3-3.6 V operating range. Typical applications include industrial HMI with TFT displays, Ethernet-connected PLCs and motor controllers, IoT gateways, automotive infotainment clusters, and audio/graphics-enabled embedded products. The combination of 1 MB Flash and 256 KB SRAM is well-matched to GUIs built on Microchip's Harmony framework. Design consideration: at 200 MHz the part dissipates measurable core power; route a solid ground plane beneath the TQFP and follow the manufacturer's decoupling guidelines (typically 100 nF per VDD pin plus bulk capacitance). Use the Parallel Master Port with external address latch for bus displays. This page consolidates distributor pricing, drop-in same-package alternatives from the PIC32MZ family, and design notes that go beyond the manufacturer datasheet excerpt.

USD $9.84 有现货
PIC32MZ1024EFF144-I/PL - 200MHz 1MB Flash MCU | Microchip
PIC32MZ1024EFF144-I/PL

PIC32MZ1024EFF144-I/PL - 200MHz 1MB Flash MCU | Microchip

The Microchip PIC32MZ1024EFF144-I/PL is a 32-bit MIPS32 M-Class microcontroller running up to 200 MHz with 1 MB Flash and 256 KB SRAM, housed in a 144-pin LQFP (20x20 mm) package. It belongs to the PIC32MZ EF family targeting connectivity applications including industrial, automotive, IoT, graphics/HMI, and motor control market segments. A 32-bit microcontroller (MCU) is an integrated processor that executes instructions over a 32-bit data path, typically featuring on-chip Flash, SRAM, and a rich set of peripherals. The PIC32MZ EF family sits in the high-performance tier of Microchip's 32-bit MCU portfolio (PIC32 -> 32-bit MCU -> microcontroller -> embedded IC -> semiconductor), integrating a MIPS Warrior M-class DSP-enhanced core with a single-cycle hardware Floating Point Unit (FPU) and four 64-bit accumulators for saturating and fractional math. Key differentiating features include dual-panel Flash for live-update firmware support (enabling field upgrades without downtime), 200 MHz / 330 DMIPS core performance, integrated HS USB, Ethernet MAC, CAN, SQI (Serial Quad Interface), and an 18-channel ADC. The integrated crypto engine (note the second 'F' in 'EFF' suffix) supports AES, DES, 3DES, SHA, MD5, and RNG primitives, differentiating this variant from non-crypto 'EFE' parts. The 144-pin LQFP exposes 5 UART, 6 SPI, 5 I2C, and dedicated high-speed communication peripherals. Architecturally, the device combines a Harvard-class memory bus with a tightly-coupled FPU to deliver single-cycle MAC operations - useful for audio codecs and motor control loops. The dual-panel Flash partitions memory so the application can run from one panel while the other is being reprogrammed, a critical capability for industrial and automotive systems requiring non-stop operation. Internal pull-ups, configurable open-drain I/O, and 5V-tolerant inputs simplify mixed-voltage interfacing. Typical applications include industrial Ethernet-connected PLCs, automotive infotainment and body controllers, IoT edge gateways with TLS acceleration, graphics HMI panels with TFT/LCD controllers, and motor-control inverters (BLDC, PMSM, FOC). The combination of high-performance core, ample memory, and integrated connectivity peripherals reduces system BOM by replacing external Ethernet and crypto co-processors. When designing with this device, place 0.1uF ceramic decoupling capacitors adjacent to every VDD/VSS pair and follow the recommended 4-layer PCB stack-up with a dedicated ground plane. Engineers migrating from PIC32MX parts must re-evaluate pinout remapping, peripheral library changes, and use MPLAB Harmony v3 for firmware development. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on individual distributor product pages.

USD $7.32 有现货
PIC32MZ1024EFF144T-E/JWX - 32-bit MIPS MCU 180MHz 1MB Flash 144-TFBGA
PIC32MZ1024EFF144T-E/JWX

PIC32MZ1024EFF144T-E/JWX - 32-bit MIPS MCU 180MHz 1MB Flash 144-TFBGA

The Microchip Technology PIC32MZ1024EFF144T-E/JWX is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, operating at up to 180 MHz with 1 MB Flash and 256 KB SRAM in a 144-ball TFBGA (7x7 mm) package. Designed for industrial, IoT, automotive, graphics/HMI, and motor control applications, the device integrates an FPU, DSP enhancements, and a rich peripheral set including HS USB, Ethernet, CAN, and multiple analog blocks. A 32-bit MIPS microcontroller (MCU) is a programmable embedded processor based on the MIPS instruction set architecture that executes 32-bit operations per clock cycle, enabling deterministic real-time control with significantly higher throughput than 8/16-bit MCUs. The PIC32MZ EF family sits in the high-performance tier of Microchip's MCU portfolio, positioned between the PIC32MX mainstream family and the PIC32MZ EF/WFI graphics-tier devices. Within the broader taxonomy: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor -> integrated circuit. Key features include up to 180 MHz core speed (200 MHz on the industrial-grade -I variant), 1 MB Flash program memory, 256 KB SRAM, 8 DMA channels, 120 general-purpose I/O lines, and an integrated Floating Point Unit and DSP. The -E temperature grade extends operation from -40C to +125C, suitable for automotive and harsh industrial environments. Security features include Flash OTP and a unique 128-bit device ID for anti-counterfeit provisioning. The 144-ball TFBGA package provides high pin density (0.5 mm pitch) for space-constrained designs while maintaining robust thermal and electrical performance. The architecture combines the MIPS M-Class core with tightly-coupled peripherals mapped to a multi-channel DMA engine, enabling deterministic interrupt response and offloading data movement from the CPU. On-chip peripherals include HS USB 2.0 (host/device/OTG), 10/100 Ethernet MAC with MII/RMII interfaces, two CAN 2.0b controllers, multiple UART/SPI/I2C, and an SQI interface for Quad-SPI Flash expansion. The advanced analog block delivers up to 48 MSPS 12-bit ADC, 2 analog comparators, and multiple DAC outputs. Typical applications include industrial automation controllers, automotive infotainment and cluster-I/O, IoT gateways, graphical HMI touch panels, BLDC and PMSM motor control, and connected medical devices. The wide temperature range and CAN interfaces make it particularly well-suited for in-vehicle networks and factory-floor PLC modules. Engineers pair it with companion parts such as external Ethernet PHYs, CAN transceivers, and TFT LCD drivers. Design considerations include proper decoupling of the four separate supply rails (VDD, AVDD, VBAT, and VDDIO), trace-length matching on the Ethernet MII/RMII bus, and careful PCB layout to manage BGA fanout on a 4-layer or higher stackup. The JTAG/SWD interface supports boundary-scan and in-field firmware updates via bootloader or OTA mechanisms. This page synthesizes real-time distributor pricing, drop-in alternative cross-references, and practical design notes not consolidated on the manufacturer product page, giving procurement and design engineers a single, decision-ready reference for the PIC32MZ1024EFF144T-E/JWX.

USD $9.12 有现货
PIC32MZ1024EFF144T-I/PH - 200MHz 32-bit MCU 1MB Flash | Microchip
PIC32MZ1024EFF144T-I/PH

PIC32MZ1024EFF144T-I/PH - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip PIC32MZ1024EFF144T-I/PH is a high-performance MIPS32 M-Class 32-bit microcontroller running up to 200 MHz with 1 MB of Flash program memory and 256 KB of SRAM, housed in a 144-pin TQFP (16x16 mm, 0.4 mm pitch) package. The 'T' suffix denotes tape-and-reel packaging and the 'I' grade indicates an industrial operating temperature range of -40C to +85C, while the 'PH' package code identifies the 144-pin TQFP land pattern. The PIC32MZ EF family integrates a floating-point unit, a high-speed USB 2.0 HS transceiver, dual Ethernet MACs, CAN 2.0b, SQI (Serial Quad Interface) flash expansion, and a 12-bit ADC with up to 120 analog input channels (via external muxes). Key features of the device include the MIPS32 microAptiv core with single-precision hardware FPU, 1 MB self-programmable Flash with live update support, 256 KB RAM plus 160 KB of additional boot/FMF/auxiliary memory, 200 MHz/252 MHz core performance targets (200 MHz part shown), and integrated HS USB, Ethernet, CAN, SQI, EBI, and six UART/I2C/SPI peripherals for industrial connectivity. A high-performance MCU is the central controller of an embedded system: it executes firmware, drives I/O peripherals, manages communication buses, and handles real-time processing. Within the broader taxonomy, the PIC32MZ EF belongs to the 32-bit microcontroller family, then the MIPS-based MCU class, then the high-performance connectivity MCU sub-segment targeting industrial, automotive, IoT, graphics (HMI), and motor-control applications. The EF family is engineered for designs that require simultaneous Ethernet, USB, CAN, and graphics workloads on a single die. The architecture pairs a 5-stage pipelined microAptiv MPU with a dedicated DSP engine, hardware multiply-accumulate, and an instruction cache with configurable write-back policy. Up to 144 GPIO pins and dedicated peripheral pin-select (PPS) remapping allow flexible PCB routing even in densely populated designs. Crypto accelerators (random number generator) and an integrated 12-bit 18 MSPS ADC simplify the BOM for secure motor-control and connected-sensor designs. Typical applications include industrial gateways and PLCs, automotive infotainment/cluster controllers, IoT edge nodes with Ethernet+CAN, HMI panels with integrated TFT driving, motor-control drives for FOC and PFC, and USB host/device peripherals in consumer electronics. The 252 MHz maximum and 1 MB Flash target connectivity stacks such as TCP/IP, USB, and lightweight RTOS or bare-metal frameworks. When designing with the PIC32MZ1024EFF144T-I/PH, designers should match the 0.4 mm pitch TQFP footprint with sufficient PCB thermal dissipation (typically a 4-layer board with thermal vias under the EP). Decoupling must include a 100 nF plus 4.7 uF combination on each VDD/VBAT/VBUS pin, and the SQI trace layout should be length-matched within 2 mm. The PPS feature requires careful peripheral mapping at compile time to avoid pin conflicts. This page synthesizes distributor pricing, drop-in alternatives, and design considerations not aggregated on a single manufacturer datasheet page, providing a faster procurement and design reference for engineering teams evaluating the PIC32MZ EF family.

USD $8.75 有现货
PIC32MZ1024EFF144T-I/PL - 200MHz 32-bit MCU, 1MB Flash | Microchip
PIC32MZ1024EFF144T-I/PL

PIC32MZ1024EFF144T-I/PL - 200MHz 32-bit MCU, 1MB Flash | Microchip

The Microchip PIC32MZ1024EFF144T-I/PL is a high-performance 32-bit MIPS32 M-Class microcontroller running up to 200MHz, integrating 1MB of Flash program memory and 256KB of SRAM in a 144-pin LQFP (20x20 mm) package. This PIC32MZ EF family device is built on a 32-bit RISC architecture with an integrated Floating Point Unit (FPU), delivering the computational throughput required for connectivity, graphics, and motor control applications. The part operates from a 2.5V/3.3V supply and is rated for the industrial -40C to +85C temperature range.

USD $8.88 有现货
PIC32MZ1024EFG064-E/MR - 180MHz 32-bit MCU 1MB Flash 64-QFN | Microchip
PIC32MZ1024EFG064-E/MR

PIC32MZ1024EFG064-E/MR - 180MHz 32-bit MCU 1MB Flash 64-QFN | Microchip

The Microchip Technology PIC32MZ1024EFG064-E/MR is a 32-bit MIPS32 M-Class microcontroller running up to 180 MHz with an integrated IEEE 754-compliant Floating Point Unit (FPU). It integrates 1 MB of Flash program memory and 512 KB of SRAM in a 64-pin QFN (9x9 mm) package, targeting high-performance connected embedded designs. A microcontroller, often abbreviated MCU, is a single-chip computer that combines a CPU core, program memory, working RAM, and a rich set of peripherals. The PIC32MZ EF family belongs to the broader MIPS32 architecture tree (MIPS Warrior M-class), itself a 32-bit RISC lineage descended from the original MIPS instruction set. Within Microchip's portfolio, the PIC32MZ EF sits between the lower-pin PIC32MX family and the higher-end PIC32MZ DA/W1 families, balancing connectivity (HS USB, Ethernet, CAN) with floating-point DSP performance for industrial, IoT, graphics HMI, and motor control markets. Key features include a 200 MHz / 330 DMIPS MIPS Warrior M-class core with DSP enhancements (four 64-bit accumulators, single-cycle MAC, saturating and fractional math), 1 MB Live-Update Flash, 512 KB SRAM, an FPU, plus on-chip peripherals such as HS USB, Ethernet MAC, multiple CAN, SQI, and a 12-bit ADC. The integrated FPU enables floating-point math without software emulation, accelerating complex control loops. Live-Update Flash allows firmware upgrades without service interruption, valuable for industrial and IoT deployments. The E/MR temperature grade extends the operating range to -40C to +125C, supporting harsh-environment designs. Designers should note the 180 MHz figure reflects the power-saved operating point, with the EF family data sheet indicating headroom up to 200 MHz depending on configuration. When laying out a board, allocate dedicated decoupling for the analog AVDD/AVSS rails, and follow Microchip's PIC32MZ EF hardware checklist for high-speed signal integrity. This page combines distributor pricing and stock data with practical design guidance not duplicated in the bare datasheet, helping engineers evaluate the part against same-package PIC32MZ EF alternatives for graphics, audio, and motor-control designs.

USD $9.42 有现货
PIC32MZ1024EFG064-I/MR - 200MHz 32-bit MCU 1MB Flash | Microchip
PIC32MZ1024EFG064-I/MR

PIC32MZ1024EFG064-I/MR - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFG064-I/MR is a high-performance 32-bit microcontroller built on the MIPS Warrior M-class core, running up to 200 MHz with 1 MB of Flash and 512 KB of SRAM, housed in a 64-pin QFN (MR) package measuring 9x9 mm. This device belongs to the PIC32MZ EF (Embedded Connectivity with Floating Point Unit) family and supports MIPS microAptiv/M-Class DSP extensions including four 64-bit accumulators, single-cycle MAC, and saturating and fractional math. What is a PIC32MZ EF microcontroller? The PIC32MZ EF family is a high-performance 32-bit Flash microcontroller family based on the MIPS32 microAptiv/M-Class core. It integrates a single-precision IEEE 754 Floating Point Unit (FPU), high-speed connectivity peripherals (HS USB, Ethernet, CAN), and advanced analog (12-bit ADC, comparators). Within the Microchip PIC32 portfolio hierarchy: PIC32MX (entry 32-bit) -> PIC32MM (low-power) -> PIC32MK (motor control / analog) -> PIC32MZ EC (connectivity, no FPU) -> PIC32MZ EF (connectivity + FPU). The PIC32MZ EF line targets industrial, IoT, graphics HMI, and motor-control segments. Key features of this specific -I/MR variant include the 64-pin QFN (MR) industrial-temperature package (-40C to +85C), 1 MB of program Flash, 512 KB of SRAM, integrated HS USB 2.0 PHY, 10/100 Ethernet MAC, dual I2S/SPI interfaces for audio, an integrated graphics controller driving TFT panels up to WVGA, 24 channels of 12-bit ADC at 1 Msps, six UART, four SPI, and four I2C peripherals. The MIPS M-class core with FPU delivers approximately 330 DMIPS and 1.56 DMIPS/MHz. Architecturally, the PIC32MZ EF combines separate instruction and data Flash banks enabling Live Update firmware field upgrades, a multi-port DMA engine with 8 independent channels for offloading data movement from the core, and a Peripheral Pin Select (PPS) system that remaps most digital peripherals to any GPIO. The 12-bit ADC includes dual Sample-and-Hold for simultaneous sampling, while the 6-bit comparator with 32-level voltage reference enables hardware motor-control loops without CPU intervention. Typical applications include industrial IoT gateways (Ethernet + TLS acceleration paths), TFT-based HMI panels with graphics and audio, motor-control BLDC/PMSM drives using FOC algorithms (motor-control firmware libraries included), automotive infotainment and telematics subsystems, and connected medical devices requiring FPU for DSP/filtering. The wide peripheral set allows a single chip to replace discrete MCU + Ethernet controller + USB-IF combinations. When designing with the PIC32MZ1024EFG064-I/MR, plan the PCB layout around the 9x9 mm QFN exposed pad for thermal dissipation and ground return. Use MPLAB Harmony 3 for driver/provisioning stacks; configure the PLL from the 24 MHz primary oscillator for stable operation at 200 MHz. Decoupling requires 100 nF plus 4.7 uF bulk per VDD pin per Microchip reference schematics, and the analog supply AVDD must be star-routed and decoupled separately from the digital VDD. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a single source for component evaluation and procurement decisions.

USD $7.99 有现货
PIC32MZ1024EFG064-I/PT - 200MHz 1MB Flash MCU | Microchip
PIC32MZ1024EFG064-I/PT

PIC32MZ1024EFG064-I/PT - 200MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024EFG064-I/PT is a 32-bit MIPS M-Class microcontroller running up to 200 MHz (330 DMIPS, 3.28 CoreMark/MHz) with 1 MB of dual-panel Live-Update Flash and 512 KB of SRAM, housed in a 64-pin TQFP (10x10 mm) package. This PIC32MZ EF family device integrates an IEEE 754 hardware Floating Point Unit (FPU), a DSP-enhanced core with four 64-bit accumulators and single-cycle MAC, plus high-speed connectivity including HS USB, Ethernet MAC, and CAN for embedded-connectivity designs. What is a 32-bit microcontroller with FPU? An MCU with an integrated Floating Point Unit executes single- and double-precision IEEE 754 math in hardware rather than software emulation, dramatically accelerating control loops and DSP workloads. PIC32MZ EF devices sit in the hierarchy MCU -> 32-bit MCU -> MIPS M-Class MCU -> PIC32 family -> PIC32MZ EF sub-family -> Power-Management-IC adjacency (companion PMIC parts). This category is the workhorse of industrial connectivity, HMI graphics, motor control, and IoT edge nodes. Key features include a 12-bit ADC with up to 24 analog channels, eight DMA channels for offloading the CPU, dedicated audio/graphics peripherals (I2S, PMP, EBI), and a Cryptographic Engine absence flag in this 'G' variant (no on-chip crypto). The integrated FPU plus 330 DMIPS throughput make floating-point PID, FFT, and audio processing viable without an external DSP coprocessor. Architecturally, the PIC32MZ1024EFG064 pairs the MIPS Warrior M-class core with dual-panel Flash that supports live update (one panel runs while the other is reprogrammed), enabling fail-safe firmware upgrades in the field. The 512 KB SRAM is large enough to hold full TCP/IP stacks plus TLS buffers, supporting connectivity stacks that would otherwise require external memory. Typical applications include industrial HMI panels with TFT LCD, motor-control FOC drives, IoT gateways with Ethernet, audio DSP front-ends, and secure-connected appliances. The wide peripheral mix also suits automotive body controllers and factory-automation slaves. When designing with this part, reserve sufficient PCB area for the 64-pin TQFP's 0.5 mm pitch and ensure the ICSP pair (PGECx/PGEDx) is accessible for in-circuit programming. Adequate decoupling (100 nF + bulk) near each VDD/VSS pair is mandatory at 200 MHz to keep EMI low. This page synthesizes distributor pricing, same-package alternatives, and practical design notes that complement the manufacturer datasheet rather than replace it.

USD $5.94 有现货
PIC32MZ1024EFG064T-I/MR - 200MHz 32-bit MCU 1MB Flash | Microchip
PIC32MZ1024EFG064T-I/MR

PIC32MZ1024EFG064T-I/MR - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFG064T-I/MR is a high-performance 32-bit MIPS Warrior M-class microcontroller running up to 200 MHz (252 MHz on the M-class core family), integrating 1 MB of Flash program memory and 512 KB of SRAM in a 64-pin 9x9 mm QFN package with an integrated Floating Point Unit. Designed around the MIPS32 M-Class core with DSP enhancements (four 64-bit accumulators, single-cycle MAC, IEEE 754 FPU), this MCU delivers up to 330 DMIPS throughput while integrating High-Speed USB, Ethernet MAC, SQI (Serial Quad Interface), and a rich set of analog and timer peripherals. A microcontroller (MCU) is an integrated processor, memory, and peripheral set on a single die used to embed real-time control and connectivity into electronic systems. Within the broader taxonomy, the PIC32MZ EF family sits as a high-tier 32-bit MCU family within Microchip's PIC32 portfolio, which itself belongs to the embedded controller / microprocessor segment of the semiconductor market, targeting industrial, automotive, IoT, HMI/graphics, and motor-control applications. EF denotes the Floating Point variant with Ethernet and FPU support. Key features of the PIC32MZ1024EFG064T-I/MR include 1 MB Flash (1M x 8), 512 KB SRAM, an integrated crypto engine family option (this No-Crypto variant), High-Speed USB 2.0 with PHY, 10/100 Ethernet MAC, SQI interface for external Flash, 46 programmable I/O lines, 8 DMA channels, 9 timers, 2 comparators, 2 watchdog timers, and an RTC. The 64-QFN (9x9) package provides low inductance power/ground and exposes a thermal pad for improved thermal performance. The 200 MHz core with single-cycle MAC and DSP-enhanced accumulators makes the device suitable for real-time signal processing, while the integrated FPU simplifies floating-point math for sensor fusion, motor control loops, and graphics rendering. Combined with Hi-Speed USB and Ethernet, the device can act as a host, device, or networked node without external bridges. Typical applications include industrial connectivity gateways, IoT edge nodes, HMI/graphics controllers, motor-control and BLDC drives, audio processing front-ends, and automotive infotainment subsystems where high throughput and integrated connectivity reduce BOM and PCB area. When designing with this MCU, pay attention to the 200 MHz power budget and provide a low-impedance 3.3 V supply with bulk and decoupling capacitance close to each VDD/VSS pair; the integrated PHY domains have separate supply pins that must be bypassed carefully. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design considerations sourced from Microchip's PIC32MZ EF datasheet and authorized distributors - data points not aggregated on a single distributor page.

USD $7.95 有现货
PIC32MZ1024EFG064T-I/PT - 32-bit 200MHz MCU, 1MB Flash | Microchip
PIC32MZ1024EFG064T-I/PT

PIC32MZ1024EFG064T-I/PT - 32-bit 200MHz MCU, 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFG064T-I/PT is a 32-bit MIPS Warrior M-class microcontroller running up to 200 MHz (252 MHz for the family) with 1 MB Flash and 512 KB SRAM, packaged in a 64-pin TQFP (10x10 mm). It targets connectivity-rich applications including industrial, automotive, IoT, HMI graphics, and motor control. A 32-bit MCU is a microcontroller that integrates a CPU core, program memory, data memory, and peripherals on a single silicon die. The PIC32MZ EF family sits within the broader hierarchy of microcontrollers -> 32-bit MCUs -> MIPS-based MCUs -> embedded connectivity MCUs, combining high computational throughput with hardware accelerators for DSP, FPU, and cryptography (in crypto variants). Key features include 200 MHz / 330 DMIPS core performance, IEEE 754-compliant single-precision FPU, four 64-bit accumulators for DSP with single-cycle MAC, and saturating/fractional math support. The device integrates HS USB, Ethernet MAC, CAN, SQI, and advanced analog peripherals. The 64-pin TQFP provides 53 general-purpose I/O pins for flexible system integration. Architecturally, the PIC32MZ EF uses a Harvard cache architecture with prefetch module and 16 KB instruction cache to sustain throughput at 200 MHz. The Live-Update Flash dual-bank feature enables field firmware upgrades without downtime, while the dedicated crypto engine (in crypto variants) accelerates AES, 3DES, SHA, and RNG operations. Typical applications include industrial IoT gateways with Ethernet connectivity, automotive body/HMI controllers, graphic HMI displays, motor control drives, and audio processing systems. The wide peripheral integration allows single-chip implementation of connected embedded products. When designing with this MCU, ensure proper decoupling (100 nF + bulk capacitor per VDD pin pair) and follow the 64-pin TQFP layout guidelines. The Live-Update Flash requires a firmware framework that handles dual-bank synchronization during OTA updates. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $7.74 有现货
PIC32MZ1024EFG100-250I/PT - 250MHz 32-bit MCU, 1MB Flash | Microchip
PIC32MZ1024EFG100-250I/PT

PIC32MZ1024EFG100-250I/PT - 250MHz 32-bit MCU, 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFG100-250I/PT is a high-performance 32-bit MIPS MCU running up to 250 MHz with 1 MB Flash and 512 KB SRAM, housed in a 100-pin TQFP (PT) package measuring 12x12 mm. This Industrial-temperature-grade variant is part of the PIC32MZ EF family targeting connectivity, graphics/HMI, motor control, and IoT applications with on-chip Floating Point Unit support and rich connectivity peripherals. What is a 32-bit microcontroller? A 32-bit MCU is an embedded processor with a 32-bit data path, integer ALU, and program word width, sitting in the hierarchy: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. 32-bit MCUs deliver higher throughput than 8/16-bit devices and typically integrate memory, analog, and communication peripherals in a single chip for embedded designs. Key features of the PIC32MZ1024EFG100-250I/PT include: a MIPS32 M-Class core with FPU delivering up to 252 MHz (250 MHz in this part), 1 MB (1M x 8) Flash program memory, 512 KB SRAM, and a dedicated 12-bit 18 MSPS ADC. The device includes Hi-Speed USB 2.0 OTG, dual CAN 2.0b controllers, multiple UART/SPI/I2C peripherals, an integrated crypto engine absent on this "G" (no-crypto) variant, and an enhanced PMP/graphics interface for HMI panels. Architecturally, the PIC32MZ EF family uses the MIPS M4K microAptiv core with 16 KB I-cache and 16 KB D-cache, a 7-stage pipeline, DSP extensions, and a single-precision FPU. The 250 MHz clock provides 3.28 CoreMark/MHz performance, ample for high-speed protocol stacks (TCP/IP, USB, CAN-FD) and real-time DSP processing. A 8-channel DMA controller offloads data movement between peripherals and memory, reducing CPU interrupt load. Typical applications include industrial control and IoT edge nodes, high-resolution graphics/HMI panels, motor control (BLDC, PMSM, servo), automotive infotainment subsystems, and USB-based embedded devices. The 100-pin TQFP package provides generous I/O for parallel buses, PMP graphics, and multi-channel motor drive feedback. When designing with this part, ensure decoupling per the family datasheet (typically 100 nF + 4.7 uF near each VDD pair), use the integrated FPU for DSP workloads, and leverage MPLAB Harmony 3 code generation for peripheral setup. Compared to lower-end PIC32MX parts at 80 MHz, the PIC32MZ EF delivers roughly 3x DMIPS for protocol-heavy designs. This page synthesizes distributor pricing, same-family drop-in alternatives (PIC32MZ1024EFE100T-I/PT, PIC32MZ1024ECG100-I/PT, PIC32MZ1024ECH100-I/PT), and practical design notes not found in the manufacturer datasheet.

USD $9.50 有现货
PIC32MZ1024EFG100-E/GJX - 200MHz 32-bit MCU 1MB Flash | Microchip
PIC32MZ1024EFG100-E/GJX

PIC32MZ1024EFG100-E/GJX - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFG100-E/GJX is a 32-bit MIPS Warrior M-class microcontroller featuring a 200 MHz core with 330 DMIPS performance, 1 MB of Flash program memory, and 512 KB of SRAM, packaged in a 100-pin TFBGA (7x7 mm) form factor. It belongs to the PIC32MZ EF family, which combines high computational throughput, an integrated Floating Point Unit (FPU), and DSP extensions to address graphics/HMI, motor control, connectivity, and general-purpose embedded applications. A 32-bit microcontroller (MCU) is an integrated circuit containing a CPU, memory, and programmable peripherals on a single die, designed for embedded control tasks that exceed the capability of 8-bit or 16-bit microcontrollers. Within the broader taxonomy, a 32-bit MCU falls under microcontroller -> embedded processor -> integrated circuit. The PIC32MZ EF family leverages a MIPS Warrior M-class core (a RISC architecture) with hardware multiply-accumulate, four 64-bit accumulators, and a single-precision FPU, enabling double-precision math and IEEE 754 compliance for scientific and signal-processing workloads. Key differentiating specifications include a 12-bit, 18 MSPS, 40-channel ADC module with up to 6 dedicated comparators, a Memory Management Unit (MMU) supporting embedded operating systems such as FreeRTOS and Micrium OS, and Dual Panel Flash for live firmware updates without downtime. Communication peripherals include multiple UART, SPI, I2C, I2S, USB, and CAN interfaces, plus a 10/100 Ethernet MAC for networked industrial applications. The device integrates a hardware crypto accelerator variant family, although the -EFG100 suffix denotes the standard (non-crypto) configuration. The wide operating voltage range of 2.2 V to 3.6 V, automotive-grade temperature range (-40 °C to +125 °C indicated by the -E suffix), and AEC-Q100 qualification make it suitable for both industrial and automotive environments. Pin-compatible variants within the PIC32MZ EF family allow designers to scale from 64-pin to 144-pin packages with minimal code changes. Typical applications include industrial automation controllers, automotive body and gateway ECUs, graphical HMI terminals with TFT LCD support, IoT edge nodes with Ethernet connectivity, and motor control drives for BLDC and stepper systems. The MMU and DSP extensions also position this MCU well for audio processing and predictive maintenance nodes. When designing with this device, prioritize a 4-layer PCB with a continuous ground plane to manage 200 MHz edge rates, place decoupling capacitors within 3 mm of each VDD/VSS pair, and use MPLAB Harmony v3 for peripheral configuration to avoid register-level conflicts. Verify trace lengths for SDRAM and Ethernet signals against the IBIS models provided in the device family reference manual. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing engineers with a single reference for sourcing and integration decisions.

USD $9.98 有现货
PIC32MZ1024EFG100-E/PF - 32-Bit MCU 1MB Flash 252MHz TQFP-100 | Microchip
PIC32MZ1024EFG100-E/PF

PIC32MZ1024EFG100-E/PF - 32-Bit MCU 1MB Flash 252MHz TQFP-100 | Microchip

The Microchip Technology PIC32MZ1024EFG100-E/PF is a 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF (Embedded Connectivity with Floating Point Unit) family, offering 1 MB of Flash, 512 KB of SRAM, and a maximum core speed of 252 MHz (200 MHz / 330 DMIPS), housed in a 100-pin TQFP (12x12 mm) package. It integrates an IEEE 754-compliant single-precision FPU, four 64-bit accumulators, single-cycle MAC with saturating and fractional math, and a DSP-enhanced core for high-throughput signal processing. The -E suffix indicates an extended operating temperature range of -40C to +125C, while /PF denotes the TQFP-100 package without lead-free finish designation that the -I/PT commercial variant carries. What is a PIC32 microcontroller? PIC32 is Microchip's family of 32-bit MIPS-based microcontrollers, positioned between 16-bit PIC24/dsPIC parts and higher-end ARM Cortex-M devices. The PIC32MZ EF sub-family specifically targets connectivity-rich applications requiring on-chip Ethernet, USB, CAN, and high-performance analog, making it part of the broader MCU > 32-bit MCU > connected MCU taxonomy. The 'EF' designation signals the FPU-equipped, connectivity-rich tier; 'G' indicates the specific pinout/memory sub-line within the 100-pin variant. Key differentiating features include 1 MB dual-panel Flash supporting live firmware updates without downtime, hardware crypto acceleration on select derivatives (this part is the non-Crypto variant), 12-bit 200 Msps ADC, and a High-Speed USB 2.0 PHY with integrated transceiver. The device provides up to 78 GPIO, multiple I2C/SPI/UART interfaces, SQI (Serial Quad Interface) for external flash, and a 10/100 Ethernet MAC with MII/RMII interfaces - connectivity that is rare at this price/performance tier. Architecturally, the PIC32MZ EF uses the MIPS Warrior M-class core running from a 12 MHz internal FRC or external crystal, with PLL providing the 200-252 MHz system clock. The dual-panel Flash architecture allows the active panel to run code while the inactive panel receives an OTA image, a critical feature for industrial and IoT devices that cannot tolerate firmware-update downtime. Peripherals are connected via a multi-layer AHB/APB matrix with 9 DMA channels for offloading CPU-intensive data moves. Typical applications include industrial IoT gateways requiring Ethernet and TLS, automotive infotainment/HMI subsystems, USB host/device peripherals, motor control FOC drives, and graphics HMI with external display controllers. The extended temperature grade (-E) suits industrial and automotive under-hood environments where commercial-grade parts are unreliable. The FPU accelerates control-loop math in motor drives and audio DSP, while the high-speed ADC captures current and voltage feedback without external analog front ends. When designing with this MCU, prioritize the dual-panel Flash feature in your bootloader to enable fail-safe OTA updates, and use the integrated Ethernet MAC with an external PHY (such as Microchip's KSZ8081) for deterministic industrial networking. Decoupling requires 100 nF + 10 uF near each VDDIOSC/VDD pair, and the 12 MHz crystal load capacitance must match the crystal's specification to maintain USB-IF compliance. This page synthesizes distributor pricing, drop-in PIC32MZ EF alternatives (same-family variants), and PCB/thermal design notes that complement the official Microchip datasheet DS60001320H.

USD $10.18 有现货
PIC32MZ1024EFG100-I/GJX - 200MHz 32-bit MCU, 1MB Flash | Microchip
PIC32MZ1024EFG100-I/GJX

PIC32MZ1024EFG100-I/GJX - 200MHz 32-bit MCU, 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFG100-I/GJX is a high-performance 32-bit MIPS32 M-Class microcontroller running up to 200 MHz, integrating 1 MB Flash and 512 KB SRAM in a 100-pin TFBGA (7x7 mm, 1.06 mm height) package. It belongs to the PIC32MZ EF family, which targets connectivity-rich applications across industrial, IoT, graphics/HMI, and motor control market segments. The device operates from a 3.3 V supply and integrates a floating-point unit (FPU), hardware crypto accelerator (varies by part variant - this 'G' variant ships without crypto and without CAN-FD), and a rich peripheral set including USB-HS, Ethernet MAC, SQI, and up to 14 channels of DMA. Industrial temperature range -40C to +85C is supported by the -I suffix. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one silicon die. Within the broader semiconductor hierarchy, an MCU belongs to the embedded processor category, which also includes DSPs, FPGAs with embedded cores, and microprocessors. The PIC32MZ EF family sits in the upper-performance tier of Microchip's PIC32 portfolio, distinguished from the PIC32MX series by an out-of-order superscalar CPU pipeline, higher clock rates, larger memory, and integrated connectivity peripherals such as 10/100 Ethernet and USB 2.0 High-Speed with embedded PHY. Key features of the PIC32MZ1024EFG100-I/GJX include 200 MHz core speed (252 MHz on the EF family in general; 200 MHz is the spec for this specific speed grade), 1 MB program Flash with live update capability, 512 KB SRAM, 4 KB of EEPROM emulation, hardware crypto engine (NOTE: the 'G' variant family name is shared; this specific GJX SKU does not include the crypto module - the EFG100 'G' suffix denotes 'no crypto, no CAN' per distributor descriptions, while EFG100 'E' suffix denotes crypto and CAN), 12-bit 18 Msps ADC up to 48 channels, and a 9-bit or 12-bit DAC. The 100-pin TFBGA package supports up to 78 user I/O pins with extensive peripheral multiplexing. The architecture combines a MIPS microAptiv core with a dedicated multi-port bus matrix, allowing concurrent CPU and DMA transfers to Flash, SRAM, and peripherals without bus contention. Prefetch cache and instruction cache minimize Flash wait-states at high clock rates. This design is particularly effective for graphical HMI stacks (where multiple frame buffers can stream via DMA while the CPU renders UI elements) and for networked IoT gateways that must run an RTOS plus TLS simultaneously. Typical applications include industrial control HMIs with TFT LCD, IoT edge gateways with Ethernet and USB-HS connectivity, motor-control FOC drives leveraging the 12-bit high-speed ADC and PWM, medical patient monitoring, automotive body and infotainment subsystems, and consumer audio products that benefit from the I2S and SQI interfaces. The wide operating temperature and large memory make it suitable for RTOS-based designs running TCP/IP stacks, USB device/host stacks, and graphical frameworks. When designing with this MCU, allocate adequate decoupling (100 nF + 4.7 uF per VDD/VBAT pin) and follow Microchip's recommended trace impedance for the Ethernet and USB differential pairs. Boot configuration straps (BOOT0/BOOT1) and the trace-disabled fuse map affect bootloader selection, and unused peripherals should be clock-gated via PMD registers to meet low-power budgets. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not consolidated on the manufacturer datasheet cover page.

USD $12.50 有现货
PIC32MZ1024EFG100-I/PT - 32-bit 200MHz MCU, 1MB Flash | Microchip
PIC32MZ1024EFG100-I/PT

PIC32MZ1024EFG100-I/PT - 32-bit 200MHz MCU, 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFG100-I/PT is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF (Embedded Connectivity with Floating Point Unit) family, running up to 200 MHz core frequency with 330 DMIPS / 3.28 CoreMark/MHz performance. It integrates 1 MB of dual-panel Flash, 256 KB SRAM (with up to 512 KB SRAM in EF-family variants), and a hardware floating-point unit, all packaged in a 100-pin TQFP (PT) measuring 12x12 mm. The device targets connectivity, industrial, IoT, graphics/HMI, and motor-control applications. A 32-bit MCU (microcontroller unit) is an integrated circuit containing a 32-bit processor core, program and data memory, plus a rich set of peripherals (ADC, timers, communication interfaces, GPIO). Within the broader taxonomy, the PIC32MZ EF sits above general-purpose MCUs and below application processors, sitting in the same category as ARM Cortex-M4/M7 devices but built around the MIPS M-Class core from Imagination. EF-family devices specifically add a hardware FPU, large SRAM, dual-panel Flash for live update, and high-speed connectivity peripherals including Ethernet, USB, CAN, and SQI for external Flash expansion. Key features include the MIPS32 M-Class core with FPU, 1 MB dual-panel live-update Flash, large SRAM, 12-bit ADC with up to 40 input channels, eight DMA channels, and a comprehensive set of connectivity peripherals: 10/100 Mbps MAC, USB 2.0 high-speed OTG, CAN 2.0B, multiple UART/SPI/I2C, and a dedicated SQI (Serial Quad Interface). The 100-pin TQFP provides 78 GPIO, 9 16-bit timers, and a parallel master port (PMP) for external memory/display expansion. Architecture highlights: dual-panel Flash supports live firmware updates without device reset, the MIPS M5150 core uses a 6-stage pipeline with branch prediction, hardware multiply/divide, and a single-precision IEEE 754 FPU. The system bus is matrixed to DMA and peripherals for low-latency data movement, suitable for graphics HMI and motor-control loop execution. Typical applications include industrial connectivity gateways with Ethernet, USB host/device bridging, and SQI-based external Flash; graphics/HMI touch panels using PMP to drive TFT displays; motor-control FOC systems using the high-resolution PWM and fast ADC; medical instrumentation requiring deterministic USB or Ethernet connectivity; and IoT edge nodes combining CAN, Ethernet, and Crypto acceleration (note this part is the no-Crypto variant). When designing with this part, plan the 100-pin TQFP PCB footprint carefully: 0.4 mm pitch with a 16x16 mm body requires 4-layer routing for full GPIO and analog reach. Place a 12 MHz primary crystal with appropriate guard rings and route the Ethernet MII/RMII signals as 50-ohm impedance-controlled pairs. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical 100-pin TQFP layout notes beyond what the manufacturer datasheet front-line offers.

USD $8.94 有现货
PIC32MZ1024EFG100T-250I/PT - 250MHz 32-bit MCU 1MB Flash | Microchip
PIC32MZ1024EFG100T-250I/PT

PIC32MZ1024EFG100T-250I/PT - 250MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFG100T-250I/PT is a high-performance 32-bit MIPS M-Class microcontroller running up to 250 MHz with 1 MB of Flash and 512 KB of SRAM in a 100-pin TQFP (12x12 mm) package, part of the PIC32MZ EF family without CAN and without Crypto. The PIC32MZ1024EFG100T-250I/PT integrates a Floating Point Unit, Audio & Graphics interfaces, Hi-Speed USB, Ethernet MAC, and advanced analog peripherals, making it a complete system-on-chip for connected embedded designs. A PIC32 microcontroller is a MIPS-based 32-bit MCU built around the M-Class core, which combines high clock rates (up to 250 MHz at the EF performance tier) with deterministic interrupt latency and a rich peripheral set. PIC32 parts sit at the upper end of Microchip's 8/16/32-bit portfolio, targeting applications that need more compute and memory than PIC16 or PIC24 devices can deliver, while remaining programmable with MPLAB X IDE and Harmony framework. Within the family taxonomy, PIC32MZ EF > PIC32MZ > PIC32MX > PIC32, and the EF suffix specifically denotes the high-performance Flash/SRAM tier. Key features of the PIC32MZ1024EFG100T-250I/PT include 1 MB Flash program memory, 512 KB SRAM, a hardware Floating Point Unit for DSP-style math, Hi-Speed USB 2.0 OTG, 10/100 Ethernet MAC with RMII/MII, up to 97 I/O pins shared across multiple 16-bit and 32-bit timers, a 12-bit ADC reaching 500 ksps, and dedicated audio/graphics peripherals (I2S, SQI for external graphics). The integrated FPU lets developers execute DSP and audio processing routines without software emulation. This device uses Microchip's PIC32MIPS32 M-Class core with 5-stage pipeline, dual-issue superscalar capability, and tightly-coupled peripherals, achieving 252 MHz in the -250 speed grade. With 1 MB Flash and 512 KB SRAM it can host networking stacks (TCP/IP, HTTP, MQTT) plus rich graphics simultaneously, while the 100-pin TQFP package offers a 0.4 mm pitch to balance routing density and ease of hand-rework. Typical applications include industrial IoT gateways, graphics HMI panels, motor control boards, audio processing units, and connected sensor hubs. The wide memory and rich peripheral mix also suit medical patient monitors, automotive infotainment prototypes, and home automation concentrators. When designing with the PIC32MZ1024EFG100T-250I/PT, allocate 8-16 KB of Flash for a robust bootloader and reserve the SQI interface for external QSPI memory if user-interface assets exceed internal storage. The -250I suffix denotes the industrial temperature range -40C to +85C, so verify thermal margins for enclosed industrial cabinets. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC32MZ EF family, and practical design notes beyond the manufacturer datasheet summary.

USD $6.45 有现货
PIC32MZ1024EFG100T-I/GJX - 200MHz 1MB Flash MCU 100-TFBGA | Microchip
PIC32MZ1024EFG100T-I/GJX

PIC32MZ1024EFG100T-I/GJX - 200MHz 1MB Flash MCU 100-TFBGA | Microchip

The Microchip PIC32MZ1024EFG100T-I/GJX is a 32-bit MIPS M-Class microcontroller from the PIC32MZ EF family running up to 200 MHz with 1 MB Flash, 512 KB SRAM, and integrated FPU, USB-HS, Ethernet and SQI interfaces. It is housed in a 100-pin TFBGA (7x7 mm) package with industrial -40C to +85C temperature rating. A 32-bit microcontroller (MCU) is a single-chip processor with integrated Flash program memory, SRAM data memory, and peripherals such as timers, ADC, communication controllers and GPIOs. PIC32MZ EF devices target high-performance connectivity applications - sitting in the hierarchy: microcontroller -> embedded MCU -> 32-bit MIPS MCU -> PIC32MZ EF family -> graphics/HMI, industrial, automotive and IoT segments. The PIC32MZ1024EFG100T-I/GJX carries 1 MB Flash (1024 KB, no crypto), 512 KB SRAM, and a peripheral set including Hi-Speed USB 2.0, 10/100 Ethernet MAC, SQI for external serial Flash, and a graphics-friendly 32-bit external bus. Key features include a 200 MHz MIPS32 M-Class core with 252 MHz maximum rated clock (per family datasheet), IEEE 754 single-precision FPU, 12-bit 18 MSPS ADC, and a Cryptographic Engine in the EF family (this part is the non-crypto variant). The 100-TFBGA (GJX) package is the compact 7x7 mm option for space-constrained designs, while a 100-TQFP (PF) variant exists for hand-solder prototypes. Typical applications include industrial Human-Machine Interface (HMI) panels, IoT gateways with Ethernet and USB-HS, automotive infotainment prototypes, and motor-control boards where the 200 MHz MIPS core and FPU accelerate FFT and DSP-style filtering. The integrated Ethernet MAC and Hi-Speed USB controller reduce BOM by eliminating external PHY companion chips on simpler designs. Design tip: at 200 MHz with 1.2V core, decoupling requires a 1uF + 100 nF pair within 5 mm of each VDD/VSS pair, and trace length matching for SDRAM if used. The non-crypto variant is intended for designs that do not need the on-chip Crypto Engine. This page synthesizes distributor pricing, same-brand drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $8.45 有现货
PIC32MZ1024EFG100T-I/PF - 200MHz 32-bit MCU, 1MB Flash | Microchip
PIC32MZ1024EFG100T-I/PF

PIC32MZ1024EFG100T-I/PF - 200MHz 32-bit MCU, 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFG100T-I/PF is a high-performance 32-bit MIPS32 M-Class microcontroller running up to 200 MHz with 1 MB of Flash and 512 KB of SRAM, housed in a 100-pin TQFP (14x14 mm) footprint with industrial-grade -40C to +85C temperature rating. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich peripheral set on one die. Within the broader taxonomy, it sits as: microcontroller -> embedded processor -> integrated circuit -> semiconductor. 32-bit MCUs deliver higher computational throughput, larger addressable memory, and richer peripheral integration than 8-bit or 16-bit predecessors, enabling embedded graphics, connectivity stacks, and DSP workloads in a single device. Key features of the PIC32MZ1024EFG100 include a MIPS32 M-Class core with DSP extensions and FPU, dual Flash panels for live updates, 8 KB of I-cache and 4 KB of D-cache, a 9-channel DMA controller, and a 12-bit 500 ksps ADC with up to 48 analog inputs. Communication peripherals include USB 2.0 High-Speed with PHY, 10/100 Mbps Ethernet MAC with IEEE 1588 PTP support, two CAN 2.0B controllers, six UART/SPI/I2C modules, and a 4-wire Serial Quad Interface (SQI) for external serial Flash expansion. Architecturally, the device uses a five-stage pipeline and tightly-coupled memory buses that allow sustained 1.84 DMIPS/MHz throughput. The integrated FPU accelerates single and double-precision IEEE 754 operations, making the part well suited for sensor fusion and control-loop math. Hardware crypto is not present on the EFG variant; the EFF family suffix indicates the FPU-enabled DSP-rich line without on-chip encryption accelerators. Typical applications include industrial IoT gateways, HMI/touchscreen controllers, motor control (BLDC/PMSM FOC), automotive infotainment prototypes, and graphics-rich embedded systems. The 100-TQFP package provides generous I/O for parallel displays and multi-bus connectivity. When designing with this part, allocate decoupling per the datasheet's power distribution diagram and use the SQI interface to expand non-volatile storage for file systems or OTA update staging. This page synthesizes distributor pricing, drop-in alternatives, and design notes not consolidated on the manufacturer product page, providing engineers a faster path to BOM validation.

USD $8.75 有现货
PIC32MZ1024EFG100T-I/PT - 32-Bit 200MHz MCU, 1MB Flash, 100-TQFP | Microchip
PIC32MZ1024EFG100T-I/PT

PIC32MZ1024EFG100T-I/PT - 32-Bit 200MHz MCU, 1MB Flash, 100-TQFP | Microchip

The Microchip Technology PIC32MZ1024EFG100T-I/PT is a high-performance 32-bit MIPS M-Class microcontroller with FPU running at up to 200 MHz, integrating 1 MB (1024 KB) of Flash and 512 KB of SRAM in a 100-pin TQFP (12x12 mm) package. It targets connectivity-rich applications spanning industrial, IoT, automotive, graphics/HMI, and motor-control segments within the PIC32MZ EF family. A 32-bit MCU is a microprocessor that executes 32-bit instructions per cycle, allowing single-cycle arithmetic on larger data words than 8- or 16-bit devices. The PIC32MZ EF family further integrates a Floating Point Unit (FPU) for hardware-accelerated single- and double-precision math, plus a MIPS32 M-Class core positioned between MCU and MPU in the embedded-computing hierarchy. This combination makes the EF family well suited to networked embedded products that need both deterministic control and high-throughput data processing. Key features include 200 MHz core speed with hardware FPU, 1 MB Flash / 512 KB SRAM, integrated USB-HS, Ethernet MAC, SQI (Serial Quad Interface), CAN, 12-bit ADC with up to 40 analog inputs, and 8 DMA channels for low-CPU-overhead data movement. The 100-TQFP package provides 78 user I/O pins, suitable for designs that need abundant GPIO plus multiple high-speed peripherals operating simultaneously. The PIC32MZ EF architecture uses a 5-stage pipeline, separate instruction and data caches, and a tightly-coupled DMA fabric, allowing deterministic peripheral response while sustaining high code density. The integrated crypto engine (not present on the -I/PT grade "No Crypto" variant) is bypassed on this part, simplifying firmware bring-up for non-secure applications while retaining full peripheral richness. Typical applications include industrial IoT gateways, Ethernet-connected HMI panels, USB peripherals and embedded graphics controllers, automotive body and infotainment subsystems, and digital motor-control platforms. The wide connectivity mix (USB-HS, Ethernet, CAN, SQI) makes it a strong fit for protocol-bridging designs that must marshal between fieldbus, Ethernet, and USB domains. When designing, allocate the dedicated analog and digital supply pins as specified in the datasheet, keep the 12-bit ADC reference traces short, and follow Microchip's recommended decoupling scheme. The T variant indicates tape-and-reel packaging; verify reel quantity (standard 1000/reel for TQFP-100) before quoting build-of-material. This page consolidates distributor pricing, drop-in PIC32MZ EF alternatives, and design notes drawn from the manufacturer datasheet - useful context beyond the data sheet itself.

USD $6.10 有现货
PIC32MZ1024EFG124-I/TL - 200MHz 32-bit MCU 1MB Flash 124-VTLA | Microchip
PIC32MZ1024EFG124-I/TL

PIC32MZ1024EFG124-I/TL - 200MHz 32-bit MCU 1MB Flash 124-VTLA | Microchip

The Microchip Technology PIC32MZ1024EFG124-I/TL is a 32-bit MIPS32 M-Class microcontroller running up to 200 MHz with 330 DMIPS performance, delivering 1 MB of Flash program memory and 512 KB of SRAM in a 124-pin VTLA (9x9 mm) surface-mount package. The device integrates a high-performance MIPS Warrior M-class core with a hardware Floating Point Unit (FPU), dual-panel Flash for live-update support, and four 64-bit accumulators with single-cycle MAC and IEEE 754-compliant single/double-precision math. The industrial-grade -I temperature variant supports operation from -40C to +85C, making it suitable for harsh environments. A 32-bit MCU (microcontroller unit) is a single-chip computer integrating a CPU core, memory, and programmable peripherals on one die. The PIC32MZ EF family sits in the high-performance tier of Microchip's 32-bit portfolio, bridging the gap between traditional 8/16-bit PIC microcontrollers and the more complex application processors, with deterministic real-time behavior, mature toolchains, and rich connectivity peripherals. Within the system hierarchy, it belongs to embedded controllers -> microcontrollers -> 32-bit microcontrollers -> MIPS architecture MCUs -> connectivity-focused MCUs. Key features include HS USB 2.0 with integrated PHY, 10/100 Mbps Ethernet MAC with RMII/MII interface, SQI (Serial Quad Interface) for high-speed external memory, and a 12-bit ADC at 500 ksps with up to 48 analog inputs. The device provides up to 97 programmable I/O lines, four I2C/SPI/UART peripherals, and dedicated DMA channels that offload data movement from the CPU, enabling deterministic real-time response in connected embedded systems. The PIC32MZ EF architecture combines DSP-enhanced instructions (single-cycle MAC, saturating arithmetic) with floating-point hardware acceleration, making it suitable for both control loops and signal-processing tasks. The dual-panel Flash enables in-field firmware updates without downtime, while the cryptographic accelerator (on the EFK variant) provides hardware AES/TDES/SHA support. The integrated High-Speed USB 2.0 PHY eliminates external transceiver chips, reducing BOM cost for connected device designs. Typical applications include industrial IoT gateways, HMI and graphics terminals, Ethernet-connected motor control, USB audio interfaces, automotive connectivity modules, and secure connected sensors. The combination of 1 MB Flash and rich peripherals also supports prototyping for industrial automation protocols (Modbus TCP, EtherCAT slave, PROFINET) and Bluetooth/WiFi co-processor designs. When designing with this part, allocate sufficient decoupling on each VDD/VSS pair (typically 100 nF + 4.7 uF), route the USB differential pair with 90-ohm impedance, and provide a stable 12 MHz crystal reference for the Ethernet PHY. The 124-VTLA package requires careful thermal pad soldering; follow Microchip's recommended reflow profile and PCB land pattern to ensure reliable assembly. This page synthesizes distributor pricing, drop-in alternatives drawn from the same PIC32MZ EF family, and practical design notes not found in the manufacturer datasheet, providing an engineer-ready single reference for selection and BOM management.

USD $9.80 有现货
PIC32MZ1024EFG144-E/PL - 200MHz 1MB Flash MCU | Microchip
PIC32MZ1024EFG144-E/PL

PIC32MZ1024EFG144-E/PL - 200MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024EFG144-E/PL is a high-performance 32-bit MIPS Warrior M-class microcontroller with FPU, integrating 1 MB of dual-panel Flash, 512 KB SRAM, and 160 KB boot Flash in a 144-pin LQFP (PL) 20x20 mm package. It runs up to 200 MHz (180 MHz core clock with peripheral bus at 100 MHz per device marking) targeting industrial, IoT, automotive and HMI/motor control designs. AEC-Q100 qualification is supported on the -E temperature grade (-40C to +125C). A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single die. Within the broader hierarchy, this PIC32MZ EF part belongs to the 32-bit MCU family (32-bit -> MCU -> microcontroller -> embedded processor -> semiconductor), superseding older 8/16-bit MCUs in applications that demand DSP extensions, single-cycle MAC, IEEE 754 floating point, and deterministic interrupt latency. Key features include an IEEE 754 FPU, four 64-bit accumulators, single-cycle MAC with saturating and fractional math, 12-bit 48-channel ADC, 12 DMA channels, Hi-Speed USB, Ethernet MAC, and hardware crypto/hash accelerator variants within the EF family. Dual-panel Flash enables live field updates without downtime. The 144-pin LQFP provides 120+ GPIO with multiple 5V-tolerant pins for mixed-voltage interfacing. Architecturally, the EF family uses the MIPS microAptiv core with DSP extensions and a tightly coupled FPU, achieving 330 DMIPS at 200 MHz. The dual-panel Flash is partitioned for seamless Live Update operation, while dedicated boot Flash (160 KB) supports secure firmware bootloaders. Peripherals are interconnected through a high-bandwidth bus matrix that lets the DMA engine move data between ADC, USB, Ethernet and SRAM without CPU intervention. Typical applications include industrial PLC controllers, automotive instrument clusters and HMI panels, IoT gateways with Ethernet, motor-control FOC drives, and graphics-enabled HMI terminals. Designers benefit from the Live Update capability for remote firmware deployment in deployed assets. When designing with this device, allocate sufficient decoupling (100 nF + 10 uF near each VDD pin pair), follow the 144-LQFP layout guideline with a continuous ground plane under the exposed pad route, and reserve the 5V-tolerant pins for legacy logic interfacing. Program flash endurance (1k minimum erase/write cycles per sector) should be considered for high-write applications. This page synthesizes distributor pricing, drop-in same-package alternatives, comparison tables, and practical design notes drawn from the PIC32MZ EF Family datasheet and reference designs, providing context that is not duplicated on any single source page.

USD $9.05 有现货