微控制器

R5F10WMGAFB#30

R5F10WMGAFB#30 - RL78/L13 16-bit MCU 128KB Flash | Renesas

The Renesas R5F10WMGAFB#30 is a 16-bit RL78/L13 microcontroller integrating 128 KB of code Flash, 8 KB of SRAM, and a built-in LCD controller/segment driver in an 80-pin LQFP package. It runs at up to 24 MHz from an internal oscillator and is targeted at low-power, battery-driven human-machine-interface applications such as home appliances and metering equipment. An RL78 microcontroller is a low-power 16-bit CISC core designed by NEC/Renesas as the successor to the 78K0 family. RL78 cores are tightly integrated with precision analog, LCD segment drivers, and multiple low-power operating modes. The RL78/L13 sub-family is the dedicated variant for applications with on-glass or on-board segment LCD displays, sitting within Renesas's broader RL78 product pyramid: RL78 core -> RL78/L1x (LCD) -> RL78/L13 (mid-density). This positioning makes the part a benchmark for years-of-battery-life white goods. Key features include three on-chip low-speed on-chip oscillators (15 kHz, 32 kHz, and the main 24 MHz high-speed on-chip oscillator), a 5-channel internal voltage booster for LCD bias, hardware multiplier/divider, 10-bit successive-approximation ADC, and a rich serial complement (CSI/SPI, UART, I2C, and LIN-bus). Power consumption is exceptionally low: approximately 0.6 µA in STOP retention mode with the LCD operating on a 32 kHz subclock and only ~3 mA active at 24 MHz. Architecturally, the RL78/L13 pairs a 3-stage pipeline CISC core with separated code/data buses (Harvard-style) and is built on a 130 nm mixed-signal process with embedded EEPROM/Flash. The integrated LCD controller supports up to 35 segment outputs x 4 common (or 39 x 8) configurations, configurable bias and frame frequency, and internal charge-pump or resistor-divider bias generation to allow operation from a single 1.8 V to 5.5 V supply. Typical applications include white-good HMI boards (washing-machine, microwave, induction-cooktop panels), residential gas/water/heat meters with display, blood-pressure and household medical displays, and remote-control units with battery charging indication. When designing with the R5F10WMGAFB#30, place the decoupling capacitors as close as possible to the VDD/VSS pins and reserve at least one full PCB layer for the LCD segment-trace routing. Selecting the correct bias source (internal resistor divider vs external capacitor divider) is critical - misconfiguring the charge pump on high-multiplex panels causes ghost segments. This page synthesizes distributor pricing, drop-in RL78/L13 alternatives, and PCB/HMI design notes drawn from the Renesas hardware manual and the verified web data - a combination not aggregated on any single distributor page.

USD $2.33 有现货

R5F10WMGAFB#50

R5F10WMGAFB#50 - 128KB Flash 24MHz RL78/L13 MCU 80-LQFP | Renesas

The Renesas Electronics R5F10WMGAFB#50 is a 16-bit RL78/L13 microcontroller with 128KB flash, 24MHz CPU, integrated segment LCD driver, and on-chip LCD voltage boost circuitry, housed in an 80-pin LQFP package (12x12 mm). It is part of the RL78 family designed for ultra-low-power embedded applications with built-in LCD control. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, peripherals, and I/O. The RL78 is a 16-bit RISC architecture developed by Renesas that emphasizes ultra-low active and standby current consumption, making it well-suited for battery-powered and energy-harvesting products. The L13 sub-family adds a segment LCD controller/driver with three voltage-generation methods (external resistor divider, capacitive split, internal voltage boost), allowing direct connection to a wide range of segment LCD panels without external charge-pump circuitry. Key features include 128KB flash (128K x 8), 8KB SRAM, 24MHz maximum CPU clock, an integrated segment LCD driver supporting up to many segments, multiple low-power modes (HALT, STOP, SNOOZE), and rich peripheral set including 10-bit ADC, timers, UART/SPI/I2C, real-time clock, and DMA. The 80-LQFP package provides ample I/O for keypad, sensor, and display expansion. The RL78 core uses a Harvard-style architecture with a 3-stage pipeline and unified register bank, achieving high code density and 1.6 DMIPS/MHz class performance. Three LCD driving voltage generation methods support different panel sizes and power budgets, allowing designers to optimize for cost or efficiency. Typical applications include home appliance LCD displays (washing machines, microwaves, induction cookers), measurement devices (digital multimeters, blood pressure monitors, smart meters), industrial control panels, and any battery-powered product that drives a character or segment LCD. When designing with this MCU, ensure the LCD voltage generation method (external divider, capacitive split, or boost) is selected in software to match the panel and power budget. The 80-LQFP's exposed pad should be soldered to a sufficient ground pour for thermal and electrical stability. This page synthesizes distributor pricing, RL78/L13 family drop-in alternatives, and practical low-power design notes not found in the manufacturer datasheet.

USD $2.14 有现货

R5F11BLEAFB#30

R5F11BLEAFB#30 - RL78/G1F 16-Bit 32MHz 64KB MCU | Renesas

The Renesas R5F11BLEAFB#30 is a 16-bit RL78/G1F microcontroller IC featuring a 32MHz CPU, 64KB Flash program memory and 64-pin LFQFP (10x10 mm) packaging. Built around the low-power RL78 core architecture, it targets multifunctional embedded designs with enhanced functionality for sensorless BLDC motor control, integrating analog peripherals, timers and communication interfaces typically required by small appliance and motor drive systems. The RL78 family is Renesas' ultra-low-power 16-bit microcontroller family built on a proprietary 16-bit CISC-like core with Harvard architecture, low-leakage process technology and multiple low-power operating modes. RL78/G1F sits at the intersection of motor-control-oriented MCUs in the family, adding a complementary PWM timer, high-speed 12-bit ADC, comparator and op-amp peripherals necessary to drive 1-shunt or 3-shunt sensorless BLDC motors from a single chip. The platform inherits from the broader 16-bit MCU category (microcontroller -> embedded processor -> semiconductor IC), making it a logical step up from 8-bit controllers for applications demanding more deterministic motor commutation. Key specifications include 64KB (64K x 8) Flash for program storage, 4KB RAM (typical for this family), an internal 32MHz high-speed oscillator with PLL, multiple serial interfaces (UART, I2C, CSI/SPI), a 12-bit A/D converter, on-chip comparator and programmable gain amplifier, plus hardware multiplier/divider. The 64-LFQFP-10x10 package provides ample analog and digital pin assignments for three-phase motor drive plus keypad/LED matrix scan expansion, while industrial-grade -40C to +85C operation allows deployment in white goods, factory automation and outdoor equipment. Typical applications include sensorless BLDC motor control for small fans, pumps, compressors and appliance inverter boards, consumer electronics such as hair dryers and air purifiers, and industrial motor subsystems. The chip's integrated PGAs and comparators reduce bill-of-materials by eliminating several external op-amps that discrete BLDC designs would require. When designing with the R5F11BLEAFB#30, allocate sufficient PCB area for the analog ground island and keep the analog VDD/AVSS traces short. Renesas provides the RL78/G1F hardware manual and motor control support software packages for fast code ramp-up. This RL78/G1F family is optimized for sensorless BLDC motor control but should be evaluated against newer RA or RX families for designs needing ARM Cortex or higher-performance DSP extensions.

USD $2.72 有现货

R5F211B4SP#W4

R5F211B4SP#W4 - 16KB Flash 16-Bit R8C MCU | Renesas | 20MHz

The Renesas Electronics R5F211B4SP#W4 is a 16-bit single-chip microcontroller belonging to the R8C/1B group, integrating 16 KB of flash program memory and an R8C/Tiny CPU core, and is housed in a 20-pin molded-plastic LSSOP package. It operates at 20 MHz from a 3 V/5 V supply, embeds 1 KB of RAM and 4 KB of data flash, and is fabricated using high-performance silicon-gate CMOS process technology. The part is supplied in tape-and-reel (W4) packaging and is targeted at cost-sensitive embedded control applications. What is an R8C microcontroller? The R8C is a family of 16-bit CISC microcontrollers from Renesas built around the R8C/Tiny CPU core, occupying a middle ground between 8-bit MCUs (such as the 78K0 or PIC16) and 32-bit devices. R8C parts share a common instruction set with the higher-end M16C family, support up to 16-bit internal data paths, and feature a compact instruction set that delivers high code density. They are widely used in consumer appliances, sensor-conditioning nodes, motor sub-controls, and human-interface subsystems where deterministic interrupt response and small footprint are required. Key features include 16 KB on-chip flash, 1024 bytes of RAM, 4096 bytes of data flash for non-volatile parameter storage, 12 on-chip I/O pins (shared with peripherals), one 16-bit timer, multiple 8-bit timers, a 10-bit A/D converter, UART and I2C serial interfaces, and a watchdog timer. The R8C/1B group also offers low-power modes including Halt, Stop, and Wait, along with voltage-detector reset and clock-prescaler options for power-conscious designs. The device is implemented in CMOS with a built-in oscillator (no external crystal required in many applications) and supports on-chip debug via a single-wire interface. Operating voltage is 3.0 V to 5.5 V and the operating temperature range covers -20 °C to +85 °C for the standard commercial grade. Typical applications include small appliance control, IR remote receivers, sensor signal-conditioning front ends, battery chargers, LED lighting controllers, and consumer human-interface devices. The 20-pin LSSOP footprint and minimal external BOM make it attractive as a drop-in upgrade for older 8-bit designs that need 16-bit arithmetic headroom. When designing with this part, place decoupling capacitors within 5 mm of VCC/AVCC and provide a solid ground pour under the device. For applications needing higher noise immunity or CAN connectivity, consider the larger R8C/2x or RL78/G12 families that Renesas recommends for new designs. This page consolidates distributor stock data, parametric compatibility notes, and cross-reference alternatives for the R5F211B4SP#W4 — information not aggregated in the bare manufacturer datasheet.

USD $3.04 有现货

R5F21216JFP

R5F21216JFP - 16-Bit 20MHz 32KB MCU | Renesas

Renesas Electronics R5F21216JFP is a 16-bit R8C/2x/21-series microcontroller operating at up to 20MHz, with 32KB flash memory and 2KB of additional RAM in a 48-pin LQFP package. It is designed for 3.3V and 5V embedded systems and combines a compact R8C CISC core with integrated memory and a 10-bit ADC. The R5C family is a group of Renesas microcontrollers built around the R8C CPU core, a CISC-style processor architecture intended for efficient control-oriented embedded applications. The R5F21216JFP belongs to the R8C/2x/21 group and is packaged in a 48-pin plastic molded LQFP, making it suitable for designs requiring a conventional surface-mount microcontroller footprint. Key verified features include a 20MHz operating speed, 32KB of flash memory organized as 32K x 8, 2KB of RAM, 3.3V and 5V operation, a 10-bit ADC, and an operating temperature range from -40°C to +85°C. The R8C CPU core uses silicon-gate CMOS technology and supports efficient instruction execution for embedded control, measurement, and communication-oriented products. The device is suitable for industrial control equipment, sensor interfaces, instrument panels, motor-control subsystems, appliance controllers, and compact embedded products. Its 3.3V and 5V compatibility supports both legacy 5V peripherals and modern low-voltage digital systems. The 48-LQFP package provides a higher pin count than small 32-pin MCUs, allowing more peripheral connectivity and easier access to analog, communication, and general-purpose I/O functions. When designing a replacement or new board, verify the complete pinout, peripheral configuration, clock requirements, memory organization, and electrical limits against the manufacturer datasheet. The part number and package suffix matter: R5F21216JFP#U1 and R5F21216JFP#U0 may have different ordering or qualification information. Verify current lifecycle and distributor availability before committing to production.

询价有现货

R5F21217JFP

R5F21217JFP - 16-Bit 20MHz 48KB MCU | Renesas | Embedded Control

The Renesas Electronics R5F21217JFP is a 16-bit R8C/2x/21-series microcontroller operating at up to 20 MHz with 48 KB of flash memory in a 48-pin 7 x 7 mm LQFP package. The verified distributor data identifies the device as an R8C microcontroller with 48K x 8 flash organization, while Mouser identifies a 3 V to 5 V supply range and a -40°C to +85°C temperature range. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one component. This MCU belongs to the broader hierarchy of embedded controllers, which also includes general-purpose MCUs, real-time controllers, and application-specific processors. Its 16-bit R8C CPU core and high instruction efficiency make it suitable for compact embedded-control systems where deterministic control, peripheral integration, and low board complexity matter. The primary verified features are a 20 MHz maximum clock, 48 KB flash memory, 16-bit architecture, R8C/2x/21 family membership, and a 48-pin plastic molded LQFP package. The Renesas product page states that the device uses a high-performance silicon-gate CMOS process and has a 1 MB address space. The distributor record also lists 48+2K memory, indicating 48 KB of flash plus an additional 2 KB resource, although the exact memory map is not specified in the supplied data. Typical application areas include industrial automation, embedded instruments, motor and actuator controllers, digital control panels, communication modules, and consumer devices requiring a compact 16-bit controller. The 3 V to 5 V operating range supports conventional embedded supply rails, while the -40°C to +85°C commercial temperature range supports industrial-temperature designs. Exact peripheral functions, RAM size, timer resources, communications interfaces, and electrical limits should be confirmed against the manufacturer datasheet before schematic capture. The most important PCB consideration is the 48-pin LQFP footprint. Place the MCU close to its bypass capacitors and route sensitive signals away from noisy switching nodes. Confirm the manufacturer pinout and exposed support requirements rather than relying on distributor-only descriptions. For replacement decisions, firmware compatibility, clock behavior, memory size, peripheral mapping, and package pin assignment must all be checked. This page combines verified distributor specifications, official Renesas product information, pricing references, package details, and engineering-oriented selection guidance. Because the supplied data does not include the complete electrical table or complete pin assignment, unspecified parameters are intentionally marked for verification rather than inferred.

USD $2.98 有现货

R5F21236JFP

R5F21236JFP - 16-Bit 20MHz MCU 32KB Flash | Renesas

The Renesas Electronics R5F21236JFP is a 16-bit R8C/23 microcontroller operating at up to 20 MHz, with 32 KB of flash memory and a 48-pin LQFP package. The verified product information identifies a 3/5 V device and describes it as an R8C-family MCU intended for embedded control applications. Its 32K x 8 flash organization, 16-bit architecture, and R8C CPU core place it between general-purpose embedded controllers and more specialized automotive networking devices. A microcontroller is a semiconductor device that integrates a CPU core, program memory, data memory, peripherals, and I/O into one package. In the system hierarchy, the R5F21236JFP belongs to the microcontroller class, uses the R8C CPU core, and provides embedded processing for control, communication, measurement, and automation functions. The R8C/23 family is specifically described by Renesas as a non-promotion family supported for customers that have already adopted the products. Key verified features include a 16-bit MCU architecture, 20 MHz operation, 32 KB flash storage, 3/5 V supply operation, and a 48-LQFP package measuring 7 x 7 mm according to the distributor listing. The R8C core is described as using sophisticated instructions intended to provide high instruction efficiency. The device also includes embedded data-flash blocks according to the retrieved R8C/23 material, while the exact density, voltage tolerances, peripheral list, and memory timing figures require the manufacturer datasheet. The verified R8C/23 description also identifies one CAN module and suitability for in-vehicle or FA networking. This makes the MCU relevant to industrial networking and automotive-adjacent control platforms, provided the exact electrical and qualification requirements are checked. Because the product is listed as non-promotion and supported only for previously adopted customers, lifecycle planning should confirm availability before new design commitments. Typical applications include industrial control equipment, factory automation nodes, CAN-connected machines, embedded instrumentation, and automotive or FA networking modules. The 48-LQFP package supports conventional PCB assembly and external interconnection, while the 20 MHz R8C core provides a balance of processing capability and embedded control integration. Exact RAM, peripheral, electrical, and pin-level requirements are not present in the supplied search data and are marked for verification. Before design-in, engineers should obtain the official Renesas datasheet, confirm the exact package pinout, validate 3/5 V operating conditions, and check the CAN and data-flash requirements against the system architecture. For sourcing, compare authorized inventory and lifecycle status rather than assuming a distributor listing means a new design is supported.

USD $2.74 有现货

R5F21236KFP

R5F21236KFP - 16-Bit 16MHz R8C/23 MCU, 32KB Flash | Renesas

The Renesas R5F21236KFP is a 16-bit single-chip CMOS microcontroller from the R8C/2x series, featuring the R8C/Tiny CPU core, 32KB of flash memory, 2KB of SRAM, and a maximum clock speed of 16MHz, all packaged in a 48-pin LQFP (7x7 mm). According to the verified distributor data, the device operates from a 3V/5V supply, supports an operating temperature range of -40C to +125C, and is qualified to the automotive Pb-free standard. The R8C/23 group is supported only for customers who have already adopted the product, signaling its long-running presence in established designs. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (typically flash), data memory (RAM), and a rich set of peripherals on a single die. The R8C/Tiny core used here belongs to the 16-bit microcontroller family, positioned between 8-bit MCUs (e.g., RL78, PIC16) and 32-bit microcontrollers (e.g., RX, ARM Cortex-M) in the Renesas product hierarchy. Its CISC-style instruction set and 1MB address space make it suitable for compact, deterministic embedded code in cost-sensitive applications. Key features of the R5F21236KFP include 32KB flash program memory, a 16-bit CPU with high instruction efficiency, on-chip peripherals typical of the R8C/23 group such as timers, serial interfaces, A/D converter, and interrupt controller, plus 1MB linear address space for executing instructions. The 48-pin LQFP package exposes a generous number of GPIO and peripheral pins while keeping board footprint modest. Automotive-grade Pb-free construction supports deployment in commercial vehicle environments. Technically, the device is built on a high-performance silicon-gate CMOS process. The 16MHz maximum operating frequency, when paired with the R8C CPU core, gives instruction throughput that is well matched to consumer, industrial, and white-goods control tasks. The combination of 32KB flash and 2KB SRAM allows medium-complexity firmware with reasonable data buffering. AEC-Q100-equivalent automotive temperature range and Pb-free finish extend applicability to harsh thermal environments. Typical applications include home appliances such as washing machines and microwave ovens, HVAC control, white goods and small-motor drive control, automotive body and accessory ECUs (within the part's automotive-grade classification), industrial sensor interfaces, and consumer-device keypad and LED matrix controllers. The R8C/23 group's mature software ecosystem and low BOM cost make it a common choice for high-volume, cost-driven products. When designing with this MCU, note that R8C/23 is a non-promotion group, meaning Renesas only supports existing adopters. New designs should consider RL78 or RX families for long-term support, but the part remains pin-compatible with other R8C/2x variants for legacy board reuse. Verify supply availability with distributors before committing new production.

USD $2.22 有现货

R5F21237JFP

R5F21237JFP - 16-Bit 20MHz MCU 48KB Flash | Renesas

The Renesas Electronics R5F21237JFP is a 16-bit R8C/23-group microcontroller built around the R8C CPU core, operating at up to 20 MHz and supplying 48 KB of flash program memory in a 48-pin LQFP package. The device supports a 3/5 V supply arrangement and combines a 1 Mb address space with efficient CISC-style instructions for embedded control applications. A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals on one device. The R8C/23 belongs to the Renesas MCU family within the broader embedded-controller hierarchy, where a general-purpose CPU core executes firmware while timers, serial interfaces, analog functions, and digital I/O interact with external hardware. The verified product information identifies a 48 KB (48K x 8) flash memory organization and a maximum clock frequency of 20 MHz. Renesas describes the silicon-gate CMOS implementation as providing a high level of instruction efficiency. These characteristics make the MCU suitable for compact embedded controllers whose firmware must coordinate several peripheral functions while operating from a 3 V or 5 V system supply. The R5F21237JFP is packaged in a 48-pin plastic molded LQFP measuring 7 x 7 mm. This surface-mount format supports conventional PCB assembly while exposing more I/O than smaller microcontroller packages. Exact peripheral inventories, RAM organization, timer resources, analog performance, and individual pin assignments are not stated in the supplied source material and should be confirmed in the manufacturer datasheet before schematic capture. Typical design uses include industrial control modules, sensor conditioning, communication equipment, motor or actuator control, and compact consumer appliances. Designers should validate the required peripherals, interrupt vectors, timing performance, and pin multiplexing against the Renesas R8C/23 documentation before committing the PCB layout. The main implementation consideration is firmware and timing compatibility during any lifecycle transition. Because the R8C/23 is supported only for customers already using the family, engineers should confirm availability, current lifecycle status, toolchain support, and any approved alternate source before a new production release. This page combines verified distributor and Renesas product information with package, application, comparison, and sourcing guidance. It identifies where the R5F21237JFP fits while separating documented facts from details that require manufacturer confirmation.

询价有现货

R5F21264SNFP#V2

R5F21264SNFP#V2 - 16KB Flash 16-Bit MCU | Renesas R8C/26

The Renesas R5F21264SNFP#V2 is a 16-bit single-chip microcontroller from the R8C/26 family, featuring 16KB of flash memory, a 20MHz R8C/Tiny CPU core, and packaged in a 32-pin LQFP (7x7 mm). It is designed for low-power embedded applications requiring moderate code density and is fabricated using a high-performance silicon gate CMOS process. The device operates from a 2.2V to 5.5V supply, supporting both 3V and 5V system rails, and integrates 16KB flash, 1KB SRAM, and a 10-bit A/D converter for sensor interfacing. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, RAM, and integrated peripherals. The R8C/26 belongs to the R8C family of 16-bit microcontrollers, a class of devices that sit between 8-bit MCUs (such as the 8051) and 32-bit ARM Cortex-M devices, offering higher code density than 8-bit parts while remaining simpler than full 32-bit architectures. Within the broader taxonomy, this MCU is part of Renesas' legacy 16-bit R8C platform, which has since been superseded for new designs by the RL78/G14 family. Key features include 20MHz maximum operating frequency, 16KB flash program memory, 1KB on-chip data RAM, a 10-bit A/D converter, multiple timers, watchdog timer, and on-chip debug support. The 32-pin LQFP package provides ample I/O for compact designs while remaining hand-solderable for prototyping. The wide 2.2V to 5.5V operating range allows direct connection to lithium-ion or regulated 5V rails. The R8C/Tiny CPU core implements a CISC-style instruction set optimized for code density, with most instructions executing in a single cycle and a wide register file that simplifies compiler code generation. On-chip peripherals include timers, a watchdog timer, voltage detector, and serial interfaces (UART, I2C, and SSI). The CMOS process yields low active and standby current, suitable for battery-powered products. Typical applications include consumer electronics, home appliances, industrial sensor controllers, and low-end automotive subsystems. The combination of small flash footprint, integrated peripherals, and a compact 32-pin LQFP package makes it well-suited to cost-sensitive embedded designs. Designers should consult the R8C/26 hardware manual for register-level configuration details. When migrating from the R8C/26 family, Renesas recommends the RL78/G14 as the modern replacement, which provides lower power consumption and enhanced peripherals while maintaining code compatibility through translation tools. For legacy support, the R5F21264SNFP#V2 remains active in the Renesas portfolio. This page synthesizes distributor stock, datasheet references, drop-in R8C/26 family alternatives, and practical design considerations beyond what is available in the bare datasheet.

USD $1.93 有现货

R5F21276SNFP#V2

R5F21276SNFP#V2 - 16-bit R8C MCU 32KB Flash 20MHz | Renesas

The Renesas Electronics R5F21276SNFP#V2 is a 16-bit single-chip microcontroller from the R8C/27 Group, embedding the R8C CPU core running at up to 20 MHz, with 32 KB of flash memory plus 2 KB of additional RAM area, operating from 3 V to 5 V and housed in a 32-pin molded-plastic LQFP (7 x 7 mm) package. A microcontroller unit (MCU) is a complete computer-on-a-chip that integrates a processor core, program memory (flash), data memory (RAM), and peripheral functions such as timers, serial interfaces, and analog-to-digital converters. Within the semiconductor hierarchy, the R5F21276SNFP#V2 belongs to the general-purpose 16-bit MCU class, positioned between 8-bit MCUs and 32-bit MCUs, and is part of Renesas' R8C Family / R8C/2x Series of cost-sensitive embedded controllers. Key differentiating specifications include the sophisticated R8C instruction set, which achieves a high level of instruction efficiency for compact, fast-executing code; the 3 V to 5 V supply range, which allows direct operation from both 3.3 V and 5 V systems; and lead-free (#V2 suffix) construction for RoHS-conscious manufacturing. The flash memory supports in-system programming, simplifying field firmware updates. The device is fabricated using a high-performance silicon gate CMOS process, which combines low power consumption with fast switching speeds. The R8C CPU core executes most instructions in short cycle counts and integrates on-chip peripherals typical of the R8C/27 Group, including timers, serial communication interfaces, and ADC functionality, reducing external component count and board cost in embedded designs. Typical applications include consumer electronics, home appliance control, industrial sub-systems, and motor control boards. The R8C/27 Group is a proven platform widely used in cost-driven products that require dependable 16-bit control with modest flash capacity. An important design consideration: Renesas states that the R8C/27 Group is supported only for customers who have already adopted these products, and the RL78/G14 Group is recommended for new designs. Engineers starting a new project should evaluate RL78/G14, while existing users should verify long-term supply. This page synthesizes distributor pricing, drop-in alternatives within the R8C/27 family, and practical design notes not found in the manufacturer datasheet.

USD $2.65 有现货

R5F212A8SNFA#V2

R5F212A8SNFA#V2 - R8C/2A 16-bit MCU 64KB Flash 20MHz | Renesas

The Renesas R5F212A8SNFA#V2 is a 16-bit R8C/2A group microcontroller built around the R8C/Tiny Series CPU core, delivering 20 MHz core clock performance with 64 KB of on-chip flash and 2 KB of RAM, packaged in a 64-pin LQFP (14x14 mm). It is fabricated using a high-performance silicon gate CMOS process optimized for low-power embedded control and supports a broad operating voltage range suitable for both 5 V and 3.3 V system designs. An R8C/Tiny microcontroller (MCU) is a 16-bit single-chip microcontroller from Renesas' R8C family that combines a compact, high-efficiency CPU core with rich on-chip peripherals including timers, A/D converters, communication interfaces, and watchdog functions. Within the broader taxonomy, R8C MCUs sit between 8-bit legacy MCUs (such as the 78K0 and RL78 base series) and 32-bit ARM Cortex-M devices, targeting cost-sensitive, deterministic real-time control applications. The R8C core implements sophisticated instructions and addressing modes that achieve high code density, reducing program memory consumption versus typical 8-bit CISC cores. The R5F212A8SNFA#V2 key specifications include 64 KB (64K x 8) flash program memory, 2 KB of RAM, 16-bit CPU architecture, 20 MHz maximum operating frequency, 64-pin LQFP surface-mount package, and an operating temperature range of -20C to +85C. The integrated R8C core supports a C-based development environment and is widely deployed in white goods, motor control, and industrial sensor applications. Peripherals typically include multi-channel 10-bit A/D converters, 8/16-bit timers, UART, I2C, and SSU (Synchronous Serial Communication Unit) interfaces. This part is intended only for customers who have already adopted R8C/2A in production; Renesas officially recommends the RL78/G14 family for new designs. Engineers selecting R5F212A8SNFA#V2 should confirm longevity of supply for legacy R8C/2A designs and validate peripheral availability against the specific R5F212A8 sub-group datasheet revision. Typical applications include home appliance control boards, industrial sensor signal conditioning, HVAC fan/valve controllers, low-end motor drivers, and consumer device human-machine interface logic. A core design consideration is supply-chain continuity - because the R8C/2A group is in legacy support, designers should evaluate second-source cross references and confirm lifetime-buy programs before committing to new product runs. This page synthesizes distributor pricing, parametric verification, and design notes not consolidated in the manufacturer datasheet, providing engineers with practical context for legacy R8C/2A procurement and migration planning to RL78.

USD $4.30 有现货

R5F212BCSDFP

R5F212BCSDFP - 16-bit 20MHz 128KB Flash MCU 64-LFQFP | Renesas

The Renesas R5F212BCSDFP is a 16-bit R8C/2B microcontroller built on the R8C/Tiny Series CPU core, delivering up to 20 MHz operation with 128 KB of on-chip Flash and 2 KB of additional RAM/DataFlash, housed in a 64-pin LFQFP (10x10 mm) package. An R8C/Tiny MCU is a compact, high-efficiency 16-bit microcontroller core optimised for embedded control applications, sitting in the broader hierarchy of 16-bit microcontrollers -> microcontrollers (MCU) -> microprocessors and microcontrollers -> semiconductor ICs. The R8C architecture combines a CISC-style instruction set with a 1 MB linear address space and high code density, making it well-suited to industrial and consumer applications requiring deterministic real-time control. Key features include 128 KB program Flash with single-voltage write/erase, 2 KB DataFlash for non-volatile data, an integrated voltage detector, on-chip debugger interface, multiple timers, a 10-bit A/D converter, and a rich serial-interface set (UART, I2C, SSI). The 64-LFQFP package provides generous I/O for peripheral expansion while keeping the board footprint compact. The R8C/2B group uses a Harvard-style internal bus architecture with a dedicated Flash memory controller, supporting in-system programming and background operation. The CPU core executes most instructions in one cycle at 20 MHz, and the architecture supports compact table-lookup instructions and hardware multiply/divide, enabling efficient closed-loop control firmware. Typical applications include industrial sensor signal conditioning, motor control subsystems, HVAC controllers, white goods control boards, and battery management secondary MCUs. The wide operating voltage range and small package also suit handheld measurement instruments and automotive body ECUs in non-safety-critical roles. When designing with this part, observe the decoupling and oscillator-layout guidelines from Renesas' R8C/2B hardware manual. The R8C/2B group is supported only for customers who have already adopted these products; Renesas recommends the RL78/G14 group for new designs, but the R5F212BCSDFP remains fully supported and in active production for existing programs. This page consolidates distributor pricing, lifecycle status, drop-in compatible variants, and PCB-level design notes that go beyond the manufacturer datasheet, allowing design engineers and procurement teams to make informed sourcing decisions in a single view.

USD $5.10 有现货

R5F2135CCNFP

R5F2135CCNFP - 16-bit R8C/35C MCU, 128KB Flash, 52-LQFP | Renesas

The Renesas R5F2135CCNFP is a 16-bit single-chip microcontroller from the R8C/35C group, built on the high-efficiency R8C CPU core and housed in a 52-pin LQFP package measuring 10 mm x 10 mm with a 0.65 mm pitch. The device integrates 128 KB of Flash program memory plus 4 KB of data Flash, runs at up to 20 MHz CPU clock, operates from a 1.8 V to 5.5 V supply (2.7 V to 5.5 V for Flash programming), and provides 48 general-purpose I/O pins plus multiple serial interfaces. The R8C/35C family is supported only for customers who have already adopted these products; Renesas recommends the RL78/G14 and RL78/G1F families for new designs. An R8C MCU is a 16-bit CISC microcontroller that combines a compact, high code-density instruction set with hardware multipliers and rich on-chip peripherals, sitting in the hierarchy: microcontroller -> embedded MCU -> 16-bit MCU -> R8C family -> Renesas 16-bit CISC lineup. Compared with 8-bit MCUs, the R8C architecture delivers higher MIPS per MHz and better C-language code density, while remaining simpler and lower-cost than 32-bit ARM Cortex-M0 alternatives for cost-sensitive appliance, sensor, and motor-control designs. Key features include 1 MB of linear address space, 6 KB of RAM, on-chip voltage detection, low-voltage detection, watchdog timer, multiple timers (8-bit and 16-bit), a 10-bit A/D converter, UART, I2C-bus, and a clock-synchronous serial interface. Built-in data Flash (4 KB) allows non-volatile parameter storage alongside the main 128 KB program Flash, eliminating an external EEPROM in many designs. The architecture uses a Harvard-style bus with a small RISC-like CISC instruction set, supporting signed multiply, hardware MAC-style operations, and bit-level addressing for compact control code. The 20 MHz core clock combined with a single-cycle instruction execution for many op-codes yields deterministic interrupt latency suitable for consumer and industrial real-time control. Typical applications include home appliance control (washing machines, microwave ovens, induction cookers), white-goods motor control (BLDC, fan, pump), HVAC thermostat and sensor interface boards, consumer electronics (rice cookers, water heaters), industrial sensor signal conditioning, and battery-powered smart metering front-ends. The wide 1.8 V to 5.5 V operating range allows direct connection to 4 NiMH cells or a single Li-ion cell via LDO. When designing with this part, evaluate the roadmap note carefully: Renesas explicitly states the R8C/35C group is supported only for existing customers, while the RL78/G14 and RL78/G1F groups are recommended for new designs. Plan around long-term availability, second-source qualification, and supply risk before committing to new volume production. This page consolidates distributor pricing, drop-in alternatives, and practical design considerations not found in the manufacturer datasheet alone, including parametric equivalent MPNs from the same R8C/35C group that share the 52-LQFP footprint.

USD $3.92 有现货

R5F51115ADLF#UA

R5F51115ADLF#UA - 32-bit RX111 MCU 128KB Flash USB | Renesas

The Renesas R5F51115ADLF#UA is a 32-bit RX111 microcontroller from the RXv1 CPU family, operating at 32 MHz with up to 50 DMIPS and 128 KB (128K x 8) of on-chip Flash memory, 16 KB SRAM, and integrated USB 2.0 Full-Speed device/host/OTG. Housed in a 64-pin FLGA (5x5 mm) surface-mount package, it is part of the Small-capacity ROM / Low Pin Count Lineup of the RX111 Group, designed for ultra-low-power connected applications. What is an RX111 microcontroller? The RX111 Group is Renesas' low-power 32-bit MCU family built on the RXv1 core, an evolution of the RX architecture that combines deterministic real-time response with sub-microamp standby current. The RX111 sits in the broader hierarchy RX sub-family -> 32-bit RISC microcontroller -> embedded MCU -> semiconductor. It targets battery-powered IoT endpoints and USB-connected peripherals where both processing headroom and deep-sleep efficiency are required, with Cortex-M-class competitors positioned on the power-vs-cost boundary. Key features of the R5F51115ADLF#UA include 128 KB Flash with code-flash protection, 16 KB SRAM, 8 KB data flash (work flash), 12-bit A/D converter with up to 14 channels, a 12-bit D/A converter, multiple low-power modes (Sleep, Deep Sleep, Software Standby), a DMA controller (DTMD), and a wide peripheral set including SCI, RSPI, and USB 2.0 FS. Operating from 1.8 V to 3.6 V across -40 C to +85 C (consumer D-version), it draws microamp-level current in software-standby with RTC running. Architecturally the RXv1 core is a Harvard-style 32-bit CISC/RISC hybrid with single-cycle multiply, hardware divider, and a tightly-coupled interrupt controller achieving 50 DMIPS / 1.25 CoreMark per MHz. Renesas' peripheral IP is reused across the RX family for software portability, while the integrated USB 2.0 FS PHY eliminates the external transceiver cost required by many competing Cortex-M0+ designs. Typical applications include USB peripherals (HID, CDC/ACM, Mass Storage), low-power IoT sensor nodes, consumer health devices, smart-home hubs with USB debug ports, industrial bar-code scanners, and battery-powered measurement instruments. The 14-channel 12-bit ADC plus USB makes the R5F51115ADLF#UA particularly attractive for compact instruments that stream analog samples to a host over USB while running for months on a single CR-series coin cell. When designing with this part, engineers should note that the FLGA-64 package does not expose pins on a standard 0.5 mm-pitch hand-solderable outline; reflow assembly with a stencil is mandatory, and the package exposes a central thermal pad that should be soldered for mechanical reliability. Firmware development uses the Renesas e2 studio IDE with GCC-RX or the CC-RX compiler. This page synthesizes distributor stock and pricing, RX111 same-family and cross-vendor drop-in alternatives, USB firmware considerations, and practical design notes for low-power USB peripherals not found on a single manufacturer datasheet. Availability is confirmed across DigiKey, Mouser, LCSC, and Octopart as of 2026-10-10.

USD $4.02 有现货

R5F51308ADFN#30

R5F51308ADFN#30 - RX130 32-bit 32MHz MCU 512KB Flash | Renesas

The Renesas R5F51308ADFN#30 is a cost-optimized, high-performance 32-bit RX130 microcontroller built around the RXv1 CPU core, delivering 50 DMIPS at 32 MHz and integrating 512 KB of flash memory plus 48 KB of SRAM. The device is housed in an 80-pin LFQFP (12x12 mm) package and operates from a single 1.8 V to 5.5 V supply, supporting both battery-powered and 5 V industrial rails. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (flash), volatile working memory (RAM), and a wide range of peripheral interfaces such as ADC, timers, communication controllers, and capacitive-touch hardware. The RX130 sits inside the broader Renesas RX family (RX100/RX200/RX600/RX700) and is positioned as the cost-optimized, ultra-low-power entry tier with on-chip touch sensing. LDOs, op-amps, and reset supervisors are typically placed around the RX130 to build a complete power-tree for human-machine interface (HMI), home appliance, and industrial-sensor designs. Key features include up to 36 channels of capacitive touch sensing with improved noise immunity, sensitivity, and water resistance versus previous RX touch generation, a 12-bit A/D converter, a D/A converter, a real-time clock (RTC), IEC60730 compliance for appliance-safety code libraries, and up to 6 communication channels. The wide 1.8 V to 5.5 V supply range allows direct connection to 5 V sensors and human-machine interface panels without level shifters. An integrated RTC and low-power modes make standby power budgets achievable for battery-operated appliances. The RXv1 core is paired with single-precision FPU hardware support and tightly-coupled flash that supports zero-wait-state execution at 32 MHz, giving 50 DMIPS performance suitable for user-interface controllers, sensor fusion, and small protocol stacks. The capacitive-touch peripheral runs autonomously from the CPU, leaving the core free for application logic and reducing interrupt load in noisy environments. Hardware IEC60730 class-B support accelerates functional-safety certification for white goods. Typical applications include home appliance user interfaces with touch keys, industrial control panels, battery-powered sensor nodes, building automation keypads, and small motor-control boards that need ADC plus timer resources on a single 5 V rail. The 80-pin LFQFP exposes ample GPIO for parallel displays, button matrices, and brushless-DC FET drivers. When designing with the RX130, place the decoupling network as close as possible to the power pins, route touch-sensing traces with guard rings, and confirm IEC60730 firmware libraries are linked when targeting white-goods safety standards. Always validate the touch-sensing threshold with the production PCB stack-up. This page synthesizes distributor pricing, drop-in alternative analysis, and practical design notes not consolidated in the Renesas datasheet alone.

USD $2.85 有现货

R5F51308ADFP#30

R5F51308ADFP#30 - RX130 32MHz 512KB Flash MCU | Renesas

The Renesas Electronics R5F51308ADFP#30 is a 32-bit RX130 microcontroller running at 32 MHz with 512 KB Flash and 48 KB SRAM, housed in a 100-pin LFQFP (14x14 mm) package. It is part of the RX130 family - a cost-optimized, high-performance 32-bit MCU group with enhanced capacitive touch key function and 5 V operation support, delivering up to 50 DMIPS per the verified distributor listings. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and on-chip peripherals such as timers, communication interfaces, ADCs, and touch sensing. MCUs form the lowest tier of the embedded computing hierarchy: embedded processor -> microcontroller -> 32-bit MCU -> RX130 family. They sit beneath microprocessors (MPUs) in capability but above discrete logic in integration, enabling compact, low-power designs for appliance, industrial, and human-machine-interface (HMI) products. Key features of the R5F51308ADFP#30 include 88 I/O pins (per JLCPCB listing), a 12-bit A/D converter with up to 36 capacitive touch sensing channels, an 8-bit D/A converter, 6 communication channels (including SCI, I2C, and SPI variants), an RTC, IEC60730 compliance support for household appliance safety standards, and a wide 1.8 V to 5.5 V single-supply operating range. The device uses the proprietary RXv1 CPU core with single-precision FPU. The RX130 architecture combines deterministic interrupt response with low-power operation, making it well suited for white goods, sensor HMI, and battery-friendly IoT edge nodes. The integrated touch sensing unit uses an improved mutual-capacitance detection method providing better noise immunity, sensitivity, and water resistance versus earlier Renesas touch MCUs. Typical applications include washing machine and refrigerator control boards, induction cooktop user interfaces, smart thermostat keypads, industrial sensor HMI panels, and small IoT sensor hubs. The wide 5 V tolerance simplifies interfacing with legacy analog front-ends and white-goods actuator drivers. When designing with this part, remember that the R5F51308ADFP#30 is the 100-pin / 512 KB / -40C to +85C industrial-grade variant. For lower pin counts, smaller flash, or extended temperature (-40C to +105C) refer to other RX130 group members listed in the family datasheet (R01DS0243EU0300). This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet, with cross-references verified against the Renesas RX130 group datasheet and authorized distributor data as of 2026-10-10.

USD $3.75 有现货

R5F52203BDFL

R5F52203BDFL - 32MHz 32-bit RX220 MCU, 64KB Flash, LQFP-48 | Renesas

The Renesas Electronics R5F52203BDFL is a 32-bit RX220 family microcontroller built on the RXv1 core, delivering 32 MHz CPU performance with 64 KB of on-chip flash and 8 KB of SRAM in a 48-pin LFQFP (7x7 mm) package. It is an entry-level RX200 MCU positioned for designs needing minimum peripheral count, low active power, and small footprint. An entry-level 32-bit MCU (microcontroller unit) integrates a CPU core, on-chip flash program memory, SRAM, and a curated set of peripherals into a single IC. Within the broader hierarchy it sits between 8/16-bit legacy MCUs and high-performance Cortex-M/RX700 parts. The RX220 series in particular is the slimmed-down, low-pin-count derivative of the RX210 family, retaining pin-compatibility and the same RXv1 instruction set while trimming unused peripherals to reduce cost and active current. Key features include 64 KB (64K x 8) flash, 8 KB SRAM, up to 32 MHz CPU clock, a 12-bit A/D converter, multi-function timer (MTU2), and serial interfaces (SCI, I2C-bus compatible, RSPI). Supply voltage spans 1.8 V to 5.5 V, supporting both 3.3 V and 5 V system rails. The device also integrates watchdog timer, real-time clock, low-voltage detection, and on-chip debugging via a single-wire interface. Architecturally, the RX220 uses a 3-stage pipelined RXv1 core with hardware MAC (multiply-accumulate) instructions, supporting C-level DSP routines without an extra DSP unit. The 1.8 V internal core regulator and selectable low-power modes (Sleep, Deep Sleep) reduce quiescent current to a few microamps, enabling coin-cell powered designs. Typical applications include consumer appliances, sensor signal conditioning, battery-driven IoT nodes, low-end motor control, and human-interface boards replacing 8/16-bit MCUs. The wide 1.8-5.5 V supply simplifies migration from 5 V legacy systems. Consider total power budget: at 32 MHz active and 3.3 V, the core draws several mA, so duty-cycling is essential for battery lifetime. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found in the standalone datasheet.

USD $2.62 有现货

R5F52205BDFP#10

R5F52205BDFP#10 - 32MHz RX220 MCU 128KB Flash 100-LFQFP | Renesas

The Renesas Electronics R5F52205BDFP#10 is an entry-level 32-bit RX220 microcontroller featuring a 32MHz RXv1 core, 128KB flash, and 8KB SRAM, housed in a 100-pin LFQFP (14x14mm) package. It is part of the RX220 Group, a slimmed-down derivative of the RX210 family with high pin-arrangement and software compatibility. Operating from 1.62V to 5.5V, this MCU targets cost-sensitive applications requiring minimum peripheral count and low power consumption. What is a microcontroller (MCU)? A microcontroller is a single-chip computer that integrates a CPU core, program memory (flash), data memory (SRAM), and peripherals such as timers, communication interfaces, and analog blocks. The RX220 family sits within the broader taxonomy: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. RXv1 cores use the Renesas RX instruction set, delivering high code density and deterministic interrupt response suited to real-time embedded designs. Key features of the R5F52205BDFP#10 include 128KB flash with 8KB SRAM, a 32MHz maximum operating frequency, and an industrial temperature grade of -40C to +85C. The device integrates a minimum set of peripherals aimed at entry-level designs: multiple timers, a 12-bit A/D converter, and serial communication interfaces. The 100-pin LFQFP package provides ample I/O for typical embedded applications while remaining cost-effective for high-volume production. The RX220 Group achieves high pin-arrangement and software compatibility with the higher-end RX210 Group, allowing engineers to migrate designs upward as memory or peripheral needs grow. This compatibility reduces design risk and accelerates time-to-market when scaling from entry-level to mid-range applications. Typical applications include home appliances, consumer electronics, industrial sensor nodes, simple motor control, and battery-powered measurement instruments. The wide 1.62V-5.5V operating range supports both 3.3V and 5V system designs without external level translation. When designing with this MCU, ensure the power supply rail stays within 1.62V-5.5V during all transient conditions, and follow Renesas RX220 hardware manual guidance for oscillator and reset circuit design. Unused pins should be configured with appropriate input pull-ups or left open per the hardware manual to minimize power consumption. This page synthesizes distributor pricing from DigiKey, Mouser, and LCSC, drop-in alternatives from the RX220 family and cross-brand ARM Cortex-M0+ competitors, and practical design notes not consolidated in the manufacturer datasheet.

USD $4.62 有现货

R5F52206BDFP#V0

R5F52206BDFP#V0 - 32-bit RX220 MCU 256KB Flash LFQFP-100 | Renesas

The Renesas R5F52206BDFP#V0 is an entry-level 32-bit RX220 microcontroller built on the RXv1 CPU core, delivering 32 MHz CPU speed with 256 KB flash memory and 16 KB SRAM in a 100-pin LFQFP (14x14 mm) package. It operates across 2.7 V to 5.5 V supply ranges and supports industrial temperature grades, making it suitable for cost-sensitive embedded designs that need more performance than 8-bit MCUs but minimal BOM complexity. What is a 32-bit microcontroller (MCU)? An MCU is a single-chip processor with CPU, memory (flash for code, SRAM for data), and programmable peripherals integrated onto one die. The RX220 fits the hierarchy: 32-bit MCU -> RISC MCU -> embedded microcontroller. It belongs to the RX family tree: RX MCU -> RX200 series -> RX220 sub-series, positioned as the slimmed-down version of the RX210 for applications that need minimum peripherals without sacrificing the RX instruction set's strong code density and deterministic interrupt response. Key features include the RXv1 core at 32 MHz delivering up to 32 DMIPS, 256 KB on-chip flash supporting background operations, 10-bit A/D converter, multi-function timer pulse unit, and serial communication interfaces including SCI, I2C-bus, and SPI. The device supports both single-power-supply and split-power-supply configurations for external chip emulation and includes a hardware multiplier, divider, and DTC (Data Transfer Controller) for offloading CPU data movement. Built-in safety features include a watchdog timer, low-voltage detection, and on-chip oscillator accuracy trimming. Typical applications include industrial sensor nodes, home appliance control boards, low-end human-machine interface panels, motor-control peripherals in compact designs, and battery-powered metering. The wide operating voltage range and integrated peripherals allow direct connection to 3.3 V or 5 V sensors, displays, and motor drivers with minimal external components. The LFQFP-100 package provides a generous 1.0 mm lead pitch for cost-effective two-layer PCB assembly. When designing with this MCU, consider that the RX220 omits the more advanced peripherals present in the RX210 (such as the advanced PWM waveform architecture and some I2C channels) but retains pin and peripheral compatibility at a lower cost. Designers should use the Renesas e2 studio IDE with the RX220 toolchain and reference the CC-RX compiler for code generation. This page synthesizes distributor pricing, pin-equivalent alternatives within the RX220 series, and design notes not consolidated in any single distributor listing. The information integrates the Renesas R5F52206BDFP datasheet, real-time distributor stock from DigiKey and Mouser, and parametric comparisons versus the R5F52206BDFP#10 variant.

USD $4.10 有现货

R5F52306ADFM#30

R5F52306ADFM#30 - RXv2 32-bit MCU 256KB Flash | Renesas

The Renesas Electronics R5F52306ADFM#30 is a 32-bit RXv2-core microcontroller from the RX230 family, operating at up to 54 MHz and delivering 88.56 DMIPS while integrating a single-precision FPU for DSP-class math in power-constrained applications. The device combines 256 KB of code flash and 32 KB of SRAM on-chip, packaged in a 64-pin LFQFP (10x10 mm) form factor. This part variant uses the #30 Renesas ordering code suffix that designates the operating temperature grade and shipping form. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program and data memory, and a set of peripherals in a single chip. The RX family belongs to the broader category of 32-bit embedded microcontrollers in the power management and embedded computing domain, positioned between 16-bit MCUs (such as the PIC24 or RL78 families) and 64-bit application processors. The RXv2 core supersedes the original RX core with enhanced DSP and FPU throughput, and the RX230 sub-family emphasizes ultra-low power consumption alongside USB 2.0 Full-Speed host/function/OTG, CAN, SD host interface, serial sound interface, and a capacitive touch sensing unit. Key features of the R5F52306ADFM#30 include 256 KB flash (256K x 8), 32 KB SRAM, integrated capacitive touch sensing, hardware AES and TRNG security options, and a rich peripheral set spanning multiple SCI, I2C, SPI, RSPI, and CAN channels. The RXv2 core implements Harvard cache, single-cycle MAC, and a single-precision FPU, allowing efficient digital signal processing without an external DSP. Low-power modes include deep standby and several software-controlled sleep states that draw microamps, enabling coin-cell or energy-harvest powered designs. In terms of architecture, the RX230 is implemented in a 40 nm-class low-leakage CMOS process and pairs the RXv2 core with dedicated low-power peripherals and an interrupt controller (ICU) supporting NMI and 16 priority levels. The chip supports JTAG and FINE debug interfaces for in-circuit emulation, and the flash memory is programmable via the onboard SCI bootloader. Typical applications for the R5F52306ADFM#30 include human-machine interface (HMI) panels with capacitive touch, low-power IoT sensor nodes, USB peripherals (HID, CDC, vendor classes), battery-powered industrial sensors, building automation controllers, and small motor control subsystems. The integrated touch sensing unit and USB 2.0 FS OTG make it especially well suited for connected appliances, white goods, and consumer electronics. When designing with the RX230, allow sufficient decoupling (100 nF + bulk) on each VCC/VSS pair and follow the Renesas RX230 hardware manual layout for the analog AVCC rail when using the ADC. Take care to respect the flash programming voltage ramp timing and the recommended thermal profile (peak 260 C) during reflow to avoid internal flash stress. This page synthesizes distributor pricing, same-family Renesas drop-in alternatives, and application guidance beyond what is included in the manufacturer's datasheet, helping engineers shorten the BOM selection cycle.

USD $4.61 有现货

R5F52316ADFP#10

R5F52316ADFP#10 - 54MHz RX231 256KB Flash MCU | Renesas

The Renesas R5F52316ADFP#10 is a 32-bit RX231 microcontroller built on the RXv2 core with integrated single-precision FPU and enhanced DSP, delivering 88.56 DMIPS at 54 MHz maximum operating frequency. The device integrates 256 KB of flash memory and 32 KB of SRAM, and is housed in a 100-pin LFQFP package measuring 14x14 mm. It supports USB 2.0 full-speed host/function/OTG, CAN, SD host interface, serial sound interface, and a capacitive touch sensing unit, making it a flexible mixed-signal MCU for human-machine-interface and connected embedded designs. What is a low-power high-performance RX MCU? The RX231 belongs to Renesas' RX200 family of low-power 32-bit microcontrollers based on the RXv2 architecture, which combines an enhanced Harvard bus with a hardware FPU and DSP extensions. Within the broader taxonomy, R5F52316ADFP#10 is a microcontroller (MCU) -> embedded processor -> semiconductor, positioned for energy-conscious applications that still require DSP-class math and rich connectivity. Key features include a wide operating voltage range from 1.8 V to 5.5 V, integrated 12-bit A/D converter with up to 4 channels of D/A, real-time clock, and security functions such as a unique hardware ID and AES-style acceleration. It also integrates a capacitive touch sensing unit (CTSU) that simplifies implementing waterproof touch buttons and sliders without external components. Multiple low-power modes - including deep software standby drawing only a few microamps - extend battery life across portable and always-on use cases. From an architectural standpoint, the RXv2 core features a 5-stage pipeline, single-cycle MAC, and dedicated FPU, achieving up to 1.65 DMIPS/MHz. The MCU supports up to 70 GPIO pins, multiple serial interfaces (SCI, I2C, SPI, RSPI), and an external bus interface for memory expansion. ECC on flash and SRAM, watchdog timers, and a low-voltage detector add functional-safety features that simplify IEC/UL consumer-safety designs. Typical applications include home appliances with touch UI, IoT sensor nodes, USB peripherals, industrial HMI panels, and low-power connected medical devices. The wide 5.5 V tolerance also makes the device robust in 24 V industrial bus systems after simple LDO regulation. When designing with R5F52316ADFP#10, evaluate the 5 V-tolerant GPIO count and the integrated CTSU to reduce BOM in touch-UI designs. For production programming, Renesas' e2 studio and the Flash Development Toolkit support on-board programming via the SCI bootloader. This page synthesizes distributor pricing, cross-brand pin-compatible alternatives, and design notes not duplicated on the manufacturer product page.

USD $6.10 有现货

R5F56216BDFB

R5F56216BDFB - 100MHz 32-bit RX621 MCU, 256KB Flash | Renesas

The Renesas R5F56216BDFB is a 32-bit microcontroller from the RX621/RX62N family, operating at up to 100 MHz with 165 DMIPS core performance and delivering up to 512 Kbytes of on-chip Flash memory in a 144-pin LFQFP (20x20 mm) package. The device integrates 256 KB Flash, 64 KB SRAM, USB 2.0 Host/Function, CAN, and peripheral functions targeted at industrial and consumer connectivity. An RX-family microcontroller is a 32-bit RISC MCU built around the Renesas RXv1 core, sitting in the hierarchy above 8/16-bit microcontrollers and below general-purpose DSPs in embedded-system taxonomy. The RX core combines single-cycle execution, an on-chip FPU, and tightly-coupled memory architecture to deliver deterministic real-time performance while retaining C-language programming ease. This category is widely used in industrial automation, building controls, and human-machine interface (HMI) equipment where deterministic interrupt latency and rich connectivity are required. Key features of the R5F56216BDFB include 100 MHz maximum operating frequency, 165 DMIPS at 1.25 DMIPS/MHz, hardware multiply/divide and FPU support, 256 KB Flash program memory, 64 KB SRAM, USB 2.0 Host/Function Controller, CAN interface, 10-bit A/D converter, multifunction timer (MTU2), DMA controller (DMAC/DTC), and a wide operating voltage range suitable for 3.3 V systems. The 144-pin LFQFP package provides ample I/O for parallel buses and external memory interfaces. Architecturally, the RX621 uses a 5-stage pipeline Harvard architecture with separate instruction and data buses, integrated FPU for IEEE-754 single-precision operations, a dedicated flash access accelerator, and 16 KB of user-accessible data flash. The integrated peripheral bridge supports up to 123 I/O lines along with rich serial channels including SCI (UART/IrDA/I2C), RSPI, and the USB 2.0 Host controller with embedded PHY. Typical applications include industrial serial-to-Ethernet gateways, building automation controllers, USB host devices such as printers and POS terminals, factory automation PLCs, and consumer devices requiring both Ethernet and CAN connectivity. The wide operating voltage and temperature range also suit HVAC and motor-control peripherals. When designing with this part, ensure the USB PHY reference resistor and decoupling follow the datasheet reference design, and that firmware uses the on-chip flash-access accelerator to keep interrupt latency well below 1 us at 100 MHz operation.

USD $6.30 有现货

R5F56216BDFB#V0

R5F56216BDFB#V0 - 100MHz RX MCU 256KB Flash 144-LFQFP | Renesas

The Renesas R5F56216BDFB#V0 is a 32-bit RX600-series microcontroller built around the high-performance RX v1 CPU core, delivering 100 MHz operation with single-precision FPU, 165 DMIPS throughput, and 256 KB of on-chip Flash plus 64 KB SRAM in a 144-pin LFQFP (20x20 mm) package. The part integrates connectivity peripherals including Ethernet MAC, USB 2.0 Full-Speed Host/Function, CAN, and multiple serial interfaces, alongside a 12-bit ADC, timers, and a rich-function DTC and DMA engine. Operating voltage is 2.7 V to 3.6 V from a single supply, with multiple low-power modes for energy-aware applications. A 32-bit MCU is a microprocessor in which the data path, registers, and ALU are 32 bits wide, allowing a single instruction to handle larger integer and floating-point values than an 8- or 16-bit controller. The RX core sits in the broader taxonomy as 32-bit microcontroller -> embedded MCU -> semiconductor -> integrated circuit. Combining high CPU throughput, large SRAM, and integrated connectivity, the RX621 family targets applications that previously required an external host processor plus discrete communication ICs. Key features include 100 MHz core with 165 DMIPS, hardware single-precision FPU, 256 KB Flash / 64 KB SRAM, 10 KB data Flash, Ethernet MAC, USB 2.0 FS Host/Function, CAN, and up to 123 I/O pins. The 12-bit ADC achieves up to 1 Msps with three sample-and-hold units, while the EXDMAC and DTC subsystems handle data movement without CPU intervention. Typical applications include industrial Ethernet gateways, factory automation controllers, USB-connected human-machine interfaces (HMIs), building-automation concentrators, and CAN-connected sensor hubs. The wide peripheral mix and large SRAM also make the part suitable for point-of-sale terminals and small-format IoT edge nodes. When designing with the R5F56216BDFB#V0, allocate decoupling per the hardware manual, observe the 0.5 mm LQFP pitch soldering profile (JEDEC J-STD-020 MSL classification applies), and verify the pin assignments against the device's full 144-pin LQFP variant symbol. The part is RoHS-compliant per Renesas product information. This page synthesizes distributor pricing, drop-in same-package alternatives from the RX621 family, and practical design notes that complement the official Renesas hardware manual rather than repeating it verbatim.

USD $8.20 有现货

产品（18688)