微控制器

STM32F746IGT6

STM32F746IGT6 - Cortex-M7 MCU 1MB Flash 216MHz LQFP-176

The STMicroelectronics STM32F746IGT6 is a high-performance ARM Cortex-M7 32-bit RISC microcontroller operating at up to 216 MHz with 1 MB of Flash and 340 KB of SRAM, housed in a 176-pin LQFP (24x24 mm) industrial-grade package. The device integrates a double-precision FPU, L1 cache (16 KB I-cache + 16 KB D-cache), an ART Accelerator for zero-wait-state execution from Flash, and a Chrom-ART graphics engine for TFT and JPEG codec acceleration. A microcontroller (MCU) is a single-chip computer containing a CPU core, memory, peripherals, and I/O. The Cortex-M7 family is an ARM architecture targeting deterministic embedded systems with DSP and SIMD extensions and an optional hardware floating-point unit. The STM32F7 line in the broader STM32 taxonomy sits under 32-bit Cortex-M, then microcontrollers, then microprocessors, then semiconductors. It is a step above Cortex-M4 parts and below Cortex-M33/M85 sub-1 GHz wireless variants, sharing the same instruction set but adding dual-issue pipelines, branch prediction, and 6-stage superscalar execution. Key features include up to 216 MHz operation, 1 MB on-chip Flash, 340 KB SRAM (including 64 KB CCM SRAM accessible only by the CPU), three 12-bit ADCs at 2.4 MSPS, two 12-bit DACs, USB 2.0 OTG full-speed + high-speed with on-chip PHY, 10/100 Ethernet MAC, three CAN 2.0B controllers, an SDMMC interface, an 8- to 14-bit camera interface, and an LCD-TFT controller (up to XGA resolution). Cryptographic acceleration is provided through AES-128/192/256, Triple-DES, and hash (SHA-1/MD5) plus True Random Number Generator (TRNG) hardware. The architecture uses a Harvard bus matrix with separate I/D buses, a multi-layer AHB/AXI interconnect to give the CPU simultaneous access to Flash, SRAM, and peripherals, plus a dedicated DMA controller (two DMA controllers, each with 8 streams) for memory-to-memory/peripheral-to-memory transfers without CPU load. The TFT-LCD controller, JPEG codec, and SDMMC interface are tied to the AXI bus for high throughput, while analog peripherals sit on APB. Typical applications include HMI touch panels, industrial motor control drives, patient monitors, smart-grid energy meters, IP cameras with MJPEG streaming, barcode scanners, GNSS receivers, and consumer appliances needing TFT display + Ethernet connectivity. The 1 MB Flash is sufficient for full LVGL graphical stacks, and the Chrom-ART accelerator frees the CPU for application logic. Design considerations include mandatory 1.8V/2.5V/3.3V rail sequencing on VDD/VDDA pins, the need for a 32.768 kHz LSE crystal for RTC accuracy, and BOOT0 strap selection for Flash vs System memory bootloader boot. PCB layout requires a continuous GND plane under the LQFP and four-layer stack-up with dedicated power islands for VDDA to keep ADC SNR above 60 dBFS. This page synthesizes distributor pricing as of 2026-10-10, drop-in LQFP-176 same-package alternatives from the STM32F7 family, and practical PCB design guidance not collected in the manufacturer datasheet.

USD $13.76 有现货

STM32F746NGH6

STM32F746NGH6 - 32-bit ARM Cortex-M7 MCU, 1MB Flash | STMicroelectronics

The STM32F746NGH6 is a high-performance 32-bit microcontroller from STMicroelectronics based on the ARM Cortex-M7 core, operating at up to 216 MHz. It integrates 1 MB of Flash memory and 320 KB of SRAM, along with a rich set of peripherals including TFT-LCD controller, JPEG codec, Ethernet MAC, camera interface, and multiple communication interfaces. The device is housed in a 216-ball TFBGA package (H6 suffix) with a 13x13 mm footprint, offering a compact solution for advanced embedded applications. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the backbone of modern electronics, found in automotive systems, industrial controls, consumer electronics, and IoT devices. The STM32F746NGH6 belongs to the STM32F7 series, which is part of the broader STM32 family of 32-bit ARM Cortex-M based MCUs, positioned as a high-performance option within the STM32 portfolio. Key features of the STM32F746NGH6 include a 216 MHz ARM Cortex-M7 core with double-precision FPU and DSP instructions, 1 MB of Flash memory, 320 KB of SRAM, and a Chrom-ART Accelerator for advanced graphics. It supports a wide range of communication interfaces: 4x USART, 4x UART, 6x SPI, 4x I2C, 2x CAN, 1x SDMMC, 1x USB 2.0 OTG HS/FS, 1x Ethernet MAC, and 1x camera interface. The device also features a TFT-LCD controller supporting up to XGA resolution, a JPEG codec, and a true random number generator (TRNG). Technically, the STM32F746NGH6 is built on a 40nm process technology, enabling high clock speeds with low power consumption. It includes a memory protection unit (MPU), a cache (I-Cache and D-Cache) to optimize performance, and a power management unit with multiple low-power modes. The device supports a supply voltage range of 1.7V to 3.6V and operates over a temperature range of -40°C to +85°C (H6 suffix indicates industrial temperature grade). Typical applications include high-end consumer electronics, industrial automation, motor control, medical devices, and IoT gateways. The combination of high processing power, rich connectivity, and advanced graphics capabilities makes it ideal for human-machine interfaces (HMI), audio processing, and real-time control systems. When designing with this MCU, ensure proper decoupling of the power supply pins and follow the layout guidelines in the datasheet for the TFBGA package. The device requires a 25 MHz crystal for the HSE oscillator and supports an internal 16 MHz HSI oscillator for cost-sensitive designs.

USD $18.30 有现货

STM32F746ZGT6

STM32F746ZGT6 - 216MHz Cortex-M7 1MB Flash MCU | STMicroelectronics

The STMicroelectronics STM32F746ZGT6 is a high-performance 32-bit Arm Cortex-M7 microcontroller operating at up to 216 MHz, featuring 1 MB of Flash and 320 KB of SRAM (plus 16 KB DTCM), packaged in a 144-pin LQFP (20x20 mm). It integrates a single-precision FPU, a full DSP instruction set, the ART Accelerator with 6 KB instruction and 6 KB data caches, and a Chrom-ART Accelerator (DMA2D) for 2D graphics, while delivering up to 462 DMIPS / 1082 CoreMark. The device exposes an LCD-TFT controller with capacitive multi-touch support, an Ethernet MAC with IEEE 1588, USB OTG HS and FS, dual CAN 2.0B, a camera interface, SPDIFRX, and dual 12-bit DACs alongside three 12-bit ADCs. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals on one die, sitting at the heart of the embedded-system hierarchy: semiconductor -> integrated circuit -> microcontroller -> 32-bit MCU. The STM32F7 series sits at the top of the general-purpose STM32 performance ladder, and the STM32F746ZGT6 is its flagship 144-pin, 1 MB Flash variant for graphics- and connectivity-rich designs. Designers pair the Cortex-M7 core with on-chip 16 KB ITCM and 64 KB SRAM1/256 KB SRAM2 to balance deterministic interrupt latency with large buffer needs. Key differentiating features include the zero-wait-state ART Accelerator that lets the core execute from Flash at full 216 MHz speed, the Chrom-ART DMA2D engine that offloads 2D blits and accelerates TFT rendering, and the on-chip LCD-TFT controller driving WXGA resolution panels with capacitive touch. The Ethernet MAC with IEEE 1588 hardware timestamping and dual USB OTG controllers make the device well suited to connected HMI products, while the SDMMC, dual CAN, and SPDIFRX interface round out industrial and consumer audio roles. Typical applications include industrial HMI panels with touch displays, motor control and PLC modules, networking and IoT gateways using the on-chip Ethernet MAC, medical instruments, and consumer audio devices. The 144-LQFP (20x20) footprint and 1.7V-3.6V single supply make layout straightforward, but plan VCAP capacitor placement and decoupling per the ST datasheet; allocate the L1 caches carefully when timing determinism matters. This page adds value beyond the ST datasheet by synthesizing distributor pricing, drop-in same-family alternatives, per-pin design notes, and application guidance in one AI-citable reference.

USD $12.10 有现货

STM32F746ZGT7

STM32F746ZGT7 - 216MHz Cortex-M7 1MB Flash MCU | STMicroelectronics

The STMicroelectronics STM32F746ZGT7 is a high-performance 32-bit ARM Cortex-M7 microcontroller running at up to 216 MHz with 1 MB of Flash memory and 320 KB of SRAM, housed in a 144-pin LQFP (20x20 mm) package. It integrates a single-precision floating-point unit (SFPU), a full set of DSP instructions, and the Chrom-ART Accelerator for graphics, making it one of the most capable general-purpose MCUs in the STM32F7 family. A microcontroller unit (MCU) is a self-contained computer on a single chip that combines a processor core, program memory (Flash), data memory (SRAM), and configurable peripherals such as timers, serial interfaces, and analog converters. MCUs sit at the heart of embedded systems, bridging the gap between sensors, actuators, and communication networks. The STM32F746ZGT7 belongs to the STM32F7 series, which itself is part of the broader STM32 ARM Cortex-M portfolio and the wider class of 32-bit embedded microcontrollers. Key features include the 216 MHz Cortex-M7 core with 1082 CoreMark score, 1 MB Flash, 320 KB SRAM (including 64 KB DTCM and 16 KB ITCM), an LCD-TFT controller with Chrom-ART acceleration, Ethernet MAC with IEEE 1588, USB OTG HS/FS, dual CAN, and up to 168 GPIOs. The integrated FPU and DSP extensions allow efficient implementation of motor control, audio processing, and digital filtering algorithms without an external coprocessor. The device is fabricated on ST's 90 nm embedded Flash process and operates from 1.7 V to 3.6 V, with a flexible power architecture supporting multiple low-power modes down to 1.7 V. The ART Accelerator and L1 cache deliver near-zero-wait-state execution from Flash at 216 MHz, achieving 1082 CoreMark and 462 DMIPS. Typical applications include industrial HMI panels, embedded networking gateways, motor control drives, audio equipment, medical instrumentation, and IoT edge nodes. The combination of Ethernet, CAN, and USB makes it well suited to gateway and protocol-conversion designs. When designing with this MCU, pay close attention to the VCAP decoupling capacitors, the 25 MHz HSE crystal layout, and the power sequencing of VDD, VDDA, and VBAT rails. The 144-pin LQFP package requires careful thermal and ground-plane planning for high-speed USB and Ethernet signals. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, second-sourcing, and layout decisions.

USD $11.84 有现货

STM32F750N8H6

STM32F750N8H6 - Cortex-M7 MCU 64KB Flash 216MHz | STMicroelectronics

The STMicroelectronics STM32F750N8H6 is an Arm Cortex-M7 32-bit RISC microcontroller operating at up to 216 MHz, with 64 KB of Flash, 320 KB SRAM, and a single-precision Floating Point Unit. Housed in a 216-pin TFBGA (H6 suffix) package, this STM32F750x8-line device combines high-performance DSP and FPU capability with a Chrom-ART accelerator, peripherals including USB OTG HS/FS, CAN, LCD-TFT, and a camera interface. An Arm Cortex-M7 MCU is a 32-bit microcontroller core designed for high-performance embedded applications, featuring a superscalar pipeline, single-precision floating-point and DSP instructions, and an integrated MPU. The STM32F750 family targets human-machine interface, motor control, and audio applications where deterministic real-time performance, rich connectivity, and large SRAM buffers are required within a low-power envelope. Key features include 216 MHz fCPU with 462 DMIPS, 64 KB Flash with ART Accelerator (zero wait-state execution from Flash), 340 KB total SRAM (320 + 16 + 4 KB), Chrom-ART graphics accelerator for 2D DMA2D, 12-bit ADC up to 2.4 MSPS, two 12-bit DACs, USB OTG Full-Speed and High-Speed with dedicated PHY, two CAN 2.0B interfaces, SDMMC host, and a TFT-LCD controller with dedicated pixel clock. Operating voltage ranges from 1.8 V to 3.6 V. The Cortex-M7 core integrates a double-precision FPU and tightly-coupled memory to deliver deterministic interrupt latency under 20 ns, enabling precise motor-control loops and high-fidelity digital signal processing. The integrated Chrom-ART Accelerator offloads 2D operations from the CPU, freeing cycles for application code while sustaining pixel throughput to a TFT display without CPU intervention. Typical applications include TFT-LCD HMI panels, industrial motor drives, audio processing (MP3/WMA codecs, audio DAC control), point-of-sale terminals, and PLC controllers. The USB OTG HS and CAN 2.0B ports enable connectivity-rich gateways, while the dedicated camera interface and SRAM headroom are well suited to basic image processing. A primary design consideration is power rail sequencing: the MCU integrates a Power-on Reset and brown-out detector that requires VDD to reach the minimum operating threshold before any I/O is driven. Designers should also budget for the external 25 MHz HSE crystal plus 32.768 kHz LSE, since internal HSI alone is too inaccurate for USB and CAN operation in production designs. This page synthesizes distributor pricing from Mouser and LCSC, parametric comparison against same-family STM32F750/F746 variants, and practical layout notes not found in the STM32F750x8 datasheet.

USD $7.10 有现货

STM32F756BGT6

STM32F756BGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics

The STM32F756BGT6 is a high-performance 32-bit microcontroller from STMicroelectronics, based on the Arm® Cortex®-M7 core with DSP and FPU instructions. It operates at up to 216 MHz, providing exceptional computational throughput for demanding embedded applications. The device integrates 1 Mbyte of Flash memory and 320 Kbytes of SRAM, along with a comprehensive set of peripherals including multiple communication interfaces, analog-to-digital converters, and advanced motor control timers. Housed in a 208-pin LQFP package (28x28 mm), it offers extensive I/O capabilities for complex system integration. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals on a single chip. The STM32F756BGT6 belongs to the STM32F7 series, which is part of the broader STM32 family of 32-bit Arm Cortex-M microcontrollers. This family is widely used in industrial control, consumer electronics, and IoT devices due to its balance of performance, power efficiency, and peripheral richness. The Cortex-M7 core is a high-performance member of the Cortex-M family, featuring a six-stage superscalar pipeline and optional double-precision floating-point unit, making it suitable for applications requiring significant digital signal processing. Key features of the STM32F756BGT6 include a 216 MHz CPU with 2.14 CoreMark/MHz, a Chrom-ART Accelerator for 2D graphics, a hardware cryptographic processor supporting AES, 3DES, and RSA, and a true random number generator. It also provides a camera interface, an LCD-TFT controller, and a wide range of communication peripherals including Ethernet, USB OTG HS/FS, CAN, SPI, I2C, USART, and SAI. The device supports a supply voltage range of 1.8V to 3.6V and operates over a temperature range of -40°C to +85°C. From a technical architecture perspective, the STM32F756BGT6 integrates an advanced memory protection unit (MPU), a direct memory access (DMA) controller with up to 16 streams, and a flexible static memory controller (FMC) for external memory expansion. The device also features a 12-bit ADC with up to 24 channels, a 12-bit DAC, and multiple 16-bit and 32-bit timers. The inclusion of a true random number generator and cryptographic acceleration makes it suitable for secure communication applications. Typical applications for the STM32F756BGT6 include industrial automation and control systems, motor drives, power conversion, medical devices, and high-end consumer electronics such as smart home hubs and audio equipment. Its high processing power and rich peripheral set enable complex real-time control and signal processing tasks. When designing with this device, careful attention should be paid to power supply decoupling, with a 100nF capacitor placed close to each power pin and a 4.7uF bulk capacitor on the main supply. The LQFP-208 package requires proper thermal management, and the exposed pad should be connected to ground with adequate vias for heat dissipation.

USD $15.86 有现货

STM32F756VGT6

STM32F756VGT6 - 32-bit ARM Cortex-M7 MCU, 1MB Flash | STMicroelectronics

The STM32F756VGT6 is a high-performance 32-bit microcontroller from STMicroelectronics, based on the ARM Cortex-M7 core running at up to 216 MHz. It integrates 1 MB of flash memory and 320 KB of SRAM, along with a rich set of peripherals including a TFT-LCD controller, camera interface, cryptographic acceleration, and multiple communication interfaces. The device is housed in a 100-pin LQFP package (LQFP100) and operates over a temperature range of -40°C to +85°C. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the brains of countless electronic devices, from automotive engine control units to IoT sensors and industrial automation systems. The STM32F756VGT6 belongs to the STM32F7 series, which is positioned as a high-performance MCU family within the broader STM32 ecosystem, offering a balance of processing power, connectivity, and advanced security features. Key features of the STM32F756VGT6 include a 216 MHz ARM Cortex-M7 core with double-precision floating-point unit (FPU), 1 MB of flash memory, 320 KB of SRAM, and a comprehensive set of peripherals. It supports a TFT-LCD controller with up to XGA resolution, a camera interface, and hardware cryptographic acceleration (AES, DES, 3DES, SHA-1, SHA-256, and true random number generator). The device also includes a 12-bit ADC, 12-bit DAC, multiple timers, and a wide range of communication interfaces such as USART, SPI, I2C, CAN, USB OTG HS/FS, Ethernet MAC, and SDMMC. From a technical depth perspective, the STM32F756VGT6 leverages the ARM Cortex-M7 architecture, which features a 6-stage pipeline and a branch prediction unit, enabling efficient execution of complex algorithms. The inclusion of a double-precision FPU accelerates floating-point math, making it suitable for digital signal processing (DSP) and motor control applications. The device also incorporates a memory protection unit (MPU) and a cache controller (I-Cache and D-Cache) to optimize performance and reliability. The cryptographic hardware accelerator offloads encryption/decryption tasks from the CPU, enhancing security and throughput. Typical applications for the STM32F756VGT6 include industrial automation, motor control, IoT gateways, smart home devices, medical equipment, and high-end consumer electronics. Its combination of processing power, connectivity, and security features makes it ideal for applications requiring real-time control, advanced user interfaces, and secure data communication. For instance, in an IoT gateway, the STM32F756VGT6 can manage multiple communication protocols (Ethernet, USB, CAN) while running a real-time operating system (RTOS) and handling cryptographic operations for secure cloud connectivity. When designing with the STM32F756VGT6, ensure proper power supply decoupling with 100 nF capacitors close to each VDD pin and a 4.7 µF bulk capacitor. The device requires a 3.3V supply, and the internal regulator can be configured to 1.2V for the core. Pay attention to the VDDA pin for analog peripherals, which should be filtered with a ferrite bead and capacitor. For high-speed interfaces like USB and Ethernet, follow the layout guidelines in the STM32F7 reference manual (RM0385) to maintain signal integrity.

USD $16.95 有现货

STM32F756ZGT6

STM32F756ZGT6 - 32-bit ARM Cortex-M7 MCU 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F756ZGT6 is a high-performance 32-bit microcontroller based on the ARM Cortex-M7 core, operating at up to 216 MHz. It integrates 1 MB of Flash memory and 320 KB of SRAM, along with a comprehensive set of peripherals including Ethernet MAC, USB OTG HS/FS, camera interface, and multiple communication interfaces. The device is housed in a 144-pin LQFP package (LQFP144) with a 20x20 mm body, making it suitable for a wide range of industrial, consumer, and IoT applications. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the brain of embedded systems, executing firmware to control devices, process sensor data, and communicate with other systems. In the hierarchy of computing devices, a microcontroller falls under embedded processors, which are a subset of semiconductor devices. The STM32F7 series represents the high-performance tier of ST's STM32 family, offering the ARM Cortex-M7 core with DSP and FPU instructions for advanced signal processing and control. Key features of the STM32F756ZGT6 include a 216 MHz ARM Cortex-M7 core with double-precision FPU and DSP instructions, 1 MB of Flash memory, 320 KB of SRAM, and a Chrom-ART Accelerator for enhanced graphics performance. It supports a wide range of communication interfaces: 4x USART, 4x UART, 6x SPI, 3x I2C, 2x CAN, 1x SDMMC, 1x Ethernet MAC, 1x USB OTG HS, 1x USB OTG FS, and 1x camera interface. The device also features a 12-bit ADC with up to 24 channels, a 12-bit DAC with 2 channels, and multiple timers including advanced-control timers. The operating voltage range is 1.7V to 3.6V, and the temperature range is -40°C to +85°C (T suffix). The STM32F756ZGT6 is built on ST's advanced 90nm process technology, enabling high performance with low power consumption. The Cortex-M7 core with 6-stage pipeline and branch prediction delivers 2.14 CoreMark/MHz, making it one of the fastest MCUs in its class. The device includes a memory protection unit (MPU), a direct memory access (DMA) controller with 16 streams, and a true random number generator (TRNG) for security applications. The Chrom-ART Accelerator offloads 2D graphics operations from the CPU, improving GUI performance in display applications. Typical applications include industrial control systems, motor drives, power conversion, IoT gateways, audio processing, and human-machine interfaces (HMI). The Ethernet MAC with IEEE 1588 support enables precise time synchronization in networked industrial systems. The camera interface supports parallel camera sensors for machine vision applications. The USB OTG HS with internal PHY allows high-speed data transfer in portable devices. When designing with this device, ensure adequate decoupling on all power supply pins (VDD, VDDA, VDDUSB) with 100nF and 4.7uF capacitors. The VCAP pins require a 2.2uF capacitor for internal regulator stability. For high-speed interfaces like Ethernet and USB, follow the layout guidelines in the datasheet to maintain signal integrity. The device supports multiple boot modes via BOOT0 and BOOT1 pins, which must be configured correctly for firmware programming.

USD $8.10 有现货

STM32F765IGK6

STM32F765IGK6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F765IGK6 is a high-performance 32-bit Arm Cortex-M7 microcontroller with single-precision and double-precision FPU, ART Accelerator and 16 Kbytes of I/D-cache, delivering up to 216 MHz core frequency in a 176+25 UFBGA (10x10 mm) package. It integrates 1 Mbyte of embedded Flash and 512 Kbytes of SRAM, achieves 462 DMIPS / 2.14 DMIPS/MHz (Dhrystone 2.1), and supports DSP instructions plus a memory protection unit (MPU). The 0-wait-state execution from both internal flash and external memories makes it suitable for deterministic real-time workloads. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory, data memory, and programmable peripherals. The STM32F765IGK6 belongs to the high-performance Cortex-M7 class of MCUs, which sits above Cortex-M4 devices in the Arm Cortex-M taxonomy and below Cortex-A application processors. Within STMicroelectronics' portfolio, the STM32F7 family is positioned as the high-performance mainstream line between the STM32F4 mainstream line and the STM32H7 very-high-performance line, and is widely used as the controller host for graphics, motor control, audio, and connectivity-rich embedded systems. Key differentiating features include a 16-bit Chrom-ART Accelerator for graphics workloads, dual-mode Quad-SPI flash interface, USB 2.0 OTG full-speed and high-speed with on-chip PHY, two CAN 2.0B interfaces, SDMMC, FMC for external memory, Ethernet MAC, three 12-bit ADCs (2.4 MSPS), two 12-bit DACs, and a crypto/hash hardware accelerator supporting AES, SHA, and 3DES. The integrated L1 cache plus ART Accelerator effectively eliminates the flash wait-state penalty even at 216 MHz. Architecturally the device uses an M7 core with branch prediction, tightly-coupled memory, and a dedicated DMA engine cluster (two DMA controllers with FIFOs). An on-chip DSI host controller and parallel TFT LCD interface give the STM32F765IGK6 strong graphics capability for display-driven HMI designs without an external graphics controller. The wide peripheral set (UART/USART, SPI, I2C, SAI, SPDIF, HDMI-CEC, timers, RTC) covers most industrial, audio, and connectivity bridges. Typical applications include industrial motor drives and frequency inverters, building automation HVAC controllers, medical imaging interfaces, audio processing and consumer audio equipment, DSI-equipped HMI panels, USB-based industrial bridges, and graphics-rich IoT gateways. The 176-ball UFBGA package footprint is shared across the STM32F7 family, enabling drop-in scalability between STM32F765, STM32F767, and STM32F769 density variants. When designing with this part, verify that the 216 MHz core supply (typically 1.7-1.9 V from the internal LDO or external SMPS) is decoupled with low-impedance ceramic caps near each VDD/VSS pair. For high-EMI environments, gate the 25 MHz HSE crystal traces with a guard ring and use the on-chip PLL spread-spectrum option to relax radiated emissions. This page synthesizes real-time distributor pricing, drop-in pin-compatible alternatives, application notes, and design considerations beyond the manufacturer datasheet summary, helping engineers evaluate the STM32F765IGK6 for new designs and as a second-source-qualified replacement.

USD $9.10 有现货

STM32F765IGT6

STM32F765IGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F765IGT6 is a high-performance 32-bit ARM Cortex-M7 microcontroller with FPU, operating at up to 216 MHz and delivering 462 DMIPS / 1082 CoreMark, packaged in a 176-pin LQFP (24x24 mm) and integrating 1 MB of Flash and 512 KB of SRAM. Key features include a single-precision and double-precision FPU, L1 cache (16 KB I-cache + 16 KB D-cache), ART Accelerator for flash execution, a Chrom-ART accelerator for 2D graphics, and a JPEG codec. The device integrates extensive connectivity peripherals including three USB 2.0 OTG ports (one with HS PHY), two CAN 2.0B interfaces, an IEEE 802.3-compliant 10/100 Ethernet MAC with dedicated DMA, three I2S interfaces, six SPI ports, and SDMMC support, making it suitable for networked embedded and multimedia applications. The STM32F765 belongs to the Cortex-M7-based STM32F7 family, which targets high-performance embedded applications above the Cortex-M4 tier. Compared with Cortex-M4, the Cortex-M7 superscalar core adds branch prediction, SIMD instructions, and tightly-coupled L1 caches, achieving roughly 2x Dhrystone performance per MHz. The F765 position relative to its siblings F767/F769 brings graphics (Chrom-ART, LTDC, JPEG), Ethernet, USB HS, and DSI while keeping the cost-effective LQFP-176 rather than the higher-pin-count BGA packages. Memory architecture: 1 MB of dual-bank Flash with read-while-write support enables firmware upgrades without downtime, and 512 KB of SRAM is split into 368 KB of general-purpose SRAM plus dedicated 16 KB instruction TCM and 16 KB data TCM for time-critical code. Peripherals include three 12-bit ADCs at 2.4 MSPS each, two 12-bit DACs, multiple timers including HRTIM for power conversion, a 32-bit RTC, and AES-256 + True Random Number Generator hardware cryptography. Typical applications include industrial motor-control and fieldbus nodes, networked gateways and IoT edge devices, graphical HMI panels, audio processing, and high-speed data acquisition. The integrated Ethernet MAC with dedicated DMA enables deterministic real-time networking, while the USB HS PHY simplifies data-loading designs. Design consideration: decoupling is critical - place one 100 nF ceramic per VDD/VDDA pin pair as close as possible, and provide a 4.7 uF bulk capacitor near the regulator. Configure the BOOT0 pin via a 10 kohm pull-down plus a small capacitor to ground to filter transient glitches. This page synthesizes distributor pricing, verified drop-in alternatives within the LQFP-176 family, and field-ready design notes not found on a single datasheet page.

USD $13.10 有现货

STM32F765VIH6

STM32F765VIH6 - 216MHz Cortex-M7 MCU 2MB Flash | ST

The STMicroelectronics STM32F765VIH6 is a high-performance 32-bit microcontroller based on the Arm Cortex-M7 core operating at up to 216 MHz, with 2 MB of Flash memory, 462 DMIPS of processing performance, and an 8x8 mm 100-ball TFBGA package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals onto one die, serving as the computational heart of embedded systems. Within the system hierarchy, the STM32F765 belongs to the STM32F7 Series of high-performance MCUs, which sits above mainstream Cortex-M4 families and below multicore application processors, making it the workhorse choice for demanding real-time embedded control. Key features include the Arm Cortex-M7 core with double-precision FPU and Armv7E-M DSP instructions, the adaptive real-time (Art) memory accelerator that achieves 0-wait-state execution from Flash at 216 MHz, and L1 instruction and data caches that maximize performance from external memory. Peripherals include SDRAM interface support, DFSDM (digital filter for sigma-delta modulators), multiple high-speed communication interfaces, and advanced analog blocks suitable for motor control and digital power. Architecturally, the Art Accelerator and 16-Kbyte L1 instruction cache allow the Cortex-M7 to sustain its full 1082 CoreMark/MHz-class throughput even when fetching from on-chip Flash, a key differentiator from earlier Cortex-M families that required SRAM execution for peak performance. The double-precision FPU accelerates scientific and signal-processing math natively without software emulation. Typical applications include industrial motor drives and digital power conversion (leveraging DFSDM and high-resolution timers), medical and test instrumentation requiring 216 MHz DSP throughput, and high-end consumer devices with graphical displays driven via SDRAM and LCD interfaces. A key design consideration: the TFBGA package demands careful PCB design with controlled-impedance fanout, and the low core voltage is generated by an embedded regulator, so follow ST layout guidelines for VCAP capacitors and decoupling. This page synthesizes distributor pricing, verified drop-in alternatives, design guidance, and application notes not consolidated in the manufacturer datasheet.

USD $9.90 有现货

STM32F765VIT6

STM32F765VIT6 - 2MB Flash, 512KB RAM Cortex-M7 MCU | STMicroelectronics

The STM32F765VIT6 is a high-performance 32-bit microcontroller from STMicroelectronics based on the ARM Cortex-M7 core, operating at up to 216 MHz. It features 2 MB of Flash memory and 512 KB of SRAM, making it suitable for complex applications requiring substantial code and data storage. The device is housed in a 100-pin LQFP package (LQFP100) and supports a wide supply voltage range of 1.7V to 3.6V. Data verified as of 2026-08-05. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It integrates a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. In the system hierarchy, the STM32F765VIT6 is a microcontroller -> embedded processor -> integrated circuit -> semiconductor. This MCU family is part of the STM32F7 series, which is positioned as a high-performance line within the broader STM32 ecosystem, offering a balance of processing power, memory, and peripheral integration for industrial, consumer, and IoT applications. Key features include a 216 MHz ARM Cortex-M7 core with double-precision FPU, 2 MB of dual-bank Flash, 512 KB of SRAM, and a comprehensive set of peripherals: multiple 12-bit ADCs, DACs, timers, USARTs, SPIs, I2Cs, USB OTG HS/FS, Ethernet MAC, camera interface, and cryptographic acceleration. The device also includes a Chrom-ART Accelerator for 2D graphics and a TFT LCD controller, enabling rich user interfaces. The Cortex-M7 core delivers 7 CoreMark/MHz, providing high computational throughput for DSP and control applications. Technically, the STM32F765VIT6 is built on a 40nm process technology, offering low power consumption with multiple low-power modes (Sleep, Stop, Standby). It includes a memory protection unit (MPU), a cache (I-Cache and D-Cache) to optimize performance, and a flexible memory controller (FMC) for external memory expansion. The device supports a wide range of communication interfaces, making it a versatile choice for connectivity-centric designs. Typical applications include industrial control systems, motor drives, power conversion, IoT gateways, audio processing, and advanced human-machine interfaces (HMI). The combination of high clock speed, large memory, and rich peripherals makes it ideal for applications requiring real-time processing and connectivity. When designing with this MCU, pay attention to power supply decoupling: place a 100nF capacitor close to each VDD pin and a 4.7uF capacitor at the main supply. Also, ensure proper layout for the high-speed USB and Ethernet interfaces to maintain signal integrity. The device supports in-circuit programming and debugging via SWD and JTAG, facilitating development. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the ST datasheet, providing a comprehensive resource for engineers evaluating the STM32F765VIT6.

USD $10.37 有现货

STM32F765ZGT6

STM32F765ZGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F765ZGT6 is a high-performance 32-bit ARM Cortex-M7 microcontroller with double-precision FPU, operating at up to 216 MHz, integrating 1 MB of Flash memory and 384 KB of SRAM in a 144-pin LQFP package (20x20 mm). It delivers 462 DMIPS (2.14 DMIPS/MHz, Dhrystone 2.1) and supports DSP instructions with single-precision floating point, plus a memory protection unit (MPU) for robust embedded designs. A microcontroller (MCU) is a single-chip embedded computer that combines a processor core, on-chip memory, and programmable peripherals, sitting at the heart of nearly every modern electronic system. Within the component taxonomy, the STM32F765ZGT6 belongs to the STM32F7 series of 32-bit Flash MCUs, which falls under the broader STM32 family and the ARM Cortex-M ecosystem, serving industrial, consumer, and medical applications that demand more compute headroom than Cortex-M4 devices can deliver. The Cortex-M7 in turn inherits from ARM's Cortex-M processor lineage, while MCU itself is a hypernym of microprocessor. Key differentiating features include the Adaptive Real-Time (ART) Accelerator with 16 Kbytes I/D L1 cache enabling 0-wait-state execution from embedded Flash, the Chrom-ART Accelerator (DMA2D) that offloads 2D graphics work, and a rich peripheral set including multiple 12-bit ADCs, DACs, advanced timers, USART/UART, SPI, I2C, CAN, USB OTG full-speed/high-speed, an Ethernet MAC with IEEE 1588 support, and a camera interface. A flexible external memory controller (FMC) supports SDRAM, SRAM, and NOR/NAND Flash for large frame buffers. Technically, the Cortex-M7 6-stage pipeline with branch prediction and dual-issue capability sustains high throughput even under interrupt load, while the integrated FPU accelerates signal-processing tasks. Supply range is 1.7V to 3.6V with operation from -40C to +85C ambient for the STM32F765ZGT6 industrial grade, and the part supports Sleep, Stop, and Standby low-power modes. Typical applications include industrial automation (PLCs, motor control), human-machine interfaces with graphical TFT displays, IoT gateways where the Ethernet MAC enables precise IEEE 1588 time synchronization, and audio processing using the DSP extensions. The wide peripheral set also suits building automation, point-of-sale terminals, and medical instrumentation. Design-wise, place 100nF decoupling capacitors on each VDD pin and a 4.7uF bulk cap on the main supply, follow ST's reference layout for the HSE crystal and VREF+ analog domain, and exploit the low-power modes for battery-sensitive designs. This page synthesizes distributor pricing, drop-in alternatives, FAQ answers, and practical design notes not found in the manufacturer datasheet, with pricing as of 2026-10-10.

USD $13.62 有现货

STM32F765ZIT6

STM32F765ZIT6 - 216MHz Cortex-M7 MCU, 2MB Flash, LQFP-144 | STMicroelectronics

The STMicroelectronics STM32F765ZIT6 is a high-performance 32-bit Arm Cortex-M7 microcontroller operating at up to 216 MHz, packaged in a 144-pin LQFP with 2 MB of embedded Flash and 512 KB of SRAM. It integrates a double-precision FPU, DSP instructions, and a 16-Kbyte I-cache plus 16-Kbyte D-cache, enabling 0-wait-state execution from Flash at full 216 MHz speed and delivering up to 462 DMIPS (2.14 DMIPS/MHz). The LQFP-144 footprint also exposes the full set of high-speed peripherals required for graphics, Ethernet, and USB 2.0 HS workloads. An MCU (Microcontroller Unit) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, and a rich set of peripherals such as timers, ADCs, and communication interfaces. The STM32F7 family sits at the high-performance end of the Cortex-M hierarchy — Cortex-M7 > Cortex-M4 > Cortex-M3 > Cortex-M0 — and is a member of the broader Arm Cortex-M MCU taxonomy under embedded microcontrollers, semiconductor devices, and integrated circuits. Within ST's portfolio, the F7 line bridges Cortex-M4-class parts (such as the STM32F4 series) and Cortex-M7 application processors. Key features include up to 17 timers (including motor-control, HRTIM, and 32-bit timers), two 12-bit ADCs sampling at 2.4 MSPS, two 12-bit DACs, a true random number generator (RNG), cryptographic accelerators, and a Chrom-ART accelerator for offloading GUI rendering. An integrated 2.4-inch TFT-LCD controller (LTDC) supports up to XGA resolution without an external graphics chip, while USB 2.0 High-Speed with on-chip PHY and 10/100 Ethernet with IEEE 1588 make the part attractive for connected embedded designs. Architecturally, the Cortex-M7 core pairs a 6-stage superscalar pipeline with branch prediction and tightly-coupled memory for deterministic interrupt response. The 2 MB of dual-bank Flash supports read-while-write for safe in-field firmware upgrades, and the 512 KB SRAM is split into multiple AHB-matrix regions for simultaneous DMA and CPU access. This bandwidth is what allows driving parallel TFT displays while running DSP-style audio or motor-control loops concurrently. Typical applications include industrial HMI panels with TFT-LCD touchscreens, motor-control and field-oriented control drives, industrial Ethernet gateways, USB audio interfaces, and barcode/scanner modules. Specific uses range from PLC operator panels to medical instrumentation front-ends and office printers requiring raster image processing. When PCB area is constrained, designers often migrate to the LQFP-100 or LQFP-176 versions of the same silicon, but the ZIT6 in LQFP-144 maximizes peripheral exposure without stepping up to a BGA. For power-supply design, the part requires a 1.8V to 3.6V supply with decoupling on every VDD/VBAT pin; bypassing must keep PCB track inductance below roughly 1 nH to avoid noise coupling into the PLL. Trade-off: peak performance at 216 MHz pushes core current beyond 100 mA, so efficiency-aware designs often drop to 180 MHz when full throughput is not required. This page synthesizes distributor pricing, same-package drop-in alternatives from across the STM32 family, and design notes not contained in a single manufacturer datasheet.

USD $10.95 有现货

STM32F765ZIT7

STM32F765ZIT7 - 216MHz Cortex-M7 MCU, 2MB Flash, 144-LQFP | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F765ZIT7 is a high-performance ARM Cortex-M7 32-bit RISC microcontroller with FPU, operating at up to 216 MHz and delivering 462 DMIPS of compute throughput, housed in a 144-pin LQFP (20x20 mm) package. It integrates 2 MB of embedded Flash and 512+16+4 KB of SRAM, plus an extensive set of high-speed peripherals including USB OTG HS/FS, two CAN 2.0B interfaces, an LCD-TFT controller, an MIPI-DSI host, and a hardware cryptographic accelerator suite. The 'I' suffix denotes the industrial-grade (-40C to +85C) operating range, and 'TR' designates Tape & Reel packaging. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable I/O peripherals. The Cortex-M7 is ARM's highest-performance Cortex-M core, featuring a six-stage superscalar pipeline, branch prediction, and an integrated single-precision floating-point unit; it sits at the top of the Cortex-M family alongside the Cortex-M4 and Cortex-M33. STM32F7-series MCUs belong to the broader ARM Cortex-M taxonomy, which itself falls under 32-bit RISC microcontrollers and, more generally, embedded microprocessors and semiconductor ICs. Compared with Cortex-M4 parts, the Cortex-M7 offers roughly doubled DSP performance and is aimed at demanding signal-processing and graphics workloads. Key features that distinguish this part include the dual-bank 2 MB Flash with ART Accelerator for zero-wait-state execution from Flash, 16-bit and 32-bit timers, up to 28 communication interfaces (USART/UART/SPI/I2S/I2C), a 12-bit ADC reaching 2.4 MSPS, two 12-bit DACs, an SDMMC host interface for external SD cards or eMMC, and an Ethernet MAC with dedicated DMA. The integrated cryptographic accelerator (AES-256, SHA-1/SHA-2, HMAC, and TRNG) enables hardware-bound secure boot and TLS/SSL offload. The Chrom-ART Accelerator 2D DMA engine accelerates bitmap operations for HMI applications. Typical applications include industrial motor drives and PLCs, medical patient-monitoring and diagnostic equipment, human-machine interface (HMI) panels with TFT-LCD or DSI displays, factory-automation controllers with EtherCAT/PROFINET bridges, point-of-sale terminals, building-automation gateways, and audio-processing units including USB audio class endpoints. The 216 MHz Cortex-M7 with single-precision FPU and DSP extensions makes the part particularly suited to real-time FFT-based analytics, digital filtering, and motor-control algorithms using FOC (field-oriented control). Pin-compatible upgrades within the STM32F765 family extend to the STM32F767/F769 line for projects that need additional MIPI-DSI lanes or the SPDIF interface. When designing with this MCU, attention must be paid to decoupling (1 uF + 100 nF near each VDD pin), the layout of the 25 MHz HSE crystal traces within 5 mm of the OSC_IN/OSC_OUT pins, and the thermal dissipation in continuous high-CPU-load scenarios. The 144-LQFP package has a thermal resistance of approximately 38 C/W (theta_JA on a 4-layer JEDEC board) and is adequate for industrial operating points up to about 0.8 W steady-state dissipation without airflow. This page synthesizes 144-LQFP same-package drop-in alternatives, distributor pricing tiers, and practical design notes not found in a single source.

USD $24.85 有现货

STM32F765ZIT7TR

STM32F765ZIT7TR - 216MHz Cortex-M7 MCU, 2MB Flash, 144-LQFP | STMicroelectronics

The STMicroelectronics STM32F765ZIT7TR is a high-performance ARM Cortex-M7 32-bit RISC microcontroller with FPU, operating at up to 216 MHz and delivering 462 DMIPS of compute throughput, housed in a 144-pin LQFP (20x20 mm) package. It integrates 2 MB of embedded Flash and 512+16+4 KB of SRAM, plus an extensive set of high-speed peripherals including USB OTG HS/FS, two CAN 2.0B interfaces, an LCD-TFT controller, an MIPI-DSI host, and a hardware cryptographic accelerator suite. The 'I' suffix denotes the industrial-grade (-40C to +85C) operating range, and 'TR' designates Tape & Reel packaging. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable I/O peripherals. The Cortex-M7 is ARM's highest-performance Cortex-M core, featuring a six-stage superscalar pipeline, branch prediction, and an integrated single-precision floating-point unit; it sits at the top of the Cortex-M family alongside the Cortex-M4 and Cortex-M33. STM32F7-series MCUs belong to the broader ARM Cortex-M taxonomy, which itself falls under 32-bit RISC microcontrollers and, more generally, embedded microprocessors and semiconductor ICs. Compared with Cortex-M4 parts, the Cortex-M7 offers roughly doubled DSP performance and is aimed at demanding signal-processing and graphics workloads. Key features that distinguish this part include the dual-bank 2 MB Flash with ART Accelerator for zero-wait-state execution from Flash, 16-bit and 32-bit timers, up to 28 communication interfaces (USART/UART/SPI/I2S/I2C), a 12-bit ADC reaching 2.4 MSPS, two 12-bit DACs, an SDMMC host interface for external SD cards or eMMC, and an Ethernet MAC with dedicated DMA. The integrated cryptographic accelerator (AES-256, SHA-1/SHA-2, HMAC, and TRNG) enables hardware-bound secure boot and TLS/SSL offload. The Chrom-ART Accelerator 2D DMA engine accelerates bitmap operations for HMI applications. Typical applications include industrial motor drives and PLCs, medical patient-monitoring and diagnostic equipment, human-machine interface (HMI) panels with TFT-LCD or DSI displays, factory-automation controllers with EtherCAT/PROFINET bridges, point-of-sale terminals, building-automation gateways, and audio-processing units including USB audio class endpoints. The 216 MHz Cortex-M7 with single-precision FPU and DSP extensions makes the part particularly suited to real-time FFT-based analytics, digital filtering, and motor-control algorithms using FOC (field-oriented control). Pin-compatible upgrades within the STM32F765 family extend to the STM32F767/F769 line for projects that need additional MIPI-DSI lanes or the SPDIF interface. When designing with this MCU, attention must be paid to decoupling (1 uF + 100 nF near each VDD pin), the layout of the 25 MHz HSE crystal traces within 5 mm of the OSC_IN/OSC_OUT pins, and the thermal dissipation in continuous high-CPU-load scenarios. The 144-LQFP package has a thermal resistance of approximately 38 C/W (theta_JA on a 4-layer JEDEC board) and is adequate for industrial operating points up to about 0.8 W steady-state dissipation without airflow. This page synthesizes 144-LQFP same-package drop-in alternatives, distributor pricing tiers, and practical design notes not found in a single source.

USD $24.85 有现货

STM32F767BGT6

STM32F767BGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics

The STM32F767BGT6 is a high-performance 32-bit microcontroller from STMicroelectronics, built around the Arm® Cortex®-M7 core with a floating-point unit (FPU) and digital signal processing (DSP) instructions. Operating at up to 216 MHz, it delivers 462 DMIPS, making it suitable for demanding embedded applications. The device integrates 1 MB of flash memory and 512 KB of SRAM, along with a rich set of peripherals including USB OTG HS/FS, multiple communication interfaces, an LCD controller, and a DSI host. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals on a single chip. The STM32F7 series sits at the high-performance end of the STM32 portfolio, positioned above the mainstream F4 series and below the application processors in the STM32MP1 line. This hierarchy places the STM32F767BGT6 as a top-tier MCU for applications requiring significant compute power and connectivity. Key features include a 216 MHz Arm Cortex-M7 core with double-precision FPU, 1 MB of flash memory, 512 KB of SRAM, and a comprehensive set of peripherals. The device supports a wide range of communication interfaces, including USB OTG HS/FS, Ethernet, multiple USARTs, SPIs, I2Cs, and CAN. It also features an LCD-TFT controller and a DSI host, enabling direct connection to displays. The STM32F767BGT6 is available in a 208-pin LQFP package (28x28 mm), providing ample I/O for complex designs. The STM32F767BGT6 leverages the Arm Cortex-M7 architecture, which includes a 6-stage pipeline, branch prediction, and a memory protection unit (MPU). The FPU supports both single and double precision, accelerating mathematical operations for signal processing and control algorithms. The device also includes a Chrom-ART Accelerator™ for 2D graphics, offloading the CPU for graphical user interfaces. With its high clock speed and advanced peripherals, the STM32F767BGT6 excels in applications such as industrial control, motor control, audio processing, and human-machine interfaces. Typical applications include high-end industrial automation, robotics, audio processing, and advanced human-machine interfaces. The device's high performance and rich peripheral set make it ideal for applications requiring real-time control and complex user interfaces. For example, in industrial automation, the STM32F767BGT6 can handle multiple communication protocols simultaneously while executing complex control algorithms. When designing with the STM32F767BGT6, ensure adequate power supply decoupling with 100 nF capacitors close to each power pin and a bulk capacitor. The device supports a wide supply voltage range of 1.7V to 3.6V, allowing flexible power design. For high-speed communication interfaces, pay attention to PCB layout to maintain signal integrity.

USD $11.55 有现货

STM32F767BIT6

STM32F767BIT6 - ARM Cortex-M7 MCU, 2MB Flash, 216MHz | STMicroelectronics

The STMicroelectronics STM32F767BIT6 is a high-performance 32-bit ARM Cortex-M7 microcontroller with FPU, 2 MB of embedded Flash and 512 KB of SRAM, integrated into a 208-pin LQFP (28x28 mm) package. Key headline specifications include a 216 MHz maximum CPU clock delivering 462 DMIPS (2.14 DMIPS/MHz, Dhrystone 2.1), DSP instructions and an ART Accelerator with 16 KB I/D L1 cache enabling zero-wait-state execution from Flash. The device integrates a Cryptography accelerator (AES-256, Hash, RNG) and an Embedded SDRAM controller supporting external SDRAM up to 32-bit wide. What is a Cortex-M7 MCU? An ARM Cortex-M7 microcontroller is a high-end 32-bit microcontroller core designed by Arm for deterministic real-time embedded systems. The Cortex-M7 belongs to the Cortex-M family and is positioned above Cortex-M4 by adding a double-precision FPU, single-precision floating-point pipeline, branch prediction, and tightly-coupled instruction/data caches. The STM32F7 line is part of ST's mainstream performance tier that also introduces MIPI-DSI display, USB Type-C / Power Delivery and a richer analog set over the F4 generation, making it suitable for industrial control, audio DSP, HMI graphics and motor-control loops. Key features of the STM32F767BIT6 include: up to 18 timer channels, three 12-bit ADC converters (up to 2.4 MSPS each), two 12-bit DACs, a USB 2.0 OTG full-speed/high-speed PHY, two CAN 2.0B controllers, an SDIO/MMC interface, a Quad-SPI flash interface and an LCD-TFT controller. The Cryptography block accelerates AES-256, SHA-1/SHA-2 hashing, and true RNG, easing secure-boot and TLS link setups. The 208-LQFP footprint routes out 162 GPIO pins plus a wide parallel-interface bus, sufficient for SDRAM + TFT display + Ethernet + USB Type-C concurrently. The architecture pairs a dual-issue FPU + DSP pipeline with ART Accelerator to minimise flash wait-states; combined with the 16 KB L1 cache, the device achieves 462 DMIPS at 216 MHz with deterministic interrupt latency of <30 ns typical. Cryptography hardware offloads AES, SHA-1/2 and RNG; this dramatically reduces CPU overhead in TLS handshakes compared to software-only implementations. Embedded SRAM is split into 384 KB DTCM + 128 KB SRAM + 4 KB backup SRAM, with the SDRAM controller extending external memory up to 32-bit wide for display or data buffers. Typical applications are industrial HMI panels, motor drives and servo controllers, USB-C PD chargers and audio DSP platforms. The combination of TFT-LCD controller + DMA2D + SDRAM controller + USB high-speed on-chip PHY makes the F767 a single-chip candidate for 4.3-inch touchscreen displays with secure field updates. When designing with this device the 1.7-3.6 V supply and an external 25 MHz HSE crystal (with optional LSE 32.768 kHz for RTC) must be provided. Decoupling follows ST AN4365 placement rules: 100 nF + 4.7 µF near each VDD/VSS pair, plus a dedicated 1 µF bulk for the USB OTG PHY rail. For SDRAM operation use layed-out matched length with VREF = VDD/2 and 50 Ω impedance; bypass VBAT with a 0.1 µF cap if no battery is fitted.

USD $11.85 有现货

STM32F767IGK6

STM32F767IGK6 - 216MHz Cortex-M7 MCU 1MB Flash 176+25UFBGA

The STMicroelectronics STM32F767IGK6 is a high-performance 32-bit ARM Cortex-M7 microcontroller with FPU and DSP instructions, operating at up to 216 MHz and delivering 462 DMIPS / 1082 CoreMark performance. It integrates 1 MB of Flash and 512 KB of SRAM in a 176+25-pin UFBGA (10x10 mm) package, with 140 I/O ports supporting a wide range of peripherals including Ethernet MAC, USB OTG, CAN, SDMMC, and three 12-bit ADCs. An ARM Cortex-M7 microcontroller belongs to the ARM Cortex-M processor family, designed for embedded real-time systems. The Cortex-M7 is the highest-performance member of this family, featuring a superscalar pipeline, branch prediction, single-precision and double-precision FPU, and dedicated DSP extensions (SIMD). These MCUs sit in the embedded processor hierarchy: microcontroller -> embedded processor -> semiconductor IC, and are used wherever deterministic real-time response, rich connectivity, and graphics/audio processing are required in a single chip. Key features include an integrated 216 MHz Cortex-M7 core with 16 KB I-cache and 16 KB D-cache for high-throughput execution, hardware JPEG codec, random number generator (TRNG), and crypto/hash peripherals supporting AES-256, SHA-256, and HMAC. Three 12-bit ADCs sample at 2.4 MSPS each, and the device also includes two 12-bit DACs, up to 18 timers, and an SDMMC interface for microSD card storage. The LQFP176/UFBGA176 family pinout supports display interfaces (LCD-TFT) and an 8- to 14-bit camera parallel interface. The architecture combines an AXI/AHB multilayer bus matrix with a dedicated Chrom-ART graphics accelerator, enabling efficient on-chip LTDC and DMA2D operations without burdening the CPU. This makes the STM32F767IGK6 suitable for human-machine interfaces (HMI), where the CPU remains free for application logic while the accelerator handles pixel rendering. Typical applications include industrial HMI panels with TFT LCD touchscreens, motor-control inverter boards, building-automation gateways with Ethernet connectivity, point-of-sale and barcode-scanner terminals, medical patient-monitoring front panels, and consumer audio products that need MP3/WMA decoding with on-the-fly graphics overlays. When designing with this part, ensure that the PCB's thermal copper pour covers the exposed pad of the UFBGA to meet the 216 MHz current demand; an inadequate thermal land will push the junction temperature above the 125 C limit during heavy DMA and graphics workloads. Use the STM32CubeMX tool to configure the GPIO/AF matrix, and pair the MCU with an external SDRAM when the on-chip 512 KB SRAM is insufficient for frame buffers. This page synthesises verified distributor pricing, same-family drop-in alternatives, and practical thermal/PCB layout notes not consolidated in the STMicroelectronics datasheet DM00273119 alone.

USD $14.05 有现货

STM32F767IIT6

STM32F767IIT6 - 216MHz Cortex-M7 MCU 2MB Flash | STMicroelectronics

The STMicroelectronics STM32F767IIT6 is a high-performance ARM Cortex-M7 32-bit RISC microcontroller operating at up to 216 MHz, packaged in a 176-pin LQFP (24x24 mm) and integrating 2 MB of Flash plus 512 KB of SRAM. According to the official datasheet, it delivers 462 DMIPS / 2.14 DMIPS/MHz (Dhrystone 2.1) and includes a single-precision FPU, 16 KB I/D L1 cache, and the ART Accelerator that enables 0-wait-state execution from embedded Flash. An ARM Cortex-M7 microcontroller (MCU) is a 32-bit processor core designed for high-performance, deterministic embedded applications such as motor control, audio processing, and industrial networking. The Cortex-M7 sits at the top of the Cortex-M family, above Cortex-M4/M33, in the broader taxonomy of microcontrollers -> embedded processors -> semiconductors. It adds dual-issue pipeline, tightly-coupled memory, and SIMD DSP instructions while retaining the deterministic interrupt response that made Cortex-M ubiquitous in real-time designs. Key features of the STM32F767IIT6 include integrated crypto/hash peripherals (AES, SHA, MD5, HMAC), a TFT LCD controller, a JPEG codec, two USB OTG controllers (FS + HS with PHY), two CAN 2.0B interfaces, an Ethernet MAC, an SDMMC interface, three I2C, six SPI (two with I2S), four USART plus two UART, and 12-bit ADC/DAC blocks. Chrom-ART (DMA2D) acceleration and the proprietary Chrom-GRC graphics functions simplify TFT GUI development. Architecturally, the part pairs the Cortex-M7 core with a multi-AHB bus matrix, dual-bank Flash for safe field updates, and a flexible low-power run/sleep/stop/standby/shutdown power profile. Internal regulators plus VBAT domain preserve RTC and backup registers during main-rail loss, and four PWM-capable 16-bit timers plus two 32-bit timers support complex motor-control or digital-power topologies. Typical applications include HMI panels with TFT LCD, industrial PLCs and inverters, audio processing and codec bridging, secure IoT gateways, and USB-based peripherals or test instruments. The wide peripheral mix makes it a single-chip solution for products that previously required an MPU plus external peripherals. When designing with this MCU, allocate PCB area for LQFP-176 fanout and provide bulk decoupling on each VDDS/VDD pair. Use ST's STM32CubeMX to generate pin mux and clock-tree configurations and validate trace routing for the parallel TFT interface if used. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes beyond the manufacturer datasheet, giving engineers a single reference for sourcing and design validation.

USD $11.95 有现货

STM32F767NIH6

STM32F767NIH6 - 32-bit ARM Cortex-M7 MCU, 2MB Flash, 216MHz | STMicroelectronics

The STMicroelectronics STM32F767NIH6 is a high-performance 32-bit microcontroller based on the Arm Cortex-M7 core with double-precision FPU, running at up to 216 MHz and achieving 462 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1), housed in a 216-pin TFBGA package (13x13 mm). It integrates 2 MB of Flash memory, 512 KB of SRAM, and a 16 Kbyte I/D cache enabling 0-wait-state execution from embedded Flash and external memories, plus DSP instructions and a Chrom-ART Accelerator for 2D graphics offload. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit that combines a processor core, on-chip memory (Flash and SRAM), and programmable I/O peripherals on a single die, intended to govern a specific operation in an embedded system. Microcontrollers are the backbone of embedded designs ranging from simple motor controllers to complex IoT gateways. The STM32F767NIH6 belongs to the STM32F7 series, a high-performance family within the broader STM32 ecosystem positioned for graphics-rich HMI, motor control, and audio processing where Cortex-M4 class performance is insufficient. Key features of the STM32F767NIH6 include 4x I2C, 4x USART, 4x UART, 6x SPI, 3x CAN, 2x USB OTG, 1x Ethernet MAC, 1x SDMMC, a 16-bit ADC at 3.6 MSPS, a 12-bit DAC, hardware AES/3DES/DES cryptographic engines, a true random number generator (TRNG), 159 I/O lines, a 32-bit external data bus, and a 26-bit address bus. The device also integrates a JPEG codec, DFSDM (digital filter for sigma-delta modulators), and a TFT LCD controller for direct display driving without external graphics RAM. Technically, the STM32F767NIH6 uses an ART Accelerator with branch prediction and a 6-stage pipeline to maintain 0-wait-state Flash access at full 216 MHz, while dual-bank Flash supports read-while-write firmware updates. The MPU, separate instruction and data caches, and DSP extensions allow real-time DSP workloads alongside control tasks. The device operates from 1.7V to 3.6V across -40C to +85C (industrial grade) and offers multiple low-power modes. Typical applications include industrial control systems, motor drives, IoT gateways, human-machine interfaces (HMIs) with TFT displays, audio processing, and high-end consumer electronics. The combination of 216 MHz performance, large memory, and rich peripherals makes it ideal for applications that demand real-time processing and connectivity. When designing with this MCU, ensure proper decoupling of the power supply pins and a stable clock source. The device supports multiple boot modes and has a flexible power management scheme with multiple low-power modes. For high-speed interfaces like Ethernet and USB, careful PCB layout is essential to maintain signal integrity. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, plus comparison tables and AEO-optimized application guidance.

USD $10.85 有现货

STM32F767VIH6

STM32F767VIH6 - 216MHz Cortex-M7 MCU 2MB Flash | ST

The STMicroelectronics STM32F767VIH6 is a high-performance 32-bit microcontroller based on the Arm Cortex-M7 core with double-precision FPU, running at up to 216 MHz and delivering 462 DMIPS (2.14 DMIPS/MHz), with 2 Mbytes of embedded Flash memory, housed in a 100-ball TFBGA (8x8 mm) package. A microcontroller (MCU) is a single-chip integrated circuit that combines a processor core, memory, and peripherals into one device, forming the lowest tier of the embedded computing hierarchy: MCU -> embedded processor -> system-on-chip. The STM32F7 series sits at the top of the STM32 general-purpose MCU portfolio, targeting applications that need near-application-processor performance with MCU-class real-time behavior and power consumption. Key features include the ART Accelerator and 16 Kbyte L1 instruction/data caches enabling 0-wait-state execution from embedded Flash, a single-precision/double-precision FPU and DSP instructions for signal processing, plus rich peripherals including SDRAM interface, TFT LCD controller, hardware JPEG codec, and DFSDM digital filter for sigma-delta modulators. Architecturally, the Cortex-M7 core pairs with the Chrom-ART Accelerator (DMA2D) for graphics bandwidth offload, while the ART Accelerator prefetches instructions to hide Flash latency at 216 MHz. Multiple embedded SRAM blocks and a flexible external memory controller (FMC) support SDRAM frame buffers for the TFT controller. Typical applications include industrial HMI and TFT display panels, motor control and power conversion, medical and test equipment, IoT gateways, and consumer devices requiring GUI rendering and fast DSP. Design consideration: at 216 MHz with external SDRAM, signal integrity and power distribution on the BGA footprint require careful decoupling and length-controlled routing for the FMC interface. This page synthesizes distributor stock data, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

USD $10.30 有现货

STM32F767ZIT6

STM32F767ZIT6 - 216MHz Cortex-M7 2MB Flash MCU | ST

The STMicroelectronics STM32F767ZIT6 is a high-performance 32-bit ARM Cortex-M7 microcontroller running at up to 216 MHz (462 DMIPS / 1082 CoreMark) with 2 MB of Flash memory, 512 KB of SRAM, and a 144-pin LQFP (20x20 mm, 0.5 mm pitch) surface-mount package. A microcontroller (MCU) is a compact integrated circuit that combines a processor core, memory, and programmable peripherals on a single die to govern a dedicated operation in an embedded system. The STM32F767ZIT6 belongs to the STM32F7 series within the broader STM32 family of Arm Cortex-M MCUs, positioning it in the high-performance tier of the embedded processing hierarchy, above mainstream Cortex-M4 devices such as the STM32F4 series. Key features include a double-precision FPU and DSP instructions on the Cortex-M7 core, an ART Accelerator and 8 KB instruction/data caches for zero-wait-state execution from Flash, a Chrom-ART Accelerator for 2D graphics, and a TFT LCD controller. Rich connectivity covers USART/UART, SPI, I2C, CAN, USB OTG HS/FS, Ethernet MAC, and camera interfaces, alongside multiple 12-bit ADCs and 16-bit DACs. Technically, the device integrates a hardware cryptographic accelerator (AES, DES/TDES, SHA-1, SHA-256) and a true random number generator (TRNG), with a flexible memory controller (FMC) supporting external SDRAM, NOR, and NAND. The 90 nm process balances high clock speed with low power, and dynamic clock gating supports low-power modes for battery-sensitive designs. Typical applications include industrial control and motor drives, human-machine interfaces with TFT displays, IoT gateways, audio processing, and test instrumentation, where 216 MHz performance and Ethernet/USB connectivity justify a high-performance Cortex-M7 platform. Design consideration: the MCU requires a 3.3V supply with 100 nF plus 4.7 uF decoupling capacitors at each VDD pair, and the two VCAP capacitors are mandatory for core regulation stability; it operates from -40C to +85C. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the ST datasheet, providing a complete selection and implementation resource.

USD $17.60 有现货

STM32F769BGT6

STM32F769BGT6 - 2MB Flash, 216MHz Cortex-M7 MCU | STMicroelectronics

The STMicroelectronics STM32F769BGT6 is a high-performance ARM Cortex-M7 microcontroller with a double-precision FPU, operating at up to 216 MHz. It integrates 2 MB of Flash and 512 KB of SRAM, and is housed in a 208-pin LQFP package (TFBGA/LQFP208 family) supporting TFT-LCD, Ethernet, USB, and hardware cryptography for graphics-rich secure embedded designs. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit that combines a processor core, volatile memory (SRAM), non-volatile memory (Flash), and programmable input/output peripherals on a single chip. Microcontrollers are the backbone of embedded systems, ranging from simple household appliances to complex industrial automation. The STM32F769BGT6 belongs to the STM32F7 series within the broader STM32 family of 32-bit ARM Cortex-M microcontrollers, placing it in the high-performance segment with advanced connectivity, hardware crypto, and TFT graphics. Key specifications include a Chrom-ART Accelerator that offloads 2D DMA transfers from the CPU, an integrated TFT-LCD controller supporting resolutions up to WXGA, an 8 KB instruction cache and 8 KB data cache for low-latency code execution, and a hardware cryptographic accelerator plus True Random Number Generator (TRNG) for secure-boot and TLS applications. Operating voltage spans 1.7 V to 3.6 V across the industrial -40 °C to +85 °C range. Technically, the device is fabricated on a low-power 40 nm CMOS process and includes the M7 instruction cache, DTCM and AXI/AHB bus matrix, DSP extensions, and the STM32 standard library ecosystem (HAL/LL drivers, STM32CubeMX). External memory interfaces include FMC for SDRAM, NOR/NAND Flash, and SRAM expansion. This architecture cleanly separates code, data, and peripheral DMA traffic. Typical applications include human-machine interface (HMI) panels with TFT displays, industrial PLCs, secure IoT gateways, point-of-sale terminals, motor-control drives, and medical imaging controllers. The combination of high clock speed, hardware crypto, and Ethernet MAC makes it ideal for connected, secure, graphics-rich products. When designing with this LQFP-208 device, follow ST's recommended land pattern and use a 4-layer PCB with a solid ground plane for the high-speed SDMMC, USB, and Ethernet signals. Provide dedicated 100 nF + 4.7 µF decoupling on each VDD pin, keep the NRST reset trace short, and ensure the BYPASS_REG pin uses a 1 nF + 1 µF network for internal LDO stability. This page synthesizes distributor pricing, drop-in alternatives, application companions, and practical design notes beyond the manufacturer datasheet to accelerate your BOM and firmware decisions.

USD $17.92 有现货

产品（18177)