微控制器

产品（18755)

ATSAME51J18A-AU - 120MHz Cortex-M4F MCU, 256KB Flash, 64-TQFP | Microchip
ATSAME51J18A-AU

ATSAME51J18A-AU - 120MHz Cortex-M4F MCU, 256KB Flash, 64-TQFP | Microchip

The Microchip Technology ATSAME51J18A-AU is a 32-bit ARM Cortex-M4F microcontroller from the SAM E51 high-performance family, running up to 120 MHz with single-precision Floating Point Unit (FPU) and DSP extensions. It integrates 256 KB of Flash with ECC, 128 KB of SRAM, and is housed in a 64-pin TQFP (10x10 mm) industrial-grade package rated from -40C to +85C. Key features include a 12-bit 1 MSPS ADC, high-speed USB, CAN-FD, SERCOM, I2S, and a 32 KB cache for external bus. A 32-bit microcontroller (MCU) is an integrated processor core with on-chip memory and peripherals built for embedded control. The Cortex-M4F architecture is an ARM processor with hardware single-precision floating point, DSP instructions, and a Nested Vectored Interrupt Controller (NVIC). In the power management hierarchy, an MCU sits at the heart of a digital system, executing firmware that orchestrates sensors, actuators, communication interfaces, and power conversion. The SAM E51 family is the high-performance tier in Microchip's SAM D5X/E5X lineup, bridging gap between Cortex-M0+ MCUs and Cortex-M7 application processors. Key features include hardware floating point acceleration, an integrated 12-bit ADC capable of 16-bit oversampling, a high-speed USB 2.0 full-speed and high-speed PHY on-chip, CAN-FD, up to six SERCOM-configurable serial interfaces (USART/SPI/I2C), a 10/100 Ethernet MAC interface, and a real-time clock with calendar. The 256 KB Flash is dual-panel with ECC to improve robustness against bit-flips, and the SRAM supports 8 KB of error correction via parity. The SAM E51 uses a 5-stage pipelined Cortex-M4F core with hardware FPU and DSP extensions, single-cycle 32-bit MAC, and a Memory Protection Unit (MPU). Peripherals are interconnected via an AHB-APB matrix with DMA support on every major interface. The 1.2V internal core LDO can be bypassed for direct 1.2V supply to minimize power consumption in high-performance runs. Typical applications include industrial automation controllers, smart energy metering, building automation gateways, USB peripherals (CDC/HID/MSC), CAN-FD automotive body controllers, IoT edge nodes with Ethernet, and human-machine interface (HMI) panels. The combination of Ethernet, USB, and CAN-FD makes the ATSAME51J18A-AU particularly suited for connected industrial nodes that must bridge multiple fieldbuses. When designing with this device, allocate a 1uF + 100nF decoupling pair within 2 mm of each supply pin and a 32.768 kHz crystal for the RTC. Use the on-chip FPU to offload DSP tasks from the host controller. The BOOTPROT and NVMCTRL settings must be programmed to lock the firmware and prevent unintended Flash access during field updates. This page synthesizes distributor pricing across DigiKey, Mouser, and LCSC, drop-in SAM D5X/E5X alternatives with verified pin compatibility, and practical engineering notes (analog reference, decoupling, layout) that are not consolidated in the Microchip datasheet.

询价 联系我们
ATSAME51J18A-AU-EFP - 120MHz Cortex-M4F MCU 256KB Flash TQFP-64 | Microchip
ATSAME51J18A-AU-EFP

ATSAME51J18A-AU-EFP - 120MHz Cortex-M4F MCU 256KB Flash TQFP-64 | Microchip

The Microchip Technology ATSAME51J18A-AU-EFP is a 32-bit ARM Cortex-M4F microcontroller from the SAM E51 family running up to 120 MHz, integrating 256 KB of Flash with ECC and 128 KB of SRAM, housed in a 64-pin TQFP (10x10 mm) package. The "EFP" descriptor indicates Extended Flash Performance tuning and tray packaging. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, and a rich set of peripherals into one package. The SAM E51 line belongs to the ARM Cortex-M4 class with single-precision Floating Point Unit (FPU) plus DSP extensions, sitting in the hierarchy MCU -> embedded controller -> semiconductor. These parts target industrial and general-purpose embedded applications requiring deterministic real-time performance, low power, and connectivity. Key features of the ATSAME51J18A-AU-EFP include the Cortex-M4F core with FPU and DSP instructions, up to 120 MHz operation, 256 KB dual-panel Flash with ECC, 128 KB SRAM, full-speed USB 2.0 with embedded host and device support, CAN-FD controller, up to six SERCOM interfaces for UART/SPI/I2C, a 12-bit 1 MSPS ADC, 16-bit analog comparators, and a 16-bit PWM/timer counter array. The device operates from 1.71 V to 3.84 V, suiting 3.3 V systems. Architecturally, the SAM E51 uses a 4-layer AHB bus matrix connecting the CPU, Flash, SRAM, and peripherals for low-latency memory access. The Flash includes hardware ECC for class-B safety integrity. The "Extended Flash Performance" bin tightens read characteristics at lower VDD, allowing the same 120 MHz zero-wait-state core speed across a wider operating envelope. Advanced power modes include IDLE, STANDBY, BACKUP, and OFF with battery-domain retention. Typical applications include industrial automation controllers, building-automation nodes (BACnet/Modbus gateways), IoT edge nodes with USB device/host roles, automotive body and accessory ECUs, drone flight controllers and ESCs, and human-machine interface (HMI) panels. The combination of USB, CAN-FD, and rich SERCOM connectivity also suits bridging hubs and field-bridge converters. When designing with this MCU, place 0.1 uF plus bulk decoupling within 5 mm of each VDD pin and provide a 32.768 kHz crystal for RTC accuracy. The EFP variant tolerates wider VDD/flash-timing corners than the standard -AU, so firmware written for one typically runs on the other without modification. This page synthesizes distributor pricing, drop-in alternatives from the SAM E5x family, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们
ATSAME51J18A-AUT - SAM E51 Cortex-M4F MCU 120MHz 256KB | Microchip
ATSAME51J18A-AUT

ATSAME51J18A-AUT - SAM E51 Cortex-M4F MCU 120MHz 256KB | Microchip

The Microchip Technology ATSAME51J18A-AUT is a 32-bit ARM Cortex-M4F microcontroller from the SAM E51 high-performance family, delivering up to 120 MHz core clock, 256 KB of dual-panel Flash with ECC, and up to 128 KB of SRAM in a 64-pin TQFP (10x10 mm) package. The integrated Floating Point Unit accelerates single-precision DSP and motor-control math, while the Serial Communication Interface (SERCOM) configurable as USART/SPI/I2C gives the designer six independent channels for mixed-protocol buses. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on one die. The ATSAME51J18A-AUT belongs to the broader category hierarchy: ARM Cortex-M4F core -> 32-bit RISC microcontroller -> embedded processor -> integrated circuit -> semiconductor. The Cortex-M4F variant adds the single-precision IEEE-754 FPU and DSP extensions (MAC, SIMD), making it a step above the Cortex-M4 and a step below the Cortex-M7 in ARM's performance ladder. Key features highlighted by the manufacturer include a full-speed USB 2.0 interface with integrated PHY, a CAN-FD controller for automotive and industrial protocols, a 12-bit 1 MSPS ADC with up to 16 channels, two analog comparators, a 16-bit Sigma-Delta ADC interface, and a Cryptographic Acceleration module (TRNG, AES, SHA, RSA). The device operates from 1.71 V to 3.63 V across an industrial temperature range of -40 C to +85 C, and supports Sleep, Idle, Standby, Hibernate, and Backup low-power modes for battery-driven designs. Architecturally, the SAM E51 uses Microchip's event system (EVSYS) to allow peripherals to trigger each other without CPU intervention, freeing the core for control loops. The 120 MHz Cortex-M4F reaches 150 CoreMark and 1.27 DMIPS/MHz, which is competitive in the same class as STM32F4 and NXP Kinetis KE1xF. Typical applications include industrial automation PLCs, building automation HVAC controllers, IoT edge nodes with secure cloud connectivity, USB peripherals (HID, CDC, audio), and CAN-FD automotive body-control modules. The integrated hardware crypto accelerator makes the part attractive for OTA-firmware-update designs where TLS handshake latency matters. When designing with this MCU, ensure the 64-pin TQFP land pattern matches your PCB. The -AUT suffix indicates tape-and-reel packaging and 85 C max ambient, so for 125 C designs choose the -AUT-EFP or -AFT variant.

询价 联系我们
ATSAME51J18A-AUT-EFP - 120MHz Cortex-M4F MCU, 256KB Flash | Microchip
ATSAME51J18A-AUT-EFP

ATSAME51J18A-AUT-EFP - 120MHz Cortex-M4F MCU, 256KB Flash | Microchip

The Microchip Technology ATSAME51J18A-AUT-EFP is a 32-bit ARM Cortex-M4F microcontroller from the SAM E51 family, running up to 120 MHz with a single-precision Floating Point Unit (FPU). It integrates 256 KB of Dual-Panel Flash with ECC and 128 KB of SRAM, and is housed in a 64-pin TQFP (10x10 mm) package with Extended Flash Performance and USB + CAN interfaces. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O. The ATSAME51J18A-AUT-EFP belongs to the ARM Cortex-M4F family, a 32-bit RISC architecture with DSP extensions and a hardware FPU. Within the broader taxonomy, MCUs sit under microcontrollers -> embedded processors -> semiconductors. The Cortex-M4F target application space includes motor control, industrial sensing, connectivity hubs, and consumer audio. Key features include 120 MHz CPU with FPU and DSP instructions, 256 KB Dual-Panel Flash with ECC for robust code storage, 128 KB SRAM, and a high-speed USB 2.0 Full-Speed interface plus a CAN-FD controller. The device also integrates multiple SERCOM peripherals (configurable as UART/SPI/I2C), a 12-bit ADC with up to 16 channels, a 12-bit DAC, and an Event System for deterministic inter-peripheral signaling. The SAM E51 architecture uses a 4-layer AHB matrix for parallel bus access between the CPU, SRAM banks, and peripherals, minimizing contention at high peripheral loads. Hardware accelerators include a Peripheral Touch Controller (PTC) supporting capacitive touch, a Cryptographic Accelerator (TRNG, AES) on equivalent family parts, and an Event System allowing peripherals to trigger each other without CPU intervention - critical for low-latency control loops. Typical applications include industrial automation controllers, USB-to-CAN bridges, IoT edge nodes, smart sensor hubs, and capacitive touch human-machine interfaces. The wide operating voltage (1.71V-3.6V) and -40C to +85C industrial temperature range suit factory-floor deployments. When designing with this device, ensure PCB layout keeps the VDDCORE decoupling network within 5 mm of the LDO output pins. Use the SAM E51 family header files and Atmel/Microchip START or MPLAB Harmony code configurator to generate peripheral initialization code, and validate USB 2.0 Full-Speed signal integrity against the USB 2.0 specification compliance checklist. This page synthesizes distributor pricing, drop-in alternatives from the SAME51/SAMD51 family, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们
ATSAME51J18A-MF - 120MHz ARM Cortex-M4F MCU 256KB Flash | Microchip
ATSAME51J18A-MF

ATSAME51J18A-MF - 120MHz ARM Cortex-M4F MCU 256KB Flash | Microchip

The Microchip Technology ATSAME51J18A-MF is a 32-bit ARM Cortex-M4F microcontroller from the SAM E51 high-performance family, operating at up to 120 MHz with single-precision floating point unit (FPU) and DSP extensions, packaged in a 64-pin QFN (9x9 mm) with industrial temperature range -40C to +125C. It integrates 256 KB of Flash memory with ECC, 128 KB of SRAM, and a comprehensive set of peripherals including USB 2.0 Full-Speed with on-chip PHY, CAN-FD, SERCOM, I2S, and a 12-bit ADC. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory, data memory, and integrated peripherals; ARM Cortex-M4F cores add hardware single-precision floating point and DSP instructions, making the part suitable for signal processing as well as control. The SAM E51 family is part of Microchip's SAM D5x/E5x line built around the Cortex-M4F and positions itself between mainstream Cortex-M0+ parts and higher-end Cortex-M7 devices, offering a balance of deterministic real-time performance, low power consumption, and rich connectivity for industrial and general-purpose applications. Key differentiating features of the ATSAME51J18A-MF include up to 120 MHz CPU clock with FPU and DSP, 256 KB dual-panel Flash with error correction, 128 KB SRAM, full-speed USB 2.0 device/host with on-chip PHY, multiple SERCOM interfaces for UART/SPI/I2C, a 12-bit 1 Msps ADC, a 16-bit analog comparator, and a hardware cryptographic engine supporting AES, SHA, and True Random Number Generator (TRNG). The 64-pin QFN package also provides extensive timer/counter resources and a TC capture compare channel for PWM generation. Architecturally, the SAM E51 uses a Cortex-M4F core with a multi-layer AHB bus matrix, low-power SleepWalking peripherals, and Event System for inter-peripheral signaling without CPU intervention. The dual-panel Flash design allows one bank to be updated while the other executes code, supporting firmware over-the-air (OTA) updates and in-field provisioning. Integrated hardware crypto accelerates AES-256, SHA-256, and secure boot functions. Typical applications include industrial automation controllers, USB HID/CDC peripherals, CAN-FD node gateways, sensor fusion nodes, portable medical devices, and motor-control edge nodes. The combination of USB, CAN-FD, and floating-point math makes it well suited for protocol bridge and gateway designs. When designing with this MCU, ensure decoupling is placed close to the VDD pins and that the 32.768 kHz crystal load capacitors match the crystal manufacturer's specification. The TrustZone for ARMv8-M (Cortex-M33) variant is recommended when secure boot is a hard requirement; the SAM E51 does not implement TrustZone but does support secure firmware update via the bootloader. Programming is supported via Microchip's MPLAB X IDE, MPLAB Harmony v3, and Atmel Studio 7 toolchains. This page synthesizes distributor pricing, same-brand drop-in alternatives (such as the ATSAMD51J18A-MF and ATSAMD51J20A-MF), and practical design notes not found on the manufacturer datasheet.

询价 联系我们
ATSAME51J19A-AF - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAME51J19A-AF

ATSAME51J19A-AF - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip Technology ATSAME51J19A-AF is a 32-bit ARM Cortex-M4F microcontroller with Floating Point Unit running up to 120 MHz, featuring 512 KB of Flash and 192 KB of SRAM in a 64-pin TQFP (10x10 mm) package. The part integrates USB 2.0 Full-Speed with embedded Host, CAN 2.0B, and a 12-bit 1 MSPS ADC with up to 16 channels. What is a Cortex-M4F microcontroller? An ARM Cortex-M4F is a 32-bit RISC processor core designed by ARM Holdings, featuring a hardware Floating Point Unit (single-precision IEEE 754) and DSP extensions. It occupies a position in the hierarchy: microcontroller -> 32-bit MCU -> ARM Cortex-M family -> Cortex-M4F core -> embedded processor. Compared to Cortex-M3, the M4F adds DSP instructions and an FPU, enabling efficient floating-point and signal-processing workloads on a deterministic real-time platform. Key features of the ATSAME51J19A-AF include up to 1 MB Dual-Panel Flash with ECC (512 KB on this die), up to 256 KB SRAM, a 12-bit DAC with 1 MSPS sampling, multiple SERCOM interfaces (up to 8 configurable UART/SPI/I2C), an integrated Ethernet MAC (10/100 Mbps), and a Cryptographic Acceleration module. The SAM E51 series is AEC-Q100 qualified, making this MCU suitable for harsh-environment automotive and industrial deployments. The device implements Microchip's Event System for inter-peripheral signalling without CPU intervention, a SleepWalking peripheral clock-gating scheme for low-power operation, and a Dual-Panel Flash architecture that allows concurrent read/write operations, eliminating the need for explicit EEPROM emulation. The 120 MHz core delivers 150 DMIPS / 273 CoreMark performance, and the integrated DSP instructions accelerate audio codecs, motor-control loops, and predictive maintenance math. Typical applications include industrial control and HMI, automotive CAN body and gateway ECUs, USB peripherals (CDC, HID, Mass Storage), smart energy metering, and IoT edge nodes with Ethernet connectivity. The part is also commonly used as a step-up replacement for legacy SAM4S or STM32F4 designs in safety-critical industrial installations. When designing with the ATSAME51J19A-AF, allocate decoupling capacitance of 100 nF per VDD pin plus a bulk 4.7 uF capacitor on the main rail. Route the 32.768 kHz low-frequency crystal traces symmetrically and place the load capacitors within 3 mm of the XIN32/XOUT32 pins. For USB applications, the D+/D- traces must be 90 ohm differential with length matching within 2 mm, and the internal 1.5 kohm pull-up on D+ can be used in low-speed/full-speed device mode. This page synthesizes verified distributor pricing, parametric drop-in alternatives, and practical design notes beyond the manufacturer datasheet, providing an engineering-focused reference for selecting the ATSAME51J19A-AF for new designs and re-purposing existing PCB layouts.

询价 联系我们
ATSAME51J19A-AFT - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAME51J19A-AFT

ATSAME51J19A-AFT - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip Technology ATSAME51J19A-AFT is a high-performance 32-bit ARM Cortex-M4F microcontroller with FPU, running up to 120 MHz, integrating 512 KB of dual-panel Flash and 192 KB of SRAM, in a 64-pin TQFP (10x10 mm) extended-temperature package. It belongs to the SAM E51 series, optimized for industrial and general-purpose applications requiring deterministic real-time response and rich connectivity. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O onto one silicon die. The Cortex-M4F class adds a hardware single-precision Floating Point Unit and DSP-extending instructions, making this category of MCU well-suited to motor control, digital signal processing, sensor fusion, and industrial control tasks where deterministic latency and computational density are required. Key features of the ATSAME51J19A-AFT include the ARM Cortex-M4F core with FPU and DSP extensions, 512 KB dual-panel Flash with ECC, 192 KB SRAM, dual CAN-FD controllers, a high-speed USB 2.0 Full-Speed interface, and an Event System for inter-peripheral signaling. The device integrates up to 51 programmable I/O pins, multiple SERCOM (serial communication) instances configurable as UART/SPI/I2C, and a 12-bit 1 MSPS analog-to-digital converter. The Cortex-M4F core with FPU and DSP extensions is the primary performance differentiator versus Cortex-M0/M3 competitors. Architecturally, the SAM E51 uses a multi-bus AHB/APB matrix that allows simultaneous data transfers between the CPU, DMA, and peripherals without stalling the core. The dual-panel Flash enables live firmware updates without downtime by switching between two physical Flash banks. The integrated FPU accelerates IEEE-754 single-precision math, while the DSP extensions handle single-cycle MAC operations on 16-bit data, which are essential for motor-control algorithms. Typical applications include industrial automation controllers, CAN-FD node endpoints in vehicle gateways and industrial backbones, USB device or embedded-host peripherals (e.g., HID, CDC, mass storage), motor control and inverter drives, and IoT sensor hubs with edge processing. The dual CAN-FD and high-speed USB combination is particularly well aligned with industrial gateway and smart-factory designs. When designing with this device, ensure the TCXO-crystal or external clock source meets the 120 MHz specification and that the on-board decoupling is sized per the SAM E51 hardware design checklist. Programming is supported via Microchip's MPLAB X IDE with MPLAB Harmony 3 framework, providing production-ready peripheral drivers and middleware. This page synthesizes verified distributor pricing, same-brand drop-in alternatives in the same 64-TQFP footprint, and practical design considerations not aggregated in the manufacturer datasheet.

询价 联系我们
ATSAME51J19A-AU - ARM Cortex-M4F 120MHz 512KB MCU | Microchip
ATSAME51J19A-AU

ATSAME51J19A-AU - ARM Cortex-M4F 120MHz 512KB MCU | Microchip

The Microchip ATSAME51J19A-AU is an ARM Cortex-M4F microcontroller running up to 120 MHz with single-precision floating-point unit (FPU), 512 KB of dual-panel Flash and 192 KB of SRAM, packaged in a 64-pin TQFP (10x10 mm). It belongs to the SAM E51 family targeted at industrial and general-purpose applications and integrates a full set of peripherals including a high-speed USB, CAN-FD, Ethernet MAC (via the GMAC variant on related parts), SERCOM, I2S, ADC, DAC and touch sensing (PTC). A 32-bit ARM Cortex-M microcontroller is a system-on-chip combining a processor core, on-chip memory, and peripherals around a unified bus matrix. Within the broader taxonomy it sits under MCU (microcontroller) -> embedded processor -> semiconductor IC. The Cortex-M4F specifically adds DSP extensions and an FPU, letting engineers execute signal-processing and control loops in hardware instead of software emulation, which directly reduces CPU load and improves determinism. Key features include 120 MHz CPU clock with FPU, 512 KB dual-bank Flash that supports live update, full-speed USB 2.0 device/host, CAN 2.0B and CAN-FD, up to 6 SERCOM channels each configurable as UART/SPI/I2C, a 12-bit ADC up to 1 Msps, a 10-bit DAC, AES/SHA hardware crypto accelerator, and a 2 KB additional user row for EEPROM emulation. Operating voltage is 1.71 V to 3.63 V and junction range is -40 C to +85 C (industrial grade, AU suffix). Architecturally, the device uses a multi-layer AHB bus matrix connecting the Cortex-M4F core, DMA controller (24 channels), HS USB, and peripherals, allowing concurrent bus-master activity without starvation. The dual-panel Flash with Prefetch and Cache, plus the FPU, deliver >230 CoreMark/MHz-class performance while keeping active current under typical industrial budgets. Typical applications include industrial control (PLC, motor control), USB peripherals, CAN-FD nodes in automotive and industrial networks, HMI with touch and TFT, smart energy metering, and IoT gateways. Design considerations include mandatory 0.1 uF + 1 uF decoupling near VDD/VSS pairs, exposure-pad grounding for thermal relief, and route the HS USB D+/D- as a 90-ohm differential pair. Pin-compatible same-family options such as ATSAME51J20A (1 MB Flash) allow post-design memory upgrades without PCB rework. This page synthesizes distributor pricing, same-family drop-in alternatives (ATSAME51J18A-AU, ATSAME51J20A-AU, ATSAMD51J19A-AU, ATSAMDA1F15B-AU), practical design notes, and parametric comparisons that supplement the manufacturer datasheet and distributor listings.

询价 联系我们
ATSAME51J19A-AU-EFP - 120MHz Cortex-M4F MCU 512KB | Microchip
ATSAME51J19A-AU-EFP

ATSAME51J19A-AU-EFP - 120MHz Cortex-M4F MCU 512KB | Microchip

The Microchip Technology ATSAME51J19A-AU-EFP is a high-performance 32-bit ARM Cortex-M4F microcontroller from the SAM E51/SAM E53 family, delivering up to 120 MHz CPU clock speed with single-precision floating-point unit (FPU) and DSP extensions. The device integrates 512 KB of Flash program memory in a 64-pin TQFP (10x10 mm) package, paired with 192 KB of SRAM and operating from a 1.62 V to 3.6 V supply range. A microcontroller (MCU) is a single-chip computer containing a processor core, volatile and non-volatile memory, programmable peripherals, and I/O lines, and the Cortex-M4F architecture extends the baseline Cortex-M instruction set with single-precision IEEE-754 floating-point, saturating arithmetic, and DSP macros. MCUs occupy the lowest tier of the embedded-compute hierarchy - they integrate more functions than a microprocessor (which requires external memory) but less compute density than an MPU/SOC. The Cortex-M4F class typically targets deterministic real-time control with moderate DSP load, distinguishing it from Cortex-M0/M0+ (low-power, integer only) and Cortex-M7 (high-end DSP + Ethernet/display). Key features include an integrated Full-Speed USB 2.0 device/host with PHY, two CAN-FD controllers, a 12-bit 1-MSPS ADC, multiple SERCOM (SERial COMmunication) channels configurable as UART/SPI/I2C, a TCC timer subsystem for motor control, and AES/SHA hardware crypto. The 64-pin TQFP package and -40C to +85C industrial temperature range support 5V-tolerant I/O on selected pins. Architecturally, the SAM E51/E53 family uses an in-application programmable Flash with dual-bank support for fail-safe firmware update, a separate boot-ROM for secure bootloader flows, and a multi-layer AHB/APB bus matrix with tightly-coupled peripherals to reduce interrupt latency below 12 cycles. The part is intended for automotive, industrial automation, and IoT edge nodes requiring USB, CAN, and deterministic real-time performance. Typical applications include industrial sensors, building automation nodes, USB peripherals such as human-interface devices (HIDs), CAN-based distributed control, and low-end motor control loops. Compared with the sibling ATSAME51J18A (Flash 256 KB), the J19A variant doubles the program memory while sharing the same peripheral set. When designing with this device, ensure decoupling follows Microchip's AN3335 guidance (one 100 nF + one 4.7 uF near each power pin), plan for IDE selection between MPLAB X, Atmel Studio, and third-party GCC/IAR toolchains, and reserve the SWD/SWO debug pads in a footprint-compatible 0.05-inch header. This page synthesizes distributor pricing, drop-in TQFP-64 alternatives from the SAME51 family, and practical design notes not found in the manufacturer datasheet alone, giving engineers a single reference for both component selection and design-in.

询价 联系我们
ATSAME51J19A-AUT - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAME51J19A-AUT

ATSAME51J19A-AUT - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip ATSAME51J19A-AUT is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with a single-precision Floating Point Unit (FPU), housed in a 64-pin TQFP (10x10 mm) package rated for the industrial -40C to +85C temperature range. It integrates 512 KB of Flash, 256 KB of SRAM, and the full SAM E51 peripheral set including a 12-bit ADC, DAC, SERCOM, CAN-FD, and a high-speed USB interface. A Cortex-M4F microcontroller is a 32-bit ARM processor core augmented by a hardware FPU and DSP extensions, optimized for deterministic real-time control and signal processing. The SAM E51 family sits in Microchip's mid-performance MCU tier above the SAMD51 and shares the Cortex-M4F ISA, enabling straightforward firmware migration. The part belongs to the broader product hierarchy: ARM Cortex-M4F MCU -> 32-bit microcontroller -> embedded microcontroller -> integrated circuit -> semiconductor. Key features of the ATSAME51J19A-AUT include 120 MHz core clock with FPU, 512 KB dual-panel Flash for read-while-write firmware update support, 256 KB SRAM, a 12-bit 1 MSPS ADC, 12-bit DAC, up to six SERCOM modules for UART/SPI/I2C, one CAN-FD controller, full-speed USB with embedded PHY, and an Event System for low-latency inter-peripheral signaling. The TQFP-64 footprint provides generous I/O for mixed-signal designs. The architecture pairs the Cortex-M4F core with a 5-stage pipeline, single-cycle MAC, and single-precision IEEE-754 FPU, delivering 1.61 CoreMark/MHz efficiency. Hardware accelerators such as the Peripheral Touch Controller and the I2S interface are integrated, reducing BOM cost. The dual-panel Flash allows one bank to execute code while the other is being reprogrammed, supporting OTA firmware updates without external memory. Typical applications include industrial IoT gateways, CAN-FD connected sensor hubs, USB-C audio interfaces, building automation controllers, and HMI touch panels. The combination of floating-point DSP performance, USB, and CAN-FD makes the part a strong fit for industrial connectivity nodes that aggregate sensor data and present it to a host controller. When designing with this MCU, allocate the 64-pin budget carefully: SERCOMs are highly multiplexed, so pin mapping must be finalized before PCB layout. Use the Atmel Studio 7 / MPLAB X IDE with ASF or Harmony 3 frameworks for peripheral configuration and code generation. This page synthesizes distributor pricing, drop-in SAM E51 / SAMD51 alternatives, and application guidance not found in a single datasheet source, helping engineers select and source the right variant faster.

询价 联系我们
ATSAME51J19A-AUT-EFP - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAME51J19A-AUT-EFP

ATSAME51J19A-AUT-EFP - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip ATSAME51J19A-AUT-EFP is a 32-bit ARM Cortex-M4F microcontroller with FPU running up to 120 MHz, integrating 512 KB of Flash and 192 KB of SRAM in a 64-pin TQFP (10x10 mm) package. It is part of the SAM E51 family, which targets industrial and general-purpose applications requiring high performance, low power, and rich connectivity including USB and CAN-FD. A microcontroller (MCU) is an integrated circuit that combines a processor core, memory (Flash and SRAM), and a range of peripherals on a single die. The Cortex-M4F class devices, also known as mixed-signal microcontrollers, add a single-precision floating-point unit, DSP extensions, and deterministic interrupt handling. Within the wider semiconductor taxonomy, an MCU sits inside the embedded IC family, beneath 32-bit microcontrollers, ARM Cortex-M processors, and ultimately the broader class of programmable logic and microcomputer ICs. Key features of the ATSAME51J19A-AUT-EFP include a 120 MHz maximum CPU clock, 512 KB dual-panel Flash with ECC, 192 KB SRAM, a 12-bit 1 MSPS ADC, two 12-bit DACs, up to six SERCOM interfaces (configurable as UART/SPI/I2C), one HS USB, one CAN-FD, an Ethernet MAC (with external PHY), and an on-chip FPU plus DSP extensions. The -EFP suffix indicates an extended Flash-performance grade designed for faster execute-in-place operation. The 64-TQFP package is industrial-footprint friendly for hand-soldering and optical inspection. Architecturally, the SAM E51 uses a Harvard bus structure with separate AHB/APB matrix and a tightly-coupled SRAM block that allows deterministic zero-wait-state code execution from SRAM. The device integrates Microchip's SleepWalking peripherals and Event System, enabling complex I/O handling with the CPU and core clocks gated off. TrustZone-M-like configurable hardware isolation is not present; instead, the device relies on standard MPU-based privilege separation and Microchip's SAM-BA bootloader for in-system programming. Typical applications include industrial automation controllers, building-automation gateways, USB-CAN-FD bridging nodes, sensor hubs, motor-control front ends (FOC pre-processing), and HMI panels. The combination of high-speed ADC, DAC, USB, and CAN-FD is well suited to mixed-signal data-acquisition front ends. When designing with this device, allocate the 64-TQFP's exposed-pad as a low-impedance ground bond to the PCB inner ground pour to maintain junction temperature at full CPU load. Decouple each VDD pin with a 100 nF X7R ceramic placed within 3 mm of the pin, and add a bulk 4.7 uF tantalum or ceramic close to the VDDCORE pin. This page synthesizes XAIPART distributor pricing, drop-in SAME-package SAM E51/SAMD51 alternatives, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们
ATSAME51J19A-MF - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAME51J19A-MF

ATSAME51J19A-MF - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip Technology ATSAME51J19A-MF is a 32-bit ARM Cortex-M4F microcontroller with Floating Point Unit running up to 120 MHz, integrating 512 KB of Flash and 192 KB of SRAM in a 64-pin QFN (9x9 mm) package. It is part of the SAM E51 family targeted at industrial and general-purpose applications requiring deterministic real-time control, USB and CAN connectivity, and rich analog peripherals. What is a Cortex-M4F microcontroller? An ARM Cortex-M4F microcontroller is a 32-bit embedded processor core with single-precision Floating Point Unit (FPU), hardware single-cycle multiply-accumulate, and optional DSP extensions. It sits in the ARM Cortex-M hierarchy between the M0+ (lowest power, simplest) and M7 (highest performance, with optional double-precision FPU), making it the mainstream choice for motor control, industrial sensing, and connected edge nodes. The SAM E51 line extends the M4F with Microchip's proprietary peripherals, dual-panel Flash for live update, and a 5V-tolerant I/O structure that simplifies industrial interfaces. Key features of the ATSAME51J19A-MF include: 120 MHz core with FPU, 512 KB Flash, 192 KB SRAM, full-speed USB 2.0 with embedded PHY, two CAN-FD controllers, a 12-bit 1 Msps ADC, two 12-bit DACs, multiple SERCOM (UART/SPI/I2C) channels, an on-board crypto accelerator for AES and secure boot, and an Event System for inter-peripheral signaling without CPU involvement. Architecturally, the device pairs a Cortex-M4F core with a multi-layer AHB/APB bus matrix, a low-power SleepWalking peripheral controller, and a dual-panel Flash subsystem that enables in-field firmware upgrades without downtime. The on-chip 32 kHz crystal-less USB PLL and the SERCOM module each independently routable to most I/O pins provide PCB layout flexibility. Typical applications include industrial motor control (FOC for BLDC/PMSM), USB-CAN bridge gateways, building automation HMI, predictive-maintenance sensor hubs, and portable medical instrumentation. The AEC-Q100 qualified -MUT variant addresses automotive body and chassis ECUs, while the -MF variant targets extended-temperature industrial designs. When designing in this part, budget attention to the dual-panel Flash programming flow and the SERCOM pin-mux configuration; both are common first-prototype pitfalls. The integrated 1.2V core LDO requires a 1 uF X7R bypass on VDDIO and a 4.7 uF bulk on VDDIN to meet USB inrush specifications. This page synthesizes distributor pricing, drop-in alternatives within the SAM E51 family, and practical design notes not collected on a single manufacturer datasheet page.

询价 联系我们
ATSAME51J19A-MFT - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAME51J19A-MFT

ATSAME51J19A-MFT - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip Technology ATSAME51J19A-MFT is a 32-bit ARM Cortex-M4F microcontroller from the SAM E51 family, running up to 120 MHz with single-precision Floating Point Unit (FPU), 512 KB of Dual-Panel Flash with ECC, and 192 KB of SRAM. Housed in a 64-pin QFN (9x9 mm) package with industrial-grade -40C to +125C temperature rating, this MCU integrates a high-speed USB 2.0 Full-Speed device/host port, a CAN-FD controller, and a 12-bit 1 MSPS ADC. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O into one package. The Cortex-M4F architecture places the ATSAME51J19A-MFT within the broader hierarchy of: microcontroller -> embedded processor -> 32-bit MCU -> ARM Cortex-M family -> Cortex-M4 class (with FPU). It is positioned above Cortex-M0/M0+ for performance-sensitive tasks and below Cortex-M7/M33 in Microchip's SAM lineup. Key features include 120 MHz Cortex-M4F core with DSP extensions, 512 KB Flash with ECC, 192 KB SRAM, 16 KB cache, and up to 51 GPIO. The integrated FPU accelerates floating-point math for sensor fusion and motor control loops, while the 1 MSPS ADC supports precision analog sampling. Dedicated peripherals such as the SERCOM (configurable serial communication) blocks, QSPI for external memory, and an Ethernet MAC interface expand the device's connectivity options. The ATSAME51J19A-MFT utilizes Microchip's proprietary SAM E51 architecture optimized for low-power mixed-signal applications. Dual-Panel Flash allows simultaneous read-while-write operation, enabling live firmware updates without halting execution. The peripheral event system enables hardware-triggered inter-peripheral signaling without CPU intervention, reducing latency for time-critical applications such as motor control and high-speed data acquisition. Typical applications include industrial automation controllers, building automation gateways, USB-connected sensor hubs, automotive body electronics, and consumer IoT edge nodes. The combination of CAN-FD, USB, and Ethernet makes it particularly well-suited for industrial networking and connected-device applications requiring deterministic communication. When designing with the ATSAME51J19A-MFT, pay close attention to the QFN-64 thermal pad layout - the exposed pad must be soldered to a sufficiently large copper pour for heat dissipation and ground return. The internal 48 MHz DFLL should be calibrated against the USB SOF framing for clock accuracy in USB Full-Speed applications. This page synthesizes distributor pricing, drop-in alternatives from Microchip's SAM E51 and SAMD51 families, and practical design notes not found on the manufacturer datasheet.

询价 联系我们
ATSAME51J19A-MU - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAME51J19A-MU

ATSAME51J19A-MU - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip Technology ATSAME51J19A-MU is a 32-bit ARM Cortex-M4F microcontroller from the SAM E51 family running up to 120 MHz with an integrated single-precision Floating Point Unit (FPU), packaged in a 64-pin VQFN (9x9 mm) with 512 KB Flash and 192 KB SRAM. It is part of Microchip's SAM E5x series targeting industrial and general-purpose applications requiring deterministic real-time performance with rich connectivity peripherals. A microcontroller (MCU) is a compact integrated circuit that combines a CPU core, program memory (Flash), data memory (SRAM), and a wide range of peripherals on a single die. The SAM E51 belongs to the 32-bit MCU category, sitting within the hierarchy ARM Cortex-M -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. The M4F core adds DSP extensions and hardware FPU for sensor fusion and signal-processing workloads. Key features include 512 KB Dual-Panel Flash, 192 KB SRAM, a 12-bit 1 MSPS ADC with up to 16 channels, a 12-bit DAC, USB 2.0 Full-Speed device/host with on-chip PHY, CAN-FD, SERCOM, I2S, and advanced 32-bit timers. The device operates from 1.71V to 3.63V, making it compatible with both 1.8V and 3.3V rails, and supports the industrial temperature range of -40C to +85C. The VQFN-64 footprint includes an exposed thermal pad. The ATSAME51J19A-MU integrates an 8-channel Event System, a Peripheral Touch Controller (PTC), and a high-speed 80 MHz SERCOM for flexible serial communication. It is supported by the Atmel Studio / MPLAB X IDE ecosystem and the Harmony 3 software framework, with TrustZone-M support in the same family. Typical applications include industrial control boards, USB-CAN sensor hubs, smart home gateways, building automation, HMI panels, and portable instrumentation. Its 1 MSPS ADC and on-chip DAC simplify mixed-signal designs without external converters. When designing with this part, place decoupling capacitors as close to each VDD pin as possible, and stitch the VQFN exposed pad to a solid ground copper pour for thermal dissipation. Verify errata sheets for the device revision in production. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
ATSAME51J19A-MU-EFP - 120MHz ARM Cortex-M4F MCU, 512KB Flash | Microchip
ATSAME51J19A-MU-EFP

ATSAME51J19A-MU-EFP - 120MHz ARM Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip Technology ATSAME51J19A-MU-EFP is a 32-bit ARM Cortex-M4F microcontroller from the SAM E5x family, running up to 120 MHz with an integrated single-precision Floating Point Unit (FPU). It integrates 512 KB of Dual Panel Flash with ECC and is offered in a 64-pin VQFN (9x9) package with an exposed thermal pad, supplied in tray packaging. According to Microchip product pages, the device targets industrial automation, motor control, and connected IoT edge nodes requiring deterministic real-time performance. A microcontroller (MCU) is a single-chip processor integrating CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (timers, communication controllers, ADCs). The Cortex-M4F core is one tier above the Cortex-M0/M3 in ARM's embedded hierarchy (Cortex-M0 -> Cortex-M3 -> Cortex-M4F -> Cortex-M7), adding DSP extensions and hardware FPU for floating-point math. The SAM E5x series further augments the core with Microchip-specific peripherals such as the SERCOM (Serial Communication) interface, TCC (Timer/Counter for Control), and the Event System for inter-peripheral signaling without CPU intervention. Key features of the ATSAME51J19A-MU-EFP include full-speed USB 2.0 with integrated PHY, CAN-FD, and SD/MMC host interfaces. The device provides advanced analog peripherals such as a 12-bit ADC (up to 1 MSPS), a 10-bit DAC, and multiple analog comparators. Integrated security features include a True Random Number Generator (TRNG), secure boot, and hardware cryptographic accelerators (AES, SHA). The Extended Flash Performance (EFP) suffix denotes a 5V-tolerant I/O variant suitable for industrial 24V systems via external translation. The Cortex-M4F core executes the Thumb-2 instruction set, delivering 1.25 DMIPS/MHz (Dhrystone 2.1) and a single-cycle MAC for DSP workloads. The 120 MHz clock provides 150 DMIPS of integer performance plus IEEE 754 single-precision floating point. The dual-panel flash architecture enables in-application programming without blocking execution, with ECC ensuring reliable operation in electrically noisy industrial environments. Typical applications include industrial PLCs, motor control (BLDC and PMSM FOC), building automation gateways, smart energy metering, IoT edge nodes with secure cloud connectivity, and human-machine interface (HMI) controllers. The integrated CAN-FD and USB make it suitable for automotive body and infotainment ECUs in non-safety-critical subsystems. When designing with this device, place decoupling capacitors (100 nF + 1 µF) within 2 mm of each VDD pin and route the exposed pad (EP) to a continuous ground plane for thermal dissipation. Use MPLAB X IDE with the MPLAB Harmony framework for rapid firmware development, and verify the Extended Flash Performance (EFP) variant matches your I/O voltage requirements before PCB fabrication. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not found in the standalone manufacturer datasheet, giving engineers a one-stop reference for sourcing and design-in decisions.

询价 联系我们
ATSAME51J19A-MUT-EFP - 120MHz Cortex-M4F MCU 512KB Flash | Microchip
ATSAME51J19A-MUT-EFP

ATSAME51J19A-MUT-EFP - 120MHz Cortex-M4F MCU 512KB Flash | Microchip

The Microchip Technology ATSAME51J19A-MUT-EFP is a 32-bit ARM Cortex-M4F microcontroller from the SAM E53 family, running up to 120 MHz with a single-precision Floating Point Unit, 512 KB of Flash, and housed in a 64-pin VQFN (9x9 mm) package with exposed thermal pad. It integrates a full-speed USB 2.0 device/host interface, CAN-FD, SERCOM, I2S, and a 12-bit ADC for mixed-signal embedded designs. The -EFP suffix denotes Extended Flash Performance variants with higher endurance and retention characteristics over the standard flash parts. What is a Cortex-M4F microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and peripherals. The ARM Cortex-M4F is a 32-bit processor core with hardware single-precision floating point, DSP extensions, and a Nested Vectored Interrupt Controller (NVIC). Within the taxonomy of embedded processors, the Cortex-M4F sits between Cortex-M3 (no FPU) and Cortex-M7 (higher performance, double-precision FPU) in the ARMv7-M family, balancing deterministic real-time response with DSP-class signal processing throughput. Key features of the ATSAME51J19A-MUT-EFP include 192 KB SRAM with error correction, a 12-bit 1 Msps ADC with up to 16 channels, two 12-bit DAC channels, four SERCOM channels configurable as UART/SPI/I2C, a High-Speed USB 2.0 interface with on-chip PHY, a CAN-FD controller, and a Cryptographic Engine supporting AES, SHA, and True Random Number Generator. The 120 MHz core delivers 150 DMIPS / 273 CoreMark performance, enabling real-time DSP workloads such as audio processing, motor control, and sensor fusion without external accelerators. The device uses a low-power architecture with multiple sleep modes (Idle, Standby, Backup) consuming as little as a few microamps, and offers a sophisticated Event System for CPU-independent peripheral signaling. The 64-VQFN package provides excellent thermal dissipation through the exposed pad and is suitable for space-constrained industrial, IoT, and consumer designs. Typical applications include industrial IoT gateways, USB-CAN sensor hubs, audio playback peripherals with USB streaming, motor control inverter boards, and low-power wireless sensor nodes paired with external transceivers. The combination of USB, CAN, and a generous ADC makes this part especially attractive for industrial bridges and Human-Machine Interface (HMI) controllers. When designing with this device, ensure the exposed pad is soldered to a continuous ground copper pour to meet the thermal resistance specification and to provide a stable reference for the analog peripherals. Decoupling follows the standard 100 nF + 1 uF + bulk capacitor arrangement placed as close as possible to each power pin pair.

询价 联系我们
ATSAME51J20A-AF - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
ATSAME51J20A-AF

ATSAME51J20A-AF - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip

The Microchip Technology ATSAME51J20A-AF is a 32-bit ARM Cortex-M4F microcontroller from the SAM E51 family, running up to 120 MHz with 1 MB of dual-panel Flash and 256 KB of SRAM, housed in a 64-pin TQFP (10x10 mm) package. It integrates a Floating Point Unit (FPU), a 1 MSPS 12-bit ADC, two CAN-FD controllers, USB 2.0 Full-Speed, and a 10/100 Ethernet MAC, making it a high-performance general-purpose MCU for industrial and automotive AEC-Q100 applications. What is a SAM E51 microcontroller? An ARM Cortex-M4F MCU is a 32-bit microcontroller built around the ARM Cortex-M4 processor core with single-precision Floating Point Unit and DSP extensions. SAM E51 belongs to Microchip's SAM family of Cortex-M4F microcontrollers, which sit within the broader microcontroller and embedded-processor category of semiconductors. These MCUs target industrial automation, motor control, IoT gateways, and automotive subsystems where deterministic real-time performance, connectivity, and math-intensive signal processing are required. Key differentiating features of the ATSAME51J20A-AF include 1 MB dual-panel Flash with ECC, 256 KB SRAM, four SERCOM interfaces configurable as UART/SPI/I2C, two I2S for digital audio, two CAN-FD, a parallel camera interface, an Ethernet MAC with 1588 PTP support, and a 120 MHz Cortex-M4F core delivering 150 CoreMark / 1.25 DMIPS per MHz. The device operates from 1.71 V to 3.63 V with an internal 48 MHz DFLL and a 12 MHz crystal-less PLL for USB. The ATSAME51J20A-AF uses a 2-layer AHB bus matrix and a dedicated 4-channel DMA controller (DMAC) plus an Event System for zero-CPU-overhead peripheral signaling. The integrated FPU accelerates float math for control loops and DSP, while the 1 MSPS ADC enables high-bandwidth analog sampling for sensor fusion. Typical applications include industrial PLCs, building automation controllers, automotive body and HVAC modules, USB peripherals, Ethernet-connected IoT gateways, and graphical HMI panels. The wide operating temperature range of -40 C to +125 C makes the part suitable for both industrial and AEC-Q100 automotive use. When designing with the ATSAME51J20A-AF, decouple VDDCORE and VDDIO with a minimum of 100 nF X7R per pin pair, route the 32.768 kHz crystal traces symmetrically, and reference Microchip application notes for the SERCOM, DMAC, and Event System to fully offload peripheral work from the CPU. This page synthesizes distributor pricing for the ATSAME51J20A-AF, cross-references drop-in alternatives within the SAM E51/SAM D51 family, and consolidates practical design notes beyond the manufacturer datasheet summary.

询价 联系我们
ATSAME51J20A-AFT - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
ATSAME51J20A-AFT

ATSAME51J20A-AFT - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip

The Microchip Technology ATSAME51J20A-AFT is a 32-bit ARM Cortex-M4F microcontroller from the SAM E51 family, operating up to 120 MHz with 1 MB of dual-panel Flash and 256 KB of SRAM, housed in a 64-pin TQFP (10x10 mm) package. This AEC-Q100-qualified industrial-grade MCU integrates an FPU, a high-speed 12-bit ADC, USB 2.0 Full-Speed, and CAN-FD connectivity for industrial and general-purpose embedded designs. A 32-bit ARM Cortex-M4F microcontroller is a high-performance MCU combining a Cortex-M4 core with a single-precision floating-point unit (FPU), DSP extensions, and a Nested Vectored Interrupt Controller (NVIC). Within the embedded hierarchy, it sits above 8/16-bit MCUs (8051, AVR, PIC16) and below Cortex-M7/M33 application-class parts, with on-chip Flash, SRAM, peripherals, and an integrated voltage regulator enabling single-supply operation. The SAM E51 series targets motor control, industrial connectivity, and consumer HMI applications. Key features include 1 MB dual-panel Flash with ECC, 256 KB SRAM, a 12-bit 1 Msps ADC with up to 16 channels, 2 CAN-FD controllers, USB 2.0 Full-Speed with on-chip PHY, and a 120 MHz Cortex-M4F core delivering 150 CoreMark. The device operates from 1.71V to 3.6V, supports -40C to +125C extended industrial temperature, and includes a Serial Communication Interface (SERCOM) module configurable as UART/SPI/I2C. TrustZone-M and secure boot options are also available for IoT edge deployments. The SAM E51 family uses Microchip's proprietary peripheral touch controller (PTC) and a high-performance bus matrix with dual-bank Flash for in-application programming without downtime. The integrated FPU and DSP instructions accelerate control-loop math (PID, FFT, matrix transforms) commonly needed in motor control and digital power conversion. Hardware cryptographic accelerators support AES, SHA, and True Random Number Generator (TRNG) for security-sensitive applications. Typical applications include industrial motor control (BLDC, FOC drives), building automation (HVAC, lighting), IoT edge nodes with CAN-FD networking, USB-connected consumer devices, and human-machine interface (HMI) panels. The combination of large memory, dual CAN-FD, and extended temperature makes it particularly attractive for industrial sensor hubs and predictive-maintenance gateways. When designing with this part, ensure the 64-pin TQFP layout provides sufficient ground stitching and decoupling (100 nF + bulk) close to each VDD pin. For CAN-FD networks, add a proper CAN transceiver (e.g., MCP2562FD) and 120 ohm termination at bus ends. Use the dual-panel Flash bank-swap feature to enable safe firmware updates in the field.

询价 联系我们
ATSAME51J20A-AU - Cortex-M4F MCU 120MHz 1MB Flash | Microchip
ATSAME51J20A-AU

ATSAME51J20A-AU - Cortex-M4F MCU 120MHz 1MB Flash | Microchip

The Microchip ATSAME51J20A-AU is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with Floating Point Unit, 1 MB of dual-panel Flash with ECC, and 256 KB of SRAM, housed in a 64-pin TQFP (10x10 mm) package. It targets industrial and general-purpose applications requiring deterministic real-time control combined with high-throughput connectivity including USB 2.0 Full-Speed, CAN-FD, and SERCOM. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals. The Cortex-M4F belongs to the ARM Cortex-M family of energy-efficient processors designed for embedded deterministic control; the 'F' suffix denotes the integrated single-precision Floating Point Unit, which accelerates DSP-style math without taxing the integer pipeline. Within the broader semiconductor taxonomy, MCUs sit inside the Integrated Circuits > Microcontrollers segment, and the SAM E51 series is Microchip's high-performance Cortex-M4F line intended to bridge the gap between the Cortex-M0+ SAM D family and Cortex-M7 SAM S/E7 families. Key features of the ATSAME51J20A-AU include 120 MHz core with FPU, 1 MB dual-panel Flash with ECC, 256 KB SRAM, a 16-bit accurate ADC peripheral set, and hardware crypto accelerators for AES and True Random Number generation. The device integrates a USB 2.0 Full-Speed transceiver, multiple SERCOM modules that can be configured as UART/SPI/I2C, CAN-FD controllers, and a sophisticated Event System for deterministic peripheral-to-peripheral signaling without CPU intervention. Power management provides multiple low-power Sleep modes, a battery backup domain, and a temperature range of -40C to +85C suitable for industrial environments. Architecturally, the SAM E51 uses a 3-layer AHB bus matrix connecting the Cortex-M4F core to Flash, SRAM, and peripherals, with a dedicated bridge to the low-power peripherals. Dual-panel Flash allows read-while-write operation, supporting live firmware updates, and the integrated error-correction code (ECC) on Flash and SRAM improves reliability in electrically noisy industrial environments. The FreeRTOS-friendly architecture and Microchip's MPLAB Harmony 3 framework make it well suited for connected industrial sensor nodes, graphical HMIs, and protocol bridge applications. Typical applications include industrial CAN-FD nodes, USB-connected sensor hubs, motor control FOC firmware, building automation gateways, and medical instrumentation front-ends. The wide operating voltage range of 1.71V to 3.63V simplifies battery-backed designs and direct 3.3V rail connection. When designing with this MCU, allocate a 4.7uF decoupling capacitor bank near the VDD pins and keep the SWD trace length below 50 mm to ensure reliable debug access throughout the product lifetime. This page synthesizes distributor pricing, drop-in alternatives from the same SAM E51 family and from competing Cortex-M4F pin-compatible parts, and practical design notes not consolidated in a single manufacturer document.

询价 联系我们
ATSAME51J20A-AU-EFP - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
ATSAME51J20A-AU-EFP

ATSAME51J20A-AU-EFP - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip

The Microchip Technology ATSAME51J20A-AU-EFP is a 32-bit ARM Cortex-M4F microcontroller from the SAM E51 family, delivering up to 120 MHz CPU clock speed with single-precision Floating Point Unit (FPU), 1 MB of Dual-Panel Flash with ECC, and 256 KB of SRAM in a 64-pin TQFP (10x10 mm) package. The part is rated for 3.3 V typical supply operation and supports USB 2.0 Full-Speed and CAN-FD interfaces, making it well suited for industrial and general-purpose embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (timers, communication controllers, ADCs, GPIO). MCUs are classified hierarchically as: microcontroller -> embedded processor -> semiconductor -> integrated circuit. ARM Cortex-M4F parts specifically add a hardware FPU and DSP extensions, enabling efficient floating-point and signal-processing workloads without taxing the CPU. Key features of the ATSAME51J20A-AU-EFP include the Cortex-M4F core with FPU running at 120 MHz, 1 MB of Flash, 256 KB SRAM, 16 KB instruction cache (I-cache), a 12-bit 1 MSPS ADC with up to 32 channels, a 12-bit DAC, SERCOM (serial communication) interfaces configurable as UART/SPI/I2C, a Full-Speed USB 2.0 device/host controller, and a CAN-FD controller. The Extended Flash Performance (EFP) suffix indicates Microchip's enhanced Flash array process, which delivers higher endurance and lower power consumption compared to the standard Flash variant. Architecturally, the device uses a 2-stage pipeline Cortex-M4F core, a 4-channel Direct Memory Access (DMAC) controller, and a Peripheral Touch Controller (PTC) supporting capacitive touch sensing. The dual-bank Flash allows live firmware updates without downtime, and the integrated Event System allows peripherals to trigger each other without CPU intervention, freeing cycles for application logic. Typical applications include industrial automation controllers, building automation gateways, USB peripherals and Human Interface Devices (HID), CAN-FD nodes in automotive and factory networks, motor control BLDC/PMSM drives, and low-power IoT edge sensors. The wide peripheral mix also makes it suitable for consumer appliances and graphical HMI panels. When designing with this MCU, plan for a 3.3 V LDO or DC-DC regulator with adequate decoupling (100 nF per VDD pin plus bulk 4.7 uF) and ensure SWD traces are length-matched for reliable debug. Use the SERCOM multiplexer to avoid pin conflicts when multiple peripherals are active concurrently. This page synthesizes distributor pricing, drop-in alternatives from the SAM E5x/D5x family, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们
ATSAME51J20A-AUT - 120MHz Cortex-M4F MCU 1MB Flash | Microchip
ATSAME51J20A-AUT

ATSAME51J20A-AUT - 120MHz Cortex-M4F MCU 1MB Flash | Microchip

The Microchip Technology ATSAME51J20A-AUT is a 32-bit ARM Cortex-M4F microcontroller from the SAM E51 family, running up to 120 MHz with single-precision FPU, 1 MB Dual Panel Flash with ECC, and 256 KB SRAM, housed in a 64-pin TQFP (10x10 mm) industrial-grade package rated -40C to +85C. An ARM Cortex-M4F microcontroller is a 32-bit MCU core that integrates a single-precision Floating Point Unit (FPU), DSP extensions, and a Nested Vectored Interrupt Controller (NVIC) on a Harvard bus architecture. Within the SAM E51 product hierarchy, this device sits above Cortex-M0+ parts and below Cortex-M7 SAM S70/E70 parts, occupying the high-performance mid-range tier of Microchip's MCU portfolio. It belongs to the broader power management and embedded control IC category, and is frequently paired with buck converters, LDOs, and external QSPI memory in industrial system designs. Key features of the ATSAME51J20A-AUT include the 120 MHz Cortex-M4F core with FPU and DSP instructions, 1 MB of Dual Panel Flash allowing simultaneous read-while-write, 256 KB SRAM, full-speed USB 2.0 with integrated PHY, CAN-FD, SERCOM interfaces, a 12-bit ADC, DAC, and AES crypto accelerator. The device integrates a high-speed 32-bit ARM Cortex-M4F core with DSP extensions that allow complex signal processing without offloading to a DSP coprocessor. Architecture-wise, the SAM E51 uses a multilayer AHB bus matrix connecting the Cortex-M4F core to high-bandwidth peripherals and SRAM, while peripheral bridges route slower peripherals to the APB bus. The integrated FPU accelerates floating-point math for control loops, and the 1 MB Dual Panel Flash provides deterministic read-while-write operation for field firmware upgrades without halting execution. Typical applications for the ATSAME51J20A-AUT include industrial automation controllers, building automation gateways, USB peripherals and HID devices, automotive body ECUs (non-safety), and IoT edge nodes. The combination of USB, CAN-FD, and high-speed ADC makes it well suited to factory sensor hubs and motor-control front ends. When designing with this part, ensure that the 64-pin TQFP land pattern matches the standard 10x10 mm TQFP footprint so that drop-in alternatives can be substituted without PCB rework. The internal 1.2V LDO requires a 1 uF decoupling capacitor on the core supply pin to maintain stability under dynamic load. This page synthesizes distributor pricing, drop-in SAM E51 alternatives, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们
ATSAME51J20A-AUT-EFP - 120MHz Cortex-M4F MCU 1MB Flash | Microchip
ATSAME51J20A-AUT-EFP

ATSAME51J20A-AUT-EFP - 120MHz Cortex-M4F MCU 1MB Flash | Microchip

The Microchip Technology ATSAME51J20A-AUT-EFP is a 32-bit ARM Cortex-M4F microcontroller from the SAM E51 family, running up to 120 MHz with 1 MB of Dual-Panel Flash (with ECC) and 256 KB SRAM, in a 64-pin TQFP (10x10 mm) package. It integrates a Floating Point Unit, 120 MHz Cortex-M4F core, USB 2.0 Full-Speed with on-chip PHY, CAN-FD, up to six SERCOM interfaces, and a 12-bit ADC. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals (ADC, timers, communication controllers). The Cortex-M4F architecture used here adds single-precision floating-point and DSP instructions, positioning this MCU in the hierarchy: Cortex-M4F core -> ARM Cortex-M family -> 32-bit microcontroller -> embedded processing IC. This part is part of the SAM E5x family, which extends Microchip's SAM D5x/E5x lineup for industrial and general-purpose applications. Key features of the ATSAME51J20A-AUT-EFP include up to 120 MHz core clock with FPU, 1 MB Dual-Panel Flash with ECC, 256 KB SRAM, Full-Speed USB 2.0 with integrated PHY, two CAN-FD controllers, up to six SERCOM channels configurable as UART/SPI/I2C, a 12-bit 1 Msps ADC, and multiple 16-bit timers. The Cortex-M4F DSP extensions accelerate motor-control and signal-processing loops, while the dual-panel architecture enables live firmware updates without downtime. Typical applications include industrial motor control, factory automation, building automation (HVAC, lighting), USB peripherals (HID, CDC, audio class), CAN-FD automotive body controllers, IoT edge nodes with cryptographic firmware loads, and Human-Machine Interface (HMI) panels with TFT displays driven by the integrated SMC peripheral for external memory. When designing with this MCU, note that the AUT-EFP suffix denotes tape-and-reel packaging, extended Flash performance, and the automotive temperature grade (-40C to +125C). For budget-sensitive designs, evaluate ATSAME51G18A series parts; for higher integration with Ethernet, look at the SAME54 family in the same TQFP-64 footprint.

询价 联系我们
ATSAME51J20A-MU - 120MHz Cortex-M4F MCU, 1MB Flash, 64-VQFN | Microchip
ATSAME51J20A-MU

ATSAME51J20A-MU - 120MHz Cortex-M4F MCU, 1MB Flash, 64-VQFN | Microchip

The Microchip Technology ATSAME51J20A-MU is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with a single-precision Floating Point Unit, integrating 1 MB of dual-panel Flash with ECC and 256 KB of SRAM in a 64-pin VQFN (9x9 mm) exposed-pad package. It is part of the SAM E51 high-performance MCU family targeted at industrial and general-purpose connected applications. What is a Cortex-M4F microcontroller? A Cortex-M4F MCU is a 32-bit processor core based on the ARMv7-M architecture with a hardware single-precision Floating Point Unit and a DSP instruction set extension. Within the embedded hierarchy it sits between Cortex-M3 (no FPU) and Cortex-M7 (higher performance, double-precision FPU), and it serves as the workhorse core for industrial control, motor drives, audio processing, and connected IoT endpoints where deterministic interrupt response and floating-point math are both required. Key features of the ATSAME51J20A-MU include a 120 MHz core with 2.14 CoreMark/MHz efficiency, 1 MB dual-panel Flash supporting live in-field updates, 256 KB SRAM, a high-speed 16-channel 1 Msps 12-bit ADC, two 12-bit DACs, USB 2.0 Full-Speed with embedded Host, a CAN-FD controller, SERCOM (configurable serial) interfaces, and an on-board crypto accelerator supporting AES, SHA and TRNG. The integrated 32-channel EVENT system and SmartEEPROM emulation reduce software overhead. Architecturally the device is built around a multi-bus AHB matrix with dedicated SRAM and Flash ports, enabling zero-wait-state execution from Flash at full clock speed. The peripheral DMA controller (DMAC) and dedicated crypto DMA relieve the core from data-movement tasks, and the dual-panel Flash allows read-while-write firmware upgrades without external memory. The 9x9 mm 64-VQFN with exposed thermal pad supports industrial ambient operation from -40 °C to +85 °C. Typical applications include industrial control and Human-Machine Interface (HMI) panels, USB-to-CAN bridges, sensor aggregation nodes, motor control low-end FOC loops, audio front-ends, and connected IoT edge nodes using the integrated crypto block. With USB, CAN-FD, and SERCOM, the same silicon serves as a protocol-conversion gateway between legacy RS-485 and modern fieldbus networks. Designers should pay attention to decoupling: place one 100 nF X7R plus one 10 µF bulk capacitor on each VDD/VDDIO pin pair within 3 mm of the pad, and stitch the exposed pad with at least nine thermal vias to a continuous inner-plane ground for optimal 120 MHz operation. Because the SAM E51 family is footprint-compatible with the SAM D51 family, you can scale memory between 256 KB and 1 MB without PCB rework. This page synthesizes distributor pricing, drop-in alternatives from the same SAM E5x family, and practical PCB layout notes not found in the manufacturer datasheet alone.

询价 联系我们
ATSAME51J20A-MU-EFP - 120MHz Cortex-M4F MCU 1MB Flash | Microchip
ATSAME51J20A-MU-EFP

ATSAME51J20A-MU-EFP - 120MHz Cortex-M4F MCU 1MB Flash | Microchip

The Microchip Technology ATSAME51J20A-MU-EFP is a 32-bit ARM Cortex-M4F microcontroller from the SAM E51/SAME53 family, integrating 1 MB of dual-panel Flash, 256 KB SRAM, and a Floating Point Unit running up to 120 MHz, in a 64-pin VQFN (9x9 mm) exposed-pad package supplied in tray packaging. A microcontroller (MCU) is a single-chip computer that combines a processor core, program and data memory, peripherals, and I/O on one die. The ARM Cortex-M4F core is a mainstream 32-bit processor family augmented by a single-precision FPU and DSP extensions, designed for deterministic real-time control. SAM E51 microcontrollers sit inside the broader hierarchy: ARM Cortex-M -> 32-bit MCU -> embedded microcontroller -> semiconductor. SAME51 also features FPU and DSP extensions that accelerate floating-point math in motor control and signal processing code. Key specifications include 120 MHz core clock, 1 MB dual-panel Flash with ECC, 256 KB SRAM, and a 64-pin VQFN package with 9x9 mm body and an exposed thermal pad. The device integrates a 12-bit ADC, DAC, SERCOM peripherals, USB 2.0 Full-Speed with on-chip PHY, CAN-FD, and a 2-channel 16-bit timer/counter for PWM generation. Integrated SD/MMC host controller and I2S audio interfaces enable storage and digital audio applications. Architecturally, the SAM E51 uses a multi-AHB bus matrix with separate code and system buses, allowing simultaneous Flash fetch and DMA transfers without contention. Error-Correction Code on Flash and SRAM improves reliability in industrial environments. The device operates from 1.71V to 3.6V and includes an on-chip voltage regulator, POR, and brown-out detector. Typical applications include industrial control and Human-Machine Interface (HMI) panels, low-cost motor drives (BLDC, FOC, stepper), IoT edge nodes with USB and CAN connectivity, and consumer devices requiring graphical LCD or audio playback. Its wide peripheral set also suits home automation gateways and Building Automation controllers. When designing with this MCU, place at least four 100 nF decoupling capacitors near the supply pins, plus a bulk 4.7 uF on VDDIN, and solder the exposed thermal pad with multiple thermal vias to the ground plane for thermal dissipation. Use the SAME51 header file and the MPLAB Harmony 3 framework to configure SERCOM, ADC, and timer peripherals, which avoids register-level bugs. This page consolidates distributor pricing, verified drop-in alternatives, and design notes not typically found in the manufacturer datasheet, helping procurement and firmware teams make informed decisions for production.

询价 联系我们