DRV8886PWPR vs DRV8886ATPWP 对比
详细并排对比 DRV8886PWPR 出自 Texas Instruments 和 DRV8886ATPWP 出自 Texas Instruments。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
Texas Instruments
DRV8886ATPWP - 37V 2A Bipolar Stepper Driver | Texas Instruments
DRV8886ATPWP ✓ 量产中规格对比
| 参数 | DRV8886PWPR | DRV8886ATPWP |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 分类 | Motor Drivers | Motor Drivers |
| 生命周期状态 | 有效 | 有效 |
| 库存状态 | 有库存 | 有库存 |
| 单价（USD） | $1.52 | $2.04 |
| Motor Type | Bipolar stepper (2-phase) | Bipolar Stepper |
| Number of Full H-Bridges | 2 | 2 |
| Operating Supply Voltage (VM) | 8 V to 37 V | — |
| Absolute Maximum VM | 40 V | — |
| Full-Scale Output Current (per phase) | 2 A | — |
| RMS Output Current | 1.4 A (24 V, TA = 25 C, PCB-dependent) | 1.4 A (24 V, TA=25°C, PCB design-dependent) |
| Peak Output Current | 3 A | 3 A |
| HS + LS On-Resistance (RDSon) | 550 mOhm | 550 mΩ |
| Microstepping Levels | Up to 1/16 step | Full to 1/16 step |
| Control Interface | STEP / DIR | STEP / DIR (Hardware GPIO) |
| Current Sensing | Internal (no external sense resistor) | — |
| Decay Modes | 8 configurable modes including Smart Tune | Smart tune, mixed, slow, fast (programmable) |
| PWM Chopping Frequency | Up to 50 kHz | Up to 100 kHz |
| Sleep Current | 20 uA (typical) | 20 µA |
| Logic Supply Voltage (VINT) | 3 V to 5.5 V | — |
| 工作温度范围 | -40 C to +125 C | -40°C to +125°C |
| 封装 | HTSSOP-24 (PWP) with PowerPAD | HTSSOP-24 (PWP) PowerPAD |
| 安装类型 | Surface Mount | Surface Mount |
| Protection Features | UVLO, OCP, TSD, open-load detect, charge-pump UV | — |
| Fault Output | nFAULT (active-low, open-drain) | — |
| AEC-Q100 Qualified | No (use DRV8886ATPWP for automotive) | — |
| RoHS 状态 | Compliant | Compliant |
| Load Voltage Rating (VM max) | — | 37 V |
| Minimum Operating VM | — | 8 V |
| Logic Supply Voltage (VCC) | — | 3 V to 5.5 V |
| Full-Scale Output Current | — | 2 A (per H-bridge, 25°C PCB-dependent) |
| Integrated Current Sense | — | Yes (internal sense, no external resistors) |
| AutoTune / Smart Tune Decay | — | Yes |
| Temperature Grade | — | Automotive |
| MSL 等级 | — | 2 (per JEDEC J-STD-020) |
| Terminal Finish | — | Nickel-Palladium-Gold |
| Peak Reflow Temperature | — | 260°C |