DRV8886PWPR vs DRV8886ATPWP Comparison
Detailed side-by-side comparison of DRV8886PWPR by Texas Instruments and DRV8886ATPWP by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
DRV8886ATPWP - 37V 2A Bipolar Stepper Driver | Texas Instruments
DRV8886ATPWP ✓ ActiveSpecification Comparison
| Parameter | DRV8886PWPR | DRV8886ATPWP |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Motor Drivers | Motor Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $1.52 | $2.04 |
| Motor Type | Bipolar stepper (2-phase) | Bipolar Stepper |
| Number of Full H-Bridges | 2 | 2 |
| Operating Supply Voltage (VM) | 8 V to 37 V | — |
| Absolute Maximum VM | 40 V | — |
| Full-Scale Output Current (per phase) | 2 A | — |
| RMS Output Current | 1.4 A (24 V, TA = 25 C, PCB-dependent) | 1.4 A (24 V, TA=25°C, PCB design-dependent) |
| Peak Output Current | 3 A | 3 A |
| HS + LS On-Resistance (RDSon) | 550 mOhm | 550 mΩ |
| Microstepping Levels | Up to 1/16 step | Full to 1/16 step |
| Control Interface | STEP / DIR | STEP / DIR (Hardware GPIO) |
| Current Sensing | Internal (no external sense resistor) | — |
| Decay Modes | 8 configurable modes including Smart Tune | Smart tune, mixed, slow, fast (programmable) |
| PWM Chopping Frequency | Up to 50 kHz | Up to 100 kHz |
| Sleep Current | 20 uA (typical) | 20 µA |
| Logic Supply Voltage (VINT) | 3 V to 5.5 V | — |
| Operating Temperature Range | -40 C to +125 C | -40°C to +125°C |
| Package | HTSSOP-24 (PWP) with PowerPAD | HTSSOP-24 (PWP) PowerPAD |
| Mounting Type | Surface Mount | Surface Mount |
| Protection Features | UVLO, OCP, TSD, open-load detect, charge-pump UV | — |
| Fault Output | nFAULT (active-low, open-drain) | — |
| AEC-Q100 Qualified | No (use DRV8886ATPWP for automotive) | — |
| RoHS Status | Compliant | Compliant |
| Load Voltage Rating (VM max) | — | 37 V |
| Minimum Operating VM | — | 8 V |
| Logic Supply Voltage (VCC) | — | 3 V to 5.5 V |
| Full-Scale Output Current | — | 2 A (per H-bridge, 25°C PCB-dependent) |
| Integrated Current Sense | — | Yes (internal sense, no external resistors) |
| AutoTune / Smart Tune Decay | — | Yes |
| Temperature Grade | — | Automotive |
| MSL Level | — | 2 (per JEDEC J-STD-020) |
| Terminal Finish | — | Nickel-Palladium-Gold |
| Peak Reflow Temperature | — | 260°C |