INA114BU vs INA111BU 对比
详细并排对比 INA114BU 出自 Texas Instruments 和 INA111BU 出自 Texas Instruments。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况,以确定最适合您设计需求的元器件。
Texas Instruments
INA111BU - 2 MHz FET-Input Instrumentation Amplifier | Texas Instruments
INA111BU ✓ 量产中规格对比
| 参数 | INA114BU | INA111BU |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 分类 | Amplifier ICs | Amplifier ICs |
| 生命周期状态 | 有效 | 有效 |
| Amplifier Type | Precision instrumentation amplifier | — |
| Architecture | Three-op-amp design | — |
| Number of Circuits | 1 circuit | — |
| Gain-Bandwidth Product | 1 MHz | 2 MHz |
| Input Offset Voltage | 50 uV | [DATA_NEEDED: input offset voltage] |
| Input Noise Density | 11 nV/√Hz | — |
| Typical Supply Current | 3 mA | — |
| Gain Range | 1 to 10,000 | [DATA_NEEDED: gain range] |
| Gain-Setting Method | One external resistor | — |
| Supply Voltage Range | 2.25 V to 18 V | 6 V to 18 V |
| Input Protection Range | ±40 V | — |
| Slew Rate | 0.06 V/µs | 17 V/us |
| Settling Time | 600 ns | — |
| 工作温度范围 | -40°C to +85°C | -40 C to +85 C |
| 封装 | 16-pin SOIC | 16-pin SOIC |
| 安装类型 | Surface mount | Surface mount |
| Product Type | Low-cost, general-purpose precision instrumentation amplifier | Instrumentation amplifier |
| RoHS 状态 | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| Number of Amplifiers | — | 1 circuit |
| Input Transistor Type | — | FET-input |
| Common-Mode Rejection Ratio | — | 106 dB |
| Input Bias Current | — | Less than 20 pA |
| Maximum Supply Voltage | — | 18 V |
| Input Protection | — | [DATA_NEEDED: input protection rating] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Gain-Setting Resistor | — | [DATA_NEEDED: gain-setting resistor] |
| 静态电流 | — | [DATA_NEEDED: quiescent current] |
| 噪声密度 | — | [DATA_NEEDED: noise density] |
| AEC-Q100 Qualification | — | Not applicable |