INA114BU vs INA111BU השוואה
השוואה מפורטת זה לצד זה של INA114BU מאת Texas Instruments ו INA111BU מאת Texas Instruments. השווה מפרטים עיקריים, פרמטרים חשמליים, אריזה, סטטוס מחזור חיים, תמחור וזמינות כדי לקבוע את הרכיב הטוב ביותר לדרישות העיצוב שלך.
Texas Instruments
INA111BU - 2 MHz FET-Input Instrumentation Amplifier | Texas Instruments
INA111BU ✓ פעילהשוואת מפרטים
| פרמטר | INA114BU | INA111BU |
|---|---|---|
| מותג | Texas Instruments | Texas Instruments |
| קטגוריה | Amplifier ICs | Amplifier ICs |
| סטטוס מחזור חיים | פעיל | פעיל |
| Amplifier Type | Precision instrumentation amplifier | — |
| Architecture | Three-op-amp design | — |
| Number of Circuits | 1 circuit | — |
| Gain-Bandwidth Product | 1 MHz | 2 MHz |
| Input Offset Voltage | 50 uV | [DATA_NEEDED: input offset voltage] |
| Input Noise Density | 11 nV/√Hz | — |
| Typical Supply Current | 3 mA | — |
| Gain Range | 1 to 10,000 | [DATA_NEEDED: gain range] |
| Gain-Setting Method | One external resistor | — |
| Supply Voltage Range | 2.25 V to 18 V | 6 V to 18 V |
| Input Protection Range | ±40 V | — |
| Slew Rate | 0.06 V/µs | 17 V/us |
| Settling Time | 600 ns | — |
| טווח טמפרטורת פעולה | -40°C to +85°C | -40 C to +85 C |
| מארז | 16-pin SOIC | 16-pin SOIC |
| סוג הרכבה | Surface mount | Surface mount |
| Product Type | Low-cost, general-purpose precision instrumentation amplifier | Instrumentation amplifier |
| סטטוס RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| Number of Amplifiers | — | 1 circuit |
| Input Transistor Type | — | FET-input |
| Common-Mode Rejection Ratio | — | 106 dB |
| Input Bias Current | — | Less than 20 pA |
| Maximum Supply Voltage | — | 18 V |
| Input Protection | — | [DATA_NEEDED: input protection rating] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Gain-Setting Resistor | — | [DATA_NEEDED: gain-setting resistor] |
| זרם מנוחה | — | [DATA_NEEDED: quiescent current] |
| צפיפות רעש | — | [DATA_NEEDED: noise density] |
| AEC-Q100 Qualification | — | Not applicable |