INA133UG4 vs INA133U 对比
详细并排对比 INA133UG4 出自 Texas Instruments 和 INA133U 出自 Texas Instruments。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况,以确定最适合您设计需求的元器件。
Texas Instruments
INA133UG4 - 1.5MHz Precision Differential Amplifier | Texas Instruments
INA133UG4 ✓ 量产中规格对比
| 参数 | INA133UG4 | INA133U |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 分类 | Amplifier ICs | Amplifier ICs |
| 生命周期状态 | 有效 | Obsolete |
| Product Type | Precision difference amplifier | Precision difference amplifier |
| Number of Circuits | 1 circuit | — |
| -3 dB Bandwidth | 1.5 MHz | — |
| Slew Rate | 5 V/µs | [DATA_NEEDED: slew rate] |
| Input Offset Voltage | 150 µV minimum; 450 µV maximum | — |
| 静态电流 | 950 µA | — |
| Supply Voltage Range | 4.5 V to 36 V | [DATA_NEEDED: supply voltage range] |
| 输出电压范围 | ±2.25 V to ±18 V | — |
| Differential Gain | 1 V/V | — |
| 封装 | 8-SOIC (0.154 inch, 3.90 mm width) | 8-pin SOIC |
| 安装类型 | Surface mount | Surface mount |
| 工作温度范围 | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | — |
| 噪声密度 | [DATA_NEEDED: input noise density] | — |
| Rail-to-Rail Output | [DATA_NEEDED: rail-to-rail output capability] | — |
| RoHS 状态 | Compliant | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Amplifier Configuration | — | Single amplifier |
| Gain | — | Unity gain |
| Bandwidth | — | 1.5 MHz |
| Offset Voltage | — | 450 µV maximum |
| Offset Voltage Drift | — | 5 µV/°C maximum |
| 电源电流 | — | 0.95 mA typical |
| Input Common-Mode Rejection | — | [DATA_NEEDED: input common-mode rejection] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Resistor Network | — | Laser-trimmed on-chip precision resistor network |
| Common-Mode Rejection Mechanism | — | Matched resistor-network tracking |