LM211DRG4 vs LM211DR 对比
详细并排对比 LM211DRG4 出自 Texas Instruments 和 LM211DR 出自 Texas Instruments。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况,以确定最适合您设计需求的元器件。
Texas Instruments
LM211DRG4 - High-Speed Differential Comparator | Texas Instruments
LM211DRG4 ✓ 量产中规格对比
| 参数 | LM211DRG4 | LM211DR |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 分类 | Amplifier ICs | Amplifier ICs |
| 生命周期状态 | 有效 | 有效 |
| Comparator Type | Single high-speed differential comparator with strobe | Single high-speed differential comparator |
| Number of Channels | 1 channel | — |
| Single-Supply Operation | 5 V | — |
| Positive and Negative Supply Support | Up to ±15 V | — |
| 电源电流 | 5.1 mA | — |
| Logic Compatibility | TTL and MOS output-level compatible | DTL, MOS, RTL, and TTL |
| Output Architecture | Open-collector | — |
| Output Drive Capability | Capable of driving lamps or relays | Lamp or relay switching |
| Input Configuration | Differential inputs: inverting and non-inverting | Differential |
| Strobe Control | Yes | — |
| 工作温度范围 | -40°C to 85°C | [DATA_NEEDED: operating temperature range] |
| 封装 | 8-pin SOIC (D package) | 8-pin SOIC |
| Package Type | SOIC-8 surface-mount package | — |
| 引脚数 | 8 pins | — |
| RoHS 状态 | [DATA_NEEDED: RoHS compliance status] | unknown |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Response Time | — | 115 ns |
| Supply Voltage Range | — | 3.5 V to 30 V |
| Positive Logic Supply Example | — | 5 V |
| Dual-Supply Example | — | ±15 V |
| 输出类型 | — | Open-collector / open-emitter |
| Comparator Quantity | — | 1 comparator |
| 安装类型 | — | Surface mount |
| Strobe Function | — | Differential comparator with strobe |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Current | — | [DATA_NEEDED: output current] |