LM211DRG4 vs LM211DR 비교
다음의 상세 나란히 비교: LM211DRG4 제조: Texas Instruments 및 LM211DR 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | LM211DRG4 | LM211DR |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Comparator Type | Single high-speed differential comparator with strobe | Single high-speed differential comparator |
| Number of Channels | 1 channel | — |
| Single-Supply Operation | 5 V | — |
| Positive and Negative Supply Support | Up to ±15 V | — |
| 공급 전류 | 5.1 mA | — |
| Logic Compatibility | TTL and MOS output-level compatible | DTL, MOS, RTL, and TTL |
| Output Architecture | Open-collector | — |
| Output Drive Capability | Capable of driving lamps or relays | Lamp or relay switching |
| Input Configuration | Differential inputs: inverting and non-inverting | Differential |
| Strobe Control | Yes | — |
| 동작 온도 범위 | -40°C to 85°C | [DATA_NEEDED: operating temperature range] |
| 패키지 | 8-pin SOIC (D package) | 8-pin SOIC |
| Package Type | SOIC-8 surface-mount package | — |
| 핀 수 | 8 pins | — |
| RoHS 상태 | [DATA_NEEDED: RoHS compliance status] | unknown |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Response Time | — | 115 ns |
| Supply Voltage Range | — | 3.5 V to 30 V |
| Positive Logic Supply Example | — | 5 V |
| Dual-Supply Example | — | ±15 V |
| 출력 유형 | — | Open-collector / open-emitter |
| Comparator Quantity | — | 1 comparator |
| 실장 유형 | — | Surface mount |
| Strobe Function | — | Differential comparator with strobe |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Current | — | [DATA_NEEDED: output current] |