MAX232EPE vs ADM202EAN 对比
详细并排对比 MAX232EPE 出自 Maxim Integrated 和 ADM202EAN 出自 Analog Devices。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
Maxim Integrated
MAX232EPE+ - +5V RS-232 Transceiver, 2/2, 16-PDIP | Maxim Integrated
MAX232EPE ✓ 量产中Analog Devices
ADM202EAN - Dual RS-232 Driver/Receiver, 5V, 16-PDIP | Analog Devices
ADM202EAN ✓ 量产中规格对比
| 参数 | MAX232EPE | ADM202EAN |
|---|---|---|
| 品牌 | Maxim Integrated | Analog Devices |
| 分类 | Interface ICs | Interface ICs |
| 生命周期状态 | 有效 | 有效 |
| Product Type | RS-232 Transceiver (Driver/Receiver) | — |
| Drivers / Receivers | 2 / 2 | — |
| 电源电压 | 4.5 V to 5.5 V (single +5V supply) | 5 V |
| 数据速率 | 120 kbps (typical) | 230 kbit/s |
| RS-232 Output Voltage | ±10 V (typical, generated internally by charge pump) | — |
| 工作温度 | -40 C to +85 C (extended industrial) | — |
| 封装 | 16-PDIP (Plastic DIP, 0.300 inch / 7.62 mm) | 16-pin PDIP |
| 安装类型 | Through-Hole | Through-hole |
| External Charge-Pump Capacitors | 4 x 1 uF (typical, tantalum or ceramic) | — |
| ESD Protection | ±15 kV HBM on RS-232 pins (per Maxim datasheet family) | — |
| Receiver Input Levels | ±30 V tolerant | — |
| Standards Compliance | EIA/TIA-232E, V.28, V.24 | — |
| MSL 等级 | 1 (unlimited) | — |
| RoHS 状态 | Compliant (lead-free + indicates lead-free finish) | [DATA_NEEDED: RoHS status] |
| 引脚数量 | 16 | — |
| Number of Channels | — | 2 channels |
| 接口类型 | — | RS-232 line driver/receiver |
| RS-232 Output Levels | — | ±10 V |
| Charge-Pump Capacitor Value | — | 0.1 µF minimum |
| RS-232 Compliance | — | TIA/EIA-232-E and V.28 |
| ESD Protection, Contact | — | 8 kV |
| ESD Protection, Air Gap | — | 15 kV |
| ESD Protection, Human Body Model | — | 15 kV |
| EMC Directive | — | 89/336/EEC |
| Fast Transient Burst Immunity | — | IEC 61000-4-4 |
| EMI Emissions Reference | — | EN 55022 |
| Supply Configuration | — | Single 5 V supply |
| Driver Slew Rate | — | [DATA_NEEDED: driver slew rate] |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| 工作温度范围 | — | [DATA_NEEDED: operating temperature range] |
| REACH Status | — | [DATA_NEEDED: REACH status] |