MAX232EPE vs ADM202EAN 비교
다음의 상세 나란히 비교: MAX232EPE 제조: Maxim Integrated 및 ADM202EAN 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Maxim Integrated
MAX232EPE+ - +5V RS-232 Transceiver, 2/2, 16-PDIP | Maxim Integrated
MAX232EPE ✓ 활성사양 비교
| 파라미터 | MAX232EPE | ADM202EAN |
|---|---|---|
| 브랜드 | Maxim Integrated | Analog Devices |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | RS-232 Transceiver (Driver/Receiver) | — |
| Drivers / Receivers | 2 / 2 | — |
| 공급 전압 | 4.5 V to 5.5 V (single +5V supply) | 5 V |
| 데이터 속도 | 120 kbps (typical) | 230 kbit/s |
| RS-232 Output Voltage | ±10 V (typical, generated internally by charge pump) | — |
| 동작 온도 | -40 C to +85 C (extended industrial) | — |
| 패키지 | 16-PDIP (Plastic DIP, 0.300 inch / 7.62 mm) | 16-pin PDIP |
| 실장 유형 | Through-Hole | Through-hole |
| External Charge-Pump Capacitors | 4 x 1 uF (typical, tantalum or ceramic) | — |
| ESD Protection | ±15 kV HBM on RS-232 pins (per Maxim datasheet family) | — |
| Receiver Input Levels | ±30 V tolerant | — |
| Standards Compliance | EIA/TIA-232E, V.28, V.24 | — |
| MSL 레벨 | 1 (unlimited) | — |
| RoHS 상태 | Compliant (lead-free + indicates lead-free finish) | [DATA_NEEDED: RoHS status] |
| 핀 수 | 16 | — |
| Number of Channels | — | 2 channels |
| 인터페이스 유형 | — | RS-232 line driver/receiver |
| RS-232 Output Levels | — | ±10 V |
| Charge-Pump Capacitor Value | — | 0.1 µF minimum |
| RS-232 Compliance | — | TIA/EIA-232-E and V.28 |
| ESD Protection, Contact | — | 8 kV |
| ESD Protection, Air Gap | — | 15 kV |
| ESD Protection, Human Body Model | — | 15 kV |
| EMC Directive | — | 89/336/EEC |
| Fast Transient Burst Immunity | — | IEC 61000-4-4 |
| EMI Emissions Reference | — | EN 55022 |
| Supply Configuration | — | Single 5 V supply |
| Driver Slew Rate | — | [DATA_NEEDED: driver slew rate] |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| 동작 온도 범위 | — | [DATA_NEEDED: operating temperature range] |
| REACH Status | — | [DATA_NEEDED: REACH status] |