A3P015-1QNG68 - 49-I/O ProASIC3 FPGA | Microchip Technology
料号: A3P015-1QNG68 ✗ 停产A3P015-1QNG68 概述
An FPGA is a programmable semiconductor whose digital logic is configured after fabrication. The ProASIC3 architecture belongs to the broader hierarchy of programmable logic devices, alongside CPLDs, and is commonly used where a design requires more logic flexibility than a fixed-function application-specific integrated circuit. Unlike a microcontroller-centric implementation, an FPGA performs configured logic operations in parallel and can be useful for protocol handling, data formatting, control logic, and high-speed interface functions.
The A3P015-1QNG68 provides 49 I/O in a 68-VFQFN exposed-pad package. This combination gives board designers a relatively high pin count for integrating external memories, converters, transceivers, and general-purpose logic. The exposed pad is an important thermal and electrical feature because it connects to the device ground structure and provides a substantial underside heat-transfer path when the PCB is assembled with suitable thermal design practices.
ProASIC3 devices combine programmable logic blocks with embedded flash-based configuration memory. This nonvolatile configuration approach allows the FPGA to retain its programmed logic configuration without requiring a continuous external configuration source. The resulting circuit can operate as a dedicated logic subsystem immediately after power-up, which is advantageous in control, communications, instrumentation, and industrial automation equipment.
Typical uses include industrial control modules, serial-interface bridges, data acquisition front ends, embedded protocol controllers, and compact logic platforms. A design can use the 49 available I/O for external bus connections, control signals, clock interfaces, and status reporting. Exact logic capacity, voltage ratings, timing grades, and recommended operating conditions should be established from the manufacturer datasheet and pin-description tables before schematic capture or PCB release.
For a new board, preserve the exposed-pad land pattern and connect it to the ground plane according to the manufacturer package drawing. Place decoupling capacitors close to the applicable supply pins and route high-speed signals with controlled impedance. Because this is a legacy ProASIC3 ordering configuration, lifecycle status, programming support, and long-term availability should be confirmed before committing a production design.
This product record consolidates the exact MPN, 49-I/O configuration, 68-VFQFN exposed-pad package information, family identity, verified source links, structured cross-references, and practical selection guidance. It is intended to help engineers identify the correct legacy FPGA and evaluate pin-compatible family options without confusing an exact replacement with a merely related part.
直接替换替代料: A3P015-1QNG68 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: A3P015-1QNG68 (相同外形与封装尺寸) ——差异在于 Core Supply Voltage, Process Technology, User I/O Count, AEC-Q100 Qualification, Device Type.
A3P015-QNG68I
✅ 直接替换联系询价
查看数据手册 →A3P015-QNG68
✅ 直接替换联系询价
查看数据手册 →A3P015-QNG68PS32
✅ 直接替换📋 参考替代料(不在目录中)
A3PN015-1QNG68
✅ 直接替换📋 参考替代料(不在目录中)
A3P030-QN68I
✅ 直接替换📋 参考替代料(不在目录中)
A3P030-QNG68I
✅ 直接替换联系询价
查看数据手册 →A3P015-1QNG68 最大额定值与电气特性
| Device Type | Field-Programmable Gate Array (FPGA) |
| FPGA Family | ProASIC3 |
| Number of I/O | 49 I/O |
| Package Type | 68-VFQFN with Exposed Pad |
| Total Package Pins | 68 pins |
| 安装类型 | Surface Mount |
A3P015-1QNG68 68 pins 引脚配置指南
A3P015-1QNG68(68 pins 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: A3P015-1QNG68.
请参阅 数据手册 以查看完整引脚配置。
典型应用
A3P015-1QNG68 适用于 6 应用s: Industrial Control Logic, Serial Interface Bridging, Data Acquisition Front End, Communication Protocol Controller, Embedded Protocol Controller, Legacy Equipment Retrofit.
Industrial Control Logic
The A3P015-1QNG68 fits compact industrial control modules that require programmable logic for sequencing, interlocks, and actuator control. Its ProASIC3 architecture provides a field-configurable alternative to a fixed gate array, while 49 I/O in a 68-VFQFN exposed-pad package leaves sufficient connections for sensors, relay drivers, status indicators, and communications. The device consolidates parallel control functions without relying on a fixed logic map. Before release, verify the exact timing grade, supply limits, I/O standards, and temperature range against the manufacturer documentation.
推荐
Serial Interface Bridging
The A3P015-1QNG68 can implement protocol conversion, framing, and data-routing functions between serial and parallel domains. Forty-nine I/O provide connections for multiple data buses, chip selects, clock signals, and control lines within the 68-VFQFN exposed-pad footprint. ProASIC3 nonvolatile configuration also permits the interface behavior to be retained as a dedicated logic function after startup. Validate pin multiplexing, timing constraints, clocking, and I/O voltage compatibility using the official device tables before releasing the layout.
推荐
Data Acquisition Front End
A3P015-1QNG68 is suitable for the digital portion of a data-acquisition front end that must coordinate converters, sample control, buffering, and host communications. The 49 available I/O allow parallel converter data, control signals, trigger paths, and status signals to be integrated on a relatively compact board. Programmable logic can be adapted to different sampling and protocol requirements without changing the physical device. Engineering checks should include signal-integrity margins, clock-jitter assumptions, ground-plane continuity, and thermal performance of the exposed pad.
推荐
Communication Protocol Controller
The A3P015-1QNG68 can serve as a dedicated communication protocol controller in equipment requiring deterministic parallel logic and multiple external interfaces. Its 49 I/O support transmit and receive data paths, flow control, interrupts, clocking, and configuration access within a 68-VFQFN package. Programmable ProASIC3 logic is useful for custom packet handling, bit manipulation, and legacy protocol support. The design must confirm throughput, timing closure, clock-domain structure, configuration retention, and whether the legacy device remains suitable for the product's maintenance period.
推荐
Embedded Protocol Controller
A3P015-1QNG68 is appropriate when a product needs an embedded protocol engine that operates alongside a host processor or microcontroller. The FPGA fabric can implement command parsing, state machines, checksum generation, buffering, and peripheral interfacing without occupying a separate fixed-function controller. Forty-nine I/O in a 68-VFQFN exposed-pad package support a mixed set of bus, control, and interrupt connections. Review the pinout and memory-resource requirements carefully, especially when migrating toward A3PN015 or A3P030 alternatives, because their resource distributions may not map automatically.
推荐
Legacy Equipment Retrofit
The A3P015-1QNG68 is useful for maintaining or retrofitting legacy equipment whose existing PCB uses the 49-I/O, 68-VFQHN exposed-pad ProASIC3 footprint. A documented option such as A3P015-QNG68I can be evaluated for replacement without changing the board outline, although temperature grade, timing grade, configuration data, and pin behavior must still match. The obsolete lifecycle status makes design continuity and long-term support important selection factors. Obtain the original schematics and pin tables, then verify every power, ground, clock, and I/O connection before fitting a substitute.
推荐
推荐产品汇总
工程参考数据: A3P015-1QNG68 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | A3P015-QNG68I | A3P015-QNG68 | A3P015-QNG68PS32 | A3PN015-1QNG68 | A3P030-QN68I | A3P030-QNG68I |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 68-VFQFN with Exposed Pad | 68-VFQFN with Exposed Pad | 68-VFQFN with Exposed Pad | 68-VFQFN with Exposed Pad | 68-VFQFN with Exposed Pad | 68-QFN | 68-QFN |
| FPGA Family | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 | ProASIC3 nano | ProASIC3 | ProASIC3 |
| Ordering Suffix | -1QNG68 | -QNG68I | -QNG68 | -QNG68PS32 | -1QNG68 | -QN68I | -QNG68I |
关键差异点
- Closest documented family-level replacement (对比 A3P015-QNG68I)
- Direct same-family ordering alternative (对比 A3P015-QNG68)
- Same-footprint ProASIC3 nano path (对比 A3PN015-1QNG68)
- Higher-density ProASIC3 family option (对比 A3P030-QNG68I)
设计说明
The 68-VFQFN exposed pad is the primary heat-transfer path and should be connected to a low-impedance ground structure on the PCB. Follow the manufacturer's land-pattern dimensions, use a continuous ground plane beneath the device where permitted, and minimize thermal-via resistance by placing multiple vias near the pad. For new designs, calculate worst-case junction temperature from the actual logic activity, supply voltage, ambient temperature, and PCB thermal resistance before selecting the legacy device for a new platform.
Preserve the exact 68-VFQFN land pattern, pad dimensions, solder-mask geometry, and exposed-pad definition from the official package drawing. Do not derive the footprint from the 49-I/O count because the package also contains power, ground, configuration, and other fixed pins. Confirm the PCB library, assembly stencil, pin-1 orientation, and exposed-pad soldering process against the manufacturer drawing before fabrication.
Assign the 49 I/O only after checking the official pin-description table and the design's voltage domains. Keep configuration signals, clock inputs, and programmable I/O from conflicting with dedicated power or ground pins. Route clocks and high-speed interfaces away from noisy switching nodes, provide short return paths, and place local decoupling capacitors close to the relevant supply pins using the recommended network from the manufacturer application guidance.
Avoid treating the related A3P015, A3PN015, and A3P030 listings as automatically interchangeable merely because their package names are similar. Confirm the exact ordering suffix, speed grade, temperature grade, pin functions, configuration method, logic resources, embedded-memory organization, and supply constraints. For a populated legacy board, compare every net and programming file before fitting a substitute to prevent configuration, timing, or I/O-level failures.
Design the supply rails around the exact core and I/O voltage requirements listed by Microchip for the selected ordering code. Verify sequencing, startup behavior, current limits, and the permissible combinations of I/O voltage and core voltage. If the FPGA is replaced, recalculate rail requirements because a footprint-compatible family member may have different internal power architecture even when its external package and I/O count are the same.
合规信息
No product-specific environmental or material-compliance declaration for this exact ordering code was identified. Confirm compliance with Microchip Technology using the exact MPN before release.