A3P030-QNG68I - 30K Gate, 231 MHz ProASIC3 FPGA | Microchip
料号: A3P030-QNG68I ✗ 停产A3P030-QNG68I 概述
A field-programmable gate array is a semiconductor device whose digital logic functions are defined through programmable configuration data. Within the product hierarchy, an FPGA sits above fixed-function logic and complex programmable logic devices. Unlike a mask-programmable ASIC, an FPGA can be reconfigured during development, production, or field updates. The ProASIC3 architecture combines configurable logic, embedded memory, programmable I/O, and serial configuration capabilities within one integrated device.
The A3P030-QNG68I provides approximately 30,000 logic gates, 49 user I/O, and a maximum stated operating frequency of 231 MHz. Its 1.5 V core voltage and 130 nm CMOS process identify it as a compact, low-density device intended for cost-sensitive embedded designs. The 68-pin QFN exposed-pad package supports dense PCB layouts while providing a thermal path beneath the device, which is important when programmed logic drives continuous I/O activity.
ProASIC3 devices are supported by the manufacturer's FPGA development and programming workflow. Designers use vendor-supported tools to create the logic design, assign pins, generate programming files, and configure the device through its supported configuration interface. Because this is a flash-family FPGA, configuration storage and user programming flow follow the ProASIC3 programming model rather than the volatile-only workflow used by some other programmable-logic devices.
Typical applications include industrial control modules, sensor and instrument interfaces, communications adapters, embedded protocol bridges, and compact embedded systems requiring programmable logic beside a microcontroller. The 49 available I/O make the device suitable for parallel data collection, digital control, status signaling, and peripheral interfacing when the design does not require the larger I/O count or gate density of a higher-capacity FPGA.
PCB implementation should follow the manufacturer's QFN exposed-pad land pattern and pinout documentation. The exposed pad is part of the thermal and electrical footprint, so its solder lands should be filled or connected according to the recommended land pattern and assembly process. Signal-routing discipline, especially around configuration pins and clock inputs, remains important even at the comparatively modest 231 MHz device speed.
This page combines the exact device identity, package details, sourced technical characteristics, drop-in replacement options, and application-focused engineering guidance. It also distinguishes direct package-compatible replacements from merely similar FPGA families, helping designers confirm board-level compatibility before committing to a component change.
直接替换替代料: A3P030-QNG68I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: A3P030-QNG68I (相同外形与封装尺寸) ——差异在于 Package, Process Technology, Product Type, Core Supply Voltage, User I/O Count.
A3P030-1QNG68
✅ 直接替换联系询价
查看数据手册 →A3P030-2QNG68I
✅ 直接替换联系询价
查看数据手册 →A3P030-QNG68
✅ 直接替换联系询价
查看数据手册 →A3P030-QNG68C
✅ 直接替换📋 参考替代料(不在目录中)
AGL030-V5-QNG68I
✅ 直接替换📋 参考替代料(不在目录中)
A3P030-QNG68I 最大额定值与电气特性
| FPGA Family | ProASIC3 |
| Logic Gate Count | 30,000 gates |
| Maximum Frequency | 231 MHz |
| Core Supply Voltage | 1.5 V |
| Process Technology | 130 nm CMOS |
| User I/O Count | 49 I/O |
| Package Type | 68-pin QFN with exposed pad |
| Package Pin Count | 68 pins |
| 安装类型 | Surface mount |
| Programming Technology | Flash-based FPGA |
| Programming Interface | ProASIC3 serial configuration interface |
| Shipping Package | Tray |
| Product Type | Field-programmable gate array |
| Logic Density Class | 30K-gate class |
| RoHS 状态 | Unknown |
| REACH Status | Unknown |
| AEC-Q100 Qualification | Not stated |
A3P030-QNG68I tray 引脚配置指南
A3P030-QNG68I(tray 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: A3P030-QNG68I.
请参阅 数据手册 以查看完整引脚配置。
典型应用
A3P030-QNG68I 适用于 6 应用s: Industrial Control Logic, Industrial Sensor Interface, Communications Adapter, Test and Measurement Instrument, Embedded Protocol Bridge, Programmable Signal Conditioning.
Industrial Control Logic
The A3P030-QNG68I is appropriate for compact control modules that need deterministic programmable logic alongside a host controller. Its 30,000-gate density and 49 I/O can implement sequencing, interlocks, timer blocks, fault detection, and parallel digital interfaces without moving to a larger FPGA. The 231 MHz maximum stated frequency provides margin for ordinary control paths, while the 1.5 V core and 68-pin QFN exposed-pad package support dense industrial controller layouts. Validate timing against the selected speed and temperature suffix, and use the manufacturer power and decoupling recommendations for the final logic utilization.
Industrial Sensor Interface
The A3P030-QNG68I can serve as a programmable interface between sensors, analog front ends, and an embedded processor. Its 49 I/O provide enough parallel lanes for multiplexed sensor channels, digital sensor buses, latch inputs, and status outputs, while the 30K-gate budget supports filtering and protocol conversion. The 231 MHz device class is suitable for capturing and formatting data in a compact instrumentation design. Because voltage and timing rules vary by I/O bank, check the manufacturer's electrical tables and confirm that the QFN exposed pad is routed according to the recommended land pattern.
Communications Adapter
A3P030-QNG68I-based hardware can adapt legacy parallel signals to a serial communications architecture. The programmable logic can implement framing, byte alignment, FIFO control, CRC processing, and supervisory state machines while the 49 I/O connect to external transceivers and data buses. Its 30K gates and 231 MHz maximum stated frequency suit moderate-throughput embedded links, and flash-based configuration supports design revisions during commissioning. Designers should budget external transceiver time, observe setup and hold constraints, and verify configuration-pin sharing because those functions can affect normal user operation.
Test and Measurement Instrument
The A3P030-QNG68I is useful in compact test and measurement modules requiring parallel acquisition control, trigger routing, timing generation, or data-format conversion. Forty-nine I/O can connect to sensors, relay drivers, display interfaces, and status indicators, while the 30K-gate ProASIC3 resource class supports moderate control logic rather than demanding signal processing. The 231 MHz maximum stated frequency allows reasonably fast parallel control paths. For metrology accuracy, separate analog circuitry from digital return paths and follow the manufacturer's grounding and exposed-pad thermal recommendations.
Embedded Protocol Bridge
The A3P030-QNG68I can bridge two dissimilar embedded interfaces by translating signal timing, buffering data, and coordinating handshakes. Its 49 I/O and 30,000 gates permit concurrent protocol conversion, command parsing, and status reporting in a compact system, while the 231 MHz maximum stated frequency supports common serial and parallel embedded interfaces. The 1.5 V core may also simplify integration with modern digital subsystems. Confirm I/O voltage limits, configuration behavior, and timing margins for both bridged interfaces before using it as a production replacement.
Programmable Signal Conditioning
In data-acquisition and instrumentation systems, the A3P030-QNG68I can implement digital signal conditioning, pulse shaping, event counting, and parallel-to-serial conversion ahead of an ADC or processor. The 49 I/O support multiple synchronized channels, and the 30K-gate capacity accommodates modest pipelines and control state machines. Its 231 MHz maximum stated frequency is adequate for many signal-conditioning tasks but is not a substitute for a high-speed transceiver in demanding channel rates. Keep clock routing short, follow the recommended QFN land pattern, and validate setup, hold, and skew assumptions in timing analysis.
工程参考数据: A3P030-QNG68I ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | A3P030-1QNG68 | A3P030-2QNG68I | A3P030-QNG68 | A3P030-QNG68C | AGL030-V5-QNG68I |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 68-pin QFN with exposed pad | 68-pin VFQFN with exposed pad - same footprint class | 68-pin QFN with exposed pad - same footprint class | 68-pin QFN with exposed pad - same footprint class | 68-pin QFN with exposed pad - same footprint class | 68-pin QFN with exposed pad - same footprint class |
| Logic Gate Count | 30,000 gates | 30,000 gates | 30,000 gates | 30,000 gates | 30,000 gates | 30,000 gates |
| User I/O Count | 49 I/O | 49 I/O | 49 I/O | 49 I/O | 49 I/O | 49 I/O |
关键差异点
- Exact industrial I-grade ordering configuration (对比 A3P030-QNG68C)
- Direct ProASIC3 family package continuity (对比 A3P030-1QNG68)
- Matches the common A3P030 production footprint (对比 AGL030-V5-QNG68I)
设计说明
Implement the 68-pin QFN footprint and exposed pad exactly as shown in the manufacturer package drawing. Place supply and decoupling connections close to the relevant device pins, and follow the recommended exposed-pad via pattern so the package can dissipate heat reliably. The exposed pad is not a substitute for a conventional ground pin; use the device-specific pin table to determine its required electrical connection.
Route clocks and configuration signals away from high-slew-rate outputs, particularly when the design uses external transceivers or switching power converters. Keep the configuration interface clean, use short clock paths, and observe setup and hold requirements during timing closure. The 231 MHz maximum stated frequency is a device capability rather than a guarantee that every I/O combination meets the same timing.
Do not substitute an A3P030 order code solely because it uses the same 68-pin QFN package. Speed suffixes, temperature suffixes, I/O limits, configuration behavior, and qualification can differ even when the gate count and package match. Approve a replacement only after comparing the complete manufacturer pin tables and electrical characteristics, and preserve the programmed configuration file appropriate for each exact order code.
合规信息
No specific compliance declaration was identified for the exact A3P030-QNG68I order code. Confirm environmental, material, and automotive qualification requirements with the manufacturer before production release.