A54SX32A-BGG329I - 32K Gate Antifuse FPGA 329-BGA | Microchip
料号： A54SX32A-BGG329I ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $1 | $1.00 |
| 10 | $1 | $10.00 |
| 100 | $1 | $100.00 |
| 500 | $1 | $500.00 |
| 1,000 | $1 | $1,000.00 |
A54SX32A-BGG329I 概述
An antifuse FPGA is a programmable logic device whose interconnect switches are permanently set at programming time. Unlike SRAM FPGAs, antifuse devices are non-volatile, power up instantly with no external configuration device, and are highly resistant to configuration corruption, making them a distinct branch of the FPGA family tree that suits aerospace, industrial, and long-lifecycle embedded systems.
Key features of the SX-A family include 0.22 um / 0.25 um CMOS antifuse fabrication, multi-voltage I/O support for 2.5 V, 3.3 V, and 5 V signaling, sub-microsecond instant-on power-up, low static power, and deterministic interconnect delays that simplify timing closure. According to Microchip product data, SX-A devices integrate multiple functions into a low-cost, single-chip solution while combining performance, security, and low power.
Architecturally, the SX-A uses a sea-of-modules architecture built from fine-grained logic modules and routing resources, which simplifies design migration and delivers high gate utilization. The -BGG329I suffix indicates the industrial temperature grade (-40C to +85C ambient), ball-grid-array packaging with 329 balls, and standard speed grade.
Typical applications include glueless bus bridging, industrial control logic consolidation, telecom line-card control, aerospace legacy design sustainment, and test equipment state machines, where instant-on, single-chip, tamper-resistant logic integration is valued.
When designing with this device, plan the power distribution for 2.5 V core and selectable I/O bank voltages, and follow Microchip antifuse programming and IBIS guidance for signal integrity on high-fanout nets.
This page synthesizes distributor pricing context, same-package drop-in grade variants, and practical design notes not consolidated in the manufacturer datasheet.
直接替换替代料： A54SX32A-BGG329I ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： A54SX32A-BGG329I （相同外形与封装尺寸） ——差异在于 Package, System Gates, Process Technology, Speed Grade, Logic Cells.
快速对比工具——选择替代料号进行并排对比：
A54SX32A-1BGG329I
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$57.8 / 个
查看数据手册 →A54SX32A-2BGG329I
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$95 / 个
查看数据手册 →A54SX32A-BGG329M
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$97.6 / 个
查看数据手册 →A54SX32A-1BGG329M
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$82 / 个
查看数据手册 →A54SX32A-2BGG329
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
联系询价
查看数据手册 →A54SX32A-1BGG329
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$47.6 / 个
查看数据手册 →A54SX32A-FBGG329
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$89.9 / 个
查看数据手册 →A54SX32A-BGG329I 最大额定值与电气特性
| Family | SX-A (Antifuse FPGA) |
| System Gates | 32000 gates (Mouser lists 48K system gates for SXA family) |
| Logic Cells / Modules | 1800 cells |
| Number of I/O | 249 |
| Maximum System Frequency | 238 MHz |
| Process Technology | 0.25 um CMOS antifuse |
| Core Supply Voltage | 2.5 V |
| I/O Voltage Support | 2.5 V, 3.3 V, 5 V |
| Configuration Type | Antifuse (one-time programmable, non-volatile) |
| 封装 | 329-BBGA (BGG329) |
| 安装类型 | Surface Mount |
| 工作温度 | -40C to +85C (I grade) |
| Speed Grade | Standard (-BGG329I) |
| Programming Method | Antifuse programmer (one-time) |
| Architecture | Sea-of-modules, fine-grained |
A54SX32A-BGG329I 329-bbga (bgg329) 引脚配置指南
A54SX32A-BGG329I（329-bbga (bgg329) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： A54SX32A-BGG329I.
请参阅 数据手册 以查看完整引脚配置。
典型应用
A54SX32A-BGG329I 适用于 6 应用s: Industrial Control Logic Consolidation, Aerospace and Defense Legacy Sustainment, Telecom Line-Card Control and Bridge Logic, Test and Measurement Equipment, Secure Embedded Controllers, Obsolescence-Driven Redesign of Legacy SX Designs.
Industrial Control Logic Consolidation
The A54SX32A-BGG329I consolidates discrete PLD, glue logic, and bus-interface functions into one 32K-gate antifuse chip, reducing board area and BOM count in PLC modules and motor-control backplanes. Its 249 user I/O with 5 V tolerant capability interfaces directly with legacy 5 V industrial signaling (TTL-level sensors, optocoupler outputs) without level shifters, while the 238 MHz performance ceiling comfortably covers PCI-class local buses and high-speed state machines. Because the antifuse configuration is non-volatile and immune to configuration upset from industrial electrical noise, the FPGA is operational within microseconds of power application - critical for safety interlock logic that must be valid at power-up. Place it between the backplane connector and local microcontroller, with I/O banks powered at the bus voltage and the 2.5 V core fed from a local buck regulator.
推荐
Aerospace and Defense Legacy Sustainment
Aerospace line-replaceable units designed in the 2000s frequently specified Actel SX-A antifuse FPGAs, and the A54SX32A-BGG329I remains a primary sustainment part. Its instant-on, one-time-programmable configuration eliminates configuration-storage failure modes and configuration-reading attack surfaces valued in defense platforms, and deterministic interconnect delays simplify DO-254-style timing analysis on moderately complex control logic. With the industrial I grade covering -40C to +85C and a stable, decades-long Microchip lifecycle, the part supports obsolescence-mitigation buys. Designers should lock the programming file revision, verify leaded versus lead-free ball metallurgy against the platform solder process, and treat any radiation requirement assessment separately, since this is a COTS device rather than a radiation-hardened RTAX part.
推荐
Telecom Line-Card Control and Bridge Logic
In telecom line cards and network shelves, the A54SX32A-BGG329I serves as a single-chip bridge between system backplanes and card-level PHYs, replacing multiple CPLDs and discrete buffers. Its multi-voltage I/O (2.5 V, 3.3 V, and 5 V signaling) matches the mixed-voltage legacy of telecom racks, allowing direct connection to both 3.3 V transceivers and 5 V alarm inputs. The 238 MHz system performance covers TDM backplane interfaces and local bus arbitration, while low static antifuse power keeps card idle current within shelf power budgets - an advantage over SRAM FPGAs that draw configuration-retention current. Hot-board insertion sequencing should be analyzed against the 2.5 V core supply ramp, and I/O bank assignment should group same-voltage signals to minimize level-shifting components around the 249-ball perimeter.
推荐
Test and Measurement Equipment
Bench instruments and automated test equipment use the A54SX32A-BGG329I as a deterministic timing sequencer, trigger logic engine, and pattern generator. The fine-grained sea-of-modules architecture gives predictable interconnect delays, which matters for sub-10 ns trigger paths where SRAM FPGA routing variance complicates calibration. Its instant-on behavior means the instrument logic is live before the operator completes front-panel setup, and the one-time-programmable antifuse prevents accidental or malicious reconfiguration of calibration-critical logic in fielded units. With 249 I/O, the device can directly drive pin-electronics heads and relay-control banks, while 5 V tolerant banks interface with legacy instrumentation buses. Keep high-fanout clock nets on dedicated routing per Microchip's timing guidelines and simulate signal integrity for BGA escape patterns above 100 MHz toggle rates.
推荐
Secure Embedded Controllers
The A54SX32A-BGG329I fits secure embedded controllers where the design must resist configuration extraction. Antifuse programming physically burns interconnect links, so no bitstream exists in the system to read back, unlike SRAM FPGAs whose configuration flash can be cloned or tampered with. The device implements secure boot-glue, authentication state machines, and access-control logic for industrial and infrastructure controllers. Because configuration is permanent, teams should treat programming as a controlled manufacturing step with golden programming files and verified programmer settings, and budget spare programmed spares for field service. The industrial temperature grade supports uncontrolled environments, and the absence of a configuration device removes an entire failure and attack class from the FMEA. Combine with a microcontroller such as a PIC32 for command processing while the FPGA enforces hard-wired policy.
推荐
Obsolescence-Driven Redesign of Legacy SX Designs
Boards originally built around the non-A A54SX32 in BG329 packaging can migrate to the A54SX32A-BGG329I with minimal engineering effort: the SX-A family is the direct enhancement of the SX family, and Microchip maintains design-tool support for migrating SX projects to SX-A. The 0.25 um process raises performance to 238 MHz, reduces power, and lowers cost, while preserving the architectural model and library familiarity. Engineers should re-run timing with SX-A library delays, verify the ball map against the new footprint since BG329 and BGG329 ball assignments differ, and validate I/O standards where the original design used 5 V TTL at the perimeter. This application suits long-lifecycle industrial, medical, and transportation equipment where a full FPGA redesign is unjustified but the silicon source is aging.
推荐
推荐产品汇总
工程参考数据： A54SX32A-BGG329I ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | A54SX32A-1BGG329I | A54SX32A-2BGG329I | A54SX32A-BGG329M | A54SX32A-1BGG329M | A54SX32A-2BGG329 |
|---|---|---|---|---|---|---|
| Package | 329-BBGA (BGG329) | 329-BBGA - same | 329-BBGA - same | 329-BBGA - same | 329-BBGA - same | 329-BBGA - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 32K | 32K | 32K | 32K | 32K | 32K |
| User I/O | 249 | 249 | 249 | 249 | 249 | 249 |
| Speed Grade | Standard | -1 (faster) | -2 (fastest) | Standard | -1 | -2 |
| Temperature Grade | Industrial (I, -40C to +85C) | Industrial (I) | Industrial (I) | Commercial (M) | Commercial (M) | Commercial (M) |
| Core Voltage | 2.5 V | 2.5 V | 2.5 V | 2.5 V | 2.5 V | 2.5 V |
| Configuration Type | Antifuse (one-time programmable) | Antifuse | Antifuse | Antifuse | Antifuse | Antifuse |
关键差异点
- Industrial temperature range at standard speed grade （对比 A54SX32A-BGG329M)
- Fastest available timing on the same footprint （对比 A54SX32A-2BGG329I)
- No cross-brand drop-in exists （对比 Xilinx / Intel SRAM FPGAs)
设计说明
Supply the 2.5 V core rail with a clean local regulator and decouple at the BGA power balls with an array of 0.1 uF ceramics plus at least one bulk 10 uF capacitor. Antifuse FPGAs have low static current, but dynamic ICC scales with toggle rate, so size the core regulator using the SX-A datasheet ICC-versus-frequency curves rather than the static figure. Assign I/O bank voltages (2.5 V, 3.3 V, or 5 V) in the design software before layout so bank supply balls match the signaling plan.
For the 329-ball BGA, plan fan-out early: use 0.8 mm pitch dog-bone escapes with via-in-pad only if your stackup supports it. Follow the ball map from the SX-A datasheet package chapter and reserve access to configuration-test and programming-related balls if the board will be programmed in-circuit. This page does not reproduce the full ball map; download the official datasheet and import the vendor symbol into your CAD tool to avoid footprint errors.
Antifuse devices are one-time programmable: a bad programming run wastes the device. Freeze the design revision, use the verified Microchip programmer settings, and program golden files in production rather than engineering files. Also note that the standard speed grade may fail static timing on designs written for -1 or -2 parts; when substituting a faster grade into an existing board this is safe electrically, but never assume the reverse substitution.
合规信息
Compliance data was not present in the captured web data. This generation of BGA parts exists in both SnPb and lead-free ball variants - verify the exact ordering code on the Microchip product page Environmental section before purchase.
