AD524CDZ - Precision Instrumentation Amplifier | Analog Devices
料号: AD524CDZ ✓ 量产中AD524CDZ 概述
An instrumentation amplifier is a precision differential amplifier optimized for measuring small differential signals while rejecting large common-mode voltages. The AD524 belongs to the hierarchy of operational amplifiers, instrumentation amplifiers, analog signal-chain ICs, and semiconductor-based data-acquisition components. Its monolithic construction combines amplifier, gain-setting, and protection functions into a single device for sensor and bridge-amplifier front ends.
Programmable gain covering 1, 10, 100, and 1000 allows one amplifier design to accommodate signals spanning millivolts to volts without redesigning the analog board. Input and output offset nulling terminals support precision applications and help minimize offset-voltage changes during gain ranging. The manufacturer also describes external resistor gain programming, built-in compensation, overvoltage protection, and protection during both power-on and power-off fault conditions.
The AD524 is designed for precision data acquisition where input signals originate from strain gauges, RTDs, thermocouples, bridge transducers, and low-level process sensors. A 50 uV maximum offset keeps errors small relative to many millivolt-level sensor outputs, while the approximately 1 MHz bandwidth supports relatively slow industrial and laboratory measurement loops. The 5 V/us slew rate provides full-power-bandwidth capability for the device's operating class.
Common applications include weighing systems, pressure and force transducers, laboratory instrumentation, biomedical monitoring interfaces, and industrial process-control front ends. In each case, the differential input arrangement rejects common-mode noise present on sensor wiring, while selectable gain reduces the dynamic-range burden placed on downstream converters.
When selecting the gain configuration, verify the maximum differential input signal, input common-mode range, and output swing against the selected supply voltage. Place the amplifier close to the sensor and keep high-gain feedback traces short, because parasitic resistance and capacitance can increase noise and reduce effective bandwidth. Use the manufacturer's offset-nulling guidance rather than adding external nulling circuitry unless the application requires it.
This page combines the AD524CDZ package and performance characteristics with family-level drop-in candidates, comparison parameters, and practical design guidance for instrumentation-amplifier layouts. It also identifies the ceramic-DIP footprint, supply range, gain options, and sourcing information required during component selection.
直接替换替代料: AD524CDZ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
AD524CD
✅ 直接替换联系询价
查看数据手册 →AD524BDZ
✅ 直接替换联系询价
查看数据手册 →AD524CDZ 最大额定值与电气特性
| Product Type | Precision instrumentation amplifier |
| Number of Amplifier Circuits | 1 circuit |
| 封装 | 16-lead ceramic DIP (CDIP-16) |
| Maximum Input Offset Voltage | 50 uV |
| Bandwidth | Approximately 1 MHz |
| Slew Rate | 5 V/us |
| Supply Voltage Range | +/-6 V to +/-18 V |
| Pin-Programmable Gains | 1, 10, 100, and 1000 |
| External Resistor Gain Programming | Supported |
| Offset Nulling Terminals | Input and output offset nulling terminals |
| Input Overvoltage Protection | Protected during power-on and power-off fault conditions |
| Compensation | Built-in |
| Application Category | Precision data acquisition |
| 安装类型 | Through-hole |
| Suitable Package Options in AD524 Family | 16-lead ceramic DIP, 16-lead SBDIP, 16-lead SOIC, and 20-terminal leadless chip carrier |
AD524CDZ 16-lead ceramic dip, 16-lead sbdip, 16-lead soic, and 20-terminal leadless chip carrier 引脚配置指南
AD524CDZ(16-lead ceramic dip, 16-lead sbdip, 16-lead soic, and 20-terminal leadless chip carrier 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: AD524CDZ.
请参阅 数据手册 以查看完整引脚配置。
典型应用
AD524CDZ 适用于 6 应用s: Strain-Gauge and Load-Cell Amplification, Precision Pressure and Force Transducers, Industrial Temperature and Process Sensing, Laboratory Instrumentation and Data Acquisition, Biomedical and Physiological Signal Acquisition, Precision Weighing and Metrology Systems.
Strain-Gauge and Load-Cell Amplification
The AD524CDZ suits strain-gauge bridges and load cells whose useful output is only a few millivolts. Its 50 uV maximum input offset keeps added error small relative to typical bridge sensitivities, while gains of 1, 10, 100, and 1000 allow one analog front end to cover multiple load ranges. The differential input also helps reject common-mode voltage and pickup on sensor wiring. Place the amplifier close to the bridge, keep input loops compact, and verify that the selected supply provides adequate output swing at the chosen gain.
推荐
Precision Pressure and Force Transducers
The AD524CDZ provides the differential gain and low input offset needed for piezoresistive pressure cells and force transducers. A bridge excitation produces a small differential signal over a larger common-mode voltage, which the instrumentation amplifier is designed to reject. Programmable gain lets the designer use 10 or 100 rather than excessive gain that would amplify noise and reduce usable bandwidth. Keep bridge excitation and signal returns together, route the amplifier input differentially, and confirm output swing before fixing the gain-setting jumpers.
推荐
Industrial Temperature and Process Sensing
The AD524CDZ is appropriate for conditioning resistive temperature sensors, thermocouple interfaces, and other slow industrial process signals. Its approximately 1 MHz bandwidth is well above the signal bandwidth of most temperature loops, while the 5 V/us slew rate supports the device's operating class. The programmable gain structure allows a single amplifier to cover RTD or bridge outputs over a wide measurement range. Use the offset-nulling terminals for precision calibration, and validate the common-mode range against the sensor return and industrial ground architecture.
推荐
Laboratory Instrumentation and Data Acquisition
The AD524CDZ works well as the first analog stage in laboratory measurement systems that acquire low-level differential signals. Its precision architecture combines a 50 uV maximum input offset, selectable gain, and common-mode rejection in one device. The approximately 1 MHz bandwidth is appropriate for general-purpose analog measurement channels rather than high-speed waveform capture. For best results, place the device near the input connector or sensor, use shielded or guarded wiring, and connect the offset-nulling terminals according to the manufacturer calibration procedure.
推荐
Biomedical and Physiological Signal Acquisition
The AD524CDZ can serve as the differential input stage for low-level biomedical electrodes and physiological sensors when its supply, common-mode range, and protection requirements match the application. Differential amplification rejects the common-mode interference that is often much larger than the physiological signal, and the programmable gain accommodates widely varying electrode amplitudes. The 50 uV maximum offset is useful when the target signal is small. Medical designs still require separate patient protection, isolation, leakage-current compliance, and application-specific safety validation.
推荐
Precision Weighing and Metrology Systems
The AD524CDZ is a strong fit for platform scales, laboratory balances, and industrial weighing systems that rely on load-cell bridges. Programmable gains of 1, 10, 100, and 1000 accommodate different load ranges, and the low maximum offset helps preserve resolution at low excitation voltages. Because high-gain measurements magnify thermal drift and parasitic effects, use short shielded input paths and stable gain resistors. Confirm zero drift and offset performance over the full intended temperature range for the selected device grade.
推荐
推荐产品汇总
工程参考数据: AD524CDZ ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | AD524CD | AD524BDZ | AD524AD |
|---|---|---|---|---|
| Package | 16-lead ceramic DIP (CDIP-16) | 16-lead ceramic DIP (CDIP-16) | 16-lead ceramic DIP (CDIP-16) | 16-lead ceramic DIP (CDIP-16) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Product Type | Precision instrumentation amplifier | Precision instrumentation amplifier | Precision instrumentation amplifier | Precision instrumentation amplifier |
| Amplifier Circuits | 1 circuit | 1 circuit | 1 circuit | 1 circuit |
关键差异点
- Direct family replacement path for a ceramic-DIP footprint (对比 AD524CD)
- Multiple gain settings without changing the analog board (对比 AD524AD)
- Low offset suited to millivolt-level sensor outputs (对比 AD524BDZ)
设计说明
Route the two differential inputs as a compact pair directly from the sensor or bridge to the AD524CDZ input pins. Avoid long unshielded runs that can pickup mains-related interference, especially at gains of 100 and 1000. Keep the gain-programming connections away from high-current switching nodes and analog return paths. For stable measurements, place the amplifier close to the sensor and use a ground plane that does not carry motor, relay, or switching-converter return currents.
Check output headroom whenever the gain is increased because instrumentation-amplifier gain multiplies the differential input while the output remains limited by the supply rails. The device operates from +/-6 V to +/-18 V, but usable signal swing is narrower than the nominal supply range. Include worst-case sensor offset, bridge imbalance, and input noise when selecting the gain. Use clean, low-impedance supply connections because supply disturbances can couple into high-gain measurements.
Do not treat every AD524 suffix as automatically interchangeable. The AD524CDZ identifies a specific 16-lead ceramic-DIP ordering option, while other suffixes can change the package or temperature grade. Before substitution, compare the AD524 ordering table, pin-configuration diagram, electrical characteristics, and gain-setting method. Also verify how the offset-nulling terminals are used, because external components placed on those terminals can affect offset performance and stability.
合规信息
RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not confirmed for the AD524CDZ. AEC-Q100 is not applicable because the AD524 is an Analog Devices instrumentation amplifier rather than an automotive-qualified device.