AD534JHZ - Precision 4-Quadrant Multiplier | Analog Devices
料号: AD534JHZ ✓ 量产中AD534JHZ 概述
A four-quadrant multiplier-divider is an analog multiplier that can multiply two signals in any combination of polarity. Unlike a fixed-gain amplifier, its output changes in proportion to two independently varying input voltages. Such devices are used to implement gain control, modulation, demodulation, squaring, signal inversion, analog computation, and feedback control functions where a variable transfer characteristic is required.
The AD534 uses monolithic construction with laser trimming to establish its scale factor and improve consistency between units. An on-chip buried Zener reference supports the precision internal scale factor of 10 V. The manufacturer identifies the AD534 as a production device and emphasizes long-term stability, precision calibration, and low-noise performance as central characteristics of the family.
Electrical operation depends on the relationship between the differential multiplier inputs and the denominator or reference input. In divider service, the reference input defines the normalization condition; in multiplier service, the output follows the product of the two signal inputs. Designers should preserve the input and output common-mode ranges, observe the supply limits, and provide stable reference and feedback paths to retain multiplication accuracy.
Typical uses include precision analog signal conditioning, industrial instrumentation, control-loop scaling, laboratory interface circuits, transducer excitation and return-path processing, modulation equipment, and custom analog-computation modules. The AD534 is especially appropriate when a fixed or trimmed multiplier must provide predictable scale-factor behavior without external calibration.
PCB implementation requires attention to analog grounding, supply bypassing, and the stability of high-gain feedback connections. The TO-100 package supports conventional through-hole mounting and provides a larger thermal path than a small surface-mount package, but it still needs adequate copper area and airflow when dissipating substantial power. Confirm the complete pin assignment and operating limits in the manufacturer datasheet before layout.
This page combines the manufacturer product characterization, package information, pricing availability, application guidance, and engineering selection criteria in one reference. It also distinguishes documented AD534 family variants from true drop-in replacements so engineers can distinguish temperature-grade or package differences before approving a substitution.
直接替换替代料: AD534JHZ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: AD534JHZ (相同外形与封装尺寸) ——差异在于 Mounting Type.
该产品暂无直接替换替代料。
请求替代料AD534JHZ 规格参数
| Product Type | Monolithic four-quadrant multiplier-divider IC |
| Quadrant Capability | 4 quadrants |
| Internal Scale Factor | 10 V |
| 输出噪声 | 90 µV rms, 10 Hz to 10 kHz |
| Noise Bandwidth | 10 Hz to 10 kHz |
| 封装 | 10-pin TO-100 |
| 引脚数量 | 10 pins |
| 安装类型 | Through-hole |
| Construction | Monolithic |
| Calibration Method | Laser trimmed |
| Internal Reference | On-chip buried Zener reference |
| Production Status | Production |
AD534JHZ 10-pin to-100 引脚配置指南
AD534JHZ(10-pin to-100 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: AD534JHZ.
请参阅 数据手册 以查看完整引脚配置。
典型应用
AD534JHZ 适用于 6 应用s: Precision Industrial Signal Scaling, Analog Modulation and Demodulation, Transducer Signal Conditioning, Control Loop Product Limiter, Laboratory Analog Computation, Test and Measurement Front End.
Precision Industrial Signal Scaling
The AD534JHZ fits industrial signal-scaling circuits that require the output to vary with the product of two control and process signals. Its four-quadrant operation accommodates positive and negative input combinations, while laser-trimmed construction supports repeatable calibration across units. The 10 V internal scale factor provides a defined multiplier reference, and the 90 µV rms noise specification from 10 Hz to 10 kHz is relevant when conditioning low-level transducer signals. Install the TO-100 device on a stable analog section of the controller board, keep feedback and reference paths short, and verify that both input ranges and the output remain within the grade-specific limits.
推荐
Analog Modulation and Demodulation
The AD534JHZ can implement analog modulation by multiplying a carrier or baseband waveform with a controllable amplitude signal. Four-quadrant multiplication supports phase reversals and bipolar control signals, while the monolithically constructed multiplier reduces the number of discrete precision elements required for modulation. Its stated 90 µV rms noise over 10 Hz to 10 kHz helps set the practical noise floor for low-level modulation paths. Keep the carrier and control inputs within their specified common-mode ranges, use a low-noise reference arrangement, and route the multiplier output with short, shielded analog traces to prevent external interference from adding to the intrinsic device noise.
推荐
Transducer Signal Conditioning
The AD534JHZ is applicable to transducer interfaces in which a sensor-derived signal must be scaled by a calibration or range factor. Dividing by a controlled reference allows the output to represent a normalized measurement, while multiplying by a correction coefficient supports calibration and unit conversion. The internally trimmed AD534 architecture provides a consistent 10 V scale factor, while the laser calibration supports manufacturing repeatability. Preserve the sensor excitation reference as a low-noise node, confirm the differential input range, and provide filtering separately when needed so that protection or anti-aliasing components do not introduce excess multiplier error.
推荐
Control Loop Product Limiter
The AD534JHZ can serve as a product-forming element in analog control and feedback systems where a command variable is multiplied by a plant variable or operating factor. Four-quadrant behavior permits sign reversal and bipolar command handling, and the 10 V internal scale factor simplifies calculation around the nominal reference. Because precision multiplication can amplify errors in both factors, keep the command and feedback paths balanced and observe the output range at worst-case load. The 90 µV rms device noise from 10 Hz to 10 kHz should be included in low-level loop-noise analysis, while higher-frequency filtering should be designed around the required loop bandwidth.
推荐
Laboratory Analog Computation
The AD534JHZ supports laboratory analog-computation modules that implement multiplication, squaring, inversion, or ratio functions without a digital processor. Its monolithic and laser-trimmed construction makes it suitable as the central precision element of a bench instrument, and its four-quadrant operation permits bipolar test signals. The 10 V scale factor provides a defined basis for calibration procedures. Use stable references, low-noise supplies, and short feedback loops, and calibrate the complete module because resistor tolerances and leakage outside the multiplier may contribute system error. The 90 µV rms noise figure is directly relevant to experiments conducted within the stated 10 Hz to 10 kHz bandwidth.
推荐
Test and Measurement Front End
The AD534JHZ can form part of a precision test-and-measurement front end that applies programmable gain or normalization to an analog signal. Multiplication by a digitally derived control voltage allows the analog section to implement a digitally controlled scale without converting the measured quantity to a digital value first. The internally trimmed scale factor and low-noise construction help maintain calibration integrity, particularly when the measured signal is small. Keep the digitally controlled reference path free of switching transients, isolate sensitive analog routing from digital activity, and verify settling behavior against the bandwidth required by the measurement system.
推荐
工程参考数据: AD534JHZ ——对比、设计指导和合规信息。
选型指南
Do not select a nominal AD534 family variant solely by its base number. AD534JH, AD534JD, and AD534SH appear in cross-reference results, but package construction, temperature rating, accuracy, and ordering characteristics must be checked before substitution. No cross-brand drop-in equivalent is established by the available manufacturer and distributor records. For designs requiring a smaller footprint, lower power, wider bandwidth, or a different supply range, evaluate a modern multiplier family as a new design rather than attempting an automatic board replacement.
与替代料对比
| 参数 | 本产品 | AD534JH | AD534JD | AD534SH |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Product Function | Four-quadrant multiplier-divider | Four-quadrant multiplier-divider | Four-quadrant multiplier-divider | Four-quadrant multiplier-divider |
关键差异点
- Integrated four-quadrant precision multiplication (对比 Discrete multiplier networks using separate amplifiers and precision resistors)
- Laser-trimmed calibration (对比 Untrimmed discrete multiplier implementation)
- Documented low-noise performance (对比 General-purpose precision multiplier modules)
- On-chip buried Zener reference (对比 Multiplier circuits using an external precision reference)
设计说明
Place the AD534JHZ where the multiplier inputs, feedback components, and output trace are electrically short. Keep high-current and switching-node copper away from the input and reference pins because the multiplier can reject ripple only within its frequency-dependent limits. Use a single low-impedance analog ground region for the device and its precision resistors, and avoid routing sensitive signals beneath the TO-100 body unless the PCB stackup and ground arrangement have been evaluated.
Bypass the supply pins close to the device using the capacitance and ESR requirements specified in the manufacturer application guidance. An inadequate local bypass path can add supply noise to the 90 µV rms output-noise specification and may influence the high-gain multiplier stage. Check startup behavior, supply sequencing, and the maximum supply voltage for the exact ordering grade before energizing the circuit.
Do not treat AD534JH, AD534JD, or AD534SH as automatic replacements merely because their base numbers are identical. Confirm package construction, pin assignment, temperature grade, accuracy class, calibration method, and supply range in the ordering information. A suffix change can alter environmental qualification or mechanical construction even when the multiplier architecture remains the same.
Treat the denominator or reference input as a precision signal node because multiplier accuracy depends on the quality of that reference. Use short traces, stable reference components, and clean grounding to limit error and noise. When working with small signals, include the 90 µV rms device noise from 10 Hz to 10 kHz in the system noise budget and apply additional filtering only where it does not compromise the required measurement bandwidth.
合规信息
The manufacturer product page and data-sheet excerpts do not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status for the exact AD534JHZ ordering option. AEC-Q100 is not applicable to this analog multiplier-divider product type.